- 11 Feb, 2021 2 commits
-
-
Dave Jiang authored
When the auxiliary device code is built into the kernel, it can be executed before the auxiliary bus is registered. This causes bus->p to be not allocated and triggers a NULL pointer dereference when the auxiliary bus device gets added with bus_add_device(). Call the auxiliary_bus_init() under driver_init() so the bus is initialized before devices. Below is the kernel splat for the bug: [ 1.948215] BUG: kernel NULL pointer dereference, address: 0000000000000060 [ 1.950670] #PF: supervisor read access in kernel mode [ 1.950670] #PF: error_code(0x0000) - not-present page [ 1.950670] PGD 0 [ 1.950670] Oops: 0000 1 SMP NOPTI [ 1.950670] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.10.0-intel-nextsvmtest+ #2205 [ 1.950670] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 1.950670] RIP: 0010:bus_add_device+0x64/0x140 [ 1.950670] Code: 00 49 8b 75 20 48 89 df e8 59 a1 ff ff 41 89 c4 85 c0 75 7b 48 8b 53 50 48 85 d2 75 03 48 8b 13 49 8b 85 a0 00 00 00 48 89 de <48> 8 78 60 48 83 c7 18 e8 ef d9 a9 ff 41 89 c4 85 c0 75 45 48 8b [ 1.950670] RSP: 0000:ff46032ac001baf8 EFLAGS: 00010246 [ 1.950670] RAX: 0000000000000000 RBX: ff4597f7414aa680 RCX: 0000000000000000 [ 1.950670] RDX: ff4597f74142bbc0 RSI: ff4597f7414aa680 RDI: ff4597f7414aa680 [ 1.950670] RBP: ff46032ac001bb10 R08: 0000000000000044 R09: 0000000000000228 [ 1.950670] R10: ff4597f741141b30 R11: ff4597f740182a90 R12: 0000000000000000 [ 1.950670] R13: ffffffffa5e936c0 R14: 0000000000000000 R15: 0000000000000000 [ 1.950670] FS: 0000000000000000(0000) GS:ff4597f7bba00000(0000) knlGS:0000000000000000 [ 1.950670] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1.950670] CR2: 0000000000000060 CR3: 000000002140c001 CR4: 0000000000f71ef0 [ 1.950670] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1.950670] DR3: 0000000000000000 DR6: 00000000fffe07f0 DR7: 0000000000000400 [ 1.950670] PKRU: 55555554 [ 1.950670] Call Trace: [ 1.950670] device_add+0x3ee/0x850 [ 1.950670] __auxiliary_device_add+0x47/0x60 [ 1.950670] idxd_pci_probe+0xf77/0x1180 [ 1.950670] local_pci_probe+0x4a/0x90 [ 1.950670] pci_device_probe+0xff/0x1b0 [ 1.950670] really_probe+0x1cf/0x440 [ 1.950670] ? rdinit_setup+0x31/0x31 [ 1.950670] driver_probe_device+0xe8/0x150 [ 1.950670] device_driver_attach+0x58/0x60 [ 1.950670] __driver_attach+0x8f/0x150 [ 1.950670] ? device_driver_attach+0x60/0x60 [ 1.950670] ? device_driver_attach+0x60/0x60 [ 1.950670] bus_for_each_dev+0x79/0xc0 [ 1.950670] ? kmem_cache_alloc_trace+0x323/0x430 [ 1.950670] driver_attach+0x1e/0x20 [ 1.950670] bus_add_driver+0x154/0x1f0 [ 1.950670] driver_register+0x70/0xc0 [ 1.950670] __pci_register_driver+0x54/0x60 [ 1.950670] idxd_init_module+0xe2/0xfc [ 1.950670] ? idma64_platform_driver_init+0x19/0x19 [ 1.950670] do_one_initcall+0x4a/0x1e0 [ 1.950670] kernel_init_freeable+0x1fc/0x25c [ 1.950670] ? rest_init+0xba/0xba [ 1.950670] kernel_init+0xe/0x116 [ 1.950670] ret_from_fork+0x1f/0x30 [ 1.950670] Modules linked in: [ 1.950670] CR2: 0000000000000060 [ 1.950670] --[ end trace cd7d1b226d3ca901 ]-- Fixes: 7de3697e ("Add auxiliary bus support") Reported-by:
Jacob Pan <jacob.jun.pan@intel.com> Reviewed-by:
Dan Williams <dan.j.williams@intel.com> Acked-by:
Dave Ertman <david.m.ertman@intel.com> Signed-off-by:
Dave Jiang <dave.jiang@intel.com> Link: https://lore.kernel.org/r/20210210201611.1611074-1-dave.jiang@intel.com Cc: stable <stable@vger.kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Saravana Kannan authored
When commit 1852ebd1 ("of: irq: make a stub for of_irq_parse_one()") added a stub for of_irq_parse_one() it set the return value to 0. Return value of 0 in this instance means the call succeeded and the out_irq pointer was filled with valid data. So, fix it to return an error value. Fixes: 1852ebd1 ("of: irq: make a stub for of_irq_parse_one()") Acked-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Saravana Kannan <saravanak@google.com> Link: https://lore.kernel.org/r/20210210200050.4106032-1-saravanak@google.comSigned-off-by:
-
- 10 Feb, 2021 1 commit
-
-
Stephen Rothwell authored
Signed-off-by:
-
- 09 Feb, 2021 12 commits
-
-
Saravana Kannan authored
