- 01 Jul, 2020 1 commit
-
-
Kathiravan T authored
IPQ6018 SoC uses the PMIC MP5496. SMPA2 and LDOA2 regulator controls the APSS and SDCC voltage scaling respectively. Add support for the same. Signed-off-by: Kathiravan T <kathirav@codeaurora.org> Link: https://lore.kernel.org/r/1592889472-6843-5-git-send-email-kathirav@codeaurora.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 26 Jun, 2020 9 commits
-
-
Lee Jones authored
This was an upstreaming error. Remove it as it's not to be used. Fixes the following W=1 kernel build warning: drivers/regulator/qcom_smd-regulator.c:477:36: warning: ‘pmi8994_boost’ defined but not used [-Wunused-const-variable=] Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: linux-arm-msm@vger.kernel.org Link: https://lore.kernel.org/r/20200626065738.93412-10-lee.jones@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
Lee Jones authored
W=1 kernel builds report a lack of descriptions for various function arguments. In reality they are documented, but the formatting was not as expected '@.*:'. Instead, some weird arg identifiers were used. This change fixes the following warnings: drivers/regulator/wm8400-regulator.c:243: warning: Function parameter or member 'dev' not described in 'wm8400_register_regulator' drivers/regulator/wm8400-regulator.c:243: warning: Function parameter or member 'reg' not described in 'wm8400_register_regulator' drivers/regulator/wm8400-regulator.c:243: warning: Function parameter or member 'initdata' not described in 'wm8400_register_regulator' Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com> Cc: patches@opensource.cirrus.com Link: https://lore.kernel.org/r/20200626065738.93412-9-lee.jones@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
Lee Jones authored
'rid' is declared as unsigned int, so there is little point checking for <0. Removing these checks fixes the following W=1 warnings: drivers/regulator/tps65218-regulator.c: In function ‘tps65218_pmic_set_suspend_enable’: drivers/regulator/tps65218-regulator.c:131:10: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] 131 | if (rid < TPS65218_DCDC_1 || rid > TPS65218_LDO_1) | ^ drivers/regulator/tps65218-regulator.c: In function ‘tps65218_pmic_set_suspend_disable’: drivers/regulator/tps65218-regulator.c:144:10: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] 144 | if (rid < TPS65218_DCDC_1 || rid > TPS65218_LDO_1) | ^ Signed-off-by: Lee Jones <lee.jones@linaro.org> Cc: Keerthy <j-keerthy@ti.com> Cc: Tero Kristo <t-kristo@ti.com> Cc: Dave Gerlach <d-gerlach@ti.com> Cc: linux-omap@vger.kernel.org Link: https://lore.kernel.org/r/20200626065738.93412-8-lee.jones@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
Lee Jones authored
Until now the aforementioned return value has been ignored. Previous and current calls to tps65217_reg_read() return instantly when the value is not 0, so let's do that. Fixes the following W=1 warning: drivers/regulator/tps65217-regulator.c: In function ‘tps65217_regulator_probe’: drivers/regulator/tps65217-regulator.c:227:9: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] 227 | int i, ret; | ^~~ Signed-off-by: Lee Jones <lee.jones@linaro.org> Cc: Russ Dill <Russ.Dill@ti.com> Cc: Keerthy <j-keerthy@ti.com> Cc: AnilKumar Ch <anilkumar@ti.com> Cc: linux-omap@vger.kernel.org Link: https://lore.kernel.org/r/20200626065738.93412-7-lee.jones@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
Lee Jones authored
'rid' is declared as unsigned int, so there is little point checking for <0. Removing these checks fixes the following W=1 warnings: drivers/regulator/tps65217-regulator.c: In function ‘tps65217_pmic_set_suspend_enable’: drivers/regulator/tps65217-regulator.c:127:10: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] 127 | if (rid < TPS65217_DCDC_1 || rid > TPS65217_LDO_4) | ^ drivers/regulator/tps65217-regulator.c: In function ‘tps65217_pmic_set_suspend_disable’: drivers/regulator/tps65217-regulator.c:140:10: warning: comparison of unsigned expression < 0 is always false [-Wtype-limits] 140 | if (rid < TPS65217_DCDC_1 || rid > TPS65217_LDO_4) | ^ Signed-off-by: Lee Jones <lee.jones@linaro.org> Cc: Russ Dill <Russ.Dill@ti.com> Cc: Keerthy <j-keerthy@ti.com> Cc: AnilKumar Ch <anilkumar@ti.com> Cc: linux-omap@vger.kernel.org Link: https://lore.kernel.org/r/20200626065738.93412-6-lee.jones@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
