- 30 Jul, 2018 2 commits
-
-
Sergei Maksimenko authored
Implement set_power_mgmt() callback that forwards power saving settings to the device firmware. Signed-off-by:
Sergei Maksimenko <smaksimenko@quantenna.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org>
-
Kalle Valo authored
Merge tag 'iwlwifi-next-for-kalle-2018-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next First batch of iwlwifi patches for 4.19 * Implement 802.11ax D2.0; * Changes in the base code to support the new 22560 devices; * Support for the new 22560 device family;
-
- 26 Jul, 2018 19 commits
-
-
Golan Ben Ami authored
The smallest rb size supported today is 4k rx buffers. 22560 devices use 2k rxb's, so allow using 2k buffers. Signed-off-by:
Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com>
-
Golan Ben Ami authored
In 22560 devices the firmware will do all the hw configurations, but that's not ready yet. Update the correct registers in the driver until the FW is ready and does it by itself. Signed-off-by:
Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com>
-
Golan Ben Ami authored
22560 devices RFH uses different structures, which act similar to the legacy rxq management lists - free and used list. The iwl_rx_transfer_desc struct is part of the free list, and consists of pointers to the empty rb's the driver wants to pass to the fw. The iwl_rx_completion_desc struct is part of the used list, and consists of pointers to the buffer the fw filled up with new rx, both commands and data, for the host. Signed-off-by:
Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com>
-
Golan Ben Ami authored
22560 devices use a new tx cmd api. Update the code to use the new api. Signed-off-by:
Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com>
-
Golan Ben Ami authored
22560 devices tfd queue max size is 2^16. Allow a configurable max size in the driver for supporting different devices. Signed-off-by:
Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com>
-
Golan Ben Ami authored
Nowadays, the tfd queue max size is 2^8, and the reserved size in the command header sequence field for the tfd entry index is 8 bits, allowing an injective function from the hw pointers to the tfd entry index in the sequence field. In 22560 devices the tfd queue max size is 2^16, meaning that the hw pointers are 16 bit long (allowing to point to each entry in the tfd queue). However, the reserved space in the sequence field for the tfd entry doesn't change, and we are limited to 8 bit. This requires cancelling the injective function from hw pointer to tfd entry in the sequence number. Use iwl_pcie_get_cmd_index to wrap the hw pointer's to the n_window size, which is maximum 256 in tx queues, and so, keep the injective function between the window wrapped hw pointers to tfd entry index in the sequence. Signed-off-by:
Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com>
-
Golan Ben Ami authored
In 22560 devices the ROM sendis an interrupt to the host once the IML reading is done. Handle this interrupt, and indicate sw error in case the value is fail. Additionally, the cause for sw error in 22560 devices have been changed, so update the cause list. Signed-off-by:
Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com>
-
Golan Ben Ami authored
In 22560 devices we can start debug using context info gen3. Configure the fw to start collecting logs to the dram before init. Signed-off-by:
Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com>
-
Golan Ben Ami authored
For devices which use the image loader image, the length of the frame must be updated in the byte count in bytes, and not dwords as today. Avoid dividing the input length by 4. Signed-off-by:
Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com>
-
Golan Ben Ami authored
Context information structure was added to 22000 devices for firmware self init. In the next generation of devices the context information changes significantly, and the original context information is divided roughly to three data structures: context information gen3, prph information and prph scratch. In addition, the init flow changes so the firmware is loaded by the IML, and so we must allocate the IML on the DRAM and give the ROM the IML's address before kicking the firmware's self init. Signed-off-by:
Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com>
-
Golan Ben Ami authored
The hw now refers to two new blocks: * rx tr tail - The Tail index on the free buffers queue TR, which is update by the device after reading the free buffer from the tr. * rx cr tail - Updated by the driver when completing processing a new completion descriptor in the cr. Add these two new struct to the rxq, allocate and free them when needed. In addition, the register for rx write pointer had been changed to HBUS_TARG_WRPTR. The way to differentiate tx from rx is the queue number. TX range is 0-511, and RX's is 512-527. Signed-off-by:
Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com>
-
