- 27 Jul, 2021 2 commits
-
-
John Fastabend authored
Its possible if a socket is closed and the receive thread is under memory pressure it may have cached a skb. We need to ensure these skbs are free'd along with the normal ingress_skb queue. Before 799aa7f9 ("skmsg: Avoid lock_sock() in sk_psock_backlog()") tear down and backlog processing both had sock_lock for the common case of socket close or unhash. So it was not possible to have both running in parrallel so all we would need is the kfree in those kernels. But, latest kernels include the commit 799aa7f98d5e and this requires a bit more work. Without the ingress_lock guarding reading/writing the state->skb case its possible the tear down could run before the state update causing it to leak memory or worse when the backlog reads the state it could potentially run interleaved with the tear down and we might end up free'ing the state->skb from tear down side but already have the reference from backlog side. To resolve such races we wrap accesses in ingress_lock on both sides serializing tear down and backlog case. In both cases this only happens after an EAGAIN error case so having an extra lock in place is likely fine. The normal path will skip the locks. Note, we check state->skb before grabbing lock. This works because we can only enqueue with the mutex we hold already. Avoiding a race on adding state->skb after the check. And if tear down path is running that is also fine if the tear down path then removes state->skb we will simply set skb=NULL and the subsequent goto is skipped. This slight complication avoids locking in normal case. With this fix we no longer see this warning splat from tcp side on socket close when we hit the above case with redirect to ingress self. [224913.935822] WARNING: CPU: 3 PID: 32100 at net/core/stream.c:208 sk_stream_kill_queues+0x212/0x220 [224913.935841] Modules linked in: fuse overlay bpf_preload x86_pkg_temp_thermal intel_uncore wmi_bmof squashfs sch_fq_codel efivarfs ip_tables x_tables uas xhci_pci ixgbe mdio xfrm_algo xhci_hcd wmi [224913.935897] CPU: 3 PID: 32100 Comm: fgs-bench Tainted: G I 5.14.0-rc1alu+ #181 [224913.935908] Hardware name: Dell Inc. Precision 5820 Tower/002KVM, BIOS 1.9.2 01/24/2019 [224913.935914] RIP: 0010:sk_stream_kill_queues+0x212/0x220 [224913.935923] Code: 8b 83 20 02 00 00 85 c0 75 20 5b 5d 41 5c 41 5d 41 5e 41 5f c3 48 89 df e8 2b 11 fe ff eb c3 0f 0b e9 7c ff ff ff 0f 0b eb ce <0f> 0b 5b 5d 41 5c 41 5d 41 5e 41 5f c3 90 0f 1f 44 00 00 41 57 41 [224913.935932] RSP: 0018:ffff88816271fd38 EFLAGS: 00010206 [224913.935941] RAX: 0000000000000ae8 RBX: ffff88815acd5240 RCX: dffffc0000000000 [224913.935948] RDX: 0000000000000003 RSI: 0000000000000ae8 RDI: ffff88815acd5460 [224913.935954] RBP: ffff88815acd5460 R08: ffffffff955c0ae8 R09: fffffbfff2e6f543 [224913.935961] R10: ffffffff9737aa17 R11: fffffbfff2e6f542 R12: ffff88815acd5390 [224913.935967] R13: ffff88815acd5480 R14: ffffffff98d0c080 R15: ffffffff96267500 [224913.935974] FS: 00007f86e6bd1700(0000) GS:ffff888451cc0000(0000) knlGS:0000000000000000 [224913.935981] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [224913.935988] CR2: 000000c0008eb000 CR3: 00000001020e0005 CR4: 00000000003706e0 [224913.935994] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [224913.936000] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [224913.936007] Call Trace: [224913.936016] inet_csk_destroy_sock+0xba/0x1f0 [224913.936033] __tcp_close+0x620/0x790 [224913.936047] tcp_close+0x20/0x80 [224913.936056] inet_release+0x8f/0xf0 [224913.936070] __sock_release+0x72/0x120 [224913.936083] sock_close+0x14/0x20 Fixes: a136678c ("bpf: sk_msg, zap ingress queue on psock down") Signed-off-by:
John Fastabend <john.fastabend@gmail.com> Signed-off-by:
Andrii Nakryiko <andrii@kernel.org> Acked-by:
Jakub Sitnicki <jakub@cloudflare.com> Acked-by:
Martin KaFai Lau <kafai@fb.com> Link: https://lore.kernel.org/bpf/20210727160500.1713554-3-john.fastabend@gmail.com
-
John Fastabend authored
We don't want strparser to run and pass skbs into skmsg handlers when the psock is null. We just sk_drop them in this case. When removing a live socket from map it means extra drops that we do not need to incur. Move the zap below strparser close to avoid this condition. This way we stop the stream parser first stopping it from processing packets and then delete the psock. Fixes: a136678c ("bpf: sk_msg, zap ingress queue on psock down") Signed-off-by:
-
- 19 Jul, 2021 1 commit
-
-
Lorenz Bauer authored
We got the following UBSAN report on one of our testing machines: ================================================================================ UBSAN: array-index-out-of-bounds in kernel/bpf/syscall.c:2389:24 index 6 is out of range for type 'char *[6]' CPU: 43 PID: 930921 Comm: systemd-coredum Tainted: G O 5.10.48-cloudflare-kasan-2021.7.0 #1 Hardware name: <snip> Call Trace: dump_stack+0x7d/0xa3 ubsan_epilogue+0x5/0x40 __ubsan_handle_out_of_bounds.cold+0x43/0x48 ? seq_printf+0x17d/0x250 bpf_link_show_fdinfo+0x329/0x380 ? bpf_map_value_size+0xe0/0xe0 ? put_files_struct+0x20/0x2d0 ? __kasan_kmalloc.constprop.0+0xc2/0xd0 seq_show+0x3f7/0x540 seq_read_iter+0x3f8/0x1040 seq_read+0x329/0x500 ? seq_read_iter+0x1040/0x1040 ? __fsnotify_parent+0x80/0x820 ? __fsnotify_update_child_dentry_flags+0x380/0x380 vfs_read+0x123/0x460 ksys_read+0xed/0x1c0 ? __x64_sys_pwrite64+0x1f0/0x1f0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 <snip> ================================================================================ ================================================================================ UBSAN: object-size-mismatch in kernel/bpf/syscall.c:2384:2 From the report, we can infer that some array access in bpf_link_show_fdinfo at index 6 is out of bounds. The obvious candidate is bpf_link_type_strs[BPF_LINK_TYPE_XDP] with BPF_LINK_TYPE_XDP == 6. It turns out that BPF_LINK_TYPE_XDP is missing from bpf_types.h and therefore doesn't have an entry in bpf_link_type_strs: pos: 0 flags: 02000000 mnt_id: 13 link_type: (null) link_id: 4 prog_tag: bcf7977d3b93787c prog_id: 4 ifindex: 1 Fixes: aa8d3a71 ("bpf, xdp: Add bpf_link-based XDP attachment API") Signed-off-by:Lorenz Bauer <lmb@cloudflare.com> Signed-off-by:
-
- 16 Jul, 2021 3 commits
-
-
Daniel Borkmann authored
Add several test cases for checking update_alu_sanitation_state() under multiple paths: # ./test_verifier [...] #1061/u map access: known scalar += value_ptr unknown vs const OK #1061/p map access: known scalar += value_ptr unknown vs const OK #1062/u map access: known scalar += value_ptr const vs unknown OK #1062/p map access: known scalar += value_ptr const vs unknown OK #1063/u map access: known scalar += value_ptr const vs const (ne) OK #1063/p map access: known scalar += value_ptr const vs const (ne) OK #1064/u map access: known scalar += value_ptr const vs const (eq) OK #1064/p map access: known scalar += value_ptr const vs const (eq) OK #1065/u map access: known scalar += value_ptr unknown vs unknown (eq) OK #1065/p map access: known scalar += value_ptr unknown vs unknown (eq) OK #1066/u map access: known scalar += value_ptr unknown vs unknown (lt) OK #1066/p map access: known scalar += value_ptr unknown vs unknown (lt) OK #1067/u map access: known scalar += value_ptr unknown vs unknown (gt) OK #1067/p map access: known scalar += value_ptr unknown vs unknown (gt) OK [...] Summary: 1762 PASSED, 0 SKIPPED, 0 FAILED Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org>
-
Daniel Borkmann authored
In 7fedb63a ("bpf: Tighten speculative pointer arithmetic mask") we narrowed the offset mask for unprivileged pointer arithmetic in order to mitigate a corner case where in the speculative domain it is possible to advance, for example, the map value pointer by up to value_size-1 out-of- bounds in order to leak kernel memory via side-channel to user space. The verifier's state pruning for scalars leaves one corner case open where in the first verification path R_x holds an unknown scalar with an aux->alu_limit of e.g. 7, and in a second verification path that same register R_x, here denoted as R_x', holds an unknown scalar which has tighter bounds and would thus satisfy range_within(R_x, R_x') as well as tnum_in(R_x, R_x') for state pruning, yielding an aux->alu_limit of 3: Given the second path fits the register constraints for pruning, the final generated mask from aux->alu_limit will remain at 7. While technically not wrong for the non-speculative domain, it would however be possible to craft similar cases where the mask would be too wide as in 7fedb63a. One way to fix it is to detect the presence of unknown scalar map pointer arithmetic and force a deeper search on unknown scalars to ensure that we do not run into a masking mismatch. Signed-off-by:
-
Daniel Borkmann authored
Follow-up to fe9a5ca7 ("bpf: Do not mark insn as seen under speculative path verification"). The sanitize_insn_aux_data() helper does not serve a particular purpose in today's code. The original intention for the helper was that if function-by-function verification fails, a given program would be cleared from temporary insn_aux_data[], and then its verification would be re-attempted in the context of the main program a second time. However, a failure in do_check_subprogs() will skip do_check_main() and propagate the error to the user instead, thus such situation can never occur. Given its interaction is not compatible to the Spectre v1 mitigation (due to comparing aux->seen with env->pass_cnt), just remove sanitize_insn_aux_data() to avoid future bugs in this area. Signed-off-by:
-
- 15 Jul, 2021 14 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Andrii Nakryiko says: ==================== pull-request: bpf 2021-07-15 The following pull-request contains BPF updates for your *net* tree. We've added 9 non-merge commits during the last 5 day(s) which contain a total of 9 files changed, 37 insertions(+), 15 deletions(-). The main changes are: 1) Fix NULL pointer dereference in BPF_TEST_RUN for BPF_XDP_DEVMAP and BPF_XDP_CPUMAP programs, from Xuan Zhuo. 2) Fix use-after-free of net_device in XDP bpf_link, from Xuan Zhuo. 3) Follow-up fix to subprog poke descriptor use-after-free problem, from Daniel Borkmann and John Fastabend. 4) Fix out-of-range array access in s390 BPF JIT backend, from Colin Ian King. 5) Fix memory leak in BPF sockmap, from John Fastabend. 6) Fix for sockmap to prevent proc stats reporting bug, from John Fastabend and Jakub Sitnicki. 7) Fix NULL pointer dereference in bpftool, from Tobias Klauser. 8) AF_XDP documentation fixes, from Baruch Siach. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Dongliang Mu authored
The current error handling code of hso_create_net_device is hso_free_net_device, no matter which errors lead to. For example, WARNING in hso_free_net_device [1]. Fix this by refactoring the error handling code of hso_create_net_device by handling different errors by different code. [1] https://syzkaller.appspot.com/bug?id=66eff8d49af1b28370ad342787413e35bbe76efe Reported-by: syzbot+44d53c7255bb1aea22d2@syzkaller.appspotmail.com Fixes: 5fcfb6d0 ("hso: fix bailout in error case of probe") Signed-off-by:
Dongliang Mu <mudongliangabcd@gmail.com> Signed-off-by:
-
Jia He authored
Liajian reported a bug_on hit on a ThunderX2 arm64 server with FastLinQ QL41000 ethernet controller: BUG: scheduling while atomic: kworker/0:4/531/0x00000200 [qed_probe:488()]hw prepare failed kernel BUG at mm/vmalloc.c:2355! Internal error: Oops - BUG: 0 [#1] SMP CPU: 0 PID: 531 Comm: kworker/0:4 Tainted: G W 5.4.0-77-generic #86-Ubuntu pstate: 00400009 (nzcv daif +PAN -UAO) Call trace: vunmap+0x4c/0x50 iounmap+0x48/0x58 qed_free_pci+0x60/0x80 [qed] qed_probe+0x35c/0x688 [qed] __qede_probe+0x88/0x5c8 [qede] qede_probe+0x60/0xe0 [qede] local_pci_probe+0x48/0xa0 work_for_cpu_fn+0x24/0x38 process_one_work+0x1d0/0x468 worker_thread+0x238/0x4e0 kthread+0xf0/0x118 ret_from_fork+0x10/0x18 In this case, qed_hw_prepare() returns error due to hw/fw error, but in theory work queue should be in process context instead of interrupt. The root cause might be the unpaired spin_{un}lock_bh() in _qed_mcp_cmd_and_union(), which causes botton half is disabled incorrectly. Reported-by:Lijian Zhang <Lijian.Zhang@arm.com> Signed-off-by:
Jia He <justin.he@arm.com> Signed-off-by:
-
Ziyang Xuan authored
When nr_segs equal to zero in iovec_from_user, the object msg->msg_iter.iov is uninit stack memory in caif_seqpkt_sendmsg which is defined in ___sys_sendmsg. So we cann't just judge msg->msg_iter.iov->base directlly. We can use nr_segs to judge msg in caif_seqpkt_sendmsg whether has data buffers. ===================================================== BUG: KMSAN: uninit-value in caif_seqpkt_sendmsg+0x693/0xf60 net/caif/caif_socket.c:542 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 caif_seqpkt_sendmsg+0x693/0xf60 net/caif/caif_socket.c:542 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg net/socket.c:672 [inline] ____sys_sendmsg+0x12b6/0x1350 net/socket.c:2343 ___sys_sendmsg net/socket.c:2397 [inline] __sys_sendmmsg+0x808/0xc90 net/socket.c:2480 __compat_sys_sendmmsg net/compat.c:656 [inline] Reported-by: syzbot+09a5d591c1f98cf5efcb@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?id=1ace85e8fc9b0d5a45c08c2656c3e91762daa9b8 Fixes: bece7b23 ("caif: Rewritten socket implementation") Signed-off-by:
Ziyang Xuan <william.xuanziyang@huawei.com> Signed-off-by:
-
Tobias Klauser authored
Fix and add a missing NULL check for the prior malloc() call. Fixes: 49a086c2 ("bpftool: implement prog load command") Signed-off-by:
Tobias Klauser <tklauser@distanz.ch> Signed-off-by:
Quentin Monnet <quentin@isovalent.com> Acked-by:
Roman Gushchin <guro@fb.com> Link: https://lore.kernel.org/bpf/20210715110609.29364-1-tklauser@distanz.ch
-
Jakub Sitnicki authored
The proc socket stats use sk_prot->inuse_idx value to record inuse sock stats. We currently do not set this correctly from sockmap side. The result is reading sock stats '/proc/net/sockstat' gives incorrect values. The socket counter is incremented correctly, but because we don't set the counter correctly when we replace sk_prot we may omit the decrement. To get the correct inuse_idx value move the core_initcall that initializes the UDP proto handlers to late_initcall. This way it is initialized after UDP has the chance to assign the inuse_idx value from the register protocol handler. Fixes: edc6741c ("bpf: Add sockmap hooks for UDP sockets") Signed-off-by:
Cong Wang <cong.wang@bytedance.com> Acked-by:
-
John Fastabend authored
The proc socket stats use sk_prot->inuse_idx value to record inuse sock stats. We currently do not set this correctly from sockmap side. The result is reading sock stats '/proc/net/sockstat' gives incorrect values. The socket counter is incremented correctly, but because we don't set the counter correctly when we replace sk_prot we may omit the decrement. To get the correct inuse_idx value move the core_initcall that initializes the TCP proto handlers to late_initcall. This way it is initialized after TCP has the chance to assign the inuse_idx value from the register protocol handler. Fixes: 604326b4 ("bpf, sockmap: convert to generic sk_msg interface") Suggested-by:
-
John Fastabend authored
If skb_linearize is needed and fails we could leak a msg on the error handling. To fix ensure we kfree the msg block before returning error. Found during code review. Fixes: 4363023d ("bpf, sockmap: Avoid failures from skb_to_sgvec when skb has frag_list") Signed-off-by:
-
Colin Ian King authored
Currently array jit->seen_reg[r1] is being accessed before the range checking of index r1. The range changing on r1 should be performed first since it will avoid any potential out-of-range accesses on the array seen_reg[] and also it is more optimal to perform checks on r1 before fetching data from the array. Fix this by swapping the order of the checks before the array access. Fixes: 05462310 ("s390/bpf: Add s390x eBPF JIT compiler backend") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Ilya Leoshkevich <iii@linux.ibm.com> Acked-by:
-
Qitao Xu authored
Tracepoint trace_qdisc_enqueue() is introduced to trace skb at the entrance of TC layer on TX side. This is similar to trace_qdisc_dequeue(): 1. For both we only trace successful cases. The failure cases can be traced via trace_kfree_skb(). 2. They are called at entrance or exit of TC layer, not for each ->enqueue() or ->dequeue(). This is intentional, because we want to make trace_qdisc_enqueue() symmetric to trace_qdisc_dequeue(), which is easier to use. The return value of qdisc_enqueue() is not interesting here, we have Qdisc's drop packets in ->dequeue(), it is impossible to trace them even if we have the return value, the only way to trace them is tracing kfree_skb(). We only add information we need to trace ring buffer. If any other information is needed, it is easy to extend it without breaking ABI, see commit 3dd344ea ("net: tracepoint: exposing sk_family in all tcp:tracepoints"). Reviewed-by:
Qitao Xu <qitao.xu@bytedance.com> Signed-off-by:
-
Qitao Xu authored
Print format of skbaddr is changed to %px from %p, because we want to use skb address as a quick way to identify a packet. Note, trace ring buffer is only accessible to privileged users, it is safe to use a real kernel address here. Reviewed-by:
-
Qitao Xu authored
The print format of skb adress in tracepoint class net_dev_template is changed to %px from %p, because we want to use skb address as a quick way to identify a packet. Note, trace ring buffer is only accessible to privileged users, it is safe to use a real kernel address here. Reviewed-by:
-
Colin Ian King authored
Shifting the u16 integer oct->pcie_port by CN23XX_PKT_INPUT_CTL_MAC_NUM_POS (29) bits will be promoted to a 32 bit signed int and then sign-extended to a u64. In the cases where oct->pcie_port where bit 2 is set (e.g. 3..7) the shifted value will be sign extended and the top 32 bits of the result will be set. Fix this by casting the u16 values to a u64 before the 29 bit left shift. Addresses-Coverity: ("Unintended sign extension") Fixes: 3451b97c ("liquidio: CN23XX register setup") Signed-off-by: -
Geert Uytterhoeven authored
Making global2 support mandatory removed the Kconfig symbol NET_DSA_MV88E6XXX_GLOBAL2. This symbol also served as an intermediate symbol to make NET_DSA_MV88E6XXX_PTP depend on NET_DSA_MV88E6XXX. With the symbol removed, the user is always asked about PTP support for Marvell 88E6xxx switches, even if the latter support is not enabled. Fix this by reinstating the dependency. Fixes: 63368a74 ("net: dsa: mv88e6xxx: Make global2 support mandatory") Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Signed-off-by:
-
- 14 Jul, 2021 6 commits
-
-
David S. Miller authored
Takashi Iwai says: ==================== r8152: Fix a couple of PM problems it seems that r8152 driver suffers from the deadlock at both runtime and system PM. Formerly, it was seen more often at hibernation resume, but now it's triggered more frequently, as reported in SUSE Bugzilla: https://bugzilla.suse.com/show_bug.cgi?id=1186194 While debugging the problem, I stumbled on a few obvious bugs and here is the results with two patches for addressing the resume problem. *** However, the story doesn't end here, unfortunately, and those patches don't seem sufficing. The rest major problem is that the driver calls napi_disable() and napi_enable() in the PM suspend callbacks. This makes the system stalling at (runtime-)suspend. If we drop napi_disable() and napi_enable() calls in the PM suspend callbacks, it starts working (that was the result in Bugzilla comment 13): https://bugzilla.suse.com/show_bug.cgi?id=1186194#c13 So, my patches aren't enough and we still need to investigate further. It'd be appreciated if anyone can give a fix or a hint for more debugging. The usage of napi_disable() at PM callbacks is unique in this driver and looks rather suspicious to me; but I'm no expert in this area so I might be wrong... ==================== Signed-off-by:
-
Takashi Iwai authored
r8152 driver sets up the MAC address at reset-resume, while rtl8152_set_mac_address() has the temporary autopm get/put. This may lead to a deadlock as the PM lock has been already taken for the execution of the runtime PM callback. This patch adds the workaround to avoid the superfluous autpm when called from rtl8152_reset_resume(). Link: https://bugzilla.suse.com/show_bug.cgi?id=1186194Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
rtl8152_close() takes the refcount via usb_autopm_get_interface() but it doesn't release when RTL8152_UNPLUG test hits. This may lead to the imbalance of PM refcount. This patch addresses it. Link: https://bugzilla.suse.com/show_bug.cgi?id=1186194Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski. "Including fixes from bpf and netfilter. Current release - regressions: - sock: fix parameter order in sock_setsockopt() Current release - new code bugs: - netfilter: nft_last: - fix incorrect arithmetic when restoring last used - honor NFTA_LAST_SET on restoration Previous releases - regressions: - udp: properly flush normal packet at GRO time - sfc: ensure correct number of XDP queues; don't allow enabling the feature if there isn't sufficient resources to Tx from any CPU - dsa: sja1105: fix address learning getting disabled on the CPU port - mptcp: addresses a rmem accounting issue that could keep packets in subflow receive buffers longer than necessary, delaying MPTCP-level ACKs - ip_tunnel: fix mtu calculation for ETHER tunnel devices - do not reuse skbs allocated from skbuff_fclone_cache in the napi skb cache, we'd try to return them to the wrong slab cache - tcp: consistently disable header prediction for mptcp Previous releases - always broken: - bpf: fix subprog poke descriptor tracking use-after-free - ipv6: - allocate enough headroom in ip6_finish_output2() in case iptables TEE is used - tcp: drop silly ICMPv6 packet too big messages to avoid expensive and pointless lookups (which may serve as a DDOS vector) - make sure fwmark is copied in SYNACK packets - fix 'disable_policy' for forwarded packets (align with IPv4) - netfilter: conntrack: - do not renew entry stuck in tcp SYN_SENT state - do not mark RST in the reply direction coming after SYN packet for an out-of-sync entry - mptcp: cleanly handle error conditions with MP_JOIN and syncookies - mptcp: fix double free