- 17 Mar, 2020 19 commits
-
-
Takashi Iwai authored
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). [mkp: checkpatch fix] Link: https://lore.kernel.org/r/20200315094241.9086-5-tiwai@suse.de Cc: "James E . J . Bottomley" <jejb@linux.ibm.com> Cc: "Martin K . Petersen" <martin.petersen@oracle.com> Cc: Achim Leubner <achim_leubner@adaptec.com> Cc: linux-scsi@vger.kernel.org Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com>
-
Takashi Iwai authored
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Link: https://lore.kernel.org/r/20200315094241.9086-4-tiwai@suse.de Cc: "James E . J . Bottomley" <jejb@linux.ibm.com> Cc: "Martin K . Petersen" <martin.petersen@oracle.com> Cc: Satish Kharat <satishkh@cisco.com> Cc: Sesidhar Baddela <sebaddel@cisco.com> Cc: Karan Tilak Kumar <kartilak@cisco.com> Cc: linux-scsi@vger.kernel.org Signed-off-by:
-
Takashi Iwai authored
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Link: https://lore.kernel.org/r/20200315094241.9086-3-tiwai@suse.de Cc: "James E . J . Bottomley" <jejb@linux.ibm.com> Cc: "Martin K . Petersen" <martin.petersen@oracle.com> Cc: Subbu Seetharaman <subbu.seetharaman@broadcom.com> Cc: Ketan Mukadam <ketan.mukadam@broadcom.com> Cc: Jitendra Bhivare <jitendra.bhivare@broadcom.com> Cc: linux-scsi@vger.kernel.org Signed-off-by:
-
Takashi Iwai authored
Since snprintf() returns the would-be-output size instead of the actual output size, the succeeding calls may go beyond the given buffer limit. Fix it by replacing with scnprintf(). Link: https://lore.kernel.org/r/20200315094241.9086-2-tiwai@suse.de Cc: "James E . J . Bottomley" <jejb@linux.ibm.com> Cc: "Martin K . Petersen" <martin.petersen@oracle.com> Cc: Adaptec OEM Raid Solutions <aacraid@microsemi.com> Cc: linux-scsi@vger.kernel.org Acked-by:
Balsundar P <Balsundar.P@microchip.com> Signed-off-by:
-
Jens Remus authored
Log any FC Endpoint Security errors to the kernel ring buffer with rate- limiting. Link: https://lore.kernel.org/r/20200312174505.51294-11-maier@linux.ibm.comReviewed-by:
Steffen Maier <maier@linux.ibm.com> Signed-off-by:
Jens Remus <jremus@linux.ibm.com> Signed-off-by:
-
Jens Remus authored
Enable for explicit FCP channel FC Endpoint Security error reporting and handle any FSF security errors according to specification. Take the following recovery actions when a FSF_SECURITY_ERROR is reported for the specified FSF commands: - Open Port: Retry the command if possible - Send FCP : Physically close the remote port and reopen For Open Port the command status is set to error, which triggers a retry. For Send FCP the command status is set to error and recovery is triggered to physically reopen the remote port. Link: https://lore.kernel.org/r/20200312174505.51294-10-maier@linux.ibm.comReviewed-by:
-
Jens Remus authored
Trace changes in Fibre Channel Endpoint Security capabilities of FCP devices as well as changes in Fibre Channel Endpoint Security state of their connections to FC remote ports as FC Endpoint Security changes with trace level 3 in HBA DBF. A change in FC Endpoint Security capabilities of FCP devices is traced as response to FSF command FSF_QTCB_EXCHANGE_PORT_DATA with a trace tag of "fsfcesa" and a WWPN of ZFCP_DBF_INVALID_WWPN = 0x0000000000000000 (see FC-FS-4 §18 "Name_Identifier Formats", NAA field). A change in FC Endpoint Security state of connections between FCP devices and FC remote ports is traced as response to FSF command FSF_QTCB_OPEN_PORT_WITH_DID with a trace tag of "fsfcesp". Example trace record of FC Endpoint Security capability change of FCP device formatted with zfcpdbf from s390-tools: Timestamp : ... Area : HBA Subarea : 00 Level : 3 Exception : - CPU ID : ... Caller : 0x... Record ID : 5 ZFCP_DBF_HBA_FCES Tag : fsfcesa FSF FC Endpoint Security adapter Request ID : 0x... Request status : 0x00000010 FSF cmnd : 0x0000000e FSF_QTCB_EXCHANGE_PORT_DATA FSF sequence no: 0x... FSF issued : ... FSF stat : 0x00000000 FSF_GOOD FSF stat qual : n/a Prot stat : n/a Prot stat qual : n/a Port handle : 0x00000000 none (invalid) LUN handle : n/a WWPN : 0x0000000000000000 ZFCP_DBF_INVALID_WWPN FCES