Lee Jones authored
In kerneldoc format, data structures have to start with 'struct' else the kerneldoc tooling/parsers/validators get confused. Fixes the following W=1 kernel build warning: drivers/regulator/stpmic1_regulator.c:25: warning: cannot understand function prototype: 'struct stpmic1_regulator_cfg ' Signed-off-by: Lee Jones <lee.jones@linaro.org> Cc: Pascal Paillet <p.paillet@st.com> Link: https://lore.kernel.org/r/20200626065738.93412-5-lee.jones@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
Lee Jones authored
This particular comment doesn't have anything to do with documenting functions or data structures. Instead it is used as a section header. Fixes W=1 warning: drivers/regulator/pwm-regulator.c:55: warning: Function parameter or member 'rdev' not described in 'pwm_regulator_init_state' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200626065738.93412-4-lee.jones@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
Lee Jones authored
W=1 kernel builds report a lack of descriptions for various enum properties and function arguments. In reality they are documented, but the formatting was not as expected '@.*:'. Instead, some weird arg identifiers were used or none at all. This change fixes the following warnings: drivers/regulator/qcom-rpmh-regulator.c:33: warning: Enum value 'VRM' not described in enum 'rpmh_regulator_type' drivers/regulator/qcom-rpmh-regulator.c:33: warning: Enum value 'XOB' not described in enum 'rpmh_regulator_type' drivers/regulator/qcom-rpmh-regulator.c:416: warning: Function parameter or member 'vreg' not described in 'rpmh_regulator_init_vreg' drivers/regulator/qcom-rpmh-regulator.c:416: warning: Function parameter or member 'dev' not described in 'rpmh_regulator_init_vreg' drivers/regulator/qcom-rpmh-regulator.c:416: warning: Function parameter or member 'node' not described in 'rpmh_regulator_init_vreg' drivers/regulator/qcom-rpmh-regulator.c:416: warning: Function parameter or member 'pmic_id' not described in 'rpmh_regulator_init_vreg' drivers/regulator/qcom-rpmh-regulator.c:416: warning: Function parameter or member 'pmic_rpmh_data' not described in 'rpmh_regulator_init_vreg' Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: linux-arm-msm@vger.kernel.org Link: https://lore.kernel.org/r/20200626065738.93412-3-lee.jones@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
Lee Jones authored
max8998_get_current_limit() is only used via the .get_current_limit, so it doesn't need to be publicly supported, or to have its own external prototype. Instead, we'll make it static. Fixes the following W=1 warning: drivers/regulator/max8998.c:418:5: warning: no previous prototype for ‘max8998_get_current_limit’ [-Wmissing-prototypes] 418 | int max8998_get_current_limit(struct regulator_dev *rdev) | ^~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Lee Jones <lee.jones@linaro.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Link: https://lore.kernel.org/r/20200626065738.93412-2-lee.jones@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 25 Jun, 2020 7 commits
-
-
Lee Jones authored
Nothing about this comment identifies it as a kerneldoc header. It's missing all of it's function argument descriptions and the correct function header. Fixes the following W=1 warning(s): drivers/regulator/max14577-regulator.c:166: warning: Function parameter or member 'max14577' not described in 'max14577_get_regma drivers/regulator/max14577-regulator.c:166: warning: Function parameter or member 'reg_id' not described in 'max14577_get_regmap' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200625163614.4001403-11-lee.jones@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
Lee Jones authored
Nothing about this comment identifies it as a kerneldoc header. They're missing all of their struct's property descriptions and the correct 'struct *' header. Fixes the following W=1 warning(s): drivers/regulator/cpcap-regulator.c:99: warning: cannot understand function prototype: 'struct cpcap_regulator ' drivers/regulator/cpcap-regulator.c:337: warning: cannot understand function prototype: 'const struct cpcap_regulator omap4_regulators[] = ' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200625163614.4001403-9-lee.jones@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