This allows fw_devlink to recognize clock provider drivers that don't use the device-driver model to initialize the device. fw_devlink will use this information to make sure consumers of such clock providers aren't indefinitely blocked from probing, waiting for the power domain device to appear and bind to a driver. Tested-by:
Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by:
-
Saravana Kannan authored
This allows fw_devlink to recognize power domain drivers that don't use the device-driver model to initialize the device. fw_devlink will use this information to make sure consumers of such power domain aren't indefinitely blocked from probing, waiting for the power domain device to appear and bind to a driver. Tested-by:
-
Saravana Kannan authored
This allows fw_devlink to recognize irqdomain drivers that don't use the device-driver model to initialize the device. fw_devlink will use this information to make sure consumers of such irqdomain aren't indefinitely blocked from probing, waiting for the irqdomain device to appear and bind to a driver. Tested-by:
-
Saravana Kannan authored
Device links only work between devices that use the driver core to match and bind a driver to a device. So, add an API for frameworks to let the driver core know that a fwnode has been initialized by a driver without using the driver core. Then use this information to make sure that fw_devlink doesn't make the consumers wait indefinitely on suppliers that'll never bind to a driver. Tested-by:
-
Saravana Kannan authored
Not all DT bindings are mandatory bindings. Add support for optional DT bindings and mark iommus, iommu-map, dmas as optional DT bindings. Tested-by:
-
Saravana Kannan authored
This param allows forcing all dependencies to be treated as mandatory. This will be useful for boards in which all optional dependencies like IOMMUs and DMAs need to be treated as mandatory dependencies. Tested-by:
-
Saravana Kannan authored
If driver core marks a firmware node as not a device, don't add fwnode links where it's a supplier. Fixes: e5904747 ("driver core: Set fw_devlink=on by default") Tested-by:
-
Saravana Kannan authored
During the initial parsing of firmware by fw_devlink, fw_devlink might infer that some supplier firmware nodes would get populated as devices. But the inference is not always correct. This patch tries to logically detect and fix such mistakes as boot progresses or more devices probe. fw_devlink makes a fundamental assumption that once a device binds to a driver, it will populate (i.e: add as struct devices) all the child firmware nodes that could be populated as devices (if they aren't populated already). So, whenever a device probes, we check all its child firmware nodes. If a child firmware node has a corresponding device populated, we don't modify the child node or its descendants. However, if a child firmware node has not been populated as a device, we delete all the fwnode links where the child node or its descendants are suppliers. This ensures that no other device is blocked on a firmware node that will never be populated as a device. We also mark such fwnodes as NOT_DEVICE, so that no new fwnode links are created with these nodes as suppliers. Fixes: e5904747 ("driver core: Set fw_devlink=on by default") Tested-by:
Rafael J. Wysocki <rafael@kernel.org> Signed-off-by:
-
Uwe Kleine-König authored
The driver core ignores the return value of a bus' remove callback. However a driver returning an error code is a hint that there is a problem, probably a driver author who expects that returning e.g. -EBUSY has any effect. The right thing to do would be to make struct platform_driver::remove() return void. With the immense number of platform drivers this is however a big quest and I hope to prevent at least a few new drivers that return an error code here. Signed-off-by:
Uwe Kleine-König <uwe@kleine-koenig.org> Link: https://lore.kernel.org/r/20210207211537.19992-1-uwe@kleine-koenig.orgSigned-off-by:
-
Saravana Kannan authored
Commit 4104ca77 ("of: property: Add fw_devlink support for interrupts") was not taking interrupt-map into account. Fix that. Fixes: 4104ca77 ("of: property: Add fw_devlink support for interrupts") Reported-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Saravana Kannan authored
