Pull MIPS fix from Ralf Baechle:
 "Just one fix.  The stack protector was loading the value of the canary
  instead of its address"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: stack protector: Fix per-task canary switch

Pull drm fixes from Dave Airlie:
 "All over the map..

   - nouveau:
     disable MSI, needs more work, will try again next merge window
   - radeon:
      audio + uvd regression fixes, dpm fixes, reset fixes
   - i915:
     the dpms fix might fix your haswell

  And one pain in the ass revert, so we have VGA arbitration that when
  implemented 4-5 years ago really hoped that GPUs could remove
  themselves from arbitration completely once they had a kernel driver.

  It seems Intel hw designers decided that was too nice a facility to
  allow us to have so they removed it when they went on-die (so since
  Ironlake at least).  Now Alex Williamson added support for VGA
  arbitration for newer GPUs however this now exposes itself to
  userspace as requireing arbitration of GPU VGA regions and the X
  server gets involved and disables things that it can't handle when VGA
  access is possibly required around every operation.

  So in order to not break userspace we just reverted things back to the
  old known broken status so maybe we can try and design out way out.

  Ville also had a patch to use stop machine for the two times Intel
  needs to access VGA space, that might be acceptable with some rework,
  but for now myself and Daniel agreed to just go back"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (23 commits)
  Revert "i915: Update VGA arbiter support for newer devices"
  Revert "drm/i915: Delay disabling of VGA memory until vgacon->fbcon handoff is done"
  drm/radeon: re-enable sw ACR support on pre-DCE4
  drm/radeon/dpm: disable bapm on TN asics
  drm/radeon: improve soft reset on CIK
  drm/radeon: improve soft reset on SI
  drm/radeon/dpm: off by one in si_set_mc_special_registers()
  drm/radeon/dpm/btc: off by one in btc_set_mc_special_registers()
  drm/radeon: forever loop on error in radeon_do_test_moves()
  drm/radeon: fix hw contexts for SUMO2 asics
  drm/radeon: fix typo in CP DMA register headers
  drm/radeon/dpm: disable multiple UVD states
  drm/radeon: use hw generated CTS/N values for audio
  drm/radeon: fix N/CTS clock matching for audio
  drm/radeon: use 64-bit math to calculate CTS values for audio (v2)
  drm/edid: catch kmalloc failure in drm_edid_to_speaker_allocation
  Revert "drm/fb-helper: don't sleep for screen unblank when an oops is in progress"
  drm/gma500: fix things after get/put page helpers
  drm/nouveau/mc: disable msi support by default, it's busted in tons of places
  drm/i915: Only apply DPMS to the encoder if enabled
  ...

This reverts commit 81b5c7bc.

Adding drm/i915 into the vga arbiter chain means that X (in a piece of
well-meant paranoia) will do a get/put on the vga decoding around
_every_ accel call down into the ddx. Which results in some nice
performance disasters [1]. This really breaks userspace, by disabling
DRI for everyone, and stops OpenGL from working, this isn't limited
to just the i915 but both the integrated and discrete GPUs on
multi-gpu systems, in other words this causes untold worlds of pain,

Ville tried to come up with a Great Hack to fiddle the required VGA
I/O ops behind everyone's back using stop_machine, but that didn't
really work out [2]. Given that we're fairly late in the -rc stage for
such games let's just revert this all.

One thing we might want to keep is to delay the disabling of the vga
decoding until the fbdev emulation and the fbcon screen is set up. If
we kill vga mem decoding beforehand fbcon can end up with a white
square in the top-left corner it tried to save from the vga memory for
a seamless transition. And we have bug reports on older platforms
which seem to match these symptoms.

But again that's something to play around with in -next.

References: [1] http://lists.x.org/archives/xorg-devel/2013-September/037763.html
References: [2] http://www.spinics.net/lists/intel-gfx/msg34062.html
Cc: Alex Williamson <alex.williamson@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

This reverts commit 6e1b4fda.

This is part of a revert due to a userspace breakage, better explained in the revert of 1a1a4cbf4906a13c0c377f708df5d94168e7b582.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Regression fixes for audio and UVD, several hang fixes,
some DPM fixes.

