- 04 Jan, 2016 10 commits
-
-
Vlad Yasevich authored
commit f6548615 upstream. skb_reorder_vlan_header is called after the vlan header has been pulled. As a result the offset of the begining of the mac header has been incrased by 4 bytes (VLAN_HLEN). When moving the mac addresses, include this incrase in the offset calcualation so that the mac addresses are copied correctly. Fixes: a6e18ff1 (vlan: Fix untag operations of stacked vlans with REORDER_HEADER off) CC: Nicolas Dichtel <nicolas.dichtel@6wind.com> CC: Patrick McHardy <kaber@trash.net> Signed-off-by:
Vladislav Yasevich <vyasevich@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Vlad Yasevich authored
commit a6e18ff1 upstream. When we have multiple stacked vlan devices all of which have turned off REORDER_HEADER flag, the untag operation does not locate the ethernet addresses correctly for nested vlans. The reason is that in case of REORDER_HEADER flag being off, the outer vlan headers are put back and the mac_len is adjusted to account for the presense of the header. Then, the subsequent untag operation, for the next level vlan, always use VLAN_ETH_HLEN to locate the begining of the ethernet header and that ends up being a multiple of 4 bytes short of the actuall beginning of the mac header (the multiple depending on the how many vlan encapsulations ethere are). As a reslult, if there are multiple levles of vlan devices with REODER_HEADER being off, the recevied packets end up being dropped. To solve this, we use skb->mac_len as the offset. The value is always set on receive path and starts out as a ETH_HLEN. The value is also updated when the vlan header manupations occur so we know it will be correct. Signed-off-by:
Vladislav Yasevich <vyasevic@redhat.com> Signed-off-by:
-
Sergei Shtylyov authored
commit 248be83d upstream. In a low memory situation the following kernel oops occurs: Unable to handle kernel NULL pointer dereference at virtual address 00000050 pgd = 8490c000 [00000050] *pgd=4651e831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] PREEMPT ARM Modules linked in: CPU: 0 Not tainted (3.4-at16 #9) PC is at skb_put+0x10/0x98 LR is at sh_eth_poll+0x2c8/0xa10 pc : [<8035f780>] lr : [<8028bf50>] psr: 60000113 sp : 84eb1a90 ip : 84eb1ac8 fp : 84eb1ac4 r10: 0000003f r9 : 000005ea r8 : 00000000 r7 : 00000000 r6 : 940453b0 r5 : 00030000 r4 : 9381b180 r3 : 00000000 r2 : 00000000 r1 : 000005ea r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c53c7d Table: 4248c059 DAC: 00000015 Process klogd (pid: 2046, stack limit = 0x84eb02e8) [...] This is because netdev_alloc_skb() fails and 'mdp->rx_skbuff[entry]' is left NULL but sh_eth_rx() later uses it without checking. Add such check... Reported-by:
Yasushi SHOJI <yashi@atmark-techno.com> Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
Hannes Frederic Sowa authored
commit 79462ad0 upstream. 郭永刚 reported that one could simply crash the kernel as root by using a simple program: int socket_fd; struct sockaddr_in addr; addr.sin_port = 0; addr.sin_addr.s_addr = INADDR_ANY; addr.sin_family = 10; socket_fd = socket(10,3,0x40000000); connect(socket_fd , &addr,16); AF_INET, AF_INET6 sockets actually only support 8-bit protocol identifiers. inet_sock's skc_protocol field thus is sized accordingly, thus larger protocol identifiers simply cut off the higher bits and store a zero in the protocol fields. This could lead to e.g. NULL function pointer because as a result of the cut off inet_num is zero and we call down to inet_autobind, which is NULL for raw sockets. kernel: Call Trace: kernel: [<ffffffff816db90e>] ? inet_autobind+0x2e/0x70 kernel: [<ffffffff816db9a4>] inet_dgram_connect+0x54/0x80 kernel: [<ffffffff81645069>] SYSC_connect+0xd9/0x110 kernel: [<ffffffff810ac51b>] ? ptrace_notify+0x5b/0x80 kernel: [<ffffffff810236d8>] ? syscall_trace_enter_phase2+0x108/0x200 kernel: [<ffffffff81645e0e>] SyS_connect+0xe/0x10 kernel: [<ffffffff81779515>] tracesys_phase2+0x84/0x89 I found no particular commit which introduced this problem. CVE: CVE-2015-8543 Cc: Cong Wang <cwang@twopensource.com> Reported-by:
郭永刚 <guoyonggang@360.cn> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Eric Dumazet authored
