The reset work holds a mutex to prevent races with removal modifying the
same resources, but was unlocking only on success. Unlock on failure
too.

Fixes: 5c959d73 ("nvme-pci: fix rapid add remove sequence")
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

When requeue, if RQF_DONTPREP, rq has contained some driver
specific data, so insert it to hctx dispatch list to avoid any
merge. Take scsi as example, here is the trace event log (no
io scheduler, because RQF_STARTED would prevent merging),

   kworker/0:1H-339   [000] ...1  2037.209289: block_rq_insert: 8,0 R 4096 () 32768 + 8 [kworker/0:1H]
scsi_inert_test-1987  [000] ....  2037.220465: block_bio_queue: 8,0 R 32776 + 8 [scsi_inert_test]
scsi_inert_test-1987  [000] ...2  2037.220466: block_bio_backmerge: 8,0 R 32776 + 8 [scsi_inert_test]
   kworker/0:1H-339   [000] ....  2047.220913: block_rq_issue: 8,0 R 8192 () 32768 + 16 [kworker/0:1H]
scsi_inert_test-1996  [000] ..s1  2047.221007: block_rq_complete: 8,0 R () 32768 + 8 [0]
scsi_inert_test-1996  [000] .Ns1  2047.221045: block_rq_requeue: 8,0 R () 32776 + 8 [0]
   kworker/0:1H-339   [000] ...1  2047.221054: block_rq_insert: 8,0 R 4096 () 32776 + 8 [kworker/0:1H]
   kworker/0:1H-339   [000] ...1  2047.221056: block_rq_issue: 8,0 R 4096 () 32776 + 8 [kworker/0:1H]
scsi_inert_test-1986  [000] ..s1  2047.221119: block_rq_complete: 8,0 R () 32776 + 8 [0]

(32768 + 8) was requeued by scsi_queue_insert and had RQF_DONTPREP.
Then it was merged with (32776 + 8) and issued. Due to RQF_DONTPREP,
the sdb only contained the part of (32768 + 8), then only that part
was completed. The lucky thing was that scsi_io_completion detected
it and requeued the remaining part. So we didn't get corrupted data.
However, the requeue of (32776 + 8) is not expected.
Suggested-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

As the prototype has been defined in "include/linux/blk-mq.h", the one
in "block/blk-mq.h" can be removed then.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This is to catch any unexpected negative value of inflight IO counter.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Our test reported the following stack, and vmcore showed that
->inflight counter is -1.

[ffffc9003fcc38d0] __schedule at ffffffff8173d95d
[ffffc9003fcc3958] schedule at ffffffff8173de26
[ffffc9003fcc3970] io_schedule at ffffffff810bb6b6
[ffffc9003fcc3988] blkcg_iolatency_throttle at ffffffff813911cb
[ffffc9003fcc3a20] rq_qos_throttle at ffffffff813847f3
[ffffc9003fcc3a48] blk_mq_make_request at ffffffff8137468a
[ffffc9003fcc3b08] generic_make_request at ffffffff81368b49
[ffffc9003fcc3b68] submit_bio at ffffffff81368d7d
[ffffc9003fcc3bb8] ext4_io_submit at ffffffffa031be00 [ext4]
[ffffc9003fcc3c00] ext4_writepages at ffffffffa03163de [ext4]
[ffffc9003fcc3d68] do_writepages at ffffffff811c49ae
[ffffc9003fcc3d78] __filemap_fdatawrite_range at ffffffff811b6188
[ffffc9003fcc3e30] filemap_write_and_wait_range at ffffffff811b6301
[ffffc9003fcc3e60] ext4_sync_file at ffffffffa030cee8 [ext4]
[ffffc9003fcc3ea8] vfs_fsync_range at ffffffff8128594b
[ffffc9003fcc3ee8] do_fsync at ffffffff81285abd
[ffffc9003fcc3f18] sys_fsync at ffffffff81285d50
[ffffc9003fcc3f28] do_syscall_64 at ffffffff81003c04
[ffffc9003fcc3f50] entry_SYSCALL_64_after_swapgs at ffffffff81742b8e