Dmitry reported[1] boot error messages caused by commit 4731210c ("gpiolib: Bind gpio_device to a driver to enable fw_devlink=on by default"). gpio-1022 (cpu-pwr-req-hog): hogged as input max77620-pinctrl max77620-pinctrl: pin gpio4 already requested by max77620-pinctrl; cannot claim for gpiochip1 max77620-pinctrl max77620-pinctrl: pin-4 (gpiochip1) status -22 max77620-pinctrl max77620-pinctrl: could not request pin 4 (gpio4) from group gpio4 on device max77620-pinctrl gpio_stub_drv gpiochip1: Error applying setting, reverse things back gpio_stub_drv: probe of gpiochip1 failed with error -22 This happens because when we try to probe a device, driver core calls into pinctrl to set up the pins. However, if the GPIO DT node already has a proper device created and probed, trying to probe the gpio_device with a stub driver makes the pins be claimed twice. pinctrl doesn't like this and throws an error. So, this patch makes sure the gpio_stub_drv doesn't match with a gpio_device if it's not the primary device for the fwnode. [1] - https://lore.kernel.org/lkml/544ad0e4-0954-274c-8e77-866aaa5661a8@gmail.com/ Fixes: 4731210c ("gpiolib: Bind gpio_device to a driver to enable fw_devlink=on by default") Tested-by:
Dmitry Osipenko <digetx@gmail.com> Tested-by:
Geert Uytterhoeven <geert+renesas@glider.be> Acked-by:
Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by:
-
Geert Uytterhoeven authored
Remove the bogus word "the" from "...once the it is..." in the documentation describing the "dev_groups" member of the device_driver structure. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Link: https://lore.kernel.org/r/20210205170608.1956223-1-geert@linux-m68k.orgSigned-off-by:
-
- 27 Jan, 2021 4 commits
-
-
Saravana Kannan authored
There are multiple instances of GPIO device tree nodes of the form: foo { compatible = "acme,foo"; ... gpio0: gpio0@xxxxxxxx { compatible = "acme,bar"; ... gpio-controller; }; gpio1: gpio1@xxxxxxxx { compatible = "acme,bar"; ... gpio-controller; }; ... } bazz { my-gpios = <&gpio0 ...>; } Case 1: The driver for "foo" populates struct device for these gpio* nodes and then probes them using a driver that binds with "acme,bar". This driver for "acme,bar" then registers the gpio* nodes with gpiolib. This lines up with how DT nodes with the "compatible" property are typically converted to struct devices and then registered with driver core to probe them. This also allows the gpio* devices to hook into all the driver core capabilities like runtime PM, probe deferral, suspend/resume ordering, device links, etc. Case 2: The driver for "foo" doesn't populate struct devices for these gpio* nodes before registering them with gpiolib. Instead it just loops through its child nodes and directly registers the gpio* nodes with gpiolib. Drivers that follow case 2 cause problems with fw_devlink=on. This is because fw_devlink will prevent bazz from probing until there's a struct device that has gpio0 as its fwnode (because bazz lists gpio0 as a GPIO supplier). Once the struct device is available, fw_devlink will create a device link with gpio0 device as the supplier and bazz device as the consumer. After this point, since the gpio0 device will never bind to a driver, the device link will prevent bazz device from ever probing. Finding and refactoring all the instances of drivers that follow case 2 will cause a lot of code churn and it is not something that can be done in one shot. In some instances it might not even be possible to refactor them cleanly. Examples of such instances are [1] [2]. This patch works around this problem and avoids all the code churn by simply setting the fwnode of the gpio_device and creating a stub driver to bind to the gpio_device. This allows all the consumers to continue probing when the driver follows case 2. [1] - https://lore.kernel.org/lkml/20201014191235.7f71fcb4@xhacker.debian/ [2] - https://lore.kernel.org/lkml/e28e1f38d87c12a3c714a6573beba6e1@kernel.org/ Fixes: e5904747 ("driver core: Set fw_devlink=on by default") Cc: Marc Zyngier <maz@kernel.org> Cc: Jisheng Zhang <Jisheng.Zhang@synaptics.com> Cc: Kever Yang <kever.yang@rock-chips.com> Reviewed-by:Linus Walleij <linus.walleij@linaro.org> Acked-by:
-
Arnd Bergmann authored
The structleak plugin causes the stack frame size to grow immensely: drivers/base/test/property-entry-test.c: In function 'pe_test_reference': drivers/base/test/property-entry-test.c:481:1: error: the frame size of 2640 bytes is larger than 2048 bytes [-Werror=frame-larger-than=] 481 | } | ^ drivers/base/test/property-entry-test.c: In function 'pe_test_uints': drivers/base/test/property-entry-test.c:99:1: error: the frame size of 2592 bytes is larger than 2048 bytes [-Werror=frame-larger-than=] Turn it off in this file. Signed-off-by:Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210125124533.101339-3-arnd@kernel.orgSigned-off-by:
-
Bhaskar Chowdhury authored
s/resposible/responsible/ Acked-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Bhaskar Chowdhury <unixbhaskar@gmail.com> Link: https://lore.kernel.org/r/20210120143312.3229181-1-unixbhaskar@gmail.comSigned-off-by:
-
Joe Pater authored
driver_create_groups doesn't seem to have ever existed. Change its mention in a printk to 'driver_add_groups'. Signed-off-by:
Joe Pater <02joepater06@gmail.com> Link: https://lore.kernel.org/r/20210110145442.15301-1-02joepater06@gmail.comSigned-off-by:
-
- 26 Jan, 2021 2 commits
-
-
Saravana Kannan authored
This allows fw_devlink to create device links between consumers of an interrupt and the supplier of the interrupt. Cc: Marc Zyngier <maz@kernel.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by:
Thierry Reding <treding@nvidia.com> Reviewed-by:
-
Saravana Kannan authored
To provide backward compatibility for boards that use deprecated DT bindings, we need to add fw_devlink support for "gpio" and "gpios". We also need to ignore these properties on nodes with "gpio-hog" property because their gpio[s] are all supplied by the parent node. Fixes: e5904747 ("driver core: Set fw_devlink=on by default") Cc: linux-tegra <linux-tegra@vger.kernel.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by:
Jon Hunter <jonathanh@nvidia.com> Reviewed-by:
-
- 25 Jan, 2021 2 commits
-
-
Greg Kroah-Hartman authored
We need the fixes in here as well. Signed-off-by: -
Linus Torvalds authored
-
- 24 Jan, 2021 17 commits
-
-
git://git.libc.org/linux-shLinus Torvalds authored
Pull arch/sh updates from Rich Felker: "Cleanup and warning fixes" * tag 'sh-for-5.11' of git://git.libc.org/linux-sh: sh/intc: Restore devm_ioremap() alignment sh: mach-sh03: remove duplicate include arch: sh: remove duplicate include sh: Drop ARCH_NR_GPIOS definition sh: Remove unused HAVE_COPY_THREAD_TLS macro sh: remove CONFIG_IDE from most defconfig sh: mm: Convert to DEFINE_SHOW_ATTRIBUTE sh: intc: Convert to DEFINE_SHOW_ATTRIBUTE arch/sh: hyphenate Non-Uniform in Kconfig prompt sh: dma: fix kconfig dependency for G2_DMA
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: "Still need a final cancelation fix that isn't quite done done, expected in the next day or two. That said, this contains: - Wakeup fix for IOPOLL requests - SQPOLL split close op handling fix - Ensure that any use of io_uring fd itself is marked as inflight - Short non-regular file read fix (Pavel) - Fix up bad false positive warning (Pavel) - SQPOLL fixes (Pavel) - In-flight removal fix (Pavel)" * tag 'io_uring-5.11-2021-01-24' of git://git.kernel.dk/linux-block: io_uring: account io_uring internal files as REQ_F_INFLIGHT io_uring: fix sleeping under spin in __io_clean_op io_uring: fix short read retries for non-reg files io_uring: fix SQPOLL IORING_OP_CLOSE cancelation state io_uring: fix skipping disabling sqo on exec io_uring: fix uring_flush in exit_files() warning io_uring: fix false positive sqo warning on flush io_uring: iopoll requests should also wake task ->in_idle state