commit 9470e24f upstream. SCTP is lacking proper np->opt cloning at accept() time. TCP and DCCP use ipv6_dup_options() helper, do the same in SCTP. We might later factorize this code in a common helper to avoid future mistakes. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
-
Marcelo Ricardo Leitner authored
commit 01ce63c9 upstream. Dmitry Vyukov reported that SCTP was triggering a WARN on socket destroy related to disabling sock timestamp. When SCTP accepts an association or peel one off, it copies sock flags but forgot to call net_enable_timestamp() if a packet timestamping flag was copied, leading to extra calls to net_disable_timestamp() whenever such clones were closed. The fix is to call net_enable_timestamp() whenever we copy a sock with that flag on, like tcp does. Reported-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by:
-
Marcelo Ricardo Leitner authored
commit cb5e173e upstream. SCTP echoes a cookie o INIT ACK chunks that contains a timestamp, for detecting stale cookies. This cookie is echoed back to the server by the client and then that timestamp is checked. Thing is, if the listening socket is using packet timestamping, the cookie is encoded with ktime_get() value and checked against ktime_get_real(), as done by __net_timestamp(). The fix is to sctp also use ktime_get_real(), so we can compare bananas with bananas later no matter if packet timestamping was enabled or not. Fixes: 52db882f ("net: sctp: migrate cookie life from timeval to ktime") Signed-off-by:
-
Pavel Machek authored
commit f2a3771a upstream. atl1c driver is doing order-4 allocation with GFP_ATOMIC priority. That often breaks networking after resume. Switch to GFP_KERNEL. Still not ideal, but should be significantly better. atl1c_setup_ring_resources() is called from .open() function, and already uses GFP_KERNEL, so this change is safe. Signed-off-by:
Pavel Machek <pavel@ucw.cz> Acked-by:
Michal Hocko <mhocko@suse.com> Signed-off-by:
-
Nicolas Dichtel authored
commit 6a61d4db upstream. Parameters were updated only if the kernel was unable to find the tunnel with the new parameters, ie only if core pamareters were updated (keys, addr, link, type). Now it's possible to update ttl, hoplimit, flowinfo and flags. Fixes: c12b395a ("gre: Support GRE over IPv6") Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Quentin Casasnovas authored
commit 8c7188b2 upstream. Sasha's found a NULL pointer dereference in the RDS connection code when sending a message to an apparently unbound socket. The problem is caused by the code checking if the socket is bound in rds_sendmsg(), which checks the rs_bound_addr field without taking a lock on the socket. This opens a race where rs_bound_addr is temporarily set but where the transport is not in rds_bind(), leading to a NULL pointer dereference when trying to dereference 'trans' in __rds_conn_create(). Vegard wrote a reproducer for this issue, so kindly ask him to share if you're interested. I cannot reproduce the NULL pointer dereference using Vegard's reproducer with this patch, whereas I could without. Complete earlier incomplete fix to CVE-2015-6937: 74e98eb0 ("RDS: verify the underlying transport exists before creating a connection") Cc: David S. Miller <davem@davemloft.net> Reviewed-by:
Vegard Nossum <vegard.nossum@oracle.com> Reviewed-by:
Sasha Levin <sasha.levin@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
Quentin Casasnovas <quentin.casasnovas@oracle.com> Signed-off-by:
-
- 18 Dec, 2015 30 commits
-
-
Phil Sutter authored
commit 96fffb4f upstream. This happens when networking namespaces are enabled. Suggested-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
Phil Sutter <phil@nwl.cc> Acked-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Mirek Kratochvil authored
commit 960bd2c2 upstream. The values 0x00000000-0xfffffeff are reserved for userspace datatype. When, deleting set elements with maps, a bogus warning is triggered. WARNING: CPU: 0 PID: 11133 at net/netfilter/nf_tables_api.c:4481 nft_data_uninit+0x35/0x40 [nf_tables]() This fixes the check accordingly to enum definition in include/linux/netfilter/nf_tables.h Fixes: https://bugzilla.netfilter.org/show_bug.cgi?id=1013Signed-off-by:
Mirek Kratochvil <exa.exa@gmail.com> Signed-off-by:
-