The ->inflight counter may be negative (-1) if

1) blk-iolatency was disabled when the IO was issued,

2) blk-iolatency was enabled before this IO reached its endio,

3) the ->inflight counter is decreased from 0 to -1 in endio()

In fact the hang can be easily reproduced by the below script,

H=/sys/fs/cgroup/unified/
P=/sys/fs/cgroup/unified/test

echo "+io" > $H/cgroup.subtree_control
mkdir -p $P

echo $$ > $P/cgroup.procs

xfs_io -f -d -c "pwrite 0 4k" /dev/sdg

echo "`cat /sys/block/sdg/dev` target=1000000" > $P/io.latency

xfs_io -f -d -c "pwrite 0 4k" /dev/sdg

This fixes the problem by freezing the queue so that while
enabling/disabling iolatency, there is no inflight rq running.

Note that quiesce_queue is not needed as this only updating iolatency
configuration about which dispatching request_queue doesn't care.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Currently, blktrace will not show requests that don't have any data as
rq->__sector is initialized to -1 which is out of device range and thus
discarded by act_log_check(). This is most notably the case for cache
flush requests sent to the device. Fix the problem by making
blk_rq_trace_sector() return 0 for requests without initialized sector.
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

When something let __find_get_block_slow() hit all_mapped path, it calls
printk() for 100+ times per a second. But there is no need to print same
message with such high frequency; it is just asking for stall warning, or
at least bloating log files.

  [  399.866302][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8
  [  399.873324][T15342] b_state=0x00000029, b_size=512
  [  399.878403][T15342] device loop0 blocksize: 4096
  [  399.883296][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8
  [  399.890400][T15342] b_state=0x00000029, b_size=512
  [  399.895595][T15342] device loop0 blocksize: 4096
  [  399.900556][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8
  [  399.907471][T15342] b_state=0x00000029, b_size=512
  [  399.912506][T15342] device loop0 blocksize: 4096

This patch reduces frequency to up to once per a second, in addition to
concatenating three lines into one.

  [  399.866302][T15342] __find_get_block_slow() failed. block=1, b_blocknr=8, b_state=0x00000029, b_size=512, device loop0 blocksize: 4096
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

When calling register_blkdev() with specified major
device number, the return code is 0 on success.
So it seems not correct direct assign return code to
variable major_num in this case.
Tested-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Chengguang Xu <cgxu519@gmx.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We've received a bugreport that using LPM with a SAMSUNG
MZ7TE512HMHP-000L1 SSD leads to system instability, we already have
a quirk for the MZ7TD256HAFV-000L9, which is also a Samsun EVO 840 /
PM851 OEM model, so it seems some of these models have a LPM issue.

This commits adds a NOLPM quirk for the model string from the new
bugeport, to avoid the reported stability issues.

Cc: stable@vger.kernel.org
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1571330Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull NVMe fixes from Christoph for this release.

* 'nvme-5.0' of git://git.infradead.org/nvme:
  nvme-pci: fix rapid add remove sequence
  nvme: lock NS list changes while handling command effects

A surprise removal may fail to tear down request queues if it is racing
with the initial asynchronous probe. If that happens, the remove path
won't see the queue resources to tear down, and the controller reset
path may create a new request queue on a removed device, but will not
be able to make forward progress, deadlocking the pci removal.

Protect setting up non-blocking resources from a shutdown by holding the
same mutex, and transition to the CONNECTING state after these resources
are initialized so the probe path may see the dead controller state
before dispatching new IO.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=202081Reported-by: Alex Gagniuc <Alex_Gagniuc@Dellteam.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Tested-by: Alex Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

If a controller supports the NS Change Notification, the namespace
scan_work is automatically triggered after attaching a new namespace.

Occasionally the namespace scan_work may append the new namespace to the
list before the admin command effects handling is completed. The effects
handling unfreezes namespaces, but if it unfreezes the newly attached
namespace, its request_queue freeze depth will be off and we'll hit the
warning in blk_mq_unfreeze_queue().

On the next namespace add, we will fail to freeze that queue due to the
previous bad accounting and deadlock waiting for frozen.

