- 09 Jun, 2021 6 commits
-
-
Lyude Paul authored
Get rid of the extraneous switch case in here, and just open code edp_backlight_mode as we only ever use it once. v4: * Check that backlight mode is DP_EDP_BACKLIGHT_CONTROL_MODE_DPCD, not DP_EDP_BACKLIGHT_CONTROL_MODE_MASK - imirkin Signed-off-by:
Lyude Paul <lyude@redhat.com> Reviewed-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210514181504.565252-4-lyude@redhat.com
-
Lyude Paul authored
This is kind of an annoying aspect of DRM's DP helpers: drm_dp_dpcd_readb/writeb() return the size of bytes read/written on success, thus we want to check against that instead of checking if the return value is less than 0. I'll probably be fixing this in the near future once I start doing DP work again, also because I'd rather not mix a tree-wide refactor like that in with a patch series intended to be around introducing DP backlight helpers. So, for now let's just handle the return values from each function correctly. Signed-off-by:
-
Lyude Paul authored
Noticed this while moving all of the VESA backlight code in i915 over to DRM helpers: it would appear that we calculate the frequency value we want to write to DP_EDP_BACKLIGHT_FREQ_SET twice even though this value never actually changes during runtime. So, let's simplify things by just caching this value in intel_panel.backlight, and re-writing it as-needed. Changes since v1: * Wrap panel->backlight.edp.vesa.pwm_freq_pre_divider in DP_EDP_BACKLIGHT_FREQ_AUX_SET_CAP check - Jani Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210514181504.565252-2-lyude@redhat.com
-
Marek Vasut authored
Fix the following sparse warnings generated by "make C=1": drivers/gpu/drm/bridge/ti-sn65dsi83.c:429:13: warning: incorrect type in assignment (different base types) drivers/gpu/drm/bridge/ti-sn65dsi83.c:429:13: expected unsigned short [assigned] [usertype] val drivers/gpu/drm/bridge/ti-sn65dsi83.c:429:13: got restricted __le16 [usertype] drivers/gpu/drm/bridge/ti-sn65dsi83.c:432:13: warning: incorrect type in assignment (different base types) drivers/gpu/drm/bridge/ti-sn65dsi83.c:432:13: expected unsigned short [addressable] [assigned] [usertype] val drivers/gpu/drm/bridge/ti-sn65dsi83.c:432:13: got restricted __le16 [usertype] drivers/gpu/drm/bridge/ti-sn65dsi83.c:436:13: warning: incorrect type in assignment (different base types) drivers/gpu/drm/bridge/ti-sn65dsi83.c:436:13: expected unsigned short [addressable] [assigned] [usertype] val drivers/gpu/drm/bridge/ti-sn65dsi83.c:436:13: got restricted __le16 [usertype] drivers/gpu/drm/bridge/ti-sn65dsi83.c:438:13: warning: incorrect type in assignment (different base types) drivers/gpu/drm/bridge/ti-sn65dsi83.c:438:13: expected unsigned short [addressable] [assigned] [usertype] val drivers/gpu/drm/bridge/ti-sn65dsi83.c:438:13: got restricted __le16 [usertype] drivers/gpu/drm/bridge/ti-sn65dsi83.c:441:13: warning: incorrect type in assignment (different base types) drivers/gpu/drm/bridge/ti-sn65dsi83.c:441:13: expected unsigned short [addressable] [assigned] [usertype] val drivers/gpu/drm/bridge/ti-sn65dsi83.c:441:13: got restricted __le16 [usertype] Signed-off-by:
Marek Vasut <marex@denx.de> Cc: Adam Ford <aford173@gmail.com> Cc: Douglas Anderson <dianders@chromium.org> Cc: Frieder Schrempf <frieder.schrempf@kontron.de> Cc: Jagan Teki <jagan@amarulasolutions.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Loic Poulain <loic.poulain@linaro.org> Cc: Marek Vasut <marex@denx.de> Cc: Philippe Schenker <philippe.schenker@toradex.com> Cc: Robert Foss <robert.foss@linaro.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Stephen Boyd <swboyd@chromium.org> Cc: Valentin Raevsky <valentin@compulab.co.il> To: dri-devel@lists.freedesktop.org Signed-off-by:
Robert Foss <robert.foss@linaro.org> Reviewed-by:
-
Nirmoy Das authored
Use ttm_bo_move_null() instead of ttm_bo_assign_mem(). Signed-off-by:
Nirmoy Das <nirmoy.das@amd.com> Reviewed-by:
Christian König <christian.koenig@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210608181306.90008-1-nirmoy.das@amd.comSigned-off-by:
-
Colin Ian King authored