lucien authored
commit cc4998fe upstream. --accept-local option works for res.type == RTN_LOCAL, which should be from the local table, but there, the fib_info's nh->nh_scope = RT_SCOPE_NOWHERE ( > RT_SCOPE_HOST). in fib_create_info(). if (cfg->fc_scope == RT_SCOPE_HOST) { struct fib_nh *nh = fi->fib_nh; /* Local address is added. */ if (nhs != 1 || nh->nh_gw) goto err_inval; nh->nh_scope = RT_SCOPE_NOWHERE; <=== nh->nh_dev = dev_get_by_index(net, fi->fib_nh->nh_oif); err = -ENODEV; if (!nh->nh_dev) goto failure; but in our rpfilter_lookup_reverse(): if (dev_match || flags & XT_RPFILTER_LOOSE) return FIB_RES_NH(res).nh_scope <= RT_SCOPE_HOST; if nh->nh_scope > RT_SCOPE_HOST, it will fail. --accept-local option will never be passed. it seems the test is bogus and can be removed to fix this issue. if (dev_match || flags & XT_RPFILTER_LOOSE) return FIB_RES_NH(res).nh_scope <= RT_SCOPE_HOST; ipv6 does not have this issue. Signed-off-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Helmut Klein authored
commit 5442f0ea upstream. The "reg" entry in the "poweroff" section of "kirkwood-ts219.dtsi" addressed the wrong uart (0 = console). This patch changes the address to select uart 1, which is the uart connected to the pic microcontroller, which can switch the device off. Signed-off-by:
Helmut Klein <hgkr.klein@gmail.com> Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Fixes: 4350a47b ("ARM: Kirkwood: Make use of the QNAP Power off driver.") Signed-off-by:
Gregory CLEMENT <gregory.clement@free-electrons.com> Signed-off-by:
-
Jan Engelhardt authored
commit d94e5a61 upstream. target_core_sbc's compare_and_write functionality suffers from taking data at the wrong memory location when writing a CAW request to disk when a SGL offset is non-zero. This can happen with loopback and vhost-scsi fabric drivers when SCF_PASSTHROUGH_SG_TO_MEM_NOALLOC is used to map existing user-space SGL memory into COMPARE_AND_WRITE READ/WRITE payload buffers. Given the following sample LIO subtopology, % targetcli ls /loopback/ o- loopback ................................. [1 Target] o- naa.6001405ebb8df14a ....... [naa.60014059143ed2b3] o- luns ................................... [2 LUNs] o- lun0 ................ [iblock/ram0 (/dev/ram0)] o- lun1 ................ [iblock/ram1 (/dev/ram1)] % lsscsi -g [3:0:1:0] disk LIO-ORG IBLOCK 4.0 /dev/sdc /dev/sg3 [3:0:1:1] disk LIO-ORG IBLOCK 4.0 /dev/sdd /dev/sg4 the following bug can be observed in Linux 4.3 and 4.4~rc1: % perl -e 'print chr$_ for 0..255,reverse 0..255' >rand % perl -e 'print "\0" x 512' >zero % cat rand >/dev/sdd % sg_compare_and_write -i rand -D zero --lba 0 /dev/sdd % sg_compare_and_write -i zero -D rand --lba 0 /dev/sdd Miscompare reported % hexdump -Cn 512 /dev/sdd 00000000 0f 0e 0d 0c 0b 0a 09 08 07 06 05 04 03 02 01 00 00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 * 00000200 Rather than writing all-zeroes as instructed with the -D file, it corrupts the data in the sector by splicing some of the original bytes in. The page of the first entry of cmd->t_data_sg includes the CDB, and sg->offset is set to a position past the CDB. I presume that sg->offset is also the right choice to use for subsequent sglist members. Signed-off-by:
Jan Engelhardt <jengelh@netitwork.de> Tested-by:
Douglas Gilbert <dgilbert@interlog.com> Signed-off-by:
Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by:
-
Nicholas Bellinger authored
commit 057085e5 upstream. This patch addresses a race + use after free where the first stage of COMPARE_AND_WRITE in compare_and_write_callback() is rescheduled after the backend sends the secondary WRITE, resulting in second stage compare_and_write_post() callback completing in target_complete_ok_work() before the first can return. Because current code depends on checking se_cmd->se_cmd_flags after return from se_cmd->transport_complete_callback(), this results in first stage having SCF_COMPARE_AND_WRITE_POST set, which incorrectly falls through into second stage CAW processing code, eventually triggering a NULL pointer dereference due to use after free. To address this bug, pass in a new *post_ret parameter into se_cmd->transport_complete_callback(), and depend upon this value instead of ->se_cmd_flags to determine when to return or fall through into ->queue_status() code for CAW. Cc: Sagi Grimberg <sagig@mellanox.com> Signed-off-by:
-
Nicholas Bellinger authored
commit ca82c2bd upstream. This patch addresses a case where iscsi_target_do_tx_login_io() fails sending the last login response PDU, after the RX/TX threads have already been started. The case centers around iscsi_target_rx_thread() not invoking allow_signal(SIGINT) before the send_sig(SIGINT, ...) occurs from the failure path, resulting in RX thread hanging indefinately on iscsi_conn->rx_login_comp. Note this bug is a regression introduced by: commit e5419865 Author: Nicholas Bellinger <nab@linux-iscsi.org> Date: Wed Jul 22 23:14:19 2015 -0700 iscsi-target: Fix iscsit_start_kthreads failure OOPs To address this bug, complete ->rx_login_complete for good measure in the failure path, and immediately return from RX thread context if connection state did not actually reach full feature phase (TARG_CONN_STATE_LOGGED_IN). Cc: Sagi Grimberg <sagig@mellanox.com> Signed-off-by:
-
Boris Ostrovsky authored
commit 9c17d965 upstream. Doing so will cause the grant to be unmapped and then, during fault handling, the fault to be mistakenly treated as NUMA hint fault. In addition, even if those maps could partcipate in NUMA balancing, it wouldn't provide any benefit since we are unable to determine physical page's node (even if/when VNUMA is implemented). Marking grant maps' VMAs as VM_IO will exclude them from being part of NUMA balancing. Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
-
Jeff Layton authored
commit c812012f upstream. If we pass in an empty nfs_fattr struct to nfs_update_inode, it will (correctly) not update any of the attributes, but it then clears the NFS_INO_INVALID_ATTR flag, which indicates that the attributes are up to date. Don't clear the flag if the fattr struct has no valid attrs to apply. Reviewed-by:
Steve French <steve.french@primarydata.com> Signed-off-by:
Jeff Layton <jeff.layton@primarydata.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Alex Deucher authored
commit 9c565e33 upstream. "Could not force DPM to low", etc. is usually harmless and just confuses users. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Takashi Iwai authored
commit 0c25ad80 upstream. Gigabyte Z710X mobo with ALC1150 codec gets significant noises from the analog loopback routes even if their inputs are all muted. Simply kill the aamix for fixing it. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=108301Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Alex Deucher authored
commit 4e7697ed upstream. On some cards it takes a relatively long time for the change to take place. Make a timeout non-fatal. bug: https://bugs.freedesktop.org/show_bug.cgi?id=76130Signed-off-by:
-
Marc Zyngier authored
commit c0f09634 upstream. When running a 32bit guest under a 64bit hypervisor, the ARMv8 architecture defines a mapping of the 32bit registers in the 64bit space. This includes banked registers that are being demultiplexed over the 64bit ones. On exceptions caused by an operation involving a 32bit register, the HW exposes the register number in the ESR_EL2 register. It was so far understood that SW had to distinguish between AArch32 and AArch64 accesses (based on the current AArch32 mode and register number). It turns out that I misinterpreted the ARM ARM, and the clue is in D1.20.1: "For some exceptions, the exception syndrome given in the ESR_ELx identifies one or more register numbers from the issued instruction that generated the exception. Where the exception is taken from an Exception level using AArch32 these register numbers give the AArch64 view of the register." Which means that the HW is already giving us the translated version, and that we shouldn't try to interpret it at all (for example, doing an MMIO operation from the IRQ mode using the LR register leads to very unexpected behaviours). The fix is thus not to perform a call to vcpu_reg32() at all from vcpu_reg(), and use whatever register number is supplied directly. The only case we need to find out about the mapping is when we actively generate a register access, which only occurs when injecting a fault in a guest. Reviewed-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Christoffer Dall <christoffer.dall@linaro.org> Signed-off-by:
-
Hui Wang authored
commit 8c69729b upstream. We have a machine Dell XPS 13 with the codec alc256, after resume back from S3, the headphone has noise when play sound. Through comparing with the coeff vaule before and after S3, we found restoring a coeff register will help remove noise. BugLink: https://bugs.launchpad.net/bugs/1519168 Cc: Kailang Yang <kailang@realtek.com> Signed-off-by:
Hui Wang <hui.wang@canonical.com> Signed-off-by:
-
Benjamin Coddington authored
commit c68a027c upstream. If clp->cl_cb_ident is zero, then nfs_cb_idr_remove_locked() skips removing it when the nfs_client is freed. A decoding or server bug can then find and try to put that first nfs_client which would lead to a crash. Signed-off-by:
Benjamin Coddington <bcodding@redhat.com> Fixes: d6870312 ("nfs4client: convert to idr_alloc()") Signed-off-by:
-
Jan Kara authored
commit c2489e07 upstream. The following test program from Dmitry can cause softlockups or RCU stalls as it copies 1GB from tmpfs into eventfd and we don't have any scheduling point at that path in sendfile(2) implementation: int r1 = eventfd(0, 0); int r2 = memfd_create("", 0); unsigned long n = 1<<30; fallocate(r2, 0, 0, n); sendfile(r1, r2, 0, n); Add cond_resched() into __splice_from_pipe() to fix the problem. CC: Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Jan Kara authored
commit c725bfce upstream. Commit 296291cd (mm: make sendfile(2) killable) fixed an issue where sendfile(2) was doing a lot of tiny writes into a filesystem and thus was unkillable for a long time. However sendfile(2) can be (mis)used to issue lots of writes into arbitrary file descriptor such as evenfd or similar special file descriptors which never hit the standard filesystem write path and thus are still unkillable. E.g. the following example from Dmitry burns CPU for ~16s on my test system without possibility to be killed: int r1 = eventfd(0, 0); int r2 = memfd_create("", 0); unsigned long n = 1<<30; fallocate(r2, 0, 0, n); sendfile(r1, r2, 0, n); There are actually quite a few tests for pending signals in sendfile code however we data to write is always available none of them seems to trigger. So fix the problem by adding a test for pending signal into splice_from_pipe_next() also before the loop waiting for pipe buffers to be available. This should fix all the lockup issues with sendfile of the do-ton-of-tiny-writes nature. Reported-by:
-
Al Viro authored
commit 0ebf7f10 upstream. The thing got broken back in 2002 - sysvfs does *not* have inline symlinks; even short ones have bodies stored in the first block of file. sysv_symlink() handles that correctly; unfortunately, attempting to look an existing symlink up will end up confusing them for inline symlinks, and interpret the block number containing the body as the body itself. Nobody has noticed until now, which says something about the level of testing sysvfs gets ;-/ Signed-off-by:
-
Vineet Gupta authored
commit 2e22502c upstream. Fixes STAR 9000953410: "perf callgraph profiling causing RCU stalls" | perf record -g -c 15000 -e cycles /sbin/hackbench | | INFO: rcu_preempt self-detected stall on CPU | 1: (1 GPs behind) idle=609/140000000000002/0 softirq=2914/2915 fqs=603 | Task dump for CPU 1: in-kernel dwarf unwinder has a fast binary lookup and a fallback linear search (which iterates thru each of ~11K entries) thus takes 2 orders of magnitude longer (~3 million cycles vs. 2000). Routines written in hand assembler lack dwarf info (as we don't support assembler CFI pseudo-ops yet) fail the unwinder binary lookup, hit linear search, failing nevertheless in the end. However the linear search is pointless as binary lookup tables are created from it in first place. It is impossible to have binary lookup fail while succeed the linear search. It is pure waste of cycles thus removed by this patch. This manifested as RCU stalls / NMI watchdog splat when running hackbench under perf with callgraph profiling. The triggering condition was perf counter overflowing in routine lacking dwarf info (like memset) leading to patheic 3 million cycle unwinder slow path and by the time it returned new interrupts were already pending (Timer, IPI) and taken rightaway. The original memset didn't make forward progress, system kept accruing more interrupts and more unwinder delayes in a vicious feedback loop, ultimately triggering the NMI diagnostic. Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Michael Neuling authored
