Pull block fixes from Jens Axboe:
 "A few fixes/changes to round off this merge window. This contains:

   - Small series making some functional tweaks to blk-iocost (Tejun)

   - Elevator switch locking fix (Ming)

   - Kill redundant call in blk-wbt (Yufen)

   - Fix flush timeout handling (Yufen)"

* tag 'for-linus-2019-09-27' of git://git.kernel.dk/linux-block:
  block: fix null pointer dereference in blk_mq_rq_timed_out()
  rq-qos: get rid of redundant wbt_update_limits()
  iocost: bump up default latency targets for hard disks
  iocost: improve nr_lagging handling
  iocost: better trace vrate changes
  block: don't release queue's sysfs lock during switching elevator
  blk-mq: move lockdep_assert_held() into elevator_exit

Pull thermal management updates from Zhang Rui:

 - Add Amit Kucheria as thermal subsystem Reviewer (Amit Kucheria)

 - Fix a use after free bug when unregistering thermal zone devices (Ido
   Schimmel)

 - Fix thermal core framework to use put_device() when device_register()
   fails (Yue Hu)

 - Enable intel_pch_thermal and MMIO RAPL support for Intel Icelake
   platform (Srinivas Pandruvada)

 - Add clock operations in qorip thermal driver, for some platforms with
   clock control like i.MX8MQ (Anson Huang)

 - A couple of trivial fixes and cleanups for thermal core and different
   soc thermal drivers (Amit Kucheria, Christophe JAILLET, Chuhong Yuan,
   Fuqian Huang, Kelsey Skunberg, Nathan Huckleberry, Rishi Gupta,
   Srinivas Kandagatla)

* 'for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux:
  MAINTAINERS: Add Amit Kucheria as reviewer for thermal
  thermal: Add some error messages
  thermal: Fix use-after-free when unregistering thermal zone device
  thermal/drivers/core: Use put_device() if device_register() fails
  thermal_hwmon: Sanitize thermal_zone type
  thermal: intel: Use dev_get_drvdata
  thermal: intel: int3403: replace printk(KERN_WARN...) with pr_warn(...)
  thermal: intel: int340x_thermal: Remove unnecessary acpi_has_method() uses
  thermal: int340x: processor_thermal: Add Ice Lake support
  drivers: thermal: qcom: tsens: Fix memory leak from qfprom read
  thermal: tegra: Fix a typo
  thermal: rcar_gen3_thermal: Replace devm_add_action() followed by failure action with devm_add_action_or_reset()
  thermal: armada: Fix -Wshift-negative-value
  dt-bindings: thermal: qoriq: Add optional clocks property
  thermal: qoriq: Use __maybe_unused instead of #if CONFIG_PM_SLEEP
  thermal: qoriq: Use devm_platform_ioremap_resource() instead of of_iomap()
  thermal: qoriq: Fix error path of calling qoriq_tmu_register_tmu_zone fail
  thermal: qoriq: Add clock operations
  drivers: thermal: processor_thermal_device: Export sysfs interface for TCC offset

Pull watchdog updates from Wim Van Sebroeck:

 - addition of AST2600, i.MX7ULP and F81803 watchdog support

 - removal of the w90x900 and ks8695 drivers

 - ziirave_wdt improvements

 - small fixes and improvements

* tag 'linux-watchdog-5.4-rc1' of git://www.linux-watchdog.org/linux-watchdog: (51 commits)
  watchdog: f71808e_wdt: Add F81803 support
  watchdog: qcom: remove unnecessary variable from private storage
  watchdog: qcom: support pre-timeout when the bark irq is available
  watchdog: imx_sc: this patch just fixes whitespaces
  watchdog: apseed: Add access_cs0 option for alt-boot
  watchdog: aspeed: add support for dual boot
  watchdog: orion_wdt: use timer1 as a pretimeout
  watchdog: Add i.MX7ULP watchdog support
  dt-bindings: watchdog: Add i.MX7ULP bindings
  dt-bindings: watchdog: sun4i: Add the watchdog clock
  dt-bindings: watchdog: sun4i: Add the watchdog interrupts
  dt-bindings: watchdog: Convert Allwinner watchdog to a schema
  dt-bindings: watchdog: Add YAML schemas for the generic watchdog bindings
  watchdog: aspeed: Add support for AST2600
  dt-bindings: watchdog: Add ast2600 compatible
  watchdog: ziirave_wdt: Update checked I2C functionality mask
  watchdog: ziirave_wdt: Drop ziirave_firm_write_block_data()
  watchdog: ziirave_wdt: Fix DOWNLOAD_START payload
  watchdog: ziirave_wdt: Drop status polling code
  watchdog: ziirave_wdt: Fix RESET_PROCESSOR payload
  ...