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: - NVMe pull request from Christoph: - fix a status code in nvmet (Chaitanya Kulkarni) - avoid double completions in nvme-rdma/nvme-tcp (Chao Leng) - fix the CMB support to cope with NVMe 1.4 controllers (Klaus Jensen) - fix PRINFO handling in the passthrough ioctl (Revanth Rajashekar) - fix a double DMA unmap in nvme-pci - lightnvm error path leak fix (Pan) - MD pull request from Song: - Flush request fix (Xiao) * tag 'block-5.11-2021-01-24' of git://git.kernel.dk/linux-block: lightnvm: fix memory leak when submit fails nvme-pci: fix error unwind in nvme_map_data nvme-pci: refactor nvme_unmap_data md: Set prev_flush_start and flush_bio in an atomic way nvmet: set right status on error in id-ns handler nvme-pci: allow use of cmb on v1.4 controllers nvme-tcp: avoid request double completion for concurrent nvme_tcp_timeout nvme-rdma: avoid request double completion for concurrent nvme_rdma_timeout nvme: check the PRINFO bit before deciding the host buffer length -
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "18 patches. Subsystems affected by this patch series: mm (pagealloc, memcg, kasan, memory-failure, and highmem), ubsan, proc, and MAINTAINERS" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: MAINTAINERS: add a couple more files to the Clang/LLVM section proc_sysctl: fix oops caused by incorrect command parameters powerpc/mm/highmem: use __set_pte_at() for kmap_local() mips/mm/highmem: use set_pte() for kmap_local() mm/highmem: prepare for overriding set_pte_at() sparc/mm/highmem: flush cache and TLB mm: fix page reference leak in soft_offline_page() ubsan: disable unsigned-overflow check for i386 kasan, mm: fix resetting page_alloc tags for HW_TAGS kasan, mm: fix conflicts with init_on_alloc/free kasan: fix HW_TAGS boot parameters kasan: fix incorrect arguments passing in kasan_add_zero_shadow kasan: fix unaligned address is unhandled in kasan_remove_zero_shadow mm: fix numa stats for thp migration mm: memcg: fix memcg file_dirty numa stat mm: memcg/slab: optimize objcg stock draining mm: fix initialization of struct page for holes in memory layout x86/setup: don't remove E820_TYPE_RAM for pfn 0
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-miscLinus Torvalds authored
Pull char/misc driver fixes from Greg KH: "Here are some small char/misc driver fixes for 5.11-rc5: - habanalabs driver fixes - phy driver fixes - hwtracing driver fixes - rtsx cardreader driver fix All of these have been in linux-next with no reported issues" * tag 'char-misc-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: misc: rtsx: init value of aspm_enabled habanalabs: disable FW events on device removal habanalabs: fix backward compatibility of idle check habanalabs: zero pci counters packet before submit to FW intel_th: pci: Add Alder Lake-P support stm class: Fix module init return on allocation failure habanalabs: prevent soft lockup during unmap habanalabs: fix reset process in case of failures habanalabs: fix dma_addr passed to dma_mmap_coherent phy: mediatek: allow compile-testing the dsi phy phy: cpcap-usb: Fix warning for missing regulator_disable PHY: Ingenic: fix unconditional build of phy-ingenic-usb
-
Linus Torvalds authored
Merge tag 'driver-core-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here are some small driver core fixes for 5.11-rc5 that resolve some reported problems: - revert of a -rc1 patch that was causing problems with some machines - device link device name collision problem fix (busses only have to name devices unique to their bus, not unique to all busses) - kernfs splice bugfixes to resolve firmware loading problems for Qualcomm systems. - other tiny driver core fixes for minor issues reported. All of these have been in linux-next with no reported problems" * tag 'driver-core-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: driver core: Fix device link device name collision driver core: Extend device_is_dependent() kernfs: wire up ->splice_read and ->splice_write kernfs: implement ->write_iter kernfs: implement ->read_iter Revert "driver core: Reorder devices on successful probe" Driver core: platform: Add extra error check in devm_platform_get_irqs_affinity() drivers core: Free dma_range_map when driver probe failed
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/stagingLinus Torvalds authored