commit 7f821fc9 upstream. Currently we can hit a scenario where we'll tm_reclaim() twice. This results in a TM bad thing exception because the second reclaim occurs when not in suspend mode. The scenario in which this can happen is the following. We attempt to deliver a signal to userspace. To do this we need obtain the stack pointer to write the signal context. To get this stack pointer we must tm_reclaim() in case we need to use the checkpointed stack pointer (see get_tm_stackpointer()). Normally we'd then return directly to userspace to deliver the signal without going through __switch_to(). Unfortunatley, if at this point we get an error (such as a bad userspace stack pointer), we need to exit the process. The exit will result in a __switch_to(). __switch_to() will attempt to save the process state which results in another tm_reclaim(). This tm_reclaim() now causes a TM Bad Thing exception as this state has already been saved and the processor is no longer in TM suspend mode. Whee! This patch checks the state of the MSR to ensure we are TM suspended before we attempt the tm_reclaim(). If we've already saved the state away, we should no longer be in TM suspend mode. This has the additional advantage of checking for a potential TM Bad Thing exception. Found using syscall fuzzer. Fixes: fb09692e ("powerpc: Add reclaim and recheckpoint functions for context switching transactional memory processes") Signed-off-by:
Michael Neuling <mikey@neuling.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Michael Neuling authored
commit d2b9d2a5 upstream. Currently we allow both the MSR T and S bits to be set by userspace on a signal return. Unfortunately this is a reserved configuration and will cause a TM Bad Thing exception if attempted (via rfid). This patch checks for this case in both the 32 and 64 bit signals code. If both T and S are set, we mark the context as invalid. Found using a syscall fuzzer. Fixes: 2b0a576d ("powerpc: Add new transactional memory state to the signal context") Signed-off-by:
-
Takashi Iwai authored
commit 196543d5 upstream. It turned out that many HP laptops suffer from the same problem as fixed in commit [c932b98c: ALSA: hda - Apply pin fixup for HP ProBook 6550b]. But, it's tiresome to list up all such PCI SSIDs, as there are really lots of HP machines. Instead, we do a bit more clever, try to check the supposedly dock and built-in headphone pins, and apply the fixup when both seem valid. This rule can be applied generically to all models using the same quirk, so we'll fix all in a shot. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=107491Signed-off-by:
-
Kees Cook authored
commit 02e2a5bf upstream. If md->signature == MAC_DRIVER_MAGIC and md->block_size == 1023, a single 512 byte sector would be read (secsize / 512). However the partition structure would be located past the end of the buffer (secsize % 512). Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Takashi Iwai authored
commit b9c2fa52 upstream. For making the speakers on Acer Aspire One Cloudbook 14 to work, we need the as same quirk as for another Chromebook. This patch adds the corresponding fixup entry. Reported-by:
Patrick <epictetus@gmail.com> Signed-off-by:
-
James Hogan authored
commit 585bb8f9 upstream. If either of the memory allocations in kvm_arch_vcpu_create() fail, the vcpu which has been allocated and kvm_vcpu_init'd doesn't get uninit'd in the error handling path. Add a call to kvm_vcpu_uninit() to fix this. Fixes: 669e846e ("KVM/MIPS32: MIPS arch specific APIs for KVM") Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: linux-mips@linux-mips.org Cc: kvm@vger.kernel.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> [ luis: backported to 3.16: - file rename: mips.c -> kvm_mips.c ] Signed-off-by:
-
James Hogan authored
