- 22 Jul, 2021 1 commit
-
-
Maxime Ripard authored
The corpro,gm7123 was in use in a DT but was never properly documented, let's add it. Cc: dri-devel@lists.freedesktop.org Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Maxime Ripard <maxime@cerno.tech> Acked-by:
Sam Ravnborg <sam@ravnborg.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210721140424.725744-12-maxime@cerno.tech
-
- 21 Jul, 2021 11 commits
-
-
Zheyu Ma authored
The userspace program could pass any values to the driver through ioctl() interface. If the driver doesn't check the value of 'pixclock', it may cause divide error because of the 'PICOS2KHZ' macro. Fix this by checking whether 'pixclock' is zero first. The following log reveals it: [ 53.093806] divide error: 0000 [#1] PREEMPT SMP KASAN PTI [ 53.093838] CPU: 3 PID: 11763 Comm: hang Not tainted 5.14.0-rc2-00478-g2734d6c1 #215 [ 53.093859] RIP: 0010:neofb_check_var+0x80/0xe50 [ 53.093951] Call Trace: [ 53.093956] ? neofb_setcolreg+0x2b0/0x2b0 [ 53.093968] fb_set_var+0x2e4/0xeb0 [ 53.093977] ? fb_blank+0x1a0/0x1a0 [ 53.093984] ? lock_acquire+0x1ef/0x530 [ 53.093996] ? lock_release+0x810/0x810 [ 53.094005] ? lock_is_held_type+0x100/0x140 [ 53.094016] ? ___might_sleep+0x1ee/0x2d0 [ 53.094028] ? __mutex_lock+0x620/0x1190 [ 53.094036] ? do_fb_ioctl+0x313/0x700 [ 53.094044] ? mutex_lock_io_nested+0xfa0/0xfa0 [ 53.094051] ? __this_cpu_preempt_check+0x1d/0x30 [ 53.094060] ? _raw_spin_unlock_irqrestore+0x46/0x60 [ 53.094069] ? lockdep_hardirqs_on+0x59/0x100 [ 53.094076] ? _raw_spin_unlock_irqrestore+0x46/0x60 [ 53.094085] ? trace_hardirqs_on+0x6a/0x1c0 [ 53.094096] do_fb_ioctl+0x31e/0x700 Signed-off-by:
Zheyu Ma <zheyuma97@gmail.com> Signed-off-by:
-
Colin Ian King authored
The variable err is being initialized with a value that is never read, the assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by:Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Javier Martinez Canillas authored
The register_gop_device() function registers an "efi-framebuffer" platform device to match against the efifb driver, to have an early framebuffer for EFI platforms. But there is already support to do exactly the same by the Generic System Framebuffers (sysfb) driver. This used to be only for X86 but it has been moved to drivers/firmware and could be reused by other architectures. Also, besides supporting registering an "efi-framebuffer", this driver can register a "simple-framebuffer" allowing to use the siple{fb,drm} drivers on non-X86 EFI platforms. For example, on aarch64 these drivers can only be used with DT and doesn't have code to register a "simple-frambuffer" platform device when booting with EFI. For these reasons, let's remove the register_gop_device() duplicated code and instead move the platform specific logic that's there to sysfb driver. Signed-off-by:Javier Martinez Canillas <javierm@redhat.com> Acked-by:
Borislav Petkov <bp@suse.de> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210625131359.1804394-1-javierm@redhat.com
-
Javier Martinez Canillas authored
The x86 architecture has generic support to register a system framebuffer platform device. It either registers a "simple-framebuffer" if the config option CONFIG_X86_SYSFB is enabled, or a legacy VGA/VBE/EFI FB device. But the code is generic enough to be reused by other architectures and can be moved out of the arch/x86 directory. This will allow to also support the simple{fb,drm} drivers on non-x86 EFI platforms, such as aarch64 where these drivers are only supported with DT. Signed-off-by:Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by:
-
Christoph Hellwig authored
The VGA arbitration is entirely based on pci_dev structures, so just pass that back to the set_vga_decode callback. Signed-off-by:
Christoph Hellwig <hch@lst.de> Link: https://patchwork.freedesktop.org/patch/msgid/20210716061634.2446357-8-hch@lst.deAcked-by:
Christian König <christian.koenig@amd.com> Signed-off-by:
-
Christoph Hellwig authored
All callers pass NULL as the irq_set_state argument, so remove it and the ->irq_set_state member in struct vga_device. Signed-off-by:
-
Christoph Hellwig authored
Add a trivial wrapper for the unregister case that sets all fields to NULL. Signed-off-by:
-
Christoph Hellwig authored