when rejecting a join due to port mismatch - validate lwtstate->data before returning from skb_tunnel_info() - tcp: call sk_wmem_schedule before sk_mem_charge in zerocopy path - mt76: mt7921: continue to probe driver when fw already downloaded - bonding: fix multiple issues with offloading IPsec to (thru?) bond - stmmac: ptp: fix issues around Qbv support and setting time back - bcmgenet: always clear wake-up based on energy detection Misc: - sctp: move 198 addresses from unusable to private scope - ptp: support virtual clocks and timestamping - openvswitch: optimize operation for key comparison" * tag 'net-5.14-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (158 commits) net: dsa: properly check for the bridge_leave methods in dsa_switch_bridge_leave() sfc: add logs explaining XDP_TX/REDIRECT is not available sfc: ensure correct number of XDP queues sfc: fix lack of XDP TX queues - error XDP TX failed (-22) net: fddi: fix UAF in fza_probe net: dsa: sja1105: fix address learning getting disabled on the CPU port net: ocelot: fix switchdev objects synced for wrong netdev with LAG offload net: Use nlmsg_unicast() instead of netlink_unicast() octeontx2-pf: Fix uninitialized boolean variable pps ipv6: allocate enough headroom in ip6_finish_output2() net: hdlc: rename 'mod_init' & 'mod_exit' functions to be module-specific net: bridge: multicast: fix MRD advertisement router port marking race net: bridge: multicast: fix PIM hello router port marking race net: phy: marvell10g: fix differentiation of 88X3310 from 88X3340 dsa: fix for_each_child.cocci warnings virtio_net: check virtqueue_add_sgs() return value mptcp: properly account bulk freed memory selftests: mptcp: fix case multiple subflows limited by server mptcp: avoid processing packet if a subflow reset mptcp: fix syncookie process if mptcp can not_accept new subflow ... -
Christian Brauner authored
Add a simple helper that filesystems can use in their parameter parser to parse the "source" parameter. A few places open-coded this function and that already caused a bug in the cgroup v1 parser that we fixed. Let's make it harder to get this wrong by introducing a helper which performs all necessary checks. Link: https://syzkaller.appspot.com/bug?id=6312526aba5beae046fdae8f00399f87aab48b12 Cc: Christoph Hellwig <hch@lst.de> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Christian Brauner authored
The following sequence can be used to trigger a UAF: int fscontext_fd = fsopen("cgroup"); int fd_null = open("/dev/null, O_RDONLY); int fsconfig(fscontext_fd, FSCONFIG_SET_FD, "source", fd_null); close_range(3, ~0U, 0); The cgroup v1 specific fs parser expects a string for the "source" parameter. However, it is perfectly legitimate to e.g. specify a file descriptor for the "source" parameter. The fs parser doesn't know what a filesystem allows there. So it's a bug to assume that "source" is always of type fs_value_is_string when it can reasonably also be fs_value_is_file. This assumption in the cgroup code causes a UAF because struct fs_parameter uses a union for the actual value. Access to that union is guarded by the param->type member. Since the cgroup paramter parser didn't check param->type but unconditionally moved param->string into fc->source a close on the fscontext_fd would trigger a UAF during put_fs_context() which frees fc->source thereby freeing the file stashed in param->file causing a UAF during a close of the fd_null. Fix this by verifying that param->type is actually a string and report an error if not. In follow up patches I'll add a new generic helper that can be used here and by other filesystems instead of this error-prone copy-pasta fix. But fixing it in here first makes backporting a it to stable a lot easier. Fixes: 8d2451f4 ("cgroup1: switch to option-by-option parsing") Reported-by: syzbot+283ce5a46486d6acdbaf@syzkaller.appspotmail.com Cc: Christoph Hellwig <hch@lst.de> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@kernel.org> Cc: syzkaller-bugs <syzkaller-bugs@googlegroups.com> Signed-off-by:
-
- 13 Jul, 2021 13 commits
-
-
Vladimir Oltean authored
This was not caught because there is no switch driver which implements the .port_bridge_join but not .port_bridge_leave method, but it should nonetheless be fixed, as in certain conditions (driver development) it might lead to NULL pointer dereference. Fixes: f66a6a69 ("net: dsa: permit cross-chip bridging between all trees in the system") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/hansg/linuxLinus Torvalds authored
Pull vboxsf fixes from Hans de Goede: "This adds support for the atomic_open directory-inode op to vboxsf. Note this is not just an enhancement this also fixes an actual issue which users are hitting, see the commit message of the "boxsf: Add support for the atomic_open directory-inode" patch" * tag 'vboxsf-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/hansg/linux: vboxsf: Add support for the atomic_open directory-inode op vboxsf: Add vboxsf_[create|release]_sf_handle() helpers vboxsf: Make vboxsf_dir_create() return the handle for the created file vboxsf: Honor excl flag to the dir-inode create op
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs zoned mode fixes from David Sterba: - fix deadlock when allocating system chunk - fix wrong mutex unlock on an error path - fix extent map splitting for append operation - update and fix message reporting unusable chunk space - don't block when background zone reclaim runs with balance in parallel * tag 'for-5.14-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: zoned: fix wrong mutex unlock on failure to allocate log root tree btrfs: don't block if we can't acquire the reclaim lock btrfs: properly split extent_map for REQ_OP_ZONE_APPEND btrfs: rework chunk allocation to avoid exhaustion of the system chunk array btrfs: fix deadlock with concurrent chunk allocations involving system chunks btrfs: zoned: print unusable percentage when reclaiming block groups btrfs: zoned: fix types for u64 division in btrfs_reclaim_bgs_work
