- 12 Sep, 2009 40 commits
-
-
Beholder Intl. Ltd. Dmitry Belimov authored
Define correct tuner in config. Radio now works fine Signed-off-by:
Beholder Intl. Ltd. Dmitry Belimov <d.belimov@gmail.com> Signed-off-by:
Douglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Tobias Lorenz authored
The structure and comments of the I2C part have been adopted to fit to the USB part. Some additional cleanups and precisements have been made to the version detection and checking functionality to clearly separate HW/SW/FW version. Signed-off-by:
Tobias Lorenz <tobias.lorenz@gmx.net> Signed-off-by:
-
Joonyoung Shim authored
This patch supports i2c interface of si470x. The i2c specific part exists in radio-si470x-i2c.c file and the common part uses radio-si470x-common.c file. The '#if defined' is inserted inevitably because of parts used only si470x usb in the common file. The current driver version doesn't support the RDS. Signed-off-by:
Joonyoung Shim <jy0922.shim@samsung.com> Signed-off-by:
-
Joonyoung Shim authored
The si470x_disconnect_check is function to check disconnect state of radio in common file. The function is implemented in each interface file. Signed-off-by:
-
Joonyoung Shim authored
This patch is for using dev_* macro instead of printk. Signed-off-by:
-
Joonyoung Shim authored
This patch is a preceding work to add the i2c interface of si470x. The si470x directory includes a common file and usb specific file and header file. The part unrelated with usb interface and i2c interface exists in radio-si470x-common.c file, and The usb specific part exists in radio-si470x-usb.c file. Signed-off-by:
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Pete Hildebrandt authored
This patch adds support for the STK7700D USB-DVB-Device. lsusb identifies it as: idVendor 0x1164 YUAN High-Tech Development Co., Ltd idProduct 0x1efc iProduct 2 STK7700D The device is build into a Samsung R55-T5500 notebook. Signed-off-by:
Pete Hildebrandt <send2ph@googlemail.com> Signed-off-by:
Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by:
-
Eberhard Mattes authored
cinergyInitialize param.flags. Signed-off-by:
Eberhard Mattes <eberhard.mattes@web.de> Signed-off-by:
Thierry MERLE <thierry.merle@free.fr> Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
Jean-Francois Moine <moinejf@free.fr> Signed-off-by:
-
Marton Nemeth authored
The vidioc_s_std() is not necessary when vdev->tvnorms == 0. Signed-off-by:
Marton Nemeth <nm127@freemail.hu> Signed-off-by:
-
Laurent Pinchart authored
Restructure the UVC descriptors parsing code to handle multiple streaming interfaces. The driver now creates a uvc_video_chain instance for each chain detected in the UVC control interface descriptors, and tries to register one video device per streaming endpoint. Signed-off-by:
Laurent Pinchart <laurent.pinchart@skynet.be> Signed-off-by:
-
Laurent Pinchart authored
As a first step towards multiple streaming interfaces support, reorganize the driver's data structures to cleanly separate video control and video streaming data. Signed-off-by:
-
Mauro Carvalho Chehab authored
V4L2 API (chapter 1.5) states that: Drivers must implement all input ioctls when the device has one or more inputs, all output ioctls when the device has one or more outputs. When the device has any audio inputs or outputs the driver must set the V4L2_CAP_AUDIO flag in the struct v4l2_capability returned by the VIDIOC_QUERYCAP ioctl. So, devices without audio input should return -EINVAL. Signed-off-by: -
Jiri Slaby authored
There are many lock imbalances in this driver. Fix all found. Signed-off-by:
Jiri Slaby <jirislaby@gmail.com> Signed-off-by:
-
Jiri Slaby authored
There seems to be one superfluos unlock in a poll function. Remove it. Signed-off-by:
-
Mhayk Whandson authored
Fixed the c-qcam source code path in the linux kernel tree. Signed-off-by:
Mhayk Whandson <eu@mhayk.com.br> Signed-off-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Oliver Neukum authored
The irq handler will touch memory. Even in the error case some URBs may complete. Thus no memory must be kfreed before all URBs are killed. Signed-off-by:
Oliver Neukum <oliver@neukum.org> Acked-by:
Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by:
-
Andy Walls authored
This patch adds support for Zilog Z8F0811 IR transceiver chips on CX2341[68] based boards to ir-kbd-i2c for both the old i2c binding model and the new i2c binding model. Signed-off-by:
Andy Walls <awalls@radix.net> Reviewed-by:
Jean Delvare <khali@linux-fr.org> Signed-off-by:
-
Andy Walls authored
