- 03 Feb, 2021 11 commits
-
-
Namhyung Kim authored
Like in __event__synthesize_thread(), I think it's better to use scandir() instead of the readdir() loop. In case some malicious task continues to create new threads, the readdir() loop will run over and over to collect tids. The scandir() also has the problem but the window is much smaller since it doesn't do much work during the iteration. Also add filter_task() function as we only care the tasks. Signed-off-by:
Namhyung Kim <namhyung@kernel.org> Acked-by:
Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lore.kernel.org/r/20210202090118.2008551-4-namhyung@kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Namhyung Kim authored
To synthesize information to resolve sample IPs, it needs to scan task and mmap info from the /proc filesystem. For each process, it opens (and reads) status and maps file respectively. But as kernel threads don't have memory maps so we can skip the maps file. To find kernel threads, check "VmPeak:" line in /proc/<PID>/status file. It's about the peak virtual memory usage so only user-level tasks have that. Note that it's possible to miss the line due to partial reads. So we should double-check if it's a really kernel thread when there's no VmPeak line. Thus check "Threads:" line (which follows the VmPeak line whether or not it exists) to be sure it's read enough data - just in case of deeply nested pid namespaces or large number of supplementary groups are involved. This is for user process: $ head -40 /proc/1/status Name: systemd Umask: 0000 State: S (sleeping) Tgid: 1 Ngid: 0 Pid: 1 PPid: 0 TracerPid: 0 Uid: 0 0 0 0 Gid: 0 0 0 0 FDSize: 256 Groups: NStgid: 1 NSpid: 1 NSpgid: 1 NSsid: 1 VmPeak: 234192 kB <-- here VmSize: 169964 kB VmLck: 0 kB VmPin: 0 kB VmHWM: 29528 kB VmRSS: 6104 kB RssAnon: 2756 kB RssFile: 3348 kB RssShmem: 0 kB VmData: 19776 kB VmStk: 1036 kB VmExe: 784 kB VmLib: 9532 kB VmPTE: 116 kB VmSwap: 2400 kB HugetlbPages: 0 kB CoreDumping: 0 THP_enabled: 1 Threads: 1 <-- and here SigQ: 1/62808 SigPnd: 0000000000000000 ShdPnd: 0000000000000000 SigBlk: 7be3c0fe28014a03 SigIgn: 0000000000001000 And this is for kernel thread: $ head -20 /proc/2/status Name: kthreadd Umask: 0000 State: S (sleeping) Tgid: 2 Ngid: 0 Pid: 2 PPid: 0 TracerPid: 0 Uid: 0 0 0 0 Gid: 0 0 0 0 FDSize: 64 Groups: NStgid: 2 NSpid: 2 NSpgid: 0 NSsid: 0 Threads: 1 <-- here SigQ: 1/62808 SigPnd: 0000000000000000 ShdPnd: 0000000000000000 Signed-off-by:
-
Namhyung Kim authored
To save memory usage, it needs to reduce the number of entries in the proc filesystem. It's using /proc/<PID>/task directory to traverse threads in the process and then kernel creates /proc/<PID>/task/<TID> entries. After that it checks the thread info using the /proc/<TID>/status file rather than /proc/<PID>/task/<TID>/status. As far as I can see, they are the same and contain all the info we need. Using the latter eliminates the unnecessary /proc/<TID> entry. This can be useful especially a large number of threads are used in the system. In my experiment around 1KB of memory on average was saved for each thread (which is not a thread group leader). To do this, pass both pid and tid to perf_event_prepare_comm() if it knows them. In case it doesn't know, passing 0 as pid will do the old way. Signed-off-by:
-
John Garry authored
Reduce duplication in the JSONs by referencing standard events from armv8-common-and-microarch.json In general the "PublicDescription" fields are not modified when somewhat significantly worded differently than the standard. Apart from that, description and names for events slightly different to standard are changed (to standard) for consistency. Signed-off-by:
John Garry <john.garry@huawei.com> Acked-by:
Will Deacon <will@kernel.org> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Nakamura, Shunsuke/中村 俊介 <nakamura.shun@fujitsu.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linuxarm@openeuler.org Link: https://lore.kernel.org/r/1611835236-34696-5-git-send-email-john.garry@huawei.comSigned-off-by:
-
John Garry authored
