- 27 Nov, 2018 5 commits
-
-
Nicolas Saenz Julienne authored
The resulting code is way more readeable and intuitive compared to plain list_for_each. Signed-off-by:
Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Acked-by:
Stefan Wahren <stefan.wahren@i2se.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Nicolas Saenz Julienne authored
No one is using the API neither in the actual staging tree nor in the downstream tree (https://github.com/raspberrypi/linux). Signed-off-by:
-
Nicolas Saenz Julienne authored
The implementation of both IOCTLS was the same except for one function call. This joins both implementations and updates the code to avoid unneeded indentations. Signed-off-by:
-
Nicolas Saenz Julienne authored
The function is overly complicated for what it's ultimately achieving. It's simply filling up a structure. Signed-off-by:
-
Ricardo Silva authored
To comply with checkpatch. CHECK: Lines should not end with a '(' +u8 rtl_mrate_idx_to_arfr_id( Signed-off-by:Ricardo Silva <ricsilvs1@gmail.com> Signed-off-by:
-
- 26 Nov, 2018 17 commits
-
-
Cristian Sicilia authored
Some parameters are aligned with parentheses. Some parentheses was opened at end of line. Signed-off-by:
Cristian Sicilia <sicilia.cristian@gmail.com> Signed-off-by:
-
Sergio Paracuellos authored
There is no clock driver for ralink mips and clk_enable are no-ops for this architecture. This has been also tested without using clocks and seems to work so avoid to use them in this driver. Fixes: ad9c87e1: "staging: mt7621-pci: parse and init port data from device tree" Reported-by:
NeilBrown <neil@brown.name> Signed-off-by:
Sergio Paracuellos <sergio.paracuellos@gmail.com> Tested-by:
-
Sergio Paracuellos authored
Depending of chip revision reset lines are inverted. It is also necessary to read PCIE_FTS_NUM register before enabling the phy. Hence update the code to achieve this. Fixes: 745eeeac ("staging: mt7621-pci: factor out 'mt7621_pcie_enable_port' function") Reported-by:
-
Sergio Paracuellos authored
The sysctl register are already claimed by palmbus, so pci fails to claim it. Device tree has been updated to not use it at all with pcie. Update bindings documentation. Signed-off-by:
-
Sergio Paracuellos authored
The sysctl register are already claimed by palmbus, so pci fails to claim it. Remove registers accordly from DT bindings. Fixes: 624c5227: staging: mt7621-dts: add sysctl registers base address to pcie Reported-by:
-
Sergio Paracuellos authored
The sysctl register are already claimed by palmbus, so pci fails to claim it. The best way to access the sysc registers is to use rt_sysc_[rwm]32(). Fixes: 89e9f6e6: staging: mt7621-pci: remap and use sysctl from device tree Reported-by:
-
Michael Straube authored
Add a test for successful call to cdev_alloc() to avoid potential null dereference. Issue reported by smatch. Signed-off-by:
Michael Straube <straube.linux@gmail.com> Fixes: 874bcba6 ("staging: pi433: New driver") Signed-off-by:
-
Wen Yang authored
The null check on &padapter->registrypriv is redundant since registrypriv is a struct inside padapter and can never be null, so the check is always true. we may remove it. Signed-off-by:
Wen Yang <wen.yang99@zte.com.cn> CC: devel@driverdev.osuosl.org CC: linux-kernel@vger.kernel.org Signed-off-by:
-
Michael Straube authored
Cleanup lines over 80 characters by replacing tabs with spaces or adding appropriate line breaks. Signed-off-by:
-
Michael Straube authored
Correct indentation to clear a checkpatch warning. WARNING: suspect code indent for conditional statements (8, 24) Signed-off-by:
-
Michael Straube authored
Remove return from a void function to clear a checkpatch warning. WARNING: void function return statements are not generally useful Signed-off-by:
-
Michael Straube authored
Refactor if else statement to clear checkpatch warnings. WARNING: else is not generally useful after a break or return WARNING: line over 80 characters Signed-off-by:
-
Michael Straube authored
Replace tabs with spaces, remove spaces, remove blank lines and break lines appropriatly in declarations. Signed-off-by:
-
Michael Straube authored
The function rtw_android_set_block() just returns zero. The only user is the function rtw_android_priv_cmd(). The variable bytes_written is initialized to zero and not changed before the use of rtw_android_set_block(). Remove rtw_android_set_block() and it's only use. Signed-off-by:
-
Michael Straube authored
Use __func__ instead of hardcoded function names. Reported by checkpatch. Signed-off-by:
-
Michael Straube authored
Remove unnecessary parentheses reported by checkpatch. Signed-off-by:
-
Michael Straube authored
Cleanup remaining comparsions to true. if (x == true) -> if (x) if (x != true) -> if (!x) if (!x == true) -> if (!x) Signed-off-by:
-
- 23 Nov, 2018 18 commits
-
-
Ricardo Reis Marques Silva authored