Fix that by preventing scan work from altering the namespace list while
command effects handling needs to pair freeze with unfreeze.
Reported-by: Wen Xiong <wenxiong@us.ibm.com>
Tested-by: Wen Xiong <wenxiong@us.ibm.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

A recent optimization had left private uninitialized.

Fixes: 2bc4ca9b ("aio: don't zero entire aio_kiocb aio_get_req()")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Mike Marshall <hubcap@omnibond.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

There's an issue with how sense requests are handled in IDE. If ide-cd
encounters an error, it queues a sense request. With how IDE request
handling is done, this is the next request we need to handle. But it's
impossible to guarantee this, as another request could come in between
the sense being queued, and ->queue_rq() being run and handling it. If
that request ALSO fails, then we attempt to doubly queue the single
sense request we have.

Since we only support one active request at the time, defer request
processing when a sense request is queued.

Fixes: 60033520 "ide: convert to blk-mq"
Reported-by: He Zhe <zhe.he@windriver.com>
Tested-by: He Zhe <zhe.he@windriver.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Florian reported a io hung issue when fsync(). It should be
triggered by following race condition.

data + post flush         a flush

blk_flush_complete_seq
  case REQ_FSEQ_DATA
    blk_flush_queue_rq
    issued to driver      blk_mq_dispatch_rq_list
                            try to issue a flush req
                            failed due to NON-NCQ command
                            .queue_rq return BLK_STS_DEV_RESOURCE

request completion
  req->end_io // doesn't check RESTART
  mq_flush_data_end_io
    case REQ_FSEQ_POSTFLUSH
      blk_kick_flush
        do nothing because previous flush
        has not been completed
     blk_mq_run_hw_queue
                              insert rq to hctx->dispatch
                              due to RESTART is still set, do nothing

To fix this, replace the blk_mq_run_hw_queue in mq_flush_data_end_io
with blk_mq_sched_restart to check and clear the RESTART flag.

Fixes: bd166ef1 (blk-mq-sched: add framework for MQ capable IO schedulers)
Reported-by: Florian Stecker <m19@florianstecker.de>
Tested-by: Florian Stecker <m19@florianstecker.de>
Signed-off-by: Jianchao Wang <jianchao.w.wang@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

syzbot is hitting flush_work() warning caused by commit 4d43d395
("workqueue: Try to catch flush_work() without INIT_WORK().") [1].
Although that commit did not expect INIT_WORK(NULL) case, calling
flush_work() without setting a valid callback should be avoided anyway.
Fix this problem by setting a no-op callback instead of NULL.

[1] https://syzkaller.appspot.com/bug?id=e390366bc48bc82a7c668326e0663be3b91cbd29Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-and-tested-by: syzbot <syzbot+ba2a929dcf8e704c180e@syzkaller.appspotmail.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull MD fix from Song.

* 'md-fixes' of https://github.com/liu-song-6/linux:
  md/raid5: fix 'out of memory' during raid cache recovery

This fixes the case when md array assembly fails because of raid cache recovery
unable to allocate a stripe, despite attempts to replay stripes and increase
cache size. This happens because stripes released by r5c_recovery_replay_stripes
and raid5_set_cache_size don't become available for allocation immediately.
Released stripes first are placed on conf->released_stripes list and require
md thread to merge them on conf->inactive_list before they can be allocated.

Patch allows final allocation attempt during cache recovery to wait for
new stripes to become availabe for allocation.

Cc: linux-raid@vger.kernel.org
Cc: Shaohua Li <shli@kernel.org>
Cc: linux-stable <stable@vger.kernel.org> # 4.10+
Fixes: b4c625c6 ("md/r5cache: r5cache recovery: part 1")
Signed-off-by: Alexei Naberezhnov <anaberezhnov@fb.com>
Signed-off-by: Song Liu <songliubraving@fb.com>

This reverts commit 2830bf6f.