Reduce duplication in the JSONs by referencing standard events from armv8-common-and-microarch.json In general the "PublicDescription" fields are not modified when somewhat significantly worded differently than the standard. Apart from that, description and names for events slightly different to standard are changed (to standard) for consistency. Note that names for events 0x34 and 0x35 are non-standard and remain unchanged. Those events came from the following originally: https://github.com/AmpereComputing/ampere-centos-kernel/blob/4c2479c67bbcf35b35224db12a092b33682b181c/Documentation/arm64/eMAG-ARM-CoreImpDefined.pdfSigned-off-by:
-
John Garry authored
Add a common and microarch JSON, which can be referenced from CPU JSONs. For now, brief and public description are as event brief event description from the ARMv8 ARM [0], D7-11. The list of events is not complete, as not all events will be referenced yet. Reference document is at the following: [0] https://documentation-service.arm.com/static/5fa3bd1eb209f547eebd4141?token=Signed-off-by:
-
John Garry authored
The "briefdescription" for event 0x35 has a typo - fix it. Fixes: d35c595b ("perf vendor events arm64: Revise core JSON events for eMAG") Signed-off-by:
-
Jin Yao authored
Other perf tool builtins already supported a DSO filter. For example: $ perf report --dsos a,b,c which only considers symbols in these dsos. Now the DSO filter is supported in 'perf script': root@kbl-ppc:~# ./perf script --dsos "[kernel.kallsyms]" perf 18123 [000] 6142863.075104: 1 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms]) perf 18123 [000] 6142863.075107: 1 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms]) perf 18123 [000] 6142863.075108: 10 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms]) perf 18123 [000] 6142863.075109: 273 cycles: ffffffff9ca7730a native_write_msr+0xa ([kernel.kallsyms]) perf 18123 [000] 6142863.075110: 7684 cycles: ffffffff9ca3c9c0 native_sched_clock+0x50 ([kernel.kallsyms]) perf 18123 [000] 6142863.075112: 213017 cycles: ffffffff9d765a92 syscall_exit_to_user_mode+0x32 ([kernel.kallsyms]) perf 18123 [001] 6142863.075156: 1 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms]) perf 18123 [001] 6142863.075158: 1 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms]) perf 18123 [001] 6142863.075159: 17 cycles: ffffffff9ca77308 native_write_msr+0x8 ([kernel.kallsyms]) Committer testing: $ perf script ls 2364888 29303.010949: 1 cycles:u: ffffffffa4bbc6a9 [unknown] ([unknown]) ls 2364888 29303.010957: 1 cycles:u: ffffffffa429ef48 [unknown] ([unknown]) ls 2364888 29303.010961: 1 cycles:u: ffffffffa4260133 [unknown] ([unknown]) ls 2364888 29303.010964: 5 cycles:u: ffffffffa429efad [unknown] ([unknown]) ls 2364888 29303.010967: 41 cycles:u: ffffffffa42a4586 [unknown] ([unknown]) ls 2364888 29303.010972: 435 cycles:u: ffffffffa429efe0 [unknown] ([unknown]) ls 2364888 29303.010978: 5142 cycles:u: 7f9b95bc2abf __GI___tunables_init+0x11f (/usr/lib64/ld-2.32.so) ls 2364888 29303.011006: 38551 cycles:u: ffffffffa4290f61 [unknown] ([unknown]) ls 2364888 29303.011486: 238234 cycles:u: 7f9b95bb7741 _dl_relocate_object+0xa71 (/usr/lib64/ld-2.32.so) ls 2364888 29303.011937: 415870 cycles:u: 7f9b95a1c80e __strcoll_l+0xe (/usr/lib64/libc-2.32.so) $ Before: $ perf script --dsos /usr/lib64/libc-2.32.so |& head -5 Error: unknown option `dsos' Usage: perf script [<options>] or: perf script [<options>] record <script> [<record-options>] <command> or: perf script [<options>] report <script> [script-args] $ After: $ perf script --dsos /usr/lib64/libc-2.32.so ls 2364888 29303.011937: 415870 cycles:u: 7f9b95a1c80e __strcoll_l+0xe (/usr/lib64/libc-2.32.so) $ Signed-off-by:Jin Yao <yao.jin@linux.intel.com> Acked-by:
Jiri Olsa <jolsa@kernel.org> Tested-by:
-
Arnaldo Carvalho de Melo authored