The object surf is not fully initialized and the uninitialized field surf.data is being copied by the call to qxl_bo_create via the call to qxl_gem_object_create. Set surf.data to zero to ensure garbage data from the stack is not being copied. Addresses-Coverity: ("Uninitialized scalar variable") Fixes: f64122c1 ("drm: add new QXL driver. (v1.4)") Signed-off-by:Colin Ian King <colin.king@canonical.com> Link: http://patchwork.freedesktop.org/patch/msgid/20210608161313.161922-1-colin.king@canonical.comSigned-off-by:
Gerd Hoffmann <kraxel@redhat.com>
-
- 08 Jun, 2021 6 commits
-
-
Marek Vasut authored
There is not much value in the extra conversion step, the calculations required for the LTDC IP are different than what is used in the drm_display_mode_to_videomode(), so just do the right ones in the LTDC driver right away. Signed-off-by:
Yannick Fertré <yannick.fertre@st.com> Signed-off-by:
Philippe Cornu <philippe.cornu@foss.st.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210607172457.14471-1-marex@denx.de
-
Marek Vasut authored
Fix checkpatch.pl --strict -f drivers/gpu/drm/bridge/ti-sn65dsi83.c CHECKs, no functional change. This is the same modification done to V7 of the original patch. Signed-off-by:
-
Christian König authored
We discussed if that is really the right approach for quite a while now, but digging deeper into a bug report on arm turned out that this is actually horrible broken right now. The reason for this is that vmf_insert_mixed_prot() always tries to grab a reference to the underlaying page on architectures without ARCH_HAS_PTE_SPECIAL and as far as I can see also enabled GUP. So nuke using VM_MIXEDMAP here and use VM_PFNMAP instead. Also make sure to reject mappings without VM_SHARED. v2: reject COW mappings, merge function with only caller v3: adjust comment as suggested by Thomas Signed-off-by:
Thomas Hellström <thomas.hellstrom@linux.intel.com>
-
Marek Vasut authored
Add driver for TI SN65DSI83 Single-link DSI to Single-link LVDS bridge and TI SN65DSI84 Single-link DSI to Dual-link or 2x Single-link LVDS bridge. TI SN65DSI85 is unsupported due to lack of hardware to test on, but easy to add. The driver operates the chip via I2C bus. Currently the LVDS clock are always derived from DSI clock lane, which is the usual mode of operation. Support for clock from external oscillator is not implemented, but it is easy to add if ever needed. Only RGB888 pixel format is implemented, the LVDS666 is not supported, but could be added if needed. Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
Frieder Schrempf <frieder.schrempf@kontron.de> Tested-by:
Adam Ford <aford173@gmail.com> Signed-off-by:
-
Marek Vasut authored
Add DT binding document for TI SN65DSI83 and SN65DSI84 DSI to LVDS bridge. Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Christian König authored
We need to make sure to allocate the sys_mem resource before the point of no return. v2: add missing return value checking, also handle idle case Signed-off-by:
-
- 07 Jun, 2021 15 commits
-
-
Christian König authored
After we moved the resource to the ghost the bo->resource pointer needs to be reset since the owner of the resource is now the ghost. Signed-off-by:
-
Christian König authored
The resource is not allocated yet, so no chance that this will work. Use the placement instead. Signed-off-by:
-
Deepak Rawat authored
Maintainer for hyperv synthetic video device. Signed-off-by:
Deepak Rawat <drawat.floss@gmail.com> Acked-by:
Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210527112230.1274-3-drawat.floss@gmail.com
-
Deepak Rawat authored
Virtual device inform if screen update is needed or not with SYNTHVID_FEATURE_CHANGE message. Handle this message to set dirt_needed flag. Suggested-by:
Dexuan Cui <decui@microsoft.com> Signed-off-by:
-
Deepak Rawat authored
DRM driver for hyperv synthetic video device, based on hyperv_fb framebuffer driver. Also added config option "DRM_HYPERV" to enabled this driver. v2: - Add support for gen2 VM - Fixed review comments v3: - Split into multiple files as suggested by Thomas Zimmermann - Fixed hibernation issue as suggested by Dexuan Cui - Use ioremap_cache as suggested by Dexuan Cui - Incorporated other review comments v4: - Fix bitrotted code - Review comments - Updated the copyright and license to match hyperv_fb v5: - Address review comments and rebased with drm-misc-next v6: - Minor code/comment improvement as suggested by Dexuan Cui Signed-off-by:
-
Thomas Hellström authored