Lee Jones authored
It's okay to not check the return value that you're not conserned about, however it is not okay to assign a variable and not check or use the result. Fixes W=1 warnings(s): drivers/regulator/cpcap-regulator.c:172:13: warning: variable ‘ignore’ set but not used [-Wunused-but-set-variable] 172 | int error, ignore; | ^~~~~~ drivers/regulator/cpcap-regulator.c: In function ‘cpcap_regulator_disable’: drivers/regulator/cpcap-regulator.c:196:13: warning: variable ‘ignore’ set but not used [-Wunused-but-set-variable] 196 | int error, ignore; | ^~~~~~ Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200625163614.4001403-8-lee.jones@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
Lee Jones authored
Kerneldoc expects function arguments to be in the format '@.*:'. If this format is not followed the kerneldoc tooling/parsers/validators get confused. Fixes the following W=1 warning(s): drivers/regulator/wm8350-regulator.c:1234: warning: Function parameter or member 'wm8350' not described in 'wm8350_register_led' drivers/regulator/wm8350-regulator.c:1234: warning: Function parameter or member 'lednum' not described in 'wm8350_register_led' drivers/regulator/wm8350-regulator.c:1234: warning: Function parameter or member 'dcdc' not described in 'wm8350_register_led' drivers/regulator/wm8350-regulator.c:1234: warning: Function parameter or member 'isink' not described in 'wm8350_register_led' drivers/regulator/wm8350-regulator.c:1234: warning: Function parameter or member 'pdata' not described in 'wm8350_register_led' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200625163614.4001403-7-lee.jones@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
Lee Jones authored
Used primarily for the AB8540 which lost support in early 2018. It is now deemed safe to remove this legacy data structure. Also fixes W=1 issue: drivers/regulator/ab8500.c:88: warning: Function parameter or member 'expand_register' not described in 'ab8500_regulator_info' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200625163614.4001403-6-lee.jones@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
Lee Jones authored
There isn't any code present within the current kernel to override this 'weak' function. Besides returning '0', which is never checked anyway, the whole function appears to be superfluous. Consequently fixes W=1 warning: drivers/regulator/dbx500-prcmu.c:113:27: warning: no previous prototype for ‘dbx500_regulator_testcase’ [-Wmissing-prototypes] 113 | int __attribute__((weak)) dbx500_regulator_testcase( | ^~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200625163614.4001403-5-lee.jones@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
Lee Jones authored
regulator_suspend_enable(), regulator_suspend_disable() and regulator_set_suspend_voltage() are all exported members of the API, but are all missing prototypes. Fixes the following W=1 warning(s): drivers/regulator/core.c:3805:5: warning: no previous prototype for ‘regulator_suspend_enable’ [-Wmissing-prototypes] 3805 | int regulator_suspend_enable(struct regulator_dev *rdev, | ^~~~~~~~~~~~~~~~~~~~~~~~ drivers/regulator/core.c:3812:5: warning: no previous prototype for ‘regulator_suspend_disable’ [-Wmissing-prototypes] 3812 | int regulator_suspend_disable(struct regulator_dev *rdev, | ^~~~~~~~~~~~~~~~~~~~~~~~~ drivers/regulator/core.c:3851:5: warning: no previous prototype for ‘regulator_set_suspend_voltage’ [-Wmissing-prototypes] 3851 | int regulator_set_suspend_voltage(struct regulator *regulator, int min_uV, | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20200625163614.4001403-2-lee.jones@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 23 Jun, 2020 1 commit
-
-
Robin Gong authored
Checking for 'ramp_delay = 0' to avoid Coverity warning report. Signed-off-by: Robin Gong <yibin.gong@nxp.com> Link: https://lore.kernel.org/r/1592920870-12693-1-git-send-email-yibin.gong@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 18 Jun, 2020 5 commits
-
-
Rikard Falkeborn authored
These are not modified so make them const to allow the compiler to put them in read-only memory. Before: text data bss dec hex filename 13114 8596 0 21710 54ce drivers/regulator/max8997-regulator.o After: text data bss dec hex filename 14038 7672 0 21710 54ce drivers/regulator/max8997-regulator.o Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20200617223247.25566-6-rikard.falkeborn@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Rikard Falkeborn authored