* 'drm-fixes-3.12' of git://people.freedesktop.org/~agd5f/linux:
  drm/radeon: re-enable sw ACR support on pre-DCE4
  drm/radeon/dpm: disable bapm on TN asics
  drm/radeon: improve soft reset on CIK
  drm/radeon: improve soft reset on SI
  drm/radeon/dpm: off by one in si_set_mc_special_registers()
  drm/radeon/dpm/btc: off by one in btc_set_mc_special_registers()
  drm/radeon: forever loop on error in radeon_do_test_moves()
  drm/radeon: fix hw contexts for SUMO2 asics
  drm/radeon: fix typo in CP DMA register headers
  drm/radeon/dpm: disable multiple UVD states
  drm/radeon: use hw generated CTS/N values for audio
  drm/radeon: fix N/CTS clock matching for audio
  drm/radeon: use 64-bit math to calculate CTS values for audio (v2)
  drm/edid: catch kmalloc failure in drm_edid_to_speaker_allocation

Commit c0f04d88 ("bcache: Fix flushes in writeback mode") was fixing
a reported data corruption bug, but it seems some last minute
refactoring or rebasing introduced a null pointer deref.
Signed-off-by: Kent Overstreet <kmo@daterainc.com>
Cc: linux-stable <stable@vger.kernel.org> # >= v3.10
Reported-by: Gabriel de Perthuis <g2p.code@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull hwmon fix from Guenter Roeck:
 "Fix root cause of crash/error seen in applesmc driver"

* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
  hwmon: (applesmc) Always read until end of data

Pull kbuild fix from Michal Marek:
 "Here is an ARM Makefile fix that you even acked.  After nobody wanted
  to take it, it ended up in the kbuild tree"

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
  arm, kbuild: make "make install" not depend on vmlinux

Pull watchdog fix from Wim Van Sebroeck:
 "Make sure that the hpwdt driver will not load auxilary iLO devices"

* git://www.linux-watchdog.org/linux-watchdog:
  watchdog: hpwdt: Patch to ignore auxilary iLO devices

Useful for locating buggy drivers on kernel oops.

It may add dozens of new lines to boot dmesg. DEBUG_KOBJECT_RELEASE is
hopefully only enabled in debug kernels (like maybe the Fedora rawhide
one, or at developers), so being a bit more verbose is likely ok.
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch is to prevent hpwdt from loading on any auxilary iLO devices defined
after the initial (or main) iLO device. All auxilary iLO devices will have a
subsystem device ID set to 0x1979 in order for hpwdt to differentiate between
the two types.
Signed-off-by: Thomas Mingarelli <thomas.mingarelli@hp.com>
Tested-by: Lisa Mitchell <lisa.mitchell@hp.com>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

Pull /dev/random changes from Ted Ts'o:
 "These patches are designed to enable improvements to /dev/random for
  non-x86 platforms, in particular MIPS and ARM"

* tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
  random: allow architectures to optionally define random_get_entropy()
  random: run random_int_secret_init() run after all late_initcalls

Pull kvm fixes from Paolo Bonzini:
 "Fixes for 3.12-rc5: two old PPC bugs and one new (3.12-rc2) x86 bug"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  kvm: ppc: booke: check range page invalidation progress on page setup
  KVM: PPC: Book3S HV: Fix typo in saving DSCR
  KVM: nVMX: fix shadow on EPT

Pull spi fixes from Mark Brown:
 "This is all driver updates, mostly fixes for error handling paths
  except for the s3c64xx and hspi fixes for trying to use runtime PM
  before it is enabled and the pxa2xx fix for interactions between power
  management and interrupt handling"

* tag 'spi-v3.12-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: atmel: Fix incorrect error path
  spi/hspi: fixup Runtime PM enable timing
  spi/s3c64xx: Ensure runtime PM is enabled prior to registration
  spi/clps711x: drop clk_put for devm_clk_get in spi_clps711x_probe()
  spi: fix return value check in dspi_probe()
  spi: mpc512x: fix error return code in mpc512x_psc_spi_do_probe()
  spi: clps711x: Don't call kfree() after spi_master_put/spi_unregister_master
  spi/pxa2xx: check status register as well to determine if the device is off

Allow architectures which have a disabled get_cycles() function to
provide a random_get_entropy() function which provides a fine-grained,
rapidly changing counter that can be used by the /dev/random driver.