Merge the different CONFIG_VGA_ARB ifdef blocks, remove superflous externs, and regularize the stubs for !CONFIG_VGA_ARB. Signed-off-by:
-
Christoph Hellwig authored
Kerneldoc comments should be at the implementation side, not in the header just declaring the prototype. Signed-off-by:
-
Christoph Hellwig authored
vga_conflicts only has a single caller and none of the arch overrides mentioned in the comment. Just remove it and the thus dead check in the caller. Signed-off-by:
-
Christoph Hellwig authored
The define is entirely unused. Signed-off-by:
-
- 20 Jul, 2021 12 commits
-
-
Juan A. Suarez Romero authored
The V3D engine has several hardware performance counters that can of interest for userspace performance analysis tools. This exposes new ioctls to create and destroy performance monitor objects, as well as to query the counter values. Each created performance monitor object has an ID that can be attached to CL/CSD submissions, so the driver enables the requested counters when the job is submitted, and updates the performance monitor values when the job is done. It is up to the user to ensure all the jobs have been finished before getting the performance monitor values. It is also up to the user to properly synchronize BCL jobs when submitting jobs with different performance monitors attached. Cc: Daniel Vetter <daniel@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: Emma Anholt <emma@anholt.net> To: dri-devel@lists.freedesktop.org Signed-off-by:
Juan A. Suarez Romero <jasuarez@igalia.com> Acked-by:
Melissa Wen <mwen@igalia.com> Signed-off-by:
Melissa Wen <melissa.srw@gmail.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210608111541.461991-1-jasuarez@igalia.com
-
Desmond Cheong Zhi Xi authored
drm_file->master pointers should be protected by drm_device.master_mutex or drm_file.master_lookup_lock when being dereferenced. However, in drm_lease.c, there are multiple instances where drm_file->master is accessed and dereferenced while neither lock is held. This makes drm_lease.c vulnerable to use-after-free bugs. We address this issue in 2 ways: 1. Add a new drm_file_get_master() function that calls drm_master_get on drm_file->master while holding on to drm_file.master_lookup_lock. Since drm_master_get increments the reference count of master, this prevents master from being freed until we unreference it with drm_master_put. 2. In each case where drm_file->master is directly accessed and eventually dereferenced in drm_lease.c, we wrap the access in a call to the new drm_file_get_master function, then unreference the master pointer once we are done using it. Reported-by:
Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com> Reviewed-by:
Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by:
-
Desmond Cheong Zhi Xi authored
Currently, drm_file.master pointers should be protected by drm_device.master_mutex when being dereferenced. This is because drm_file.master is not invariant for the lifetime of drm_file. If drm_file is not the creator of master, then drm_file.is_master is false, and a call to drm_setmaster_ioctl will invoke drm_new_set_master, which then allocates a new master for drm_file and puts the old master. Thus, without holding drm_device.master_mutex, the old value of drm_file.master could be freed while it is being used by another concurrent process. However, it is not always possible to lock drm_device.master_mutex to dereference drm_file.master. Through the fbdev emulation code, this might occur in a deep nest of other locks. But drm_device.master_mutex is also the outermost lock in the nesting hierarchy, so this leads to potential deadlocks. To address this, we introduce a new spin lock at the bottom of the lock hierarchy that only serializes drm_file.master. With this change, the value of drm_file.master changes only when both drm_device.master_mutex and drm_file.master_lookup_lock are held. Hence, any process holding either of those locks can ensure that the value of drm_file.master will not change concurrently. Since no lock depends on the new drm_file.master_lookup_lock, when drm_file.master is dereferenced, but drm_device.master_mutex cannot be held, we can safely protect the master pointer with drm_file.master_lookup_lock. Reported-by:
-