Pull staging/IIO driver fixes from Greg KH: "Here are some IIO driver fixes for 5.11-rc5 to resolve some reported problems. Nothing major, just a few small fixes, all of these have been in linux-next for a while and full details are in the shortlog" * tag 'staging-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio: sx9310: Fix semtech,avg-pos-strength setting when > 16 iio: common: st_sensors: fix possible infinite loop in st_sensors_irq_thread iio: ad5504: Fix setting power-down state counter:ti-eqep: remove floor drivers: iio: temperature: Add delay after the addressed reset command in mlx90632.c iio: adc: ti_am335x_adc: remove omitted iio_kfifo_free() dt-bindings: iio: accel: bma255: Fix bmc150/bmi055 compatible iio: sx9310: Off by one in sx9310_read_thresh()
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/ttyLinus Torvalds authored
Pull tty/serial fixes from Greg KH: "Here are three small tty/serial fixes for 5.11-rc5 to resolve reported problems: - two patches to fix up writing to ttys with splice - mvebu-uart driver fix for reported problem All of these have been in linux-next with no reported problems" * tag 'tty-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: fix up hung_up_tty_write() conversion tty: implement write_iter serial: mvebu-uart: fix tx lost characters at power off
-
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usbLinus Torvalds authored
Pull USB fixes from Greg KH: "Here are some small USB driver fixes for 5.11-rc5. They resolve: - xhci issues for some reported problems - ehci driver issue for one specific device - USB gadget fixes for some reported problems - cdns3 driver fixes for issues reported - MAINTAINERS file update - thunderbolt minor fix All of these have been in linux-next with no reported issues" * tag 'usb-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: bdc: Make bdc pci driver depend on BROKEN xhci: tegra: Delay for disabling LFPS detector xhci: make sure TRB is fully written before giving it to the controller usb: udc: core: Use lock when write to soft_connect USB: gadget: dummy-hcd: Fix errors in port-reset handling usb: gadget: aspeed: fix stop dma register setting. USB: ehci: fix an interrupt calltrace error ehci: fix EHCI host controller initialization sequence MAINTAINERS: update Peter Chen's email address thunderbolt: Drop duplicated 0x prefix from format string MAINTAINERS: Update address for Cadence USB3 driver usb: cdns3: imx: improve driver .remove API usb: cdns3: imx: fix can't create core device the second time issue usb: cdns3: imx: fix writing read-only memory issue
-
Nathan Chancellor authored
The K: entry should ensure that Nick and I always get CC'd on patches that touch these files but it is better to be explicit rather than implicit. Link: https://lkml.kernel.org/r/20210114004059.2129921-1-natechancellor@gmail.comSigned-off-by:
Nathan Chancellor <natechancellor@gmail.com> Reviewed-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Xiaoming Ni authored
The process_sysctl_arg() does not check whether val is empty before invoking strlen(val). If the command line parameter () is incorrectly configured and val is empty, oops is triggered. For example: "hung_task_panic=1" is incorrectly written as "hung_task_panic", oops is triggered. The call stack is as follows: Kernel command line: .... hung_task_panic ...... Call trace: __pi_strlen+0x10/0x98 parse_args+0x278/0x344 do_sysctl_args+0x8c/0xfc kernel_init+0x5c/0xf4 ret_from_fork+0x10/0x30 To fix it, check whether "val" is empty when "phram" is a sysctl field. Error codes are returned in the failure branch, and error logs are generated by parse_args(). Link: https://lkml.kernel.org/r/20210118133029.28580-1-nixiaoming@huawei.com Fixes: 3db978d4 ("kernel/sysctl: support setting sysctl parameters from kernel command line") Signed-off-by:Xiaoming Ni <nixiaoming@huawei.com> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: Kees Cook <keescook@chromium.org> Cc: Iurii Zaikin <yzaikin@google.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Heiner Kallweit <hkallweit1@gmail.com> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: <stable@vger.kernel.org> [5.8+] Signed-off-by:
-
Thomas Gleixner authored
The original PowerPC highmem mapping function used __set_pte_at() to denote that the mapping is per CPU. This got lost with the conversion to the generic implementation. Override the default map function. Link: https://lkml.kernel.org/r/20210112170411.281464308@linutronix.de Fixes: 47da42b2 ("powerpc/mm/highmem: Switch to generic kmap atomic") Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Andreas Larsson <andreas@gaisler.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