Pull drm fixes from Dave Airlie:
 "Fixes built up over the past 1.5 weeks or so, it's two weeks of
  amdgpu, some core cleanups and some panfrost fixes. I also finally
  figured out why my desktop was slow to do a bunch of stuff (someone
  gave it an IPv6 address which can't reach anything!).

  core:
   - Some cleanups and fixes in the self-refresh helpers
   - Some cleanups and fixes in the atomic helpers

  amdgpu:
   - Fix a 64 bit divide
   - Prevent a memory leak in a failure case in dc
   - Load proper gfx firmware on navi14 variants
   - Add more navi12 and navi14 PCI ids
   - Misc fixes for renoir
   - Fix bandwidth issues with multiple displays on vega20
   - Support for Dali
   - Fix a possible oops with KFD on hawaii
   - Fix for backlight level after resume on some APUs
   - Other misc fixes

  panfrost:
   - Multiple panfrost fixes for regulator support and page fault
     handling"

* tag 'drm-next-2019-09-27' of git://anongit.freedesktop.org/drm/drm: (34 commits)
  drm/amd/display: prevent memory leak
  drm/amdgpu/gfx10: add support for wks firmware loading
  drm/amdgpu/display: include slab.h in dcn21_resource.c
  drm/amdgpu/display: fix 64 bit divide
  drm/panfrost: Prevent race when handling page fault
  drm/panfrost: Remove NULL checks for regulator
  drm/panfrost: Fix regulator_get_optional() misuse
  drm: Measure Self Refresh Entry/Exit times to avoid thrashing
  drm: Fix kerneldoc and remove unused struct member in self_refresh helper
  drm/atomic: Rename crtc_state->pageflip_flags to async_flip
  drm/atomic: Reject FLIP_ASYNC unconditionally
  drm/atomic: Take the atomic toys away from X
  drm/amdgpu: flag navi12 and 14 as experimental for 5.4
  drm/kms: Duct-tape for mode object lifetime checks
  drm/amdgpu: add navi12 pci id
  drm/amdgpu: add navi14 PCI ID for work station SKU
  drm/amdkfd: Swap trap temporary registers in gfx10 trap handler
  drm/amd/powerplay: implement sysfs for getting dpm clock
  drm/amd/display: Restore backlight brightness after system resume
  drm/amd/display: Implement voltage limitation for dali
  ...

Pull NTB updates from Jon Mason:
 "A few bugfixes and support for new AMD NTB hardware"

* tag 'ntb-5.4' of git://github.com/jonmason/ntb:
  NTB: fix IDT Kconfig typos/spellos
  ntb_hw_amd: Add memory window support for new AMD hardware
  ntb_hw_amd: Add a new NTB PCI device ID
  NTB: ntb_transport: remove redundant assignment to rc
  ntb_hw_switchtec: make ntb_mw_set_trans() work when addr == 0
  ntb: point to right memory window index

To address a major procedural concern on Linus's part the keyrings needs
a co-maintainer.
Suggested-by: David Howells <dhowells@redhat.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

We got a null pointer deference BUG_ON in blk_mq_rq_timed_out()
as following:

[  108.825472] BUG: kernel NULL pointer dereference, address: 0000000000000040
[  108.827059] PGD 0 P4D 0
[  108.827313] Oops: 0000 [#1] SMP PTI
[  108.827657] CPU: 6 PID: 198 Comm: kworker/6:1H Not tainted 5.3.0-rc8+ #431
[  108.829503] Workqueue: kblockd blk_mq_timeout_work
[  108.829913] RIP: 0010:blk_mq_check_expired+0x258/0x330
[  108.838191] Call Trace:
[  108.838406]  bt_iter+0x74/0x80
[  108.838665]  blk_mq_queue_tag_busy_iter+0x204/0x450
[  108.839074]  ? __switch_to_asm+0x34/0x70
[  108.839405]  ? blk_mq_stop_hw_queue+0x40/0x40
[  108.839823]  ? blk_mq_stop_hw_queue+0x40/0x40
[  108.840273]  ? syscall_return_via_sysret+0xf/0x7f
[  108.840732]  blk_mq_timeout_work+0x74/0x200
[  108.841151]  process_one_work+0x297/0x680
[  108.841550]  worker_thread+0x29c/0x6f0
[  108.841926]  ? rescuer_thread+0x580/0x580
[  108.842344]  kthread+0x16a/0x1a0
[  108.842666]  ? kthread_flush_work+0x170/0x170
[  108.843100]  ret_from_fork+0x35/0x40

The bug is caused by the race between timeout handle and completion for
flush request.

When timeout handle function blk_mq_rq_timed_out() try to read
'req->q->mq_ops', the 'req' have completed and reinitiated by next
flush request, which would call blk_rq_init() to clear 'req' as 0.

After commit 12f5b931 ("blk-mq: Remove generation seqeunce"),
normal requests lifetime are protected by refcount. Until 'rq->ref'
drop to zero, the request can really be free. Thus, these requests
cannot been reused before timeout handle finish.

However, flush request has defined .end_io and rq->end_io() is still
called even if 'rq->ref' doesn't drop to zero. After that, the 'flush_rq'
can be reused by the next flush request handle, resulting in null
pointer deference BUG ON.

We fix this problem by covering flush request with 'rq->ref'.
If the refcount is not zero, flush_end_io() return and wait the
last holder recall it. To record the request status, we add a new
entry 'rq_status', which will be used in flush_end_io().

Cc: Christoph Hellwig <hch@infradead.org>
Cc: Keith Busch <keith.busch@intel.com>
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: stable@vger.kernel.org # v4.18+
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>

-------
v2:
 - move rq_status from struct request to struct blk_flush_queue
v3:
 - remove unnecessary '{}' pair.
v4:
 - let spinlock to protect 'fq->rq_status'
v5:
 - move rq_status after flush_running_idx member of struct blk_flush_queue
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We have updated limits after calling wbt_set_min_lat(). No need to
update again.
Reviewed-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Yufen Yu <yuyufen@huawei.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull timer fix from Ingo Molnar:
 "Fix a timer expiry bug that would cause spurious delay of timers"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timer: Read jiffies once when forwarding base clk

Pull more perf updates from Ingo Molnar:
 "The only kernel change is comment typo fixes.

  The rest is mostly tooling fixes, but also new vendor event additions
  and updates, a bigger libperf/libtraceevent library and a header files
  reorganization that came in a bit late"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (108 commits)
  perf unwind: Fix libunwind build failure on i386 systems
  perf parser: Remove needless include directives
  perf build: Add detection of java-11-openjdk-devel package
  perf jvmti: Include JVMTI support for s390
  perf vendor events: Remove P8 HW events which are not supported
  perf evlist: Fix access of freed id arrays
  perf stat: Fix free memory access / memory leaks in metrics
  perf tools: Replace needless mmap.h with what is needed, event.h
  perf evsel: Move config terms to a separate header
  perf evlist: Remove unused perf_evlist__fprintf() method
  perf evsel: Introduce evsel_fprintf.h
  perf evsel: Remove need for symbol_conf in evsel_fprintf.c
  perf copyfile: Move copyfile routines to separate files
  libperf: Add perf_evlist__poll() function
  libperf: Add perf_evlist__add_pollfd() function
  libperf: Add perf_evlist__alloc_pollfd() function
  libperf: Add libperf_init() call to the tests
  libperf: Merge libperf_set_print() into libperf_init()
  libperf: Add libperf dependency for tests targets
  libperf: Use sys/types.h to get ssize_t, not unistd.h
  ...