The underlying assumption that one sparse section belongs into a single
numa node doesn't hold really. Robert Shteynfeld has reported a boot
failure. The boot log was not captured but his memory layout is as
follows:

  Early memory node ranges
    node   1: [mem 0x0000000000001000-0x0000000000090fff]
    node   1: [mem 0x0000000000100000-0x00000000dbdf8fff]
    node   1: [mem 0x0000000100000000-0x0000001423ffffff]
    node   0: [mem 0x0000001424000000-0x0000002023ffffff]

This means that node0 starts in the middle of a memory section which is
also in node1.  memmap_init_zone tries to initialize padding of a
section even when it is outside of the given pfn range because there are
code paths (e.g.  memory hotplug) which assume that the full worth of
memory section is always initialized.

In this particular case, though, such a range is already intialized and
most likely already managed by the page allocator.  Scribbling over
those pages corrupts the internal state and likely blows up when any of
those pages gets used.
Reported-by: Robert Shteynfeld <robert.shteynfeld@gmail.com>
Fixes: 2830bf6f ("mm, memory_hotplug: initialize struct pages for the full memory section")
Cc: stable@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull x86 fixes from Thomas Gleixner:
 "A set of fixes for x86:

   - Fix the swapped outb() parameters in the KASLR code

   - Fix the PKEY handling at fork which missed to preserve the pkey
     state for the child. Comes with a test case to validate that.

   - Fix the entry stack handling for XEN PV to respect that XEN PV
     systems enter the function already on the current thread stack and
     not on the trampoline.

   - Fix kexec load failure caused by using a stale value when the
     kexec_buf structure is reused for subsequent allocations.

   - Fix a bogus sizeof() in the memory encryption code

   - Enforce PCI dependency for the Intel Low Power Subsystem

   - Enforce PCI_LOCKLESS_CONFIG when PCI is enabled"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/Kconfig: Select PCI_LOCKLESS_CONFIG if PCI is enabled
  x86/entry/64/compat: Fix stack switching for XEN PV
  x86/kexec: Fix a kexec_file_load() failure
  x86/mm/mem_encrypt: Fix erroneous sizeof()
  x86/selftests/pkeys: Fork() to check for state being preserved
  x86/pkeys: Properly copy pkey state at fork()
  x86/kaslr: Fix incorrect i8254 outb() parameters
  x86/intel/lpss: Make PCI dependency explicit

Pull x86 timer fixes from Thomas Gleixner:
 "Two commits which were missed to be sent during the merge window.

   - The TSC calibration fix turns out to be more urgent as recent
     Skylake-X systems seem to have massive trouble with calibration
     disturbance. This should go back into stable for that reason and it
     the risk of breakage is rather low.

   - Drop an unused define"

* 'x86-timers-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/hpet: Remove unused FSEC_PER_NSEC define
  x86/tsc: Make calibration refinement more robust

Pull timer fix from Thomas Glexiner:
 "A single regression fix to address the unintended breakage of posix
  cpu timers.

  This is caused by a new sanity check in the common code, which fails
  for posix cpu timers under certain conditions because the posix cpu
  timer code never updates the variable which is checked"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  posix-cpu-timers: Unbreak timer rearming

Pull locking fixes from Thomas Gleixner:
 "A small series of fixes which all address possible missed wakeups:

   - Document and fix the wakeup ordering of wake_q

   - Add the missing barrier in rcuwait_wake_up(), which was documented
     in the comment but missing in the code

   - Fix the possible missed wakeups in the rwsem and futex code"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  locking/rwsem: Fix (possible) missed wakeup
  futex: Fix (possible) missed wakeup
  sched/wake_q: Fix wakeup ordering for wake_q
  sched/wake_q: Document wake_q_add()
  sched/wait: Fix rcuwait_wake_up() ordering

Pull irq fixes from Thomas Gleixner:
 "A small set of fixes for the interrupt subsystem:

   - Fix a double increment in the irq descriptor allocator which
     resulted in a sanity check only being done for every second
     affinity mask

   - Add a missing device tree translation in the stm32-exti driver.
     Without that the interrupt association is completely wrong.

   - Initialize the mutex in the GIC-V3 MBI driver

   - Fix the alignment for aliasing devices in the GIC-V3-ITS driver so
     multi MSI allocations work correctly

   - Ensure that the initial affinity of a interrupt is not empty at
     startup time.