Golan Ben Ami authored
Device 22560 have many different hw and sw features than 22000 family, so introduce a new family of devices - 22560. Signed-off-by:
Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com>
-
Golan Ben Ami authored
Different device families may have different flag values for passing a message to the fw (i.e. SW_RESET). In order to keep the code readable, and avoid conditioning upon the family, store a value for each flag, which indicates the bit that needs to be enabled. Additionally, support 22560 device csr flags and addresses. Signed-off-by:
Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com>
-
Luca Coelho authored
Add support for the new 22560 family of devices and, while at it, reorganize the 22000 family so it fits better with the new one. Signed-off-by:
Golan Ben Ami <golan.ben.ami@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com>
-
Johannes Berg authored
Our current HE devices don't support BlockAck with the large bitmap, so can't do TX aggregation with 256 frames. Restrict to the lower HT size. Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Luca Coelho <luciano.coelho@intel.com>
-
Luca Coelho authored
Add HE information to the radiotap data. Signed-off-by:
Luca Coelho <luciano.coelho@intel.com>
-
Luca Coelho authored
Add a module parameter to disable 802.11ax features in supported devices. This is useful for testing or if there are interoperability issues with some APs. Signed-off-by:
Luca Coelho <luciano.coelho@intel.com>
-
Luca Coelho authored
Add support for the HE in the iwlwifi driver conforming with P802.11ax_D2.0. Signed-off-by:
Luca Coelho <luciano.coelho@intel.com>
-
Luca Coelho authored
Add the FW API definitions for HE support. Signed-off-by:
Luca Coelho <luciano.coelho@intel.com>
-
- 25 Jul, 2018 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/ath.gitKalle Valo authored
ath.git patches for 4.19. Major changes: wcn36xx * fix WEP in client mode wil6210 * add support for Talyn-MB (Talyn ver 2.0) device * add support for enhanced DMA firmware feature
-
- 24 Jul, 2018 18 commits
-
-
Nishanth Devarajan authored
Skbprio (SKB Priority Queue) is a queueing discipline that prioritizes packets according to their skb->priority field. Under congestion, already-enqueued lower priority packets will be dropped to make space available for higher priority packets. Skbprio was conceived as a solution for denial-of-service defenses that need to route packets with different priorities as a means to overcome DoS attacks. v5 *Do not reference qdisc_dev(sch)->tx_queue_len for setting limit. Instead set default sch->limit to 64. v4 *Drop Documentation/networking/sch_skbprio.txt doc file to move it to tc man page for Skbprio, in iproute2. v3 *Drop max_limit parameter in struct skbprio_sched_data and instead use sch->limit. *Reference qdisc_dev(sch)->tx_queue_len only once, during initialisation for qdisc (previously being referenced every time qdisc changes). *Move qdisc's detailed description from in-code to Documentation/networking. *When qdisc is saturated, enqueue incoming packet first before dequeueing lowest priority packet in queue - improves usage of call stack registers. *Introduce and use overlimit stat to keep track of number of dropped packets. v2 *Use skb->priority field rather than DS field. Rename queueing discipline as SKB Priority Queue (previously Gatekeeper Priority Queue). *Queueing discipline is made classful to expose Skbprio's internal priority queues. Signed-off-by:
Nishanth Devarajan <ndev2021@gmail.com> Reviewed-by:
Sachin Paryani <sachin.paryani@gmail.com> Reviewed-by:
Cody Doucette <doucette@bu.edu> Reviewed-by:
Michel Machado <michel@digirati.com.br> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Heiner Kallweit authored
Certain PHY's have issues when operating in GBit slave mode and can be forced to master mode. Examples are RTL8211C, also the Micrel PHY driver has a DT setting to force master mode. If two such chips are link partners the autonegotiation will fail. Standard defines a self-clearing on read, latched-high bit to indicate this error. Check this bit to inform the user. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Stephen Hemminger says: ==================== net whitespace cleanups Ran script that I use to check for trailing whitespace and blank lines at end of files across all files in net/ directory. These are errors that checkpatch reports and git flags. These are the resulting fixes broken up mostly by subsystem. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Several files have extra line at end of file. Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Remove trailing whitespace and extra lines at EOF Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Remove blank line at EOF and trailing whitespace. Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Stephen Hemminger authored
Remove trailing whitespace and blank lines at EOF Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-