These are not modified so make them const to allow the compiler to put them in read-only memory. Before: text data bss dec hex filename 2753 7328 0 10081 2761 drivers/regulator/max8907-regulator.o After: text data bss dec hex filename 9405 684 0 10089 2769 drivers/regulator/max8907-regulator.o Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20200617223247.25566-5-rikard.falkeborn@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Rikard Falkeborn authored
ltc3676_regulators is not modified and can be made const to allow the compiler to put it in read-only memory. Before: text data bss dec hex filename 4361 2064 8 6433 1921 drivers/regulator/ltc3676.o After: text data bss dec hex filename 6121 304 8 6433 1921 drivers/regulator/ltc3676.o Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20200617223247.25566-4-rikard.falkeborn@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Rikard Falkeborn authored
cpcap_regulator_ops is not modified and can be made const to allow the compiler to put it in read-only memory. Before: text data bss dec hex filename 14472 236 0 14708 3974 drivers/regulator/cpcap-regulator.o After: text data bss dec hex filename 14604 104 0 14708 3974 drivers/regulator/cpcap-regulator.o Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20200617223247.25566-3-rikard.falkeborn@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Rikard Falkeborn authored
anatop_core_rops is not modified and can therefore be made const which allows the compiler to put it in read-only memory. Before: text data bss dec hex filename 4502 412 0 4914 1332 drivers/regulator/anatop-regulator.o After: text data bss dec hex filename 4634 280 0 4914 1332 drivers/regulator/anatop-regulator.o Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20200617223247.25566-2-rikard.falkeborn@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 15 Jun, 2020 8 commits
-
-
Mark Brown authored
Merge series "Add support for voltage regulator on ChromeOS EC." from Pi-Hsun Shih <pihsun@chromium.org>: Add support for controlling voltage regulator that is connected and controlled by ChromeOS EC. Kernel controls these regulators through newly added EC host commands. Changes from v5: * Move new host command to a separate patch. * Use devm_regulator_register. * Address review comments. Changes from v4: * Change compatible name from regulator-cros-ec to cros-ec-regulator. Changes from v3: * Fix dt bindings file name. * Remove check around CONFIG_OF in driver. * Add new host commands to cros_ec_trace. * Address review comments. Changes from v2: * Add 'depends on OF' to Kconfig. * Add Kconfig description about compiling as module. Changes from v1: * Change compatible string to google,regulator-cros-ec. * Use reg property in device tree. * Change license for dt binding according to checkpatch.pl. * Address comments on code styles. Pi-Hsun Shih (3): dt-bindings: regulator: Add DT binding for cros-ec-regulator platform/chrome: cros_ec: Add command for regulator control. regulator: Add driver for cros-ec-regulator .../regulator/google,cros-ec-regulator.yaml | 51 ++++ drivers/platform/chrome/cros_ec_trace.c | 5 + drivers/regulator/Kconfig | 10 + drivers/regulator/Makefile | 1 + drivers/regulator/cros-ec-regulator.c | 257 ++++++++++++++++++ .../linux/platform_data/cros_ec_commands.h | 82 ++++++ 6 files changed, 406 insertions(+) create mode 100644 Documentation/devicetree/bindings/regulator/google,cros-ec-regulator.yaml create mode 100644 drivers/regulator/cros-ec-regulator.c base-commit: b791d1bd -- 2.27.0.290.gba653c62da-goog
-
Kieran Bingham authored
The word 'descriptor' is misspelled throughout the tree. Fix it up accordingly: decriptors -> descriptors Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Link: https://lore.kernel.org/r/20200609124610.3445662-10-kieran.bingham+renesas@ideasonboard.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Kieran Bingham authored
decriptor -> descriptor. Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com> Link: https://lore.kernel.org/r/20200609124610.3445662-17-kieran.bingham+renesas@ideasonboard.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Pi-Hsun Shih authored