commit c5c2a3b9 upstream. The immediate field of the CACHE instruction is signed, so ensure that it gets sign extended by casting it to an int16_t rather than just masking the low 16 bits. Fixes: e685c689 ("KVM/MIPS32: Privileged instruction/target branch emulation.") Signed-off-by:
-
James Hogan authored
commit 002374f3 upstream. ASID restoration on guest resume should determine the guest execution mode based on the guest Status register rather than bit 30 of the guest PC. Fix the two places in locore.S that do this, loading the guest status from the cop0 area. Note, this assembly is specific to the trap & emulate implementation of KVM, so it doesn't need to check the supervisor bit as that mode is not implemented in the guest. Fixes: b680f70f ("KVM/MIPS32: Entry point for trampolining to...") Signed-off-by:
-
Junichi Nomura authored
commit 5bbbfdf6 upstream. dm-mpath retries ioctl, when no path is readily available and the device is configured to queue I/O in such a case. If you want to stop the retry before multipathd decides to turn off queueing mode, you could send signal for the process to exit from the loop. However the check of fatal signal has not carried along when commit 6c182cd8 ("dm mpath: fix ioctl deadlock when no paths") moved the loop from dm-mpath to dm core. As a result, we can't terminate such a process in the retry loop. Easy reproducer of the situation is: # dmsetup create mp --table '0 1024 multipath 0 0 0 0' # dmsetup message mp 0 'queue_if_no_path' # sg_inq /dev/mapper/mp then you should be able to terminate sg_inq by pressing Ctrl+C. Fixes: 6c182cd8 ("dm mpath: fix ioctl deadlock when no paths") Signed-off-by:
Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Cc: Hannes Reinecke <hare@suse.de> Cc: Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Mike Snitzer <snitzer@redhat.com> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Mike Snitzer authored
commit 172c2386 upstream. A thin-pool that is in out-of-data-space (OODS) mode may transition back to write mode -- without the admin adding more space to the thin-pool -- if/when blocks are released (either by deleting thin devices or discarding provisioned blocks). But as part of the thin-pool's earlier transition to out-of-data-space mode the thin-pool may have set the 'error_if_no_space' flag to true if the no_space_timeout expires without more space having been made available. That implementation detail, of changing the pool's error_if_no_space setting, needs to be reset back to the default that the user specified when the thin-pool's table was loaded. Otherwise we'll drop the user requested behaviour on the floor when this out-of-data-space to write mode transition occurs. Reported-by:
Vivek Goyal <vgoyal@redhat.com> Signed-off-by:
Joe Thornber <ejt@redhat.com> Fixes: 2c43fd26 ("dm thin: fix missing out-of-data-space to write mode transition if blocks are released") [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Clemens Ladisch authored
commit a91e627e upstream. One of the many faults of the QinHeng CH345 USB MIDI interface chip is that it does not handle received SysEx messages correctly -- every second event packet has a wrong code index number, which is the one from the last seen message, instead of 4. For example, the two messages "FE F0 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E F7" result in the following event packets: correct: CH345: 0F FE 00 00 0F FE 00 00 04 F0 01 02 04 F0 01 02 04 03 04 05 0F 03 04 05 04 06 07 08 04 06 07 08 04 09 0A 0B 0F 09 0A 0B 04 0C 0D 0E 04 0C 0D 0E 05 F7 00 00 05 F7 00 00 A class-compliant driver must interpret an event packet with CIN 15 as having a single data byte, so the other two bytes would be ignored. The message received by the host would then be missing two bytes out of six; in this example, "F0 01 02 03 06 07 08 09 0C 0D 0E F7". These corrupted SysEx event packages contain only data bytes, while the CH345 uses event packets with a correct CIN value only for messages with a status byte, so it is possible to distinguish between these two cases by checking for the presence of this status byte. (Other bugs in the CH345's input handling, such as the corruption resulting from running status, cannot be worked around.) Signed-off-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
-