We are calling the eviction_valuable driver callback at eviction time to determine whether we actually can evict a buffer object. The upcoming i915 TTM backend needs the same functionality for swapout, and that might actually be beneficial to other drivers as well. Add an eviction_valuable call also in the swapout path. Try to keep the current behaviour for all drivers by returning true if the buffer object is already in the TTM_PL_SYSTEM placement. We change behaviour for the case where a buffer object is in a TT backed placement when swapped out, in which case the drivers normal eviction_valuable path is run. Reviewed-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Christian König <christian.koenig@amd.com> Signed-off-by:
-
Thomas Hellström authored
If the bo is idle when calling ttm_bo_pipeline_gutting(), we unnecessarily create a ghost object and push it out to delayed destroy. Fix this by adding a path for idle, and document the function. Also avoid having the bo end up in a bad state vulnerable to user-space triggered kernel BUGs if the call to ttm_tt_create() fails. Finally reuse ttm_bo_pipeline_gutting() in ttm_bo_evict(). Cc: Christian König <christian.koenig@amd.com> Signed-off-by:
-
Thomas Hellström authored
Use fast wc memcpy for reading out of wc memory for TTM bo moves. Cc: Dave Airlie <airlied@gmail.com> Cc: Christian König <christian.koenig@amd.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Thomas Hellström authored
Reading out of write-combining mapped memory is typically very slow since the CPU doesn't prefetch. However some archs have special instructions to do this. So add a best-effort memcpy_from_wc taking dma-buf-map pointer arguments that attempts to use a fast prefetching memcpy and otherwise falls back to ordinary memcopies, taking the iomem tagging into account. The code is largely copied from i915_memcpy_from_wc. Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Christian König <christian.koenig@amd.com> Suggested-by:
Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Thomas Hellström authored
The internal ttm_bo_util memcpy uses ioremap functionality, and while it probably might be possible to use it for copying in- and out of sglist represented io memory, using io_mem_reserve() / io_mem_free() callbacks, that would cause problems with fault(). Instead, implement a method mapping page-by-page using kmap_local() semantics. As an additional benefit we then avoid the occasional global TLB flushes of ioremap() and consuming ioremap space, elimination of a critical point of failure and with a slight change of semantics we could also push the memcpy out async for testing and async driver development purposes. A special linear iomem iterator is introduced internally to mimic the old ioremap behaviour for code-paths that can't immediately be ported over. This adds to the code size and should be considered a temporary solution. Looking at the code we have a lot of checks for iomap tagged pointers. Ideally we should extend the core memremap functions to also accept uncached memory and kmap_local functionality. Then we could strip a lot of code. Cc: Christian König <christian.koenig@amd.com> Signed-off-by:
-
Christian König authored
This occasions was missed during the recent rename of the function. Signed-off-by:
kernel test robot <lkp@intel.com> Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210607070658.11586-1-christian.koenig@amd.com
-
Piotr Oniszczuk authored
Currently only linear formats are supported in sun4i-drm driver, but SoCs like H6 supports AFBC variant of some of them in multiple cores (GPU, VPU, DE3). Panfrost already implements AFBC compression and is sometimes confused what should be default choice (linear, AFBC) if DRM driver is not explicit about modifier support (MiniMyth2 distro with MythTV app). After some discussion with Daniel Stone on #panfrost IRC, it was decided to make modifiers in sun4i-drm explicit, to avoid any kind of guessing, not just in panfrost, but everywhere. In fact, long term idea is to make modifier parameter in drm_universal_plane_init() mandatory (non NULL). Signed-off-by:
Piotr Oniszczuk <piotr.oniszczuk@gmail.com> Signed-off-by:
Jernej Skrabec <jernej.skrabec@gmail.com> Acked-by:
Daniel Stone <daniels@collabora.com> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Link: https://patchwork.freedesktop.org/patch/msgid/20210605073534.3786194-1-jernej.skrabec@gmail.com
-
Maxime Ripard authored