This patch add support to the cx18 driver for setting up the Z8F0811/Hauppauge IR Tx/Rx chip with the i2c binding model in newer kernels. Signed-off-by:
-
Andy Walls authored
This patch augments the init data passed by bridge drivers to ir-kbd-i2c, so that the ir_type can be set explicitly, and so ir-kbd-i2c internal get_key functions can be reused without requiring symbols from ir-kbd-i2c in the bridge driver. Signed-off-by:
-
Jean Delvare authored
Functions which are referenced by their address can't be inlined by definition. Signed-off-by:
-
Michael Krufky authored
The au0828-dvb driver uses bulk usb transfers for digital transport, but the debug reports, "iso xfer already running!\n". Fix this to report bulk instead of isoc. Signed-off-by:
Michael Krufky <mkrufky@kernellabs.com> Signed-off-by:
-
Jean-Francois Moine authored
This prevents a loop if a permanent error occurs in usb_set_interface(). Signed-off-by:
-
Hans de Goede authored
Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Denis Loginov authored
Signed-off-by:
Denis Loginov <dinvlad@gmail.com> Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
Jean-Francois Moine authored
Also, H/V flip default values adjusted according to the webcam IDs. Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
-
AceLan Kao authored
The patches gspca - vc032x: Add resolution 1280x1024 for sensor mi1310_soc. gspca - vc032x: Webcam 041e:405b added and mi1310_soc updated. will make the preview function not work, so I disable the 1280x1024 resolution and revert back to the origin mi1310_soc settings. And, using USB snoop tool on Windows to get the correct i2c commands to turn on/off the LED flash. Signed-off-by:
AceLan Kao <acelan.kao@canonical.com> Signed-off-by:
-
Brian Johnson authored
* use i2c_w instead of reg_w * return error on failure * read the correct number of bytes Signed-off-by:
Brian Johnson <brijohn@gmail.com> Signed-off-by:
-
Steven Toth authored
After the i2c subdev changes the ordering of initialization changed, causing a total loss of previous GPIO settings and a loss of DTV. The generic firmware loading routine has now changed to preserve GPIO values if the device is cx23885 based (safety) and I've moved the GPIO configuration from probe() into the cx23885 init func which is a little clearer and fixes the bug. Tested-by:
Sohail Syyed <linuxtv@hubstar.net> Reviewed-by:
Steven Toth <stoth@kernellabs.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
Even devices without ac97 needs to call analog audio setup function, to properly set xclk and mute/unmute. Thanks to Angelo Cano <acano@fastmail.fm> for reporting and testing it. Signed-off-by: -
Jean Delvare authored
There is no point in defining I2C adapter IDs when no code is using them. As this field might go away in the future, stop using it when we don't need to. Signed-off-by:
-
Jan Nikitenko authored
Replace printing to magically sized temporary buffer with use of KERN_CONT for continual printing of eeprom registers dump. Since deb_info is defined as dprintk, which is conditionally defined to printk without additional parameters, meaning that deb_info is equivalent to direct printk (without adding KERN_ facility), we can use KERN_DEBUG and KERN_CONT in there, eliminating the need for sprintf into temporary buffer with not easily readable/magical size. Though it's strange, that deb_info definition uses printk without KERN_ facility and callers don't use it either. Signed-off-by:
Jan Nikitenko <jan.nikitenko@gmail.com> Signed-off-by:
-
Andy Walls authored
Remove the subdev_s_std() method from the GPIO subdev. It appears it was used in the past to effect the switch back from radio mode to tuner mode, but it had a side effect that is improper and against the V4L2 spec, when you were not in radio mode. Whenever the video stanadrd was changed, the GPIO audio mux was set back to the tuner audio input, even if you were set to a Line In input. Thanks to Ravi A. for doing the troubleshooting to point me right to the problem. Reported-by:
Ravi A <asvravi@gmail.com> Signed-off-by:
-
Andy Walls authored
Tested-by:
-
Andy Walls authored
Signed-off-by:
-
Igor M. Liplianin authored
Create card parameters array in SDMC DM1105 driver. It is useful for cards with the same pci id, but different tuners, lnb power control circuits, etc. Signed-off-by:
Igor M. Liplianin <liplianin@me.by> Signed-off-by:
-
Laurent Pinchart authored
At least one MT6227 model crashes when receiving a GET_DEF request on the video probe control. As the various models can't be told apart based on the descriptors, add a PROBE_DEF quirk to avoid sending the GET_DEF request and enable the quirk for all models. Signed-off-by:
-
