- 12 Jun, 2023 11 commits
-
-
Christoph Hellwig authored
Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Phillip Potter <phil@philpotter.co.uk> Reviewed-by:
Hannes Reinecke <hare@suse.de> Acked-by:
Christian Brauner <brauner@kernel.org> Link: https://lore.kernel.org/r/20230608110258.189493-4-hch@lst.deSigned-off-by:
Jens Axboe <axboe@kernel.dk>
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
For whole devices ->open is called for each open, but for partitions it is only called on the first open of a partition, e.g.: open("/dev/vdb", ...) open("/dev/vdb", ...) - 2 call to ->open open("/dev/vdb1", ...) open("/dev/vdb", ...) - 2 call to ->open open("/dev/vdb", ...) open("/dev/vdb", ...) - just open call to ->open This is problematic as various block drivers look at open flags and might not do all the required setup if the earlier open was with an odd flag like O_NDELAY or the magic 3 ioctl-only open mode. Signed-off-by: -
Guoqing Jiang authored
Change the return type to void given it always returns 0. Acked-by:
Jack Wang <jinpu.wang@ionos.com> Signed-off-by:
Guoqing Jiang <guoqing.jiang@linux.dev> Link: https://lore.kernel.org/r/20230524070026.2932-9-guoqing.jiang@linux.devSigned-off-by:
-
Guoqing Jiang authored
With this, we can remove several lines of code. Acked-by:
-
Guoqing Jiang authored
Let's always set errno after pr_err which is consistent with default case. Acked-by:
-
Guoqing Jiang authored
It actually represents the name of rnbd_srv_dev. Acked-by:
-
Guoqing Jiang authored
Check ret is enough since if sess_dev is NULL which also implies ret should be 0. Acked-by:
-
Guoqing Jiang authored
Add one new array (marked with __maybe_unused to prevent gcc warning about "defined but not used" with W=1), then we can remove rnbd_access_mode_str and rnbd-common.c accordingly. Signed-off-by:
-
Guoqing Jiang authored
No need to include it since none of macros in limits.h are used by rnbd-srv. Acked-by:
-
Guoqing Jiang authored
This routine is not called since added. Then the two flags (RNBD_OP_LAST and RNBD_F_ALL) can be removed too after kill rnbd_flags_supported. Acked-by:
-
- 09 Jun, 2023 1 commit
-
-
Christoph Hellwig authored
The previous rootwait fix added an -EINVAL return to a completely bogus superflous branch, fix this. Fixes: 1341c7d2 ("block: fix rootwait=") Reported-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Fabio Estevam <festevam@gmail.com> Tested-by:
Marek Szyprowski <m.szyprowski@samsung.com> Tested-by:
-
- 07 Jun, 2023 14 commits
-
-
Andy Shevchenko authored
Sort the headers in alphabetic order in order to ease the maintenance for this part. Signed-off-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Link: https://lore.kernel.org/r/20230310164549.22133-10-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Andy Shevchenko authored
In the snippets like the following if (...) return / goto / break / continue ...; else ... the 'else' is redundant. Get rid of it. Signed-off-by:
-
Andy Shevchenko authored
This makes the driver code slightly better to understand. Signed-off-by:
-
Andy Shevchenko authored
Use DEFINE_SHOW_ATTRIBUTE() helper macro to simplify the code. No functional change. Signed-off-by:
-
Andy Shevchenko authored
Since the commit 72deb455 ("block: remove CONFIG_LBDAF") the sector_t is always 64-bit type, no need to cast anymore. Signed-off-by:
-
Andy Shevchenko authored
The code can be neater without forward declarations. Get rid of pkt_seq_show() forward declaration. This will also allow futher cleanups to be cleaner. Signed-off-by:
-
Andy Shevchenko authored
Follow the advice of the Documentation/filesystems/sysfs.rst and show() should only use sysfs_emit() or sysfs_emit_at() when formatting the value to be returned to user space. Signed-off-by:
-
Andy Shevchenko authored
The checkpatch.pl warns: "Prefer kstrto<type> to single variable sscanf". Fix the code accordingly. Signed-off-by:
-
Andy Shevchenko authored
We may use traditional dev_*() macros instead of custom ones provided by the driver. Signed-off-by:
-
Christoph Hellwig authored
Failures to look up the gendisk must return -ENODEV so that rootwait retries the lookup instead of -EINVAL which exits early. Fixes: cf056a43 ("init: improve the name_to_dev_t interface") Reported-by:
-
Waiman Long authored
When blkg_alloc() is called to allocate a blkcg_gq structure with the associated blkg_iostat_set's, there are 2 fields within blkg_iostat_set that requires proper initialization - blkg & sync. The former field was introduced by commit 3b8cc629 ("blk-cgroup: Optimize blkcg_rstat_flush()") while the later one was introduced by commit f7331648 ("blk-cgroup: reimplement basic IO stats using cgroup rstat"). Unfortunately those fields in the blkg_iostat_set's are not properly re-initialized when they are cleared in v1's blkcg_reset_stats(). This can lead to a kernel panic due to NULL pointer access of the blkg pointer. The missing initialization of sync is less problematic and can be a problem in a debug kernel due to missing lockdep initialization. Fix these problems by re-initializing them after memory clearing. Fixes: 3b8cc629 ("blk-cgroup: Optimize blkcg_rstat_flush()") Fixes: f7331648 ("blk-cgroup: reimplement basic IO stats using cgroup rstat") Signed-off-by:
Waiman Long <longman@redhat.com> Reviewed-by:
Ming Lei <ming.lei@redhat.com> Acked-by:
Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20230606180724.2455066-1-longman@redhat.comSigned-off-by:
-
Yu Kuai authored
Recursive spin_lock/unlock_irq() is not safe, because spin_unlock_irq() will enable irq unconditionally: spin_lock_irq queue_lock -> disable irq spin_lock_irq ioc->lock spin_unlock_irq ioc->lock -> enable irq /* * AA dead lock will be triggered if current context is preempted by irq, * and irq try to hold queue_lock again. */ spin_unlock_irq queue_lock Fix this problem by using spin_lock/unlock() directly for 'ioc->lock'. Fixes: 5a0ac57c ("blk-ioc: protect ioc_destroy_icq() by 'queue_lock'") Signed-off-by:
Yu Kuai <yukuai3@huawei.com> Reviewed-by:
-
Zhong Jinghua authored
If the index allocated by idr_alloc greater than MINORMASK >> part_shift, the device number will overflow, resulting in failure to create a block device. Fix it by imiting the size of the max allocation. Signed-off-by:
Zhong Jinghua <zhongjinghua@huawei.com> Reviewed-by:
-
Hou Tao authored
Since commit a78418e6 ("block: Always initialize bio IO priority on submit"), bio->bi_ioprio will never be IOPRIO_CLASS_NONE when calling blkcg_set_ioprio(), so there will be no way to promote the io-priority of one cgroup to IOPRIO_CLASS_RT, because bi_ioprio will always be greater than or equals to IOPRIO_CLASS_RT. It seems possible to call blkcg_set_ioprio() first then try to initialize bi_ioprio later in bio_set_ioprio(), but this doesn't work for bio in which bi_ioprio is already initialized (e.g., direct-io), so introduce a new promote-to-rt policy to promote the iopriority of bio to IOPRIO_CLASS_RT if the ioprio is not already RT. For none-to-rt policy, although it doesn't work now, but considering that its purpose was also to override the io-priority to RT and allowing for a smoother transition, just keep it and treat it as an alias of the promote-to-rt policy. Acked-by:
Bart Van Assche <bvanassche@acm.org> Reviewed-by:
Chaitanya Kulkarni <kch@nvidia.com> Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Hou Tao <houtao1@huawei.com> Reviewed-by:
Bagas Sanjaya <bagasdotme@gmail.com> Link: https://lore.kernel.org/r/20230428074404.280532-1-houtao@huaweicloud.comSigned-off-by:
-
- 05 Jun, 2023 14 commits
-
-
Li Nan authored