   - Drop bogus include in the madera irq chip driver

   - Fix KernelDoc regression"

* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic-v3-its: Align PCI Multi-MSI allocation on their size
  genirq/irqdesc: Fix double increment in alloc_descs()
  genirq: Fix the kerneldoc comment for struct irq_affinity_desc
  irqchip/madera: Drop GPIO includes
  irqchip/gic-v3-mbi: Fix uninitialized mbi_lock
  irqchip/stm32-exti: Add domain translate function
  genirq: Make sure the initial affinity is not empty

Pull EDAC fix from Borislav Petkov:
 "Fix persistent register offsets of altera_edac, from Thor Thayer"

* tag 'edac_fix_for_5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
  EDAC, altera: Fix S10 persistent register offset

Pull block revert from Jens Axboe:
 "Silly error snuck into a patch from the last series, let's do a revert
  to avoid a potential use-after-free"

* tag 'for-linus-20190127' of git://git.kernel.dk/linux-block:
  Revert "block: cover another queue enter recursion via BIO_QUEUE_ENTERED"

Pull KVM fixes from Paolo Bonzini:
 "Quite a few fixes for x86: nested virtualization save/restore, AMD
  nested virtualization and virtual APIC, 32-bit fixes, an important fix
  to restore operation on older processors, and a bunch of hyper-v
  bugfixes. Several are marked stable.

  There are also fixes for GCC warnings and for a GCC/objtool interaction"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: Mark expected switch fall-throughs
  KVM: x86: fix TRACE_INCLUDE_PATH and remove -I. header search paths
  KVM: selftests: check returned evmcs version range
  x86/kvm/hyper-v: nested_enable_evmcs() sets vmcs_version incorrectly
  KVM: VMX: Move vmx_vcpu_run()'s VM-Enter asm blob to a helper function
  kvm: selftests: Fix region overlap check in kvm_util
  kvm: vmx: fix some -Wmissing-prototypes warnings
  KVM: nSVM: clear events pending from svm_complete_interrupts() when exiting to L1
  svm: Fix AVIC incomplete IPI emulation
  svm: Add warning message for AVIC IPI invalid target
  KVM: x86: WARN_ONCE if sending a PV IPI returns a fatal error
  KVM: x86: Fix PV IPIs for 32-bit KVM host
  x86/kvm/hyper-v: recommend using eVMCS only when it is enabled
  x86/kvm/hyper-v: don't recommend doing reset via synthetic MSR
  kvm: x86/vmx: Use kzalloc for cached_vmcs12
  KVM: VMX: Use the correct field var when clearing VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL
  KVM: x86: Fix single-step debugging
  x86/kvm/hyper-v: don't announce GUEST IDLE MSR support

Pull dma-mapping fix from Christoph Hellwig:
 "Fix a xen-swiotlb regression on arm64"

* tag 'dma-mapping-5.0-2' of git://git.infradead.org/users/hch/dma-mapping:
  arm64/xen: fix xen-swiotlb cache flushing

Pull libnvdimm fixes from Dan Williams:
 "A fix for namespace label support for non-Intel NVDIMMs that implement
  the ACPI standard label method.

  This has apparently never worked and could wait for v5.1. However it
  has enough visibility with hardware vendors [1] and distro bug
  trackers [2], and low enough risk that I decided it should go in for
  -rc4. The other fixups target the new, for v5.0, nvdimm security
  functionality. The larger init path fixup closes a memory leak and a
  potential userspace lockup due to missed notifications.

    [1] https://github.com/pmem/ndctl/issues/78
    [2] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1811785

  These have all soaked in -next for a week with no reported issues.

  Summary:

   - Fix support for NVDIMMs that implement the ACPI standard label
     methods.