When we lookup an address and don't find a map we should filter that sample if the user specified a list of --dso entries to filter on, fix it. Before: $ perf script sleep 274800 2843.556162: 1 cycles:u: ffffffffbb26bff4 [unknown] ([unknown]) sleep 274800 2843.556168: 1 cycles:u: ffffffffbb2b047d [unknown] ([unknown]) sleep 274800 2843.556171: 1 cycles:u: ffffffffbb2706b2 [unknown] ([unknown]) sleep 274800 2843.556174: 6 cycles:u: ffffffffbb2b0267 [unknown] ([unknown]) sleep 274800 2843.556176: 59 cycles:u: ffffffffbb2b03b1 [unknown] ([unknown]) sleep 274800 2843.556180: 691 cycles:u: ffffffffbb26bff4 [unknown] ([unknown]) sleep 274800 2843.556189: 9160 cycles:u: 7fa9550eeaa3 __GI___tunables_init+0xf3 (/usr/lib64/ld-2.32.so) sleep 274800 2843.556312: 86937 cycles:u: 7fa9550e157b _dl_lookup_symbol_x+0x4b (/usr/lib64/ld-2.32.so) $ So we have some samples we somehow didn't find in a map for, if we now do: $ perf report --stdio --dso /usr/lib64/ld-2.32.so # dso: /usr/lib64/ld-2.32.so # # Total Lost Samples: 0 # # Samples: 8 of event 'cycles:u' # Event count (approx.): 96856 # # Overhead Command Symbol # ........ ....... ........................ # 89.76% sleep [.] _dl_lookup_symbol_x 9.46% sleep [.] __GI___tunables_init 0.71% sleep [k] 0xffffffffbb26bff4 0.06% sleep [k] 0xffffffffbb2b03b1 0.01% sleep [k] 0xffffffffbb2b0267 0.00% sleep [k] 0xffffffffbb2706b2 0.00% sleep [k] 0xffffffffbb2b047d $ After this patch we get the right output with just entries for the DSOs specified in --dso: $ perf report --stdio --dso /usr/lib64/ld-2.32.so # dso: /usr/lib64/ld-2.32.so # # Total Lost Samples: 0 # # Samples: 8 of event 'cycles:u' # Event count (approx.): 96856 # # Overhead Command Symbol # ........ ....... ........................ # 89.76% sleep [.] _dl_lookup_symbol_x 9.46% sleep [.] __GI___tunables_init $ # Fixes: 96415e4d ("perf symbols: Avoid unnecessary symbol loading when dso list is specified") Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kan Liang <kan.liang@intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20210128131209.GD775562@kernel.orgSigned-off-by: -
Kan Liang authored
The Topdown Microarchitecture Analysis (TMA) Method is a structured analysis methodology to identify critical performance bottlenecks in out-of-order processors. From the Ice Lake and later platforms, the Topdown information can be retrieved from the dedicated "metrics" register, which isn't impacted by other events. Also, the Topdown metrics support both per thread/process and per core measuring. Adding Topdown metrics events as default events can enrich the default measuring information, and would not cost any extra multiplexing. Introduce arch_evlist__add_default_attrs() to allow architecture specific default events. Add the Topdown metrics events in the X86 specific arch_evlist__add_default_attrs(). Other architectures can add their own default events later separately. With the patch: $ perf stat sleep 1 Performance counter stats for 'sleep 1': 0.82 msec task-clock:u # 0.001 CPUs utilized 0 context-switches:u # 0.000 K/sec 0 cpu-migrations:u # 0.000 K/sec 61 page-faults:u # 0.074 M/sec 319,941 cycles:u # 0.388 GHz 242,802 instructions:u # 0.76 insn per cycle 54,380 branches:u # 66.028 M/sec 4,043 branch-misses:u # 7.43% of all branches 1,585,555 slots:u # 1925.189 M/sec 238,941 topdown-retiring:u # 15.0% retiring 410,378 topdown-bad-spec:u # 25.8% bad speculation 634,222 topdown-fe-bound:u # 39.9% frontend bound 304,675 topdown-be-bound:u # 19.2% backend bound 1.001791625 seconds time elapsed 0.000000000 seconds user 0.001572000 seconds sys Signed-off-by:Kan Liang <kan.liang@linux.intel.com> Tested-by:
-
John Garry authored
Event duration_time in a metric expression requires special handling. Improve test coverage by including a metric whose expression includes duration_time. The actual metric is a copied from the L1D_Cache_Fill_BW metric on my broadwell machine. Signed-off-by:
Ian Rogers <irogers@google.com> Acked-by:
-
- 27 Jan, 2021 2 commits
-
-
Arnaldo Carvalho de Melo authored
To pick up fixes. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linuxLinus Torvalds authored
Pull parisc fixes from Helge Deller: "Two small fixes: - Fix linking error with 64-bit kernel when modules are disabled, reported by kernel test robot - Remove leftover reference to power_tasklet, by Davidlohr Bueso" * 'parisc-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Enable -mlong-calls gcc option by default when !CONFIG_MODULES parisc: Remove leftover reference to the power_tasklet