adjust_inuse_and_calc_cost() use spin_lock_irq() and IRQ will be enabled when unlock. DEADLOCK might happen if we have held other locks and disabled IRQ before invoking it. Fix it by using spin_lock_irqsave() instead, which can keep IRQ state consistent with before when unlock. ================================ WARNING: inconsistent lock state 5.10.0-02758-g8e5f91fd772f #26 Not tainted -------------------------------- inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. kworker/2:3/388 [HC0[0]:SC0[0]:HE0:SE1] takes: ffff888118c00c28 (&bfqd->lock){?.-.}-{2:2}, at: spin_lock_irq ffff888118c00c28 (&bfqd->lock){?.-.}-{2:2}, at: bfq_bio_merge+0x141/0x390 {IN-HARDIRQ-W} state was registered at: __lock_acquire+0x3d7/0x1070 lock_acquire+0x197/0x4a0 __raw_spin_lock_irqsave _raw_spin_lock_irqsave+0x3b/0x60 bfq_idle_slice_timer_body bfq_idle_slice_timer+0x53/0x1d0 __run_hrtimer+0x477/0xa70 __hrtimer_run_queues+0x1c6/0x2d0 hrtimer_interrupt+0x302/0x9e0 local_apic_timer_interrupt __sysvec_apic_timer_interrupt+0xfd/0x420 run_sysvec_on_irqstack_cond sysvec_apic_timer_interrupt+0x46/0xa0 asm_sysvec_apic_timer_interrupt+0x12/0x20 irq event stamp: 837522 hardirqs last enabled at (837521): [<ffffffff84b9419d>] __raw_spin_unlock_irqrestore hardirqs last enabled at (837521): [<ffffffff84b9419d>] _raw_spin_unlock_irqrestore+0x3d/0x40 hardirqs last disabled at (837522): [<ffffffff84b93fa3>] __raw_spin_lock_irq hardirqs last disabled at (837522): [<ffffffff84b93fa3>] _raw_spin_lock_irq+0x43/0x50 softirqs last enabled at (835852): [<ffffffff84e00558>] __do_softirq+0x558/0x8ec softirqs last disabled at (835845): [<ffffffff84c010ff>] asm_call_irq_on_stack+0xf/0x20 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&bfqd->lock); <Interrupt> lock(&bfqd->lock); *** DEADLOCK *** 3 locks held by kworker/2:3/388: #0: ffff888107af0f38 ((wq_completion)kthrotld){+.+.}-{0:0}, at: process_one_work+0x742/0x13f0 #1: ffff8881176bfdd8 ((work_completion)(&td->dispatch_work)){+.+.}-{0:0}, at: process_one_work+0x777/0x13f0 #2: ffff888118c00c28 (&bfqd->lock){?.-.}-{2:2}, at: spin_lock_irq #2: ffff888118c00c28 (&bfqd->lock){?.-.}-{2:2}, at: bfq_bio_merge+0x141/0x390 stack backtrace: CPU: 2 PID: 388 Comm: kworker/2:3 Not tainted 5.10.0-02758-g8e5f91fd772f #26 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 Workqueue: kthrotld blk_throtl_dispatch_work_fn Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x107/0x167 print_usage_bug valid_state mark_lock_irq.cold+0x32/0x3a mark_lock+0x693/0xbc0 mark_held_locks+0x9e/0xe0 __trace_hardirqs_on_caller lockdep_hardirqs_on_prepare.part.0+0x151/0x360 trace_hardirqs_on+0x5b/0x180 __raw_spin_unlock_irq _raw_spin_unlock_irq+0x24/0x40 spin_unlock_irq adjust_inuse_and_calc_cost+0x4fb/0x970 ioc_rqos_merge+0x277/0x740 __rq_qos_merge+0x62/0xb0 rq_qos_merge bio_attempt_back_merge+0x12c/0x4a0 blk_mq_sched_try_merge+0x1b6/0x4d0 bfq_bio_merge+0x24a/0x390 __blk_mq_sched_bio_merge+0xa6/0x460 blk_mq_sched_bio_merge blk_mq_submit_bio+0x2e7/0x1ee0 __submit_bio_noacct_mq+0x175/0x3b0 submit_bio_noacct+0x1fb/0x270 blk_throtl_dispatch_work_fn+0x1ef/0x2b0 process_one_work+0x83e/0x13f0 process_scheduled_works worker_thread+0x7e3/0xd80 kthread+0x353/0x470 ret_from_fork+0x1f/0x30 Fixes: b0853ab4 ("blk-iocost: revamp in-period donation snapbacks") Signed-off-by:Li Nan <linan122@huawei.com> Acked-by:
-
Christoph Hellwig authored
early_lookup_bdev is now only used during the early boot code as it should, so mark it __init to not waste run time memory on it. Signed-off-by:
-
Christoph Hellwig authored
early_lookup_bdev is supposed to only be called from the early boot code, but mdtblock_early_get_bdev is called as a general fallback when lookup_bdev fails, which is problematic because early_lookup_bdev bypasses all normal path based permission checking, and might cause problems with certain container environments renaming devices. Switch to only call early_lookup_bdev when block2mtd is built-in and the system state in not running yet. Note that this strictly speaking changes the kernel ABI as the PARTUUID= and PARTLABEL= style syntax is now not available during a running systems. They never were intended for that, but this breaks things we'll have to figure out a way to make them available again. But if avoidable in any way I'd rather avoid that. Signed-off-by:
Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/r/20230531125535.676098-24-hch@lst.deSigned-off-by:
-