   - Fix error handling for security overwrite (memory leak / userspace
     hang condition), and another one-line security cleanup"

* tag 'libnvdimm-fixes-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  acpi/nfit: Fix command-supported detection
  acpi/nfit: Block function zero DSMs
  libnvdimm/security: Require nvdimm_security_setup_events() to succeed
  nfit_test: fix security state pull for nvdimm security nfit_test

Pull input fixes from Dmitry Torokhov:
 "A fixup for the input_event fix for y2038 Sparc64, and couple other
  minor fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: input_event - fix the CONFIG_SPARC64 mixup
  Input: olpc_apsp - assign priv->dev earlier
  Input: uinput - fix undefined behavior in uinput_validate_absinfo()
  Input: raspberrypi-ts - fix link error
  Input: xpad - add support for SteelSeries Stratus Duo
  Input: input_event - provide override for sparc64

Pull networking fixes from David Miller:

 1) Count ttl-dropped frames properly in mac80211, from Bob Copeland.

 2) Integer overflow in ktime handling of bcm can code, from Oliver
    Hartkopp.

 3) Fix RX desc handling wrt. hw checksumming in ravb, from Simon
    Horman.

 4) Various hash key fixes in hv_netvsc, from Haiyang Zhang.

 5) Use after free in ax25, from Eric Dumazet.

 6) Several fixes to the SSN support in SCTP, from Xin Long.

 7) Do not process frames after a NAPI reschedule in ibmveth, from
    Thomas Falcon.

 8) Fix NLA_POLICY_NESTED arguments, from Johannes Berg.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (42 commits)
  qed: Revert error handling changes.
  cfg80211: extend range deviation for DMG
  cfg80211: reg: remove warn_on for a normal case
  mac80211: Add attribute aligned(2) to struct 'action'
  mac80211: don't initiate TDLS connection if station is not associated to AP
  nl80211: fix NLA_POLICY_NESTED() arguments
  ibmveth: Do not process frames after calling napi_reschedule
  net: dev_is_mac_header_xmit() true for ARPHRD_RAWIP
  net: usb: asix: ax88772_bind return error when hw_reset fail
  MAINTAINERS: Update cavium networking drivers
  net/mlx4_core: Fix error handling when initializing CQ bufs in the driver
  net/mlx4_core: Add masking for a few queries on HCA caps
  sctp: set flow sport from saddr only when it's 0
  sctp: set chunk transport correctly when it's a new asoc
  sctp: improve the events for sctp stream adding
  sctp: improve the events for sctp stream reset
  ip_tunnel: Make none-tunnel-dst tunnel port work with lwtunnel
  ax25: fix possible use-after-free
  sfc: suppress duplicate nvmem partition types in efx_ef10_mtd_probe
  hv_netvsc: fix typos in code comments
  ...

We can't touch a bio after ->make_request_fn(), for all we know it could
already have been completed by the time this function returns.

This reverts commit 698cef17.

Reported-by: syzbot+4df6ca820108fd248943@syzkaller.appspotmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull smb3 fixes from Steve French:
 "A set of small smb3 fixes, some fixing various crediting issues
  discovered during xfstest runs, five for stable"

* tag '5.0-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: print CIFSMaxBufSize as part of /proc/fs/cifs/DebugData
  smb3: add credits we receive from oplock/break PDUs
  CIFS: Fix mounts if the client is low on credits
  CIFS: Do not assume one credit for async responses
  CIFS: Fix credit calculations in compound mid callback
  CIFS: Fix credit calculation for encrypted reads with errors
  CIFS: Fix credits calculations for reads with errors
  CIFS: Do not reconnect TCP session in add_credits()
  smb3: Cleanup license mess
  CIFS: Fix possible hang during async MTU reads and writes
  cifs: fix memory leak of an allocated cifs_ntsd structure

Pull VFIO fixes from Alex Williamson:

 - cleanup licenses in new files (Thomas Gleixner)

 - cleanup new compiler warnings (Alexey Kardashevskiy)

* tag 'vfio-v5.0-rc4' of git://github.com/awilliam/linux-vfio:
  vfio-pci/nvlink2: Fix ancient gcc warnings
  vfio/pci: Cleanup license mess

Pull SCSI fixes from James Bottomley:
 "Six fixes, all of which appear to have user visible consequences.