Add driver for cros-ec-regulator, representing a voltage regulator that is connected and controlled by ChromeOS EC, and is controlled by kernel with EC host commands. Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org> Reviewed-by: Prashant Malani <pmalani@chromium.org> Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Link: https://lore.kernel.org/r/20200612040526.192878-4-pihsun@chromium.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
Pi-Hsun Shih authored
Add host commands for voltage regulator control through ChromeOS EC. Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org> Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Link: https://lore.kernel.org/r/20200612040526.192878-3-pihsun@chromium.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
Pi-Hsun Shih authored
Add DT binding documentation for cros-ec-regulator, a voltage regulator controlled by ChromeOS EC. Signed-off-by: Pi-Hsun Shih <pihsun@chromium.org> Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Link: https://lore.kernel.org/r/20200612040526.192878-2-pihsun@chromium.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
Mark Brown authored
-
Robin Gong authored
PFUZE100_SWB_REG is not proper for sw1a/sw2, because enable_mask/enable_reg is not correct. On PFUZE3000, sw1a/sw2 should be the same as sw1a/sw2 on pfuze100 except that voltages are not linear, so add new PFUZE3000_SW_REG and pfuze3000_sw_regulator_ops which like the non-linear PFUZE100_SW_REG and pfuze100_sw_regulator_ops. Fixes: 1dced996 ("regulator: pfuze100: update voltage setting for pfuze3000 sw1a") Reported-by: Christophe Meynard <Christophe.Meynard@ign.fr> Signed-off-by: Robin Gong <yibin.gong@nxp.com> Link: https://lore.kernel.org/r/1592171648-8752-1-git-send-email-yibin.gong@nxp.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 14 Jun, 2020 4 commits
-
-
Linus Torvalds authored
-
git://github.com/micah-morton/linuxLinus Torvalds authored
Pull SafeSetID update from Micah Morton: "Add additional LSM hooks for SafeSetID SafeSetID is capable of making allow/deny decisions for set*uid calls on a system, and we want to add similar functionality for set*gid calls. The work to do that is not yet complete, so probably won't make it in for v5.8, but we are looking to get this simple patch in for v5.8 since we have it ready. We are planning on the rest of the work for extending the SafeSetID LSM being merged during the v5.9 merge window" * tag 'LSM-add-setgid-hook-5.8-author-fix' of git://github.com/micah-morton/linux: security: Add LSM hooks to set*gid syscalls
-
Thomas Cedeno authored
The SafeSetID LSM uses the security_task_fix_setuid hook to filter set*uid() syscalls according to its configured security policy. In preparation for adding analagous support in the LSM for set*gid() syscalls, we add the requisite hook here. Tested by putting print statements in the security_task_fix_setgid hook and seeing them get hit during kernel boot. Signed-off-by: Thomas Cedeno <thomascedeno@google.com> Signed-off-by: Micah Morton <mortonm@chromium.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs updates from David Sterba: "This reverts the direct io port to iomap infrastructure of btrfs merged in the first pull request. We found problems in invalidate page that don't seem to be fixable as regressions or without changing iomap code that would not affect other filesystems. There are four reverts in total, but three of them are followup cleanups needed to revert a43a67a2 cleanly. The result is the buffer head based implementation of direct io. Reverts are not great, but under current circumstances I don't see better options" * tag 'for-5.8-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Revert "btrfs: switch to iomap_dio_rw() for dio" Revert "fs: remove dio_end_io()" Revert "btrfs: remove BTRFS_INODE_READDIO_NEED_LOCK" Revert "btrfs: split btrfs_direct_IO to read and write part"
-