-
David S. Miller authored
Íñigo Huguet says: ==================== sfc: Fix lack of XDP TX queues A change introduced in commit e26ca4b5 ("sfc: reduce the number of requested xdp ev queues") created a bug in XDP_TX and XDP_REDIRECT because it unintentionally reduced the number of XDP TX queues, letting not enough queues to have one per CPU, which leaded to errors if XDP TX/REDIRECT was done from a high numbered CPU. This patchs make the following changes: - Fix the bug mentioned above - Revert commit 99ba0ea6 ("sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues") which intended to fix a related problem, created by mentioned bug, but it's no longer necessary - Add a new error log message if there are not enough resources to make XDP_TX/REDIRECT work V1 -> V2: keep the calculation of how many tx queues can handle a single event queue, but apply the "max. tx queues per channel" upper limit. V2 -> V3: WARN_ON if the number of initialized XDP TXQs differs from the expected. ==================== Signed-off-by:
-
Íñigo Huguet authored
If it's not possible to allocate enough channels for XDP, XDP_TX and XDP_REDIRECT don't work. However, only a message saying that not enough channels were available was shown, but not saying what are the consequences in that case. The user didn't know if he/she can use XDP or not, if the performance is reduced, or what. Signed-off-by:
Íñigo Huguet <ihuguet@redhat.com> Signed-off-by:
-
Íñigo Huguet authored
Commit 99ba0ea6 ("sfc: adjust efx->xdp_tx_queue_count with the real number of initialized queues") intended to fix a problem caused by a round up when calculating the number of XDP channels and queues. However, this was not the real problem. The real problem was that the number of XDP TX queues had been reduced to half in commit e26ca4b5 ("sfc: reduce the number of requested xdp ev queues"), but the variable xdp_tx_queue_count had remained the same. Once the correct number of XDP TX queues is created again in the previous patch of this series, this also can be reverted since the error doesn't actually exist. Only in the case that there is a bug in the code we can have different values in xdp_queue_number and efx->xdp_tx_queue_count. Because of this, and per Edward Cree's suggestion, I add instead a WARN_ON to catch if it happens again in the future. Note that the number of allocated queues can be higher than the number of used ones due to the round up, as explained in the existing comment in the code. That's why we also have to stop increasing xdp_queue_number beyond efx->xdp_tx_queue_count. Signed-off-by:
-
Íñigo Huguet authored
Fixes: e26ca4b5 sfc: reduce the number of requested xdp ev queues The buggy commit intended to allocate less channels for XDP in order to be more unlikely to reach the limit of 32 channels of the driver. The idea was to use each IRQ/eventqeue for more XDP TX queues than before, calculating which is the maximum number of TX queues that one event queue can handle. For example, in EF10 each event queue could handle up to 8 queues, better than the 4 they were handling before the change. This way, it would have to allocate half of channels than before for XDP TX. The problem is that the TX queues are also contained inside the channel structs, and there are only 4 queues per channel. Reducing the number of channels means also reducing the number of queues, resulting in not having the desired number of 1 queue per CPU. This leads to getting errors on XDP_TX and XDP_REDIRECT if they're executed from a high numbered CPU, because there only exist queues for the low half of CPUs, actually. If XDP_TX/REDIRECT is executed in a low numbered CPU, the error doesn't happen. This is the error in the logs (repeated many times, even rate limited): sfc 0000:5e:00.0 ens3f0np0: XDP TX failed (-22) This errors happens in function efx_xdp_tx_buffers, where it expects to have a dedicated XDP TX queue per CPU. Reverting the change makes again more likely to reach the limit of 32 channels in machines with many CPUs. If this happen, no XDP_TX/REDIRECT will be possible at all, and we will have this log error messages: At interface probe: sfc 0000:5e:00.0: Insufficient resources for 12 XDP event queues (24 other channels, max 32) At every subsequent XDP_TX/REDIRECT failure, rate limited: sfc 0000:5e:00.0 ens3f0np0: XDP TX failed (-22) However, without reverting the change, it makes the user to think that everything is OK at probe time, but later it fails in an unpredictable way, depending on the CPU that handles the packet. It is better to restore the predictable behaviour. If the user sees the error message at probe time, he/she can try to configure the best way it fits his/her needs. At least, he/she will have 2 options: - Accept that XDP_TX/REDIRECT is not available (he/she may not need it) - Load sfc module with modparam 'rss_cpus' with a lower number, thus creating less normal RX queues/channels, letting more free resources for XDP, with some performance penalty. Anyway, let the calculation of maximum TX queues that can be handled by a single event queue, and use it only if it's less than the number of TX queues per channel. This doesn't happen in practice, but could happen if some constant values are tweaked in the future, such us EFX_MAX_TXQ_PER_CHANNEL, EFX_MAX_EVQ_SIZE or EFX_MAX_DMAQ_SIZE. Related mailing list thread: https://lore.kernel.org/bpf/20201215104327.2be76156@carbon/Signed-off-by:
-
Pavel Skripkin authored
fp is netdev private data and it cannot be used after free_netdev() call. Using fp after free_netdev() can cause UAF bug. Fix it by moving free_netdev() after error message. Fixes: 61414f5e ("FDDI: defza: Add support for DEC FDDIcontroller 700 TURBOchannel adapter") Signed-off-by:
Pavel Skripkin <paskripkin@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
In May 2019 when commit 640f763f ("net: dsa: sja1105: Add support for Spanning Tree Protocol") was introduced, the comment that "STP does not get called for the CPU port" was true. This changed after commit 0394a63a ("net: dsa: enable and disable all ports") in August 2019 and went largely unnoticed, because the sja1105_bridge_stp_state_set() method did nothing different compared to the static setup done by sja1105_init_mac_settings(). With the ability to turn address learning off introduced by the blamed commit, there is a new priv->learn_ena port mask in the driver. When sja1105_bridge_stp_state_set() gets called and we are in BR_STATE_LEARNING or later, address learning is enabled or not depending on priv->learn_ena & BIT(port). So what happens is that priv->learn_ena is not being set from anywhere for the CPU port, and the static configuration done by sja1105_init_mac_settings() is being overwritten. To solve this, acknowledge that the static configuration of STP state is no longer necessary because the STP state is being set by the DSA core now, but what is necessary is to set priv->learn_ena for the CPU port. Fixes: 4d942354 ("net: dsa: sja1105: offload bridge port flags to device") Signed-off-by:
-
Vladimir Oltean authored
The point with a *dev and a *brport_dev is that when we have a LAG net device that is a bridge port, *dev is an ocelot net device and *brport_dev is the bonding/team net device. The ocelot net device beneath the LAG does not exist from the bridge's perspective, so we need to sync the switchdev objects belonging to the brport_dev and not to the dev. Fixes: e4bd44e8 ("net: ocelot: replay switchdev events when joining bridge") Signed-off-by:
-
Yajun Deng authored
It has 'if (err >0 )' statement in nlmsg_unicast(), so use nlmsg_unicast() instead of netlink_unicast(), this looks more concise. v2: remove the change in netfilter. Signed-off-by:
Yajun Deng <yajun.deng@linux.dev> Reviewed-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
Xuan Zhuo authored
The problem occurs between dev_get_by_index() and dev_xdp_attach_link(). At this point, dev_xdp_uninstall() is called. Then xdp link will not be detached automatically when dev is released. But link->dev already points to dev, when xdp link is released, dev will still be accessed, but dev has been released. dev_get_by_index() | link->dev = dev | | rtnl_lock() | unregister_netdevice_many() | dev_xdp_uninstall() | rtnl_unlock() rtnl_lock(); | dev_xdp_attach_link() | rtnl_unlock(); | | netdev_run_todo() // dev released bpf_xdp_link_release() | /* access dev. | use-after-free */ | [ 45.966867] BUG: KASAN: use-after-free in bpf_xdp_link_release+0x3b8/0x3d0 [ 45.967619] Read of size 8 at addr ffff00000f9980c8 by task a.out/732 [ 45.968297] [ 45.968502] CPU: 1 PID: 732 Comm: a.out Not tainted 5.13.0+ #22 [ 45.969222] Hardware name: linux,dummy-virt (DT) [ 45.969795] Call trace: [ 45.970106] dump_backtrace+0x0/0x4c8 [ 45.970564] show_stack+0x30/0x40 [ 45.970981] dump_stack_lvl+0x120/0x18c [ 45.971470] print_address_description.constprop.0+0x74/0x30c [ 45.972182] kasan_report+0x1e8/0x200 [ 45.972659] __asan_report_load8_noabort+0x2c/0x50 [ 45.973273] bpf_xdp_link_release+0x3b8/0x3d0 [ 45.973834] bpf_link_free+0xd0/0x188 [ 45.974315] bpf_link_put+0x1d0/0x218 [ 45.974790] bpf_link_release+0x3c/0x58 [ 45.975291] __fput+0x20c/0x7e8 [ 45.975706] ____fput+0x24/0x30 [ 45.976117] task_work_run+0x104/0x258 [ 45.976609] do_notify_resume+0x894/0xaf8 [ 45.977121] work_pending+0xc/0x328 [ 45.977575] [ 45.977775] The buggy address belongs to the page: [ 45.978369] page:fffffc00003e6600 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x4f998 [ 45.979522] flags: 0x7fffe0000000000(node=0|zone=0|lastcpupid=0x3ffff) [ 45.980349] raw: 07fffe0000000000 fffffc00003e6708 ffff0000dac3c010 0000000000000000 [ 45.981309] raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 [ 45.982259] page dumped because: kasan: bad access detected [ 45.982948] [ 45.983153] Memory state around the buggy address: [ 45.983753] ffff00000f997f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 45.984645] ffff00000f998000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.985533] >ffff00000f998080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.986419] ^ [ 45.987112] ffff00000f998100: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.988006] ffff00000f998180: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 45.988895] ================================================================== [ 45.989773] Disabling lock debugging due to kernel taint [ 45.990552] Kernel panic - not syncing: panic_on_warn set ... [ 45.991166] CPU: 1 PID: 732 Comm: a.out Tainted: G B 5.13.0+ #22 [ 45.991929] Hardware name: linux,dummy-virt (DT) [ 45.992448] Call trace: [ 45.992753] dump_backtrace+0x0/0x4c8 [ 45.993208] show_stack+0x30/0x40 [ 45.993627] dump_stack_lvl+0x120/0x18c [ 45.994113] dump_stack+0x1c/0x34 [ 45.994530] panic+0x3a4/0x7d8 [ 45.994930] end_report+0x194/0x198 [ 45.995380] kasan_report+0x134/0x200 [ 45.995850] __asan_report_load8_noabort+0x2c/0x50 [ 45.996453] bpf_xdp_link_release+0x3b8/0x3d0 [ 45.997007] bpf_link_free+0xd0/0x188 [ 45.997474] bpf_link_put+0x1d0/0x218 [ 45.997942] bpf_link_release+0x3c/0x58 [ 45.998429] __fput+0x20c/0x7e8 [ 45.998833] ____fput+0x24/0x30 [ 45.999247] task_work_run+0x104/0x258 [ 45.999731] do_notify_resume+0x894/0xaf8 [ 46.000236] work_pending+0xc/0x328 [ 46.000697] SMP: stopping secondary CPUs [ 46.001226] Dumping ftrace buffer: [ 46.001663] (ftrace buffer empty) [ 46.002110] Kernel Offset: disabled [ 46.002545] CPU features: 0x00000001,23202c00 [ 46.003080] Memory Limit: none Fixes: aa8d3a71 ("bpf, xdp: Add bpf_link-based XDP attachment API") Reported-by:Abaci <abaci@linux.alibaba.com> Signed-off-by:
Xuan Zhuo <xuanzhuo@linux.alibaba.com> Signed-off-by:
Dust Li <dust.li@linux.alibaba.com> Acked-by:
-
Daniel Borkmann authored
During testing of f263a814 ("bpf: Track subprog poke descriptors correctly and fix use-after-free") under various failure conditions, for example, when jit_subprogs() fails and tries to clean up the program to be run under the interpreter, we ran into the following freeze: [...] #127/8 tailcall_bpf2bpf_3:FAIL [...] [ 92.041251] BUG: KASAN: slab-out-of-bounds in ___bpf_prog_run+0x1b9d/0x2e20 [ 92.042408] Read of size 8 at addr ffff88800da67f68 by task test_progs/682 [ 92.043707] [ 92.044030] CPU: 1 PID: 682 Comm: test_progs Tainted: G O 5.13.0-53301-ge6c08cb33a30-dirty #87 [ 92.045542] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1 04/01/2014 [ 92.046785] Call Trace: [ 92.047171] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.047773] ? __bpf_prog_run_args32+0x8b/0xb0 [ 92.048389] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.049019] ? ktime_get+0x117/0x130 [...] // few hundred [similar] lines more [ 92.659025] ? ktime_get+0x117/0x130 [ 92.659845] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.660738] ? __bpf_prog_run_args32+0x8b/0xb0 [ 92.661528] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.662378] ? print_usage_bug+0x50/0x50 [ 92.663221] ? print_usage_bug+0x50/0x50 [ 92.664077] ? bpf_ksym_find+0x9c/0xe0 [ 92.664887] ? ktime_get+0x117/0x130 [ 92.665624] ? kernel_text_address+0xf5/0x100 [ 92.666529] ? __kernel_text_address+0xe/0x30 [ 92.667725] ? unwind_get_return_address+0x2f/0x50 [ 92.668854] ? ___bpf_prog_run+0x15d4/0x2e20 [ 92.670185] ? ktime_get+0x117/0x130 [ 92.671130] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.672020] ? __bpf_prog_run_args32+0x8b/0xb0 [ 92.672860] ? __bpf_prog_run_args64+0xc0/0xc0 [ 92.675159] ? ktime_get+0x117/0x130 [ 92.677074] ? lock_is_held_type+0xd5/0x130 [ 92.678662] ? ___bpf_prog_run+0x15d4/0x2e20 [ 92.680046] ? ktime_get+0x117/0x130 [ 92.681285] ? __bpf_prog_run32+0x6b/0x90 [ 92.682601] ? __bpf_prog_run64+0x90/0x90 [ 92.683636] ? lock_downgrade+0x370/0x370 [ 92.684647] ? mark_held_locks+0x44/0x90 [ 92.685652] ? ktime_get+0x117/0x130 [ 92.686752] ? lockdep_hardirqs_on+0x79/0x100 [ 92.688004] ? ktime_get+0x117/0x130 [ 92.688573] ? __cant_migrate+0x2b/0x80 [ 92.689192] ? bpf_test_run+0x2f4/0x510 [ 92.689869] ? bpf_test_timer_continue+0x1c0/0x1c0 [ 92.690856] ? rcu_read_lock_bh_held+0x90/0x90 [ 92.691506] ? __kasan_slab_alloc+0x61/0x80 [ 92.692128] ? eth_type_trans+0x128/0x240 [ 92.692737] ? __build_skb+0x46/0x50 [ 92.693252] ? bpf_prog_test_run_skb+0x65e/0xc50 [ 92.693954] ? bpf_prog_test_run_raw_tp+0x2d0/0x2d0 [ 92.694639] ? __fget_light+0xa1/0x100 [ 92.695162] ? bpf_prog_inc+0x23/0x30 [ 92.695685] ? __sys_bpf+0xb40/0x2c80 [ 92.696324] ? bpf_link_get_from_fd+0x90/0x90 [ 92.697150] ? mark_held_locks+0x24/0x90 [ 92.698007] ? lockdep_hardirqs_on_prepare+0x124/0x220 [ 92.699045] ? finish_task_switch+0xe6/0x370 [ 92.700072] ? lockdep_hardirqs_on+0x79/0x100 [ 92.701233] ? finish_task_switch+0x11d/0x370 [ 92.702264] ? __switch_to+0x2c0/0x740 [ 92.703148] ? mark_held_locks+0x24/0x90 [ 92.704155] ? __x64_sys_bpf+0x45/0x50 [ 92.705146] ? do_syscall_64+0x35/0x80 [ 92.706953] ? entry_SYSCALL_64_after_hwframe+0x44/0xae [...] Turns out that the program rejection from e411901c ("bpf: allow for tailcalls in BPF subprograms for x64 JIT") is buggy since env->prog->aux->tail_call_reachable is never true. Commit ebf7d1f5 ("bpf, x64: rework pro/epilogue and tailcall handling in JIT") added a tracker into check_max_stack_depth() which propagates the tail_call_reachable condition throughout the subprograms. This info is then assigned to the subprogram's func[i]->aux->tail_call_reachable. However, in the case of the rejection check upon JIT failure, env->prog->aux->tail_call_reachable is used. func[0]->aux->tail_call_reachable which represents the main program's information did not propagate this to the outer env->prog->aux, though. Add this propagation into check_max_stack_depth() where it needs to belong so that the check can be done reliably. Fixes: ebf7d1f5 ("bpf, x64: rework pro/epilogue and tailcall handling in JIT") Fixes: e411901c ("bpf: allow for tailcalls in BPF subprograms for x64 JIT") Co-developed-by:
Maciej Fijalkowski <maciej.fijalkowski@intel.com> Link: https://lore.kernel.org/bpf/618c34e3163ad1a36b1e82377576a6081e182f25.1626123173.git.daniel@iogearbox.net
-
- 12 Jul, 2021 1 commit
-
-
Christoph Hellwig authored
No need to give up the original sd minor even with this option, and if we did we'd also need to fix the number of minors for this configuration to actually work. Fixes: 7c3f828b ("block: refactor device number setup in __device_add_disk") Reported-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Christoph Hellwig <hch@lst.de> Tested-by:
-