-
- 26 Jan, 2021 7 commits
-
-
Ævar Arnfjörð Bjarmason authored
Remove the magical "repo-abbrev" comment added when this file was introduced in e0ab1ec9 ([PATCH] add .mailmap for proper git-shortlog output, 2007-02-14). It's been an undocumented feature of git-shortlog(1), originally added to git for Linus's use. Since then he's no longer using it[1], and I've removed the feature in git.git's 4e168333a87 (shortlog: remove unused(?) "repo-abbrev" feature, 2021-01-12). It's on the "master" branch, but not yet in a release version. Let's also remove it from linux.git, both as a heads-up to any potential users of it in linux.git whose use would be broken sooner than later by git itself, and because it'll eventually be entirely redundant. 1. https://lore.kernel.org/git/CAHk-=wixHyBKZVUcxq+NCWMbkrX0xnppb7UCopRWw1+oExYpYw@mail.gmail.com/Acked-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Ævar Arnfjörð Bjarmason <avarab@gmail.com> Signed-off-by:
-
Helge Deller authored
When building a kernel without module support, the CONFIG_MLONGCALL option needs to be enabled in order to reach symbols which are outside of a 22-bit branch. This patch changes the autodetection in the Kconfig script to always enable CONFIG_MLONGCALL when modules are disabled and uses a far call to preempt_schedule_irq() in intr_do_preempt() to reach the symbol in all cases. Signed-off-by:
Helge Deller <deller@gmx.de> Reported-by:
kernel test robot <lkp@intel.com> Cc: stable@vger.kernel.org # v5.6+
-
git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds authored
Pull kvm fixes from Paolo Bonzini: - x86 bugfixes - Documentation fixes - Avoid performance regression due to SEV-ES patches - ARM: - Don't allow tagged pointers to point to memslots - Filter out ARMv8.1+ PMU events on v8.0 hardware - Hide PMU registers from userspace when no PMU is configured - More PMU cleanups - Don't try to handle broken PSCI firmware - More sys_reg() to reg_to_encoding() conversions * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: x86: allow KVM_REQ_GET_NESTED_STATE_PAGES outside guest mode for VMX KVM: x86: Revert "KVM: x86: Mark GPRs dirty when written" KVM: SVM: Unconditionally sync GPRs to GHCB on VMRUN of SEV-ES guest KVM: nVMX: Sync unsync'd vmcs02 state to vmcs12 on migration kvm: tracing: Fix unmatched kvm_entry and kvm_exit events KVM: Documentation: Update description of KVM_{GET,CLEAR}_DIRTY_LOG KVM: x86: get smi pending status correctly KVM: x86/pmu: Fix HW_REF_CPU_CYCLES event pseudo-encoding in intel_arch_events[] KVM: x86/pmu: Fix UBSAN shift-out-of-bounds warning in intel_pmu_refresh() KVM: x86: Add more protection against undefined behavior in rsvd_bits() KVM: Documentation: Fix spec for KVM_CAP_ENABLE_CAP_VM KVM: Forbid the use of tagged userspace addresses for memslots KVM: arm64: Filter out v8.1+ events on v8.0 HW KVM: arm64: Compute TPIDR_EL2 ignoring MTE tag KVM: arm64: Use the reg_to_encoding() macro instead of sys_reg() KVM: arm64: Allow PSCI SYSTEM_OFF/RESET to return KVM: arm64: Simplify handling of absent PMU system registers KVM: arm64: Hide PMU registers from userspace when not available -
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spiLinus Torvalds authored
Pull spi fixes from Mark Brown: "One new device ID here, plus an error handling fix - nothing remarkable in either" * tag 'spi-fix-v5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spidev: Add cisco device compatible spi: altera: Fix memory leak on error path
-
Linus Torvalds authored
Merge tag 'regulator-fix-v5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "The main thing here is a change to make sure that we don't try to double resolve the supply of a regulator if we have two probes going on simultaneously, plus an incremental fix on top of that to resolve a lockdep issue it introduced. There's also a patch from Dmitry Osipenko adding stubs for some functions to avoid build issues in consumers in some configurations" * tag 'regulator-fix-v5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: Fix lockdep warning resolving supplies regulator: consumer: Add missing stubs to regulator/consumer.h regulator: core: avoid regulator_resolve_supply() race condition