For example, an architecture might have a rapidly changing register
used to control random TLB cache eviction, or DRAM refresh that
doesn't meet the requirements of get_cycles(), but which is good
enough for the needs of the random driver.
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: stable@vger.kernel.org

Pull MTD fixes from Brian Norris:
 - fix a small memory leak in some new ONFI code
 - account for additional odd variations of Micron SPI flash

Acked by David Woodhouse.

* tag 'for-linus-20131008' of git://git.infradead.org/linux-mtd:
  mtd: m25p80: Fix 4 byte addressing mode for Micron devices.
  mtd: nand: fix memory leak in ONFI extended parameter page

HW ACR support may have issues on some older chips, so
use SW ACR for now until we've tested further.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CC: Rafał Miłecki <zajec5@gmail.com>

When the MM code is invalidating a range of pages, it calls the KVM
kvm_mmu_notifier_invalidate_range_start() notifier function, which calls
kvm_unmap_hva_range(), which arranges to flush all the TLBs for guest pages.
However, the Linux PTEs for the range being flushed are still valid at
that point.  We are not supposed to establish any new references to pages
in the range until the ...range_end() notifier gets called.
The PPC-specific KVM code doesn't get any explicit notification of that;
instead, we are supposed to use mmu_notifier_retry() to test whether we
are or have been inside a range flush notifier pair while we have been
referencing a page.

This patch calls the mmu_notifier_retry() while mapping the guest
page to ensure we are not referencing a page when in range invalidation.

This call is inside a region locked with kvm->mmu_lock, which is the
same lock that is called by the KVM MMU notifier functions, thus
ensuring that no new notification can proceed while we are in the
locked region.
Signed-off-by: Bharat Bhushan <bharat.bhushan@freescale.com>
Acked-by: Alexander Graf <agraf@suse.de>
[Backported to 3.12 - Paolo]
Reviewed-by: Bharat Bhushan <bharat.bhushan@freescale.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

This fixes a typo in the code that saves the guest DSCR (Data Stream
Control Register) into the kvm_vcpu_arch struct on guest exit.  The
effect of the typo was that the DSCR value was saved in the wrong place,
so changes to the DSCR by the guest didn't persist across guest exit
and entry, and some host kernel memory got corrupted.

Cc: stable@vger.kernel.org [v3.1+]
Signed-off-by: Paul Mackerras <paulus@samba.org>
Acked-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

72f85795 broke shadow on EPT. This patch reverts it and fixes PAE
on nEPT (which reverted commit fixed) in other way.

Shadow on EPT is now broken because while L1 builds shadow page table
for L2 (which is PAE while L2 is in real mode) it never loads L2's
GUEST_PDPTR[0-3].  They do not need to be loaded because without nested
virtualization HW does this during guest entry if EPT is disabled,
but in our case L0 emulates L2's vmentry while EPT is enables, so we
cannot rely on vmcs12->guest_pdptr[0-3] to contain up-to-date values
and need to re-read PDPTEs from L2 memory. This is what kvm_set_cr3()
is doing, but by clearing cache bits during L2 vmentry we drop values
that kvm_set_cr3() read from memory.

So why the same code does not work for PAE on nEPT? kvm_set_cr3()
reads pdptes into vcpu->arch.walk_mmu->pdptrs[]. walk_mmu points to
vcpu->arch.nested_mmu while nested guest is running, but ept_load_pdptrs()
uses vcpu->arch.mmu which contain incorrect values. Fix that by using
walk_mmu in ept_(load|save)_pdptrs.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Causes hangs on certain boards.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=70053Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Disable CG/PG before resetting.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Disable CG/PG and stop the rlc before resetting.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

These checks should be ">=" instead of ">".  j is used as an offset into
the table->mc_reg_address[] array and that has
SMC_SISLANDS_MC_REGISTER_ARRAY_SIZE (16) elements.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

It should be ">=" instead of ">" here.  The table->mc_reg_address[]
array has SMC_EVERGREEN_MC_REGISTER_ARRAY_SIZE (16) elements.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

The error path does this:

	for (--i; i >= 0; --i) {

which is a forever loop because "i" is unsigned.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

They have 4 rather than 8.