old : 0x00000000 old FC Endpoint Security FCES new : 0x00000007 new FC Endpoint Security Example trace record of FC Endpoint Security change of connection to FC remote port formatted with zfcpdbf from s390-tools: Timestamp : ... Area : HBA Subarea : 00 Level : 3 Exception : - CPU ID : ... Caller : 0x... Record ID : 5 ZFCP_DBF_HBA_FCES Tag : fsfcesp FSF FC Endpoint Security port Request ID : 0x... Request status : 0x00000010 FSF cmnd : 0x00000005 FSF_QTCB_OPEN_PORT_WITH_DID FSF sequence no: 0x... FSF issued : ... FSF stat : 0x00000000 FSF_GOOD FSF stat qual : n/a Prot stat : n/a Prot stat qual : n/a Port handle : 0x... WWPN : 0x500507630401120c WWPN FCES old : 0x00000000 old FC Endpoint Security FCES new : 0x00000004 new FC Endpoint Security Link: https://lore.kernel.org/r/20200312174505.51294-9-maier@linux.ibm.comReviewed-by:
-
Jens Remus authored
Log the usage of and subsequent changes in FC Endpoint Security of connections between FCP devices and FC remote ports to the kernel ring buffer. Activation of FC Endpoint Security is logged as informational. Change and deactivation are logged as warning. No logging takes place, if FC Endpoint Security is not used (i.e. never activated) on a connection or if it does not change during reopen of a port (e.g. due to adapter or port recovery). Link: https://lore.kernel.org/r/20200312174505.51294-8-maier@linux.ibm.comReviewed-by:
Fedor Loshakov <loshakov@linux.ibm.com> Signed-off-by:
-
Jens Remus authored
Add an interface to read Fibre Channel Endpoint Security information of FCP channels and their connections to FC remote ports. It comes in the form of new sysfs attributes that are attached to the CCW device representing the FCP device and its zfcp port objects. The read-only sysfs attribute "fc_security" of a CCW device representing a FCP device shows the FC Endpoint Security capabilities of the device. Possible values are: "unknown", "unsupported", "none", or a comma- separated list of one or more mnemonics and/or one hexadecimal value representing the supported FC Endpoint Security: Authentication: Authentication supported Encryption : Encryption supported The read-only sysfs attribute "fc_security" of a zfcp port object shows the FC Endpoint Security used on the connection between its parent FCP device and the FC remote port. Possible values are: "unknown", "unsupported", "none", or a mnemonic or hexadecimal value representing the FC Endpoint Security used: Authentication: Connection has been authenticated Encryption : Connection is encrypted Both sysfs attributes may return hexadecimal values instead of mnemonics, if the mnemonic lookup table does not contain an entry for the FC Endpoint Security reported by the FCP device. Link: https://lore.kernel.org/r/20200312174505.51294-7-maier@linux.ibm.comReviewed-by:
Benjamin Block <bblock@linux.ibm.com> Signed-off-by:
-
Jens Remus authored
Introduce automatic variables for adapter and QTCB bottom in zfcp_fsf_open_port_handler(). This facilitates subsequent changes to meet the 80 character per line limit. Link: https://lore.kernel.org/r/20200312174505.51294-6-maier@linux.ibm.comReviewed-by:
-
Steffen Maier authored
When we get an unsolicited notification on local link went down, zfcp_fsf_status_read_link_down() calls zfcp_fsf_link_down_info_eval(). This only blocks rports, and sets ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED and ZFCP_STATUS_COMMON_ERP_FAILED. Only the fc_host port_state changes to "Linkdown", because zfcp_scsi_get_host_port_state() is an active callback and uses the adapter status. Other fc_host attributes model, port_id, port_type, speed, fabric_name (and zfcp device attributes card_version, peer_wwpn, peer_wwnn, peer_d_id) which depend on a local link, continued to show their last known "good" value. Only if something triggered an exchange config data, some values were updated to their unknown equivalent via case FSF_EXCHANGE_CONFIG_DATA_INCOMPLETE due to local link down. Triggers for exchange config data are adapter recovery, or reading any of the following zfcp-specific scsi host sysfs attributes "requests", "megabytes", or "seconds_active" in /sys/devices/css*/*.