-
Davidlohr Bueso authored
This was removed long ago, back in: 6e16d940 ([PARISC] Convert soft power switch driver to kthread) Signed-off-by:Davidlohr Bueso <dbueso@suse.de> Signed-off-by:
-
Linus Torvalds authored
This reverts commit d3921cb8. Chris Wilson reports that it causes boot problems: "We have half a dozen or so different machines in CI that are silently failing to boot, that we believe is bisected to this patch" and the CI team confirmed that a revert fixed the issues. The cause is unknown for now, so let's revert it. Link: https://lore.kernel.org/lkml/161160687463.28991.354987542182281928@build.alporthouse.com/Reported-and-tested-by:
Chris Wilson <chris@chris-wilson.co.uk> Acked-by:
Mike Rapoport <rppt@linux.ibm.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
- 25 Jan, 2021 20 commits
-
-
Paolo Bonzini authored
VMX also uses KVM_REQ_GET_NESTED_STATE_PAGES for the Hyper-V eVMCS, which may need to be loaded outside guest mode. Therefore we cannot WARN in that case. However, that part of nested_get_vmcs12_pages is _not_ needed at vmentry time. Split it out of KVM_REQ_GET_NESTED_STATE_PAGES handling, so that both vmentry and migration (and in the latter case, independent of is_guest_mode) do the parts that are needed. Cc: <stable@vger.kernel.org> # 5.10.x: f2c7ef3b: KVM: nSVM: cancel KVM_REQ_GET_NESTED_STATE_PAGES Cc: <stable@vger.kernel.org> # 5.10.x Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
Revert the dirty/available tracking of GPRs now that KVM copies the GPRs to the GHCB on any post-VMGEXIT VMRUN, even if a GPR is not dirty. Per commit de3cd117 ("KVM: x86: Omit caching logic for always-available GPRs"), tracking for GPRs noticeably impacts KVM's code footprint. This reverts commit 1c04d8c9. Signed-off-by:
Sean Christopherson <seanjc@google.com> Message-Id: <20210122235049.3107620-3-seanjc@google.com> Signed-off-by:
-
Sean Christopherson authored
Drop the per-GPR dirty checks when synchronizing GPRs to the GHCB, the GRPs' dirty bits are set from time zero and never cleared, i.e. will always be seen as dirty. The obvious alternative would be to clear the dirty bits when appropriate, but removing the dirty checks is desirable as it allows reverting GPR dirty+available tracking, which adds overhead to all flavors of x86 VMs. Note, unconditionally writing the GPRs in the GHCB is tacitly allowed by the GHCB spec, which allows the hypervisor (or guest) to provide unnecessary info; it's the guest's responsibility to consume only what it needs (the hypervisor is untrusted after all). The guest and hypervisor can supply additional state if desired but must not rely on that additional state being provided. Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Fixes: 291bd20d ("KVM: SVM: Add initial support for a VMGEXIT VMEXIT") Signed-off-by:
-
Maxim Levitsky authored
Even when we are outside the nested guest, some vmcs02 fields may not be in sync vs vmcs12. This is intentional, even across nested VM-exit, because the sync can be delayed until the nested hypervisor performs a VMCLEAR or a VMREAD/VMWRITE that affects those rarely accessed fields. However, during KVM_GET_NESTED_STATE, the vmcs12 has to be up to date to be able to restore it. To fix that, call copy_vmcs02_to_vmcs12_rare() before the vmcs12 contents are copied to userspace. Fixes: 7952d769 ("KVM: nVMX: Sync rarely accessed guest fields only when needed") Reviewed-by:
Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20210114205449.8715-2-mlevitsk@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Lorenzo Brescia authored