Fixes:
https://bugs.freedesktop.org/show_bug.cgi?id=63599Signed-off-by: wojciech kapuscinski <wojtask9@wp.pl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Wrong bit offset for SRC endian swapping.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Always use the regular UVD state for now.  This fixes
a performance regression with UVD playback on certain APUs.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Use the hw generated values rather than calculating
them in the driver.  There may be some older r6xx
asics where this doesn't work correctly.  This remains
to be seen.

See bug:
https://bugs.freedesktop.org/show_bug.cgi?id=69675Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

The drm code that calculates the 1001 clocks rounds up
rather than truncating.  This allows the table to match
properly on those modes.

See bug:
https://bugs.freedesktop.org/show_bug.cgi?id=69675Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Avoid losing precision.  See bug:
https://bugs.freedesktop.org/show_bug.cgi?id=69675

v2: fix math as per Anssi's comments.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Return -ENOMEM if the allocation fails.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>

This reverts commit 928c2f0c.

This patch double applied, two checks for the price of one.
Signed-off-by: Dave Airlie <airlied@redhat.com>

The crash reported and investigated in commit 5f4513 turned out to be
caused by a change to the read interface on newer (2012) SMCs.

Tests by Chris show that simply reading the data valid line is enough
for the problem to go away. Additional tests show that the newer SMCs
no longer wait for the number of requested bytes, but start sending
data right away.  Apparently the number of bytes to read is no longer
specified as before, but instead found out by reading until end of
data. Failure to read until end of data confuses the state machine,
which eventually causes the crash.

As a remedy, assuming bit0 is the read valid line, make sure there is
nothing more to read before leaving the read function.

Tested to resolve the original problem, and runtested on MBA3,1,
MBP4,1, MBP8,2, MBP10,1, MBP10,2. The patch seems to have no effect on
machines before 2012.
Tested-by: Chris Murphy <chris@cmurf.com>
Cc: stable@vger.kernel.org
Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

Disable MSIs for now until we can fix them up

* nouveau/drm-nouveau-next:
  drm/nouveau/mc: disable msi support by default, it's busted in tons of places

Commit 8b9ba7a3 'drm/gma500: use gem get/put page helpers' was missing a
line, which resulted in garbled screen.
Signed-off-by: Rob Clark <robdclark@gmail.com>
Tested-by: Guillaume CLÉMENT <gclement@baobob.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Pull perf fixes from Ingo Molnar:
 "Various fixlets:

  On the kernel side:

   - fix a race
   - fix a bug in the handling of the perf ring-buffer data page

  On the tooling side:

   - fix the handling of certain corrupted perf.data files
   - fix a bug in 'perf probe'
   - fix a bug in 'perf record + perf sched'
   - fix a bug in 'make install'
   - fix a bug in libaudit feature-detection on certain distros"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf session: Fix infinite loop on invalid perf.data file
  perf tools: Fix installation of libexec components
  perf probe: Fix to find line information for probe list
  perf tools: Fix libaudit test
  perf stat: Set child_pid after perf_evlist__prepare_workload()
  perf tools: Add default handler for mmap2 events
  perf/x86: Clean up cap_user_time* setting
  perf: Fix perf_pmu_migrate_context

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>

Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/urgent fixes from Arnaldo Carvalho de Melo:

 * The libaudit test was failing in some systems due to a unescaped newline, fix
   it so that the 'trace' tool can be built in such systems.

 * Fix installation of libexec components.

 * Add default handler for mmap2 events so that tools that don't explicitely
   define an MMAP2 handler don't crash, fix from David Ahern.

 * Fix to find line information for probe list, from Masami Hiramatsu.

 * Set child_pid after perf_evlist__prepare_workload(), fix from Namhyung Kim.

 * Fix infinite loop on invalid perf.data file, from Namhyung Kim.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>