Desmond Cheong Zhi Xi authored
While checking the master status of the DRM file in drm_is_current_master(), the device's master mutex should be held. Without the mutex, the pointer fpriv->master may be freed concurrently by another process calling drm_setmaster_ioctl(). This could lead to use-after-free errors when the pointer is subsequently dereferenced in drm_lease_owner(). The callers of drm_is_current_master() from drm_auth.c hold the device's master mutex, but external callers do not. Hence, we implement drm_is_current_master_locked() to be used within drm_auth.c, and modify drm_is_current_master() to grab the device's master mutex before checking the master status. Reported-by:
-
Desmond Cheong Zhi Xi authored
Inside drm_clients_info, the rcu_read_lock is held to lock pid_task()->comm. However, within this protected section, a call to drm_is_current_master is made, which involves a mutex lock in a future patch. However, this is illegal because the mutex lock might block while in the RCU read-side critical section. Since drm_is_current_master isn't protected by rcu_read_lock, we avoid this by moving it out of the RCU critical section. The following report came from intel-gfx ci's igt@debugfs_test@read_all_entries testcase: ============================= [ BUG: Invalid wait context ] 5.13.0-CI-Patchwork_20515+ #1 Tainted: G W ----------------------------- debugfs_test/1101 is trying to lock: ffff888132d901a8 (&dev->master_mutex){+.+.}-{3:3}, at: drm_is_current_master+0x1e/0x50 other info that might help us debug this: context-{4:4} 3 locks held by debugfs_test/1101: #0: ffff88810fdffc90 (&p->lock){+.+.}-{3:3}, at: seq_read_iter+0x53/0x3b0 #1: ffff888132d90240 (&dev->filelist_mutex){+.+.}-{3:3}, at: drm_clients_info+0x63/0x2a0 #2: ffffffff82734220 (rcu_read_lock){....}-{1:2}, at: drm_clients_info+0x1b1/0x2a0 stack backtrace: CPU: 8 PID: 1101 Comm: debugfs_test Tainted: G W 5.13.0-CI-Patchwork_20515+ #1 Hardware name: Intel Corporation CometLake Client Platform/CometLake S UDIMM (ERB/CRB), BIOS CMLSFWR1.R00.1263.D00.1906260926 06/26/2019 Call Trace: dump_stack+0x7f/0xad __lock_acquire.cold.78+0x2af/0x2ca lock_acquire+0xd3/0x300 ? drm_is_current_master+0x1e/0x50 ? __mutex_lock+0x76/0x970 ? lockdep_hardirqs_on+0xbf/0x130 __mutex_lock+0xab/0x970 ? drm_is_current_master+0x1e/0x50 ? drm_is_current_master+0x1e/0x50 ? drm_is_current_master+0x1e/0x50 drm_is_current_master+0x1e/0x50 drm_clients_info+0x107/0x2a0 seq_read_iter+0x178/0x3b0 seq_read+0x104/0x150 full_proxy_read+0x4e/0x80 vfs_read+0xa5/0x1b0 ksys_read+0x5a/0xd0 do_syscall_64+0x39/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae Signed-off-by: -
Desmond Cheong Zhi Xi authored
In preparation for a future patch to take a lock on drm_device.master_mutex inside drm_is_current_master(), we first move the call to drm_is_current_master() in drm_mode_getconnector out from the section locked by &dev->mode_config.mutex. This avoids creating a circular lock dependency. Failing to avoid this lock dependency produces the following lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 5.13.0-rc7-CI-CI_DRM_10254+ #1 Not tainted ------------------------------------------------------ kms_frontbuffer/1087 is trying to acquire lock: ffff88810dcd01a8 (&dev->master_mutex){+.+.}-{3:3}, at: drm_is_current_master+0x1b/0x40 but task is already holding lock: ffff88810dcd0488 (&dev->mode_config.mutex){+.+.}-{3:3}, at: drm_mode_getconnector+0x1c6/0x4a0 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&dev->mode_config.mutex){+.+.}-{3:3}: __mutex_lock+0xab/0x970 drm_client_modeset_probe+0x22e/0xca0 __drm_fb_helper_initial_config_and_unlock+0x42/0x540 intel_fbdev_initial_config+0xf/0x20 [i915] async_run_entry_fn+0x28/0x130 process_one_work+0x26d/0x5c0 worker_thread+0x37/0x380 kthread+0x144/0x170 ret_from_fork+0x1f/0x30 -> #1 (&client->modeset_mutex){+.+.}-{3:3}: __mutex_lock+0xab/0x970 drm_client_modeset_commit_locked+0x1c/0x180 drm_client_modeset_commit+0x1c/0x40 __drm_fb_helper_restore_fbdev_mode_unlocked+0x88/0xb0 drm_fb_helper_set_par+0x34/0x40 intel_fbdev_set_par+0x11/0x40 [i915] fbcon_init+0x270/0x4f0 visual_init+0xc6/0x130 do_bind_con_driver+0x1e5/0x2d0 do_take_over_console+0x10e/0x180 do_fbcon_takeover+0x53/0xb0 register_framebuffer+0x22d/0x310 __drm_fb_helper_initial_config_and_unlock+0x36c/0x540 intel_fbdev_initial_config+0xf/0x20 [i915] async_run_entry_fn+0x28/0x130 process_one_work+0x26d/0x5c0 worker_thread+0x37/0x380 kthread+0x144/0x170 ret_from_fork+0x1f/0x30 -> #0 (&dev->master_mutex){+.