On VMX, if we exit and then re-enter immediately without leaving the vmx_vcpu_run() function, the kvm_entry event is not logged. That means we will see one (or more) kvm_exit, without its (their) corresponding kvm_entry, as shown here: CPU-1979 [002] 89.871187: kvm_entry: vcpu 1 CPU-1979 [002] 89.871218: kvm_exit: reason MSR_WRITE CPU-1979 [002] 89.871259: kvm_exit: reason MSR_WRITE It also seems possible for a kvm_entry event to be logged, but then we leave vmx_vcpu_run() right away (if vmx->emulation_required is true). In this case, we will have a spurious kvm_entry event in the trace. Fix these situations by moving trace_kvm_entry() inside vmx_vcpu_run() (where trace_kvm_exit() already is). A trace obtained with this patch applied looks like this: CPU-14295 [000] 8388.395387: kvm_entry: vcpu 0 CPU-14295 [000] 8388.395392: kvm_exit: reason MSR_WRITE CPU-14295 [000] 8388.395393: kvm_entry: vcpu 0 CPU-14295 [000] 8388.395503: kvm_exit: reason EXTERNAL_INTERRUPT Of course, not calling trace_kvm_entry() in common x86 code any longer means that we need to adjust the SVM side of things too. Signed-off-by:
Lorenzo Brescia <lorenzo.brescia@edu.unito.it> Signed-off-by:
Dario Faggioli <dfaggioli@suse.com> Message-Id: <160873470698.11652.13483635328769030605.stgit@Wayrath> Signed-off-by:
-
Zenghui Yu authored
Update various words, including the wrong parameter name and the vague description of the usage of "slot" field. Signed-off-by:
Zenghui Yu <yuzenghui@huawei.com> Message-Id: <20201208043439.895-1-yuzenghui@huawei.com> Signed-off-by:
-
Jay Zhou authored
The injection process of smi has two steps: Qemu KVM Step1: cpu->interrupt_request &= \ ~CPU_INTERRUPT_SMI; kvm_vcpu_ioctl(cpu, KVM_SMI) call kvm_vcpu_ioctl_smi() and kvm_make_request(KVM_REQ_SMI, vcpu); Step2: kvm_vcpu_ioctl(cpu, KVM_RUN, 0) call process_smi() if kvm_check_request(KVM_REQ_SMI, vcpu) is true, mark vcpu->arch.smi_pending = true; The vcpu->arch.smi_pending will be set true in step2, unfortunately if vcpu paused between step1 and step2, the kvm_run->immediate_exit will be set and vcpu has to exit to Qemu immediately during step2 before mark vcpu->arch.smi_pending true. During VM migration, Qemu will get the smi pending status from KVM using KVM_GET_VCPU_EVENTS ioctl at the downtime, then the smi pending status will be lost. Signed-off-by:Jay Zhou <jianjay.zhou@huawei.com> Signed-off-by:
Shengen Zhuang <zhuangshengen@huawei.com> Message-Id: <20210118084720.1585-1-jianjay.zhou@huawei.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Like Xu authored
The HW_REF_CPU_CYCLES event on the fixed counter 2 is pseudo-encoded as 0x0300 in the intel_perfmon_event_map[]. Correct its usage. Fixes: 62079d8a ("KVM: PMU: add proper support for fixed counter 2") Signed-off-by:
Like Xu <like.xu@linux.intel.com> Message-Id: <20201230081916.63417-1-like.xu@linux.intel.com> Reviewed-by:
-
Like Xu authored
Since we know vPMU will not work properly when (1) the guest bit_width(s) of the [gp|fixed] counters are greater than the host ones, or (2) guest requested architectural events exceeds the range supported by the host, so we can setup a smaller left shift value and refresh the guest cpuid entry, thus fixing the following UBSAN shift-out-of-bounds warning: shift exponent 197 is too large for 64-bit type 'long long unsigned int' Call Trace: __dump_stack lib/dump_stack.c:79 [inline] dump_stack+0x107/0x163 lib/dump_stack.c:120 ubsan_epilogue+0xb/0x5a lib/ubsan.c:148 __ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:395 intel_pmu_refresh.cold+0x75/0x99 arch/x86/kvm/vmx/pmu_intel.c:348 kvm_vcpu_after_set_cpuid+0x65a/0xf80 arch/x86/kvm/cpuid.c:177 kvm_vcpu_ioctl_set_cpuid2+0x160/0x440 arch/x86/kvm/cpuid.c:308 kvm_arch_vcpu_ioctl+0x11b6/0x2d70 arch/x86/kvm/x86.c:4709 kvm_vcpu_ioctl+0x7b9/0xdb0 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3386 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:739 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Reported-by: syzbot+ae488dc136a4cc6ba32b@syzkaller.appspotmail.com Signed-off-by:
-
Sean Christopherson authored
Add compile-time asserts in rsvd_bits() to guard against KVM passing in garbage hardcoded values, and cap the upper bound at '63' for dynamic values to prevent generating a mask that would overflow a u64. Suggested-by:
-
Quentin Perret authored
The documentation classifies KVM_ENABLE_CAP with KVM_CAP_ENABLE_CAP_VM as a vcpu ioctl, which is incorrect. Fix it by specifying it as a VM ioctl. Fixes: e5d83c74 ("kvm: make KVM_CAP_ENABLE_CAP_VM architecture agnostic") Signed-off-by:
Quentin Perret <qperret@google.com> Message-Id: <20210108165349.747359-1-qperret@google.com> Signed-off-by:
-
Paolo Bonzini authored
Merge tag 'kvmarm-fixes-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 5.11, take #2 - Don't allow tagged pointers to point to memslots - Filter out ARMv8.1+ PMU events on v8.0 hardware - Hide PMU registers from userspace when no PMU is configured - More PMU cleanups - Don't try to handle broken PSCI firmware - More sys_reg() to reg_to_encoding() conversions
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fix from Herbert Xu: "Fix a regression in the cesa driver" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: marvel/cesa - Fix tdma descriptor on 64-bit
-
Johannes Berg authored
After commit 36e2c742 ("fs: don't allow splice read/write without explicit ops") sendfile() could no longer send data from a real file to a pipe, breaking for example certain cgit setups (e.g. when running behind fcgiwrap), because in this case cgit will try to do exactly this: sendfile() to a pipe. Fix this by using iter_file_splice_write for the splice_write method of pipes, as suggested by Christoph. Cc: stable@vger.kernel.org Fixes: 36e2c742 ("fs: don't allow splice read/write without explicit ops") Suggested-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Johannes Berg <johannes@sipsolutions.net> Signed-off-by:
-
Sami Tolvanen authored
layer to use write_iter. Fix the redirected_tty_write declaration also in n_tty and change the comparisons to use write_iter instead of write. [ Also moved the declaration of redirected_tty_write() to the proper location in a header file. The reason for the bug was the bogus extern declaration in n_tty.c silently not matching the changed definition in tty_io.c, and because it wasn't in a shared header file, there was no cross-checking of the declaration. Sami noticed because Clang's Control Flow Integrity checking ended up incidentally noticing the inconsistent declaration. - Linus ] Fixes: 9bb48c82 ("tty: implement write_iter") Signed-off-by:
Sami Tolvanen <samitolvanen@google.com> Signed-off-by:
-
Linus Torvalds authored
Merge tag 'printk-for-5.11-urgent-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk fix from Petr Mladek: "The fix of a potential buffer overflow in 5.11-rc5 introduced another one. The trailing '\0' might be written up to the message "len" past the buffer. Fortunately, it is not that easy to hit. Most readers use 1kB buffers for a single message. Typical messages fit into the temporary buffer with enough reserve. Also readers do not rely on the '\0'. It is related to the previous fix. Some readers required the space for the trailing '\0'. We decided to write it there to avoid such regressions in the future. The most realistic victims are dumpers using kmsg_dump_get_buffer(). They are filling the entire buffer with as many messages as possible. They are typically used when handling panic()" * tag 'printk-for-5.11-urgent-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printk: fix string termination for record_print_text()
-
Petr Mladek authored
-
Daniel Walker authored
Add compatible string for Cisco device present on the Cisco Petra platform. Signed-off-by:
Daniel Walker <danielwa@cisco.com> Cc: xe-linux-external@cisco.com Link: https://lore.kernel.org/r/20210121231237.30664-2-danielwa@cisco.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
John Ogness authored
Commit f0e386ee ("printk: fix buffer overflow potential for print_text()") added string termination in record_print_text(). However it used the wrong base pointer for adding the terminator. This led to a 0-byte being written somewhere beyond the buffer. Use the correct base pointer when adding the terminator. Fixes: f0e386ee ("printk: fix buffer overflow potential for print_text()") Reported-by:
Sven Schnelle <svens@linux.ibm.com> Signed-off-by:
John Ogness <john.ogness@linutronix.de> Signed-off-by:
Petr Mladek <pmladek@suse.com> Link: https://lore.kernel.org/r/20210124202728.4718-1-john.ogness@linutronix.de
-
Linus Torvalds authored
-