*.*/*.*.*/host*/scsi_host/host*/. The other fc_host attributes active_fc4s and permanent_port_name continued to show their last known "good" value. Only if something triggered an exchange port data, some values changed. Active_fc4s became all zeros as unknown equivalent during link down. Permanent_port_name does not depend on a local link. But for non-NPIV FCP devices, permanent_port_name erroneously became whatever value fc_host port_name had at that point in time (see previous paragraph). Triggers for exchange port data are the zfcp-specific scsi host sysfs attribute "utilization", or [{reset,get}_fc_host_stats] write anything into "reset_statistics" or read any of the other attributes under /sys/devices/css*/*.*.*/*.*.*/host*/fc_host/host*/statistics/. (cf. v4.9 commit bd77befa ("zfcp: fix fc_host port_type with NPIV")) This is particularly confusing when using "lszfcp -b <fcpdevbusid> -Ha" or dbginfo.sh which read fc_host attributes and also scsi_host attributes. After link down, the first invocation produces (abbreviated): Class = "fc_host" active_fc4s = "0x00 0x00 0x01 0x00 ..." ... fabric_name = "0x10000027f8e04c49" ... permanent_port_name = "0xc05076e4588059c1" port_id = "0x244800" port_state = "Linkdown" port_type = "NPort (fabric via point-to-point)" ... speed = "16 Gbit" Class = "scsi_host" ... megabytes = "0 0" ... requests = "0 0 0" seconds_active = "37" ... utilization = "0 0 0" The second and next invocations produce (abbreviated): Class = "fc_host" active_fc4s = "0x00 0x00 0x00 0x00 ..." ... fabric_name = "0x0" ... permanent_port_name = "0x0" port_id = "0x000000" port_state = "Linkdown" port_type = "Unknown" ... speed = "unknown" Class = "scsi_host" ... megabytes = "0 0" ... requests = "0 0 0" seconds_active = "38" ... utilization = "0 0 0" Factor out the resetting of local link dependent fc_host attributes from zfcp_fsf_exchange_config_data_handler() case FSF_EXCHANGE_CONFIG_DATA_INCOMPLETE into a new helper function zfcp_fsf_fc_host_link_down(). All code places that detect local link down (SRB, FSF_PROT_LINK_DOWN, xconf data/port incomplete) call zfcp_fsf_link_down_info_eval(). Call the new helper from there. This works because zfcp_fsf_link_down_info_eval() and thus the helper is called before zfcp_fsf_exchange_{config,port}_evaluate(). Port_name and node_name are always valid, so never reset them. Get the permanent_port_name from exchange port data unconditionally as it always has a valid known good value, even during link down. Note: Rather than hardcode in zfcp_fsf_exchange_config_evaluate(), fc_host supported_classes could theoretically get its value from fsf_qtcb_bottom_port.class_of_service in zfcp_fsf_exchange_port_evaluate(). When the link comes back, we get a different notification, perform adapter recovery, and this triggers an implicit exchange config data followed by exchange port data filling in the link dependent fc_host attributes with known good values again. Link: https://lore.kernel.org/r/20200312174505.51294-5-maier@linux.ibm.comReviewed-by: -
Steffen Maier authored
Manufacturer, HBA model, firmware version, and hardware version. Use the same value format as for the driver-specific attributes. Keep the driver-specific attributes for stable user space sysfs API. Link: https://lore.kernel.org/r/20200312174505.51294-4-maier@linux.ibm.comReviewed-by:
-
Steffen Maier authored
FICON Express8S or older, as well as card features newer than FICON Express16S+ have no certain firmware level requirement. FICON Express16S or FICON Express16S+ have the following minimum firmware level requirements to show a proper fabric name value: z13 machine FICON Express16S , MCL P08424.005 , LIC version 0x00000721 z14 machine FICON Express16S , MCL P42611.008 , LIC version 0x10200069 FICON Express16S+ , MCL P42625.010 , LIC version 0x10300147 Otherwise, the read value is not the fabric name. Each FCP channel of these card features might need one SAN fabric re-login after concurrent microcode update in order to show the proper fabric name. Possible ways to trigger a SAN fabric