The new gpiod interface takes care of parsing the GPIO flags and to return the logical value when accessing an active-low GPIO, so switching to it simplifies a lot the driver. Signed-off-by:
-
Maxime Ripard authored
If the of_get_named_gpio_flags call fails in vc4_hdmi_bind, we jump to the err_unprepare_hsm label. That label will then call pm_runtime_disable and put_device on the DDC device. We just retrieved the DDC device, so the latter is definitely justified. However at that point we still haven't called pm_runtime_enable, so the call to pm_runtime_disable is not supposed to be there. Fixes: 10ee275c ("drm/vc4: prepare for CEC support") Signed-off-by:
-
Christian König authored
That somehow got missing. Signed-off-by:
-
- 06 Jun, 2021 4 commits
-
-
Christian König authored
The functions can be called both in _rcu context as well as while holding the lock. v2: add some kerneldoc as suggested by Daniel v3: fix indentation Signed-off-by:
Jason Ekstrand <jason@jlekstrand.net> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20210602111714.212426-7-christian.koenig@amd.com
-
Christian König authored
That describes much better what the function is doing here. Signed-off-by:
-
Christian König authored
When the comment needs to state explicitly that this is doesn't get a reference to the object then the function is named rather badly. Rename the function and use it in even more places. v2: use dma_resv_shared_list as new name Signed-off-by:
-
Christian König authored
When the comment needs to state explicitly that this doesn't get a reference to the object then the function is named rather badly. Rename the function and use rcu_dereference_check(), this way it can be used from both rcu as well as lock protected critical sections. v2: improve kerneldoc as suggested by Daniel v3: use dma_resv_excl_fence as function name Signed-off-by:
-
- 05 Jun, 2021 1 commit
-
-
Christian König authored
The newly added dma_resv_reset_shared_max() is used from an inline function, so it can appear in drivers as well. Signed-off-by:
-
- 04 Jun, 2021 8 commits
-
-
Alyssa Rosenzweig authored
The value of the AFBC_FEATURES register is required by userspace to determine AFBC support on Bifrost. A user on our IRC channel (#panfrost) reported a workload that raised a fault on one system's Mali G31 but worked flawlessly with another system's Mali G31. We determined the cause to be missing AFBC support on one vendor's Mali implementation -- it turns out AFBC is optional on Bifrost! Whether AFBC is supported or not is exposed in the AFBC_FEATURES register on Bifrost, which reads back as 0 on Midgard. A zero value indicates AFBC is fully supported, provided the architecture itself supports AFBC, allowing backwards-compatibility with Midgard. Bits 0 and 15 indicate that AFBC support is absent for texturing and rendering respectively. The user experiencing the fault reports that AFBC_FEATURES reads back 0x10001 on their system, confirming the architectural lack of AFBC. Userspace needs this parameter to know to disable AFBC on that chip, and perhaps others. v2: Fix typo from copy-paste fail. v3: Bump the UABI version. This commit was cherry-picked from another series so chalking this up to a rebase fail. Signed-off-by:
Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com> Reviewed-by:
Steven Price <steven.price@arm.com> Cc: Rob Herring <robh@kernel.org> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Signed-off-by:
-
Christian König authored
Instead of both driver and TTM allocating memory finalize embedding the ttm_resource object as base into the driver backends. v2: fix typo in vmwgfx grid mgr and double init in amdgpu_vram_mgr.c Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210602100914.46246-10-christian.koenig@amd.com
-
Christian König authored
Similar to the TTM range manager. Signed-off-by:
-
Christian König authored
Similar to the TTM range manager. Signed-off-by:
-
Christian König authored
Similar to the TTM range manager. Signed-off-by:
-
Christian König authored
Similar to the TTM range manager. Signed-off-by:
-
Christian König authored
Access to the mm_node is now forbidden. So instead of hand wiring that use the cursor functionality. v2: fix handling as pointed out by Philip. Signed-off-by:
-
Christian König authored
TTM is going to need this again since we are moving the resource allocation into the backend. Signed-off-by:
-