Issue found by checkpatch. CHECK: Prefer kernel type 'u32' over 'uint32_t' +static const uint32_t vbox_cursor_plane_formats[] = { CHECK: Prefer kernel type 'u32' over 'uint32_t' +static const uint32_t vbox_primary_plane_formats[] = { CHECK: Prefer kernel type 'u32' over 'uint32_t' + const uint32_t *formats; Signed-off-by:Ricardo Reis Marques Silva <ricardormsilva93@gmail.com> Signed-off-by:
-
Michael Straube authored
The local variable ret is only used to test the return value of the call to rtl8188eu_xmitframe_complete(). Use the function directly in the if test and remove the variable ret. Signed-off-by:
-
Michael Straube authored
Replace tabs with spaces and/or remove spaces in declarations to cleanup whitespace. Signed-off-by:
-
Michael Straube authored
Add spaces around '>>' and '&' to follow kernel coding style. Reported by checkpatch. Signed-off-by:
-
Michael Straube authored
Remove unnecessary parentheses in usb_ops_linux.c. Reported by checkpatch. Signed-off-by:
-
Michael Straube authored
Correct spelling mistake in a comment reported by checkpatch. checksumed -> checksummed Signed-off-by:
-
Michael Straube authored
Remove braces from single line if else statement. Reported by checkpatch. Signed-off-by:
-
Michael Straube authored
Cleanup line ending with a '(' to follow kernel coding style. Reported by checkpatch. Signed-off-by: -
Michael Straube authored
Use __func__ instead of hardcoded function names. Reported by checkpatch. Signed-off-by:
-
Gao Xiang authored
Previously, 2 members called `initial' and `cachedzone_la' are used for applying caching policy (whether the workgroup is at either end), which are hard to understand, rename them to `backmost' and `headoffset'. Reviewed-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Gao Xiang <gaoxiang25@huawei.com> Signed-off-by:
-
Gao Xiang authored
For the case of nr_to_read == lookahead_size, it is better to decompress asynchronously as well since no page will be needed immediately. Reviewed-by:
-
Gao Xiang authored
Let's make sure that the one registering a workgroup will also take the primary work lock at first for two reasons: 1) There's no need to introduce such a race window (and consequently overhead) between registering and locking, other tasks could break in by chance, and the race seems unnecessary (no benefit at all); 2) It's better to take the primary work when a workgroup is registered to apply the cache managed policy, for example, if some other tasks break in, it could turn into the in-place decompression rather than use as the cached decompression. Reviewed-by: -
Gao Xiang authored
`z_erofs_vle_workgroup' is heavily generated in the decompression, for example, it resets 32 bytes redundantly for 64-bit platforms even through Z_EROFS_VLE_INLINE_PAGEVECS + Z_EROFS_CLUSTER_MAX_PAGES, default 4, pages are stored in `z_erofs_vle_workgroup'. As an another example, `struct mutex' takes 72 bytes for our kirin 64-bit platforms, it's unnecessary to be reseted at first and be initialized each time. Let's avoid filling all `z_erofs_vle_workgroup' with 0 at first since most fields are reinitialized to meaningful values later, and pagevec is no need to initialized at all. Reviewed-by:
-
Gao Xiang authored
Just like other generic locks, insert a full barrier in case of memory reorder. Reviewed-by:
-
Gao Xiang authored
There are two minor issues in the current freeze interface: 1) Freeze interfaces have not related with CONFIG_DEBUG_SPINLOCK, therefore fix the incorrect conditions; 2) For SMP platforms, it should also disable preemption before doing atomic_cmpxchg in case that some high priority tasks preempt between atomic_cmpxchg and disable_preempt, then spin on the locked refcount later. Reviewed-by: -
Gao Xiang authored
It's better to use atomic_cond_read_relaxed, which is implemented in hardware instructions to monitor a variable changes currently for ARM64, instead of open-coded busy waiting. Reviewed-by:
-
Gao Xiang authored
When the managed cache is enabled, the last reference count of a workgroup must be used for its workstation. Otherwise, it could lead to incorrect (un)freezes in the reclaim path, and it would be harmful. A typical race as follows: Thread 1 (In the reclaim path) Thread 2 workgroup_freeze(grp, 1) refcnt = 1 ... workgroup_unfreeze(grp, 1) refcnt = 1 workgroup_get(grp) refcnt = 2 (x) workgroup_put(grp) refcnt = 1 (x) ...unexpected behaviors * grp is detached but still used, which violates cache-managed freeze constraint. Reviewed-by: -
Gao Xiang authored
It's better not to positively BUG_ON the kernel, however developers need a way to locate issues as soon as possible. DBG_BUGON is introduced and it could only crash when EROFS_FS_DEBUG (EROFS developping feature) is on. It is helpful for developers to find and solve bugs quickly by eng builds. Previously, DBG_BUGON is defined as ((void)0) if EROFS_FS_DEBUG is off, but some unused variable warnings as follows could occur: drivers/staging/erofs/unzip_vle.c: In function `init_alway:': drivers/staging/erofs/unzip_vle.c:61:33: warning: unused variable `work' [-Wunused-variable] struct z_erofs_vle_work *const work = ^~~~ Fix it to #define DBG_BUGON(x) ((void)(x)). Reviewed-by:
-