  The DMA one is a regression fix from the merge window and of the
  others, four are driver specific and one specific to the target code"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: Use explicit access size in ufshcd_dump_regs
  scsi: tcmu: fix use after free
  scsi: csiostor: fix NULL pointer dereference in csio_vport_set_state()
  scsi: lpfc: nvmet: avoid hang / use-after-free when destroying targetport
  scsi: lpfc: nvme: avoid hang / use-after-free when destroying localport
  scsi: communicate max segment size to the DMA mapping code

Pull block fixes from Jens Axboe:
 "A collection of fixes for this release. This contains:

   - Silence sparse rightfully complaining about non-static wbt
     functions (Bart)

   - Fixes for the zoned comments/ioctl documentation (Damien)

   - direct-io fix that's been lingering for a while (Ernesto)

   - cgroup writeback fix (Tejun)

   - Set of NVMe patches for nvme-rdma/tcp (Sagi, Hannes, Raju)

   - Block recursion tracking fix (Ming)

   - Fix debugfs command flag naming for a few flags (Jianchao)"

* tag 'for-linus-20190125' of git://git.kernel.dk/linux-block:
  block: Fix comment typo
  uapi: fix ioctl documentation
  blk-wbt: Declare local functions static
  blk-mq: fix the cmd_flag_name array
  nvme-multipath: drop optimization for static ANA group IDs
  nvmet-rdma: fix null dereference under heavy load
  nvme-rdma: rework queue maps handling
  nvme-tcp: fix timeout handler
  nvme-rdma: fix timeout handler
  writeback: synchronize sync(2) against cgroup writeback membership switches
  block: cover another queue enter recursion via BIO_QUEUE_ENTERED
  direct-io: allow direct writes to empty inodes

This is new code and not bug fixes.

This reverts all changes added by merge commit
8fb18be9Signed-off-by: David S. Miller <davem@davemloft.net>

Pull MMC fixes from Ulf Hansson:

 - sdhci-acpi: Fixup build dependency for PCI

 - sdhci-omap: Resolve Kconfig warnings on keystone

 - sdhci-iproc: Propagate errors from DT parsing

 - meson-gx: Fixup IRQ handling in release callback

 - meson-gx: Use signal re-sampling to fixup tuning

 - dw_mmc-bluefield: Fix the license information

* tag 'mmc-v5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: dw_mmc-bluefield: : Fix the license information
  mmc: meson-gx: enable signal re-sampling together with tuning
  mmc: sdhci-iproc: handle mmc_of_parse() errors during probe
  mmc: meson-gx: Free irq in release() callback
  mmc: host: Fix Kconfig warnings on keystone_defconfig
  mmc: sdhci-acpi: Make PCI dependency explicit

Pull char/misc driver fixes from Greg KH:
 "Here are some small char and misc driver fixes to resolve some
  reported issues, as well as a number of binderfs fixups that were
  found after auditing the filesystem code by Al Viro. As binderfs
  hasn't been in a previous release yet, it's good to get these in now
  before the first users show up.

  All of these have been in linux-next for a bit with no reported
  issues"

* tag 'char-misc-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (26 commits)
  i3c: master: Fix an error checking typo in 'cdns_i3c_master_probe()'
  binderfs: switch from d_add() to d_instantiate()
  binderfs: drop lock in binderfs_binder_ctl_create
  binderfs: kill_litter_super() before cleanup
  binderfs: rework binderfs_binder_device_create()
  binderfs: rework binderfs_fill_super()
  binderfs: prevent renaming the control dentry
  binderfs: remove outdated comment
  binderfs: use __u32 for device numbers
  binderfs: use correct include guards in header
  misc: pvpanic: fix warning implicit declaration
  char/mwave: fix potential Spectre v1 vulnerability
  misc: ibmvsm: Fix potential NULL pointer dereference
  binderfs: fix error return code in binderfs_fill_super()
  mei: me: add denverton innovation engine device IDs
  mei: me: mark LBG devices as having dma support
  mei: dma: silent the reject message
  binderfs: handle !CONFIG_IPC_NS builds
  binderfs: reserve devices for initial mount
  binderfs: rename header to binderfs.h
  ...