+.}-{3:3}: __lock_acquire+0x151e/0x2590 lock_acquire+0xd1/0x3d0 __mutex_lock+0xab/0x970 drm_is_current_master+0x1b/0x40 drm_mode_getconnector+0x37e/0x4a0 drm_ioctl_kernel+0xa8/0xf0 drm_ioctl+0x1e8/0x390 __x64_sys_ioctl+0x6a/0xa0 do_syscall_64+0x39/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae other info that might help us debug this: Chain exists of: &dev->master_mutex --> &client->modeset_mutex --> &dev->mode_config.mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&dev->mode_config.mutex); lock(&client->modeset_mutex); lock(&dev->mode_config.mutex); lock(&dev->master_mutex); *** DEADLOCK *** 1 lock held by kms_frontbuffer/1087: #0: ffff88810dcd0488 (&dev->mode_config.mutex){+.+.}-{3:3}, at: drm_mode_getconnector+0x1c6/0x4a0 stack backtrace: CPU: 7 PID: 1087 Comm: kms_frontbuffer Not tainted 5.13.0-rc7-CI-CI_DRM_10254+ #1 Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP TLC, BIOS ICLSFWR1.R00.3234.A01.1906141750 06/14/2019 Call Trace: dump_stack+0x7f/0xad check_noncircular+0x12e/0x150 __lock_acquire+0x151e/0x2590 lock_acquire+0xd1/0x3d0 __mutex_lock+0xab/0x970 drm_is_current_master+0x1b/0x40 drm_mode_getconnector+0x37e/0x4a0 drm_ioctl_kernel+0xa8/0xf0 drm_ioctl+0x1e8/0x390 __x64_sys_ioctl+0x6a/0xa0 do_syscall_64+0x39/0xb0 entry_SYSCALL_64_after_hwframe+0x44/0xae Reported-by: -
Jim Cromie authored
s/prink/printk/ - no functional changes Signed-off-by:
Jim Cromie <jim.cromie@gmail.com> Signed-off-by:
-
Guangming Cao authored
Dmabuf sysfs stat is used for dmabuf info track. But these file maybe still in use after buffer released, should clear it before buffer release. Signed-off-by:
Guangming Cao <Guangming.Cao@mediatek.com> Reviewed-by:
-
Yang Yingliang authored
Replace pci_enable_device() with pcim_enable_device(), pci_disable_device() will be called in release automatically. v3: reformat commit message update for move to tiny/ v2: use pcim_enable_device() Signed-off-by:
Yang Yingliang <yangyingliang@huawei.com> Reported-by:
Hulk Robot <hulkci@huawei.com> Acked-by:
-
KuoHsiang Chou authored
[Bug][AST2500] V1: When AST2500 acts as stand-alone VGA so that DRAM and DVO initialization have to be achieved by VGA driver with P2A (PCI to AHB) enabling. However, HW suggests disable Fast reset mode after DRAM initializaton, because fast reset mode is mainly designed for ARM ICE debugger. Once Fast reset is checked as enabling, WDT (Watch Dog Timer) should be first enabled to avoid system deadlock before disable fast reset mode. V2: Use to_pci_dev() to get revision of PCI configuration. V3: If SCU00 is not unlocked, just enter its password again. It is unnecessary to clear AHB lock condition and restore WDT default setting again, before Fast-reset clearing. V4: repatch after "error : could not build fake ancestor" resolved. V5: Since CVE_2019_6260 item3, Most of AST2500 have disabled P2A(PCIe to AMBA). However, for backward compatibility, some patches about P2A, such as items of v5.2 and v5.3, are considered to be upstreamed with comments. 1. Add define macro to improve source readability. ast_drv.h, ast_main.c, ast_post.c 2. Add comment about "Fast restet" is enabled for ARM-ICE debugger ast_post.c 3. Add comment about Reset USB port to patch USB unknown device issue ast_post.c Signed-off-by:
KuoHsiang Chou <kuohsiang_chou@aspeedtech.com> Signed-off-by:
-
Ainux.Wang authored
The function ast_get_modes() will also return 0, when it try to get the edid, but it also do not get the edid. Signed-off-by:
Ainux.Wang <ainux.wang@gmail.com> Signed-off-by:
-
Hridya Valsaraju authored
The DMA-BUF attachment statistics form a subset of the DMA-BUF sysfs statistics that recently merged to the drm-misc tree. They are not UABI yet since they have not merged to the upstream Linux kernel. Since there has been a reported a performance regression due to the overhead of sysfs directory creation/teardown during dma_buf_attach()/dma_buf_detach(), this patch deletes the DMA-BUF attachment statistics from sysfs. Fixes: bdb8d06d ("dmabuf: Add the capability to expose DMA-BUF stats in sysfs") Signed-off-by:
Hridya Valsaraju <hridya@google.com> Reviewed-by:
-
- 19 Jul, 2021 5 commits
-
-
Thomas Zimmermann authored
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers don't benefit from using it. This patch also fixes a bug where the driver didn't release the IRQ. v2: * automatically release IRQ via devm_request_irq() (Paul) * mention the bugfix (Sam) Signed-off-by:
Paul Cercueil <paul@crapouillou.net> Link: https://patchwork.freedesktop.org/patch/msgid/20210715100258.6638-1-tzimmermann@suse.de
-
Xiyu Yang authored
refcount_t type and corresponding API can protect refcounters from accidental underflow and overflow and further use-after-free situations. Signed-off-by:
Xiyu Yang <xiyuyang19@fudan.edu.cn> Signed-off-by:
Xin Tan <tanxin.ctf@gmail.com> Signed-off-by:
-
Zheyu Ma authored
The user can pass in any value to the driver through the 'ioctl' interface. The driver dost not check, which may cause DoS bugs. The following log reveals it: divide error: 0000 [#1] PREEMPT SMP KASAN PTI RIP: 0010:SetOverlayViewPort+0x133/0x5f0 drivers/video/fbdev/kyro/STG4000OverlayDevice.c:476 Call Trace: kyro_dev_overlay_viewport_set drivers/video/fbdev/kyro/fbdev.c:378 [inline] kyrofb_ioctl+0x2eb/0x330 drivers/video/fbdev/kyro/fbdev.c:603 do_fb_ioctl+0x1f3/0x700 drivers/video/fbdev/core/fbmem.c:1171 fb_ioctl+0xeb/0x130 drivers/video/fbdev/core/fbmem.c:1185 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __x64_sys_ioctl+0x19b/0x220 fs/ioctl.c:739 do_syscall_64+0x32/0x80 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xae Signed-off-by:
-
Antonio Borneo authored
The driver uses a conservative set of hardcoded values for the maximum time delay of the transitions between LP and HS, either for data and clock lanes. By using the info in STM32MP157 datasheet, valid also for other ST devices, compute the actual delay from the lane's bps. Signed-off-by:
Antonio Borneo <antonio.borneo@foss.st.com> Reviewed-by:
Philippe Cornu <philippe.cornu@foss.st.com> Acked-by:
-
Jagan Teki authored
As dw-mipi-dsi supported all possible ways to find the DSI devices. It can take multiple iterations for ltdc to find all components attached to the DSI bridge. The current ltdc driver failed to find the endpoint as it returned -EINVAL for the first iteration itself. This leads to following error: [ 3.099289] [drm:ltdc_load] *ERROR* init encoder endpoint 0 So, check the return value and cleanup the encoder only if it's not -EPROBE_DEFER. This make all components in the attached DSI bridge found properly. Signed-off-by:
Jagan Teki <jagan@amarulasolutions.com> Tested-by:
Yannick Fertre <yannick.fertre@foss.st.com> Acked-by:
-
- 17 Jul, 2021 2 commits
-
-
Linus Walleij authored
This adds a driver for panels based on the WideChips WS2401 display controller. This display controller is used in the Samsung LMS380KF01 display found in the Samsung GT-I8160 (Codina) mobile phone and possibly others. As is common with Samsung displays manufacturer commands are necessary to configure the display to a working state. The display optionally supports internal backlight control, but can also use an external backlight. This driver re-uses the DBI infrastructure to communicate with the display. Cc: phone-devel@vger.kernel.org Cc: Douglas Anderson <dianders@chromium.org> Reviewed-by:
Noralf Trønnes <noralf@tronnes.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20210714225002.1065107-2-linus.walleij@linaro.org
-
Linus Walleij authored
This adds device tree bindings for the Samsung Mobile Displays LMS380KF01 RGB DPI display panel. Cc: devicetree@vger.kernel.org Cc: phone-devel@vger.kernel.org Cc: Noralf Trønnes <noralf@tronnes.org> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
- 15 Jul, 2021 9 commits
-
-
Douglas Anderson authored