Christoph Hellwig authored
Simplify add_device a bit by splitting out the cumbersome early boot logic into a separate helper. Signed-off-by:
-
Christoph Hellwig authored
resume_store is a sysfs attribute written during normal kernel runtime, and it should not use the early_lookup_bdev API that bypasses all normal path based permission checking, and might cause problems with certain container environments renaming devices. Switch to lookup_bdev, which does a normal path lookup instead, and fall back to trying to parse a numeric dev_t just like early_lookup_bdev did. Note that this strictly speaking changes the kernel ABI as the PARTUUID= and PARTLABEL= style syntax is now not available during a running systems. They never were intended for that, but this breaks things we'll have to figure out a way to make them available again. But if avoidable in any way I'd rather avoid that. Fixes: 421a5fa1 ("PM / hibernate: use name_to_dev_t to parse resume") Signed-off-by:
Rafael J. Wysocki <rafael@kernel.org> Link: https://lore.kernel.org/r/20230531125535.676098-22-hch@lst.deSigned-off-by:
-
Christoph Hellwig authored
early_lookup_bdev is supposed to only be called from the early boot code, but dm_get_device calls it as a general fallback when lookup_bdev fails, which is problematic because early_lookup_bdev bypasses all normal path based permission checking, and might cause problems with certain container environments renaming devices. Switch to only call early_lookup_bdev when dm is built-in and the system state in not running yet. This means it is still available when tables are constructed by dm-init.c from the kernel command line, but not otherwise. Note that this strictly speaking changes the kernel ABI as the PARTUUID= and PARTLABEL= style syntax is now not available during a running systems. They never were intended for that, but this breaks things we'll have to figure out a way to make them available again. But if avoidable in any way I'd rather avoid that. Signed-off-by:
Mike Snitzer <snitzer@kernel.org> Link: https://lore.kernel.org/r/20230531125535.676098-21-hch@lst.deSigned-off-by:
-
Christoph Hellwig authored
Open code dm_get_dev_t in the only remaining caller, and propagate the exact error code from lookup_bdev and early_lookup_bdev. Signed-off-by:
-
Christoph Hellwig authored
dm_init_init is called from early boot code, and thus lookup_bdev will never succeed. Just open code that call to early_lookup_bdev instead. Signed-off-by:
-
Christoph Hellwig authored
Use the block_device acquired in dm_get_device for the check instead of doing an extra lookup. Signed-off-by:
-
Christoph Hellwig authored
blk_lookup_devt is only used by code in early-lookup.c, so move it there. printk_all_partitions and it's helper bdevt_str are only used by the early init code in init/do_mounts.c, so they should go there as well. Signed-off-by:
-
Christoph Hellwig authored
Create a new block/early-lookup.c to keep the early block device lookup code instead of having this code sit with the early mount code. Signed-off-by:
-
Christoph Hellwig authored
Instead of only clearing root_wait in devt_from_partuuid when the UUID format was invalid, do that in parse_root_device for all strings that failed to parse. Signed-off-by:
-
Christoph Hellwig authored
name_to_dev_t has a very misleading name, that doesn't make clear it should only be used by the early init code, and also has a bad calling convention that doesn't allow returning different kinds of errors. Rename it to early_lookup_bdev to make the use case clear, and return an errno, where -EINVAL means the string could not be parsed, and -ENODEV means it the string was valid, but there was no device found for it. Also stub out the whole call for !CONFIG_BLOCK as all the non-block root cases are always covered in the caller. Signed-off-by:
-
Christoph Hellwig authored
The nfs/cifs/ram special case only needs to be parsed once, and only in the boot code. Move them out of name_to_dev_t and into prepare_namespace. Signed-off-by:
-