re-login are one of: Pull fibres between FCP channel port and SAN switch port on either side and re-plug, disable SAN switch port adjacent to FCP channel port and re-enable switch port, or at Service Element toggle off all CHPIDs of FCP channel over all LPARs and toggle CHPIDs on again. Zfcp operating subchannels (FCP devices) on such FCP channel recovers a fabric re-login. Initialize fabric name for any topology and have it an invalid WWPN 0x0 for anything but fabric topology. Otherwise for e.g. point-to-point topology one could see the initial -1 from fc_host_setup() and after a link unplug our fabric name would turn to 0x0 (with subsequent commit ("zfcp: fix fc_host attributes that should be unknown on local link down") and stay 0x0 on link replug. I did not initialize to 0x0 somewhere even earlier in the code path such that it would not flap from real to 0x0 to real on e.g. an exchange config data with fabric topology. Link: https://lore.kernel.org/r/20200312174505.51294-3-maier@linux.ibm.comReviewed-by: -
Steffen Maier authored
v2.6.27 commit cc8c2829 ("[SCSI] zfcp: Automatically attach remote ports") introduced zfcp automatic port scan. Before that, the user had to use the sysfs attribute "port_add" of an FCP device (adapter) to add and open remote (target) ports, even for the remote peer port in point-to-point topology. That code path did a proper port open recovery trigger taking the erp_lock. Since above commit, a new helper function zfcp_erp_open_ptp_port() performed an UNlocked port open recovery trigger. This can race with other parallel recovery triggers. In zfcp_erp_action_enqueue() this could corrupt e.g. adapter->erp_total_count or adapter->erp_ready_head. As already found for fabric topology in v4.17 commit fa89adba ("scsi: zfcp: fix infinite iteration on ERP ready list"), there was an endless loop during tracing of rport (un)block. A subsequent v4.18 commit 9e156c54 ("scsi: zfcp: assert that the ERP lock is held when tracing a recovery trigger") introduced a lockdep assertion for that case. As a side effect, that lockdep assertion now uncovered the unlocked code path for PtP. It is from within an adapter ERP action: zfcp_erp_strategy[1479] intentionally DROPs erp lock around zfcp_erp_strategy_do_action() zfcp_erp_strategy_do_action[1441] NO erp lock zfcp_erp_adapter_strategy[876] NO erp lock zfcp_erp_adapter_strategy_open[855] NO erp lock zfcp_erp_adapter_strategy_open_fsf[806]NO erp lock zfcp_erp_adapter_strat_fsf_xconf[772] erp lock only around zfcp_erp_action_to_running(), BUT *_not_* around zfcp_erp_enqueue_ptp_port() zfcp_erp_enqueue_ptp_port[728] BUG: *_not_* taking erp lock _zfcp_erp_port_reopen[432] assumes to be called with erp lock zfcp_erp_action_enqueue[314] assumes to be called with erp lock zfcp_dbf_rec_trig[288] _checks_ to be called with erp lock: lockdep_assert_held(&adapter->erp_lock); It causes the following lockdep warning: WARNING: CPU: 2 PID: 775 at drivers/s390/scsi/zfcp_dbf.c:288 zfcp_dbf_rec_trig+0x16a/0x188 no locks held by zfcperp0.0.17c0/775. Fix this by using the proper locked recovery trigger helper function. Link: https://lore.kernel.org/r/20200312174505.51294-2-maier@linux.ibm.com Fixes: cc8c2829 ("[SCSI] zfcp: Automatically attach remote ports") Cc: <stable@vger.kernel.org> #v2.6.27+ Reviewed-by:
-
Bart Van Assche authored
This makes the SCSI tracing code slightly easier to read. Link: https://lore.kernel.org/r/20200313203102.16613-6-bvanassche@acm.org Fixes: bf816235 ("[SCSI] add scsi trace core functions and put trace points") Cc: Christoph Hellwig <hch@lst.de> Cc: James E.J. Bottomley <jejb@linux.ibm.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Reported-by:
Colin Ian King <colin.king@canonical.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Bart Van Assche <bvanassche@acm.org> Signed-off-by:
-
Bart Van Assche authored
Use these functions instead of open-coding them. Link: https://lore.kernel.org/r/20200313203102.16613-5-bvanassche@acm.org Cc: Kai Makisara <Kai.Makisara@kolumbus.fi> Cc: James E.J. Bottomley <jejb@linux.ibm.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by:
-
Bart Van Assche authored
Move the get_unaligned_be24(), get_unaligned_le24() and put_unaligned_le24() definitions from various drivers into include/linux/unaligned/generic.h. Add a put_unaligned_be24() implementation. Link: https://lore.kernel.org/r/20200313203102.16613-4-bvanassche@acm.org Cc: Keith Busch <kbusch@kernel.org> Cc: Sagi Grimberg <sagi@grimberg.me> Cc: Jens Axboe <axboe@fb.com> Cc: Harvey Harrison <harvey.harrison@gmail.com> Cc: Martin K. Petersen <martin.petersen@oracle.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Andrew Morton <akpm@linux-foundation.org> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> # For drivers/usb Reviewed-by: Felipe Balbi <balbi@kernel.org> # For drivers/usb/gadget Signed-off-by:
-
Bart Van Assche authored
Use the generic __{get,put}_unaligned_[bl]e() definitions instead of duplicating these. Since a later patch will add more definitions into <linux/unaligned/generic.h>, this patch ensures that these definitions have to be added only once. See also commit a7f626c1 ("C6X: headers"). See also commit 6510d419 ("kernel: Move arches to use common unaligned access"). Link: https://lore.kernel.org/r/20200313203102.16613-3-bvanassche@acm.org Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com> Reviewed-by:Mark Salter <msalter@redhat.com> Signed-off-by:
-
Bart Van Assche authored
The C language supports implicitly casting a void pointer into a non-void pointer. Remove explicit void pointer to non-void pointer casts because these are superfluous. Link: https://lore.kernel.org/r/20200313203102.16613-2-bvanassche@acm.org Cc: Harvey Harrison <harvey.harrison@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Andrew Morton <akpm@linux-foundation.org> Reviewed-by:
-
- 16 Mar, 2020 2 commits
-
-
Ryan Attard authored
Allow users with read permissions to issue REPORT ZONE commands and users with write permissions to manage zones on block devices supporting the ZBC specification. Link: https://lore.kernel.org/r/20200226170518.92963-2-ryanattard@ryanattard.infoSigned-off-by:
Ryan Attard <ryanattard@ryanattard.info> Reviewed-by:
Damien Le Moal <damien.lemoal@wdc.com> Signed-off-by:
-
Luo Jiaxing authored
The print of pr_err() does not come with device information, so replace it with dev_err(). Also improve the grammar in the message. Link: https://lore.kernel.org/r/1583940144-230800-1-git-send-email-john.garry@huawei.comSigned-off-by:
Luo Jiaxing <luojiaxing@huawei.com> Signed-off-by:
John Garry <john.garry@huawei.com> Signed-off-by:
-
- 12 Mar, 2020 19 commits
-
-
Ewan D. Milne authored
Large queues of I/O to offline devices that are eventually submitted when devices are unblocked result in a many repeated "rejecting I/O to offline device" messages. These messages can fill up the dmesg buffer in crash dumps so no useful prior messages remain. In addition, if a serial console is used, the flood of messages can cause a hard lockup in the console code. Introduce a flag indicating the message has already been logged for the device, and reset the flag when scsi_device_set_state() changes the device state. Link: https://lore.kernel.org/r/20200311143930.20674-1-emilne@redhat.comReviewed-by:
Ewan D. Milne <emilne@redhat.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
This file had its own peculiar style, not following any other files inside the Kernel (as far as I saw). Had to do a number of changes here, starting by removing the two leading asterisks from each line, adding table and literal block markups and changing whitespace and blank lines. The end result is that (IMHO), it is now a lot easier to read it as a text file, while producing a good html output. Link: https://lore.kernel.org/r/6f8e4da4ea643adbe048f55504a59427c5e50c97.1583136624.git.mchehab+huawei@kernel.orgSigned-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by:
-
-
Mauro Carvalho Chehab authored
Link: https://lore.kernel.org/r/052d45576e342a217185e91a83793b384b1592a4.1583136624.git.mchehab+huawei@kernel.orgAcked-by:
Avri Altman <avri.altman@wdc.com> Signed-off-by:
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