-
Thomas Gleixner authored
set_pte_at() on MIPS invokes update_cache() which might recurse into kmap_local(). Use set_pte() like the original MIPS highmem implementation did. Link: https://lkml.kernel.org/r/20210112170411.187513575@linutronix.de Fixes: a4c33e83 ("mips/mm/highmem: Switch to generic kmap atomic") Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Reported-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by:
-
Thomas Gleixner authored
The generic kmap_local() map function uses set_pte_at(), but MIPS requires set_pte() and PowerPC wants __set_pte_at(). Provide arch_kmap_local_set_pte() and default it to set_pte_at(). Link: https://lkml.kernel.org/r/20210112170411.056306194@linutronix.deSigned-off-by:
-
Thomas Gleixner authored
Patch series "mm/highmem: Fix fallout from generic kmap_local conversions". The kmap_local conversion wreckaged sparc, mips and powerpc as it missed some of the details in the original implementation. This patch (of 4): The recent conversion to the generic kmap_local infrastructure failed to assign the proper pre/post map/unmap flush operations for sparc. Sparc requires cache flush before map/unmap and tlb flush afterwards. Link: https://lkml.kernel.org/r/20210112170136.078559026@linutronix.de Link: https://lkml.kernel.org/r/20210112170410.905976187@linutronix.de Fixes: 3293efa9 ("sparc/mm/highmem: Switch to generic kmap atomic") Signed-off-by:
Andreas Larsson <andreas@gaisler.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Paul Cercueil <paul@crapouillou.net> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Dan Williams authored
The conversion to move pfn_to_online_page() internal to soft_offline_page() missed that the get_user_pages() reference taken by the madvise() path needs to be dropped when pfn_to_online_page() fails. Note the direct sysfs-path to soft_offline_page() does not perform a get_user_pages() lookup. When soft_offline_page() is handed a pfn_valid() && !pfn_to_online_page() pfn the kernel hangs at dax-device shutdown due to a leaked reference. Link: https://lkml.kernel.org/r/161058501210.1840162.8108917599181157327.stgit@dwillia2-desk3.amr.corp.intel.com Fixes: feec24a6 ("mm, soft-offline: convert parameter to pfn") Signed-off-by:
David Hildenbrand <david@redhat.com> Reviewed-by:
Oscar Salvador <osalvador@suse.de> Reviewed-by:
Naoya Horiguchi <naoya.horiguchi@nec.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Qian Cai <cai@lca.pw> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Arnd Bergmann authored
Building ubsan kernels even for compile-testing introduced these warnings in my randconfig environment: crypto/blake2b_generic.c:98:13: error: stack frame size of 9636 bytes in function 'blake2b_compress' [-Werror,-Wframe-larger-than=] static void blake2b_compress(struct blake2b_state *S, crypto/sha512_generic.c:151:13: error: stack frame size of 1292 bytes in function 'sha512_generic_block_fn' [-Werror,-Wframe-larger-than=] static void sha512_generic_block_fn(struct sha512_state *sst, u8 const *src, lib/crypto/curve25519-fiat32.c:312:22: error: stack frame size of 2180 bytes in function 'fe_mul_impl' [-Werror,-Wframe-larger-than=] static noinline void fe_mul_impl(u32 out[10], const u32 in1[10], const u32 in2[10]) lib/crypto/curve25519-fiat32.c:444:22: error: stack frame size of 1588 bytes in function 'fe_sqr_impl' [-Werror,-Wframe-larger-than=] static noinline void fe_sqr_impl(u32 out[10], const u32 in1[10]) Further testing showed that this is caused by -fsanitize=unsigned-integer-overflow, but is isolated to the 32-bit x86 architecture. The one in blake2b immediately overflows the 8KB stack area architectures, so better ensure this never happens by disabling the option for 32-bit x86. Link: https://lkml.kernel.org/r/20210112202922.2454435-1-arnd@kernel.org Link: https://lore.kernel.org/lkml/20201230154749.746641-1-arnd@kernel.org/ Fixes: d0a3ac54 ("ubsan: enable for all*config builds") Signed-off-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
-