- 13 Jun, 2020 5 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Fix cfg80211 deadlock, from Johannes Berg. 2) RXRPC fails to send norigications, from David Howells. 3) MPTCP RM_ADDR parsing has an off by one pointer error, fix from Geliang Tang. 4) Fix crash when using MSG_PEEK with sockmap, from Anny Hu. 5) The ucc_geth driver needs __netdev_watchdog_up exported, from Valentin Longchamp. 6) Fix hashtable memory leak in dccp, from Wang Hai. 7) Fix how nexthops are marked as FDB nexthops, from David Ahern. 8) Fix mptcp races between shutdown and recvmsg, from Paolo Abeni. 9) Fix crashes in tipc_disc_rcv(), from Tuong Lien. 10) Fix link speed reporting in iavf driver, from Brett Creeley. 11) When a channel is used for XSK and then reused again later for XSK, we forget to clear out the relevant data structures in mlx5 which causes all kinds of problems. Fix from Maxim Mikityanskiy. 12) Fix memory leak in genetlink, from Cong Wang. 13) Disallow sockmap attachments to UDP sockets, it simply won't work. From Lorenz Bauer. * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits) net: ethernet: ti: ale: fix allmulti for nu type ale net: ethernet: ti: am65-cpsw-nuss: fix ale parameters init net: atm: Remove the error message according to the atomic context bpf: Undo internal BPF_PROBE_MEM in BPF insns dump libbpf: Support pre-initializing .bss global variables tools/bpftool: Fix skeleton codegen bpf: Fix memlock accounting for sock_hash bpf: sockmap: Don't attach programs to UDP sockets bpf: tcp: Recv() should return 0 when the peer socket is closed ibmvnic: Flush existing work items before device removal genetlink: clean up family attributes allocations net: ipa: header pad field only valid for AP->modem endpoint net: ipa: program upper nibbles of sequencer type net: ipa: fix modem LAN RX endpoint id net: ipa: program metadata mask differently ionic: add pcie_print_link_status rxrpc: Fix race between incoming ACK parser and retransmitter net/mlx5: E-Switch, Fix some error pointer dereferences net/mlx5: Don't fail driver on failure to create debugfs net/mlx5e: CT: Fix ipv6 nat header rewrite actions ...
-
David Sterba authored
This reverts commit a43a67a2. This patch reverts the main part of switching direct io implementation to iomap infrastructure. There's a problem in invalidate page that couldn't be solved as regression in this development cycle. The problem occurs when buffered and direct io are mixed, and the ranges overlap. Although this is not recommended, filesystems implement measures or fallbacks to make it somehow work. In this case, fallback to buffered IO would be an option for btrfs (this already happens when direct io is done on compressed data), but the change would be needed in the iomap code, bringing new semantics to other filesystems. Another problem arises when again the buffered and direct ios are mixed, invalidation fails, then -EIO is set on the mapping and fsync will fail, though there's no real error. There have been discussions how to fix that, but revert seems to be the least intrusive option. Link: https://lore.kernel.org/linux-btrfs/20200528192103.xm45qoxqmkw7i5yl@fiona/Signed-off-by: David Sterba <dsterba@suse.com>
-
Grygorii Strashko authored
On AM65xx MCU CPSW2G NUSS and 66AK2E/L NUSS allmulti setting does not allow unregistered mcast packets to pass. This happens, because ALE VLAN entries on these SoCs do not contain port masks for reg/unreg mcast packets, but instead store indexes of ALE_VLAN_MASK_MUXx_REG registers which intended for store port masks for reg/unreg mcast packets. This path was missed by commit 9d1f6447 ("net: ethernet: ti: ale: fix seeing unreg mcast packets with promisc and allmulti disabled"). Hence, fix it by taking into account ALE type in cpsw_ale_set_allmulti(). Fixes: 9d1f6447 ("net: ethernet: ti: ale: fix seeing unreg mcast packets with promisc and allmulti disabled") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Grygorii Strashko authored
The ALE parameters structure is created on stack, so it has to be reset before passing to cpsw_ale_create() to avoid garbage values. Fixes: 93a76530 ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller authored
Alexei Starovoitov says: ==================== pull-request: bpf 2020-06-12 The following pull-request contains BPF updates for your *net* tree. We've added 26 non-merge commits during the last 10 day(s) which contain a total of 27 files changed, 348 insertions(+), 93 deletions(-). The main changes are: 1) sock_hash accounting fix, from Andrey. 2) libbpf fix and probe_mem sanitizing, from Andrii. 3) sock_hash fixes, from Jakub. 4) devmap_val fix, from Jesper. 5) load_bytes_relative fix, from YiFei. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-