Even after the DP AUX backlight on my board worked OK after applying the patch ("drm/panel-simple: Power the panel when probing DP AUX backlight") [1], I still noticed some strange timeouts being reported by ti_sn_aux_transfer(). Digging, I realized the problem was this: * Even though `enabled` in `struct dp_aux_backlight` was false, the base backlight structure (`base` in that structure) thought that the backlight was powered on. * If userspace wrote to sysfs in this state then we'd try to enable the backlight. * Unfortunatley, enabling the backlight didn't work because the panel itself wasn't powered. We can only use the backlight if the panel is on and the panel is not officially on when we probe (it's temporarily just on enough for us to talk to it). The important thing we want here is to get `BL_CORE_FBBLANK` set since userspace can't mess with that. This will keep us disabled until drm_panel enables us, which means that the panel is enabled first. Ideally we'd just set this in our `props` before calling devm_backlight_device_register() but the comments in the header file are pretty explicit that we're not supposed to much with the `state` ourselves. Because of this, there may be a small window where the backlight device is registered and someone could try to tweak with the backlight. This isn't likely to happen and even if it did, I don't believe this causes any huge problem. [1] https://lore.kernel.org/lkml/20210714093334.1.Idb41f87e5abae4aee0705db7458b0097fc50e7ab@changeid/Signed-off-by:Lyude Paul <lyude@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210714101744.1.Ifc22696b27930749915e383f0108b7bcdc015a6e@changeid
-
Douglas Anderson authored
When I tried booting up a device that needed the DP AUX backlight, I found an error in the logs: panel-simple-dp-aux: probe of aux-ti_sn65dsi86.aux.0 failed with error -110 The aux transfers were failing because the panel wasn't powered. Just like when reading the EDID we need to power the panel when trying to talk to it. Add the needed pm_runtime calls. After I do this I can successfully probe the panel and adjust the backlight on my board. Fixes: bfd45140 ("drm/panel-simple: Support DP AUX backlight") Signed-off-by:
-
Steven Price authored
When bailing out due to the sanity check the iterator value needs to be freed because the early return prevents for_each_child_of_node() from doing the dereference itself. Fixes: 65290075 ("drm: of: Add drm_of_lvds_get_dual_link_pixel_order") Signed-off-by:
Steven Price <steven.price@arm.com> Reviewed-by:
-
Thomas Zimmermann authored
The comment refers to drm_irq_install() et al, which are not used by omapdrm. The functions are part of the DRM IRQ midlayer and shouldn't be used any longer. Remove the comment. Signed-off-by:
-
Thomas Zimmermann authored
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers don't benefit from using it. Signed-off-by:
-
Thomas Zimmermann authored
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers don't benefit from using it. Signed-off-by:
-
Maxime Ripard authored
The drm_encoder crtc pointer isn't really fit for an atomic driver, let's rely on the connector state instead. Signed-off-by:
-
Maxime Ripard authored
Our hotplug handler will currently call the drm_kms_helper_hotplug_event every time a hotplug interrupt is called. However, since the device is registered after all the drivers have finished their bind callback, we have a window between when we install our interrupt handler and when drm_dev_register() is eventually called where our handler can run and call drm_kms_helper_hotplug_event but the device hasn't been registered yet, causing a null pointer dereference. Fix this by making sure we only call drm_kms_helper_hotplug_event if our device has been properly registered. Fixes: f4790083 ("drm/vc4: hdmi: Rely on interrupts to handle hotplug") Signed-off-by:
Dave Stevenson <dave.stevenson@raspberrypi.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210707095112.1469670-4-maxime@cerno.tech
-
Maxime Ripard authored
The hotplugs interrupt handlers are registered through the devm_request_threaded_irq function. However, while free_irq is indeed called properly when the device is unbound or bind fails, it's called after unbind or bind is done. In our particular case, it means that on failure it creates a window where our interrupt handler can be called, but we're freeing every resource (CEC adapter, DRM objects, etc.) it might need. In order to address this, let's switch to the non-devm variant to control better when the handler will be unregistered and allow us to make it safe. Fixes: f4790083 ("drm/vc4: hdmi: Rely on interrupts to handle hotplug") Signed-off-by:
-