Pull tracing fix from Steven Rostedt:
 "Srikar Dronamraju fixed a bug in the newmulti probe code"

* tag 'trace-v5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
  tracing/probe: Fix same probe event argument matching

Naresh Kamboju reported, that on the i386 build pr_err()
doesn't get defined properly due to header ordering:

  perf-in.o: In function `libunwind__x86_reg_id':
  tools/perf/util/libunwind/../../arch/x86/util/unwind-libunwind.c:109:
  undefined reference to `pr_err'
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Pull usercopy fix from Kees Cook:
 "Fix hardened usercopy under CONFIG_DEBUG_VIRTUAL"

* tag 'usercopy-v5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  usercopy: Avoid HIGHMEM pfn warning

Merge tag 'linux-kselftest-5.4-rc1.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull Kselftest updates from Shuah Khan:
 "Fixes to existing tests"

* tag 'linux-kselftest-5.4-rc1.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests: tpm2: install python files
  selftests: livepatch: add missing fragments to config
  selftests: watchdog: cleanup whitespace in usage options
  selftest/ftrace: Fix typo in trigger-snapshot.tc
  selftests: watchdog: Add optional file argument
  selftests/seccomp: fix build on older kernels
  selftests: use "$(MAKE)" instead of "make"

Pull NFS client updates from Anna Schumaker:
 "Stable bugfixes:
   - Dequeue the request from the receive queue while we're re-encoding
     # v4.20+
   - Fix buffer handling of GSS MIC without slack # 5.1

  Features:
   - Increase xprtrdma maximum transport header and slot table sizes
   - Add support for nfs4_call_sync() calls using a custom
     rpc_task_struct
   - Optimize the default readahead size
   - Enable pNFS filelayout LAYOUTGET on OPEN

  Other bugfixes and cleanups:
   - Fix possible null-pointer dereferences and memory leaks
   - Various NFS over RDMA cleanups
   - Various NFS over RDMA comment updates
   - Don't receive TCP data into a reset request buffer
   - Don't try to parse incomplete RPC messages
   - Fix congestion window race with disconnect
   - Clean up pNFS return-on-close error handling
   - Fixes for NFS4ERR_OLD_STATEID handling"

* tag 'nfs-for-5.4-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (53 commits)
  pNFS/filelayout: enable LAYOUTGET on OPEN
  NFS: Optimise the default readahead size
  NFSv4: Handle NFS4ERR_OLD_STATEID in LOCKU
  NFSv4: Handle NFS4ERR_OLD_STATEID in CLOSE/OPEN_DOWNGRADE
  NFSv4: Fix OPEN_DOWNGRADE error handling
  pNFS: Handle NFS4ERR_OLD_STATEID on layoutreturn by bumping the state seqid
  NFSv4: Add a helper to increment stateid seqids
  NFSv4: Handle RPC level errors in LAYOUTRETURN
  NFSv4: Handle NFS4ERR_DELAY correctly in return-on-close
  NFSv4: Clean up pNFS return-on-close error handling
  pNFS: Ensure we do clear the return-on-close layout stateid on fatal errors
  NFS: remove unused check for negative dentry
  NFSv3: use nfs_add_or_obtain() to create and reference inodes
  NFS: Refactor nfs_instantiate() for dentry referencing callers
  SUNRPC: Fix congestion window race with disconnect
  SUNRPC: Don't try to parse incomplete RPC messages
  SUNRPC: Rename xdr_buf_read_netobj to xdr_buf_read_mic
  SUNRPC: Fix buffer handling of GSS MIC without slack
  SUNRPC: RPC level errors should always set task->tk_rpc_status
  SUNRPC: Don't receive TCP data into a request buffer that has been reset
  ...

When brk was moved for binaries without an interpreter, it should have
been limited to ET_DYN only. In other words, the special case was an
ET_DYN that lacks an INTERP, not just an executable that lacks INTERP.
The bug manifested for giant static executables, where the brk would end
up in the middle of the text area on 32-bit architectures.
Reported-and-tested-by: Richard Kojedzinszky <richard@kojedz.in>
Fixes: bbdc6076 ("binfmt_elf: move brk out of mmap when doing direct loader exec")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull xfs fixes from Darrick Wong:
 "There are a couple of bug fixes and some small code cleanups that came
  in recently:

   - Minor code cleanups

   - Fix a superblock logging error

   - Ensure that collapse range converts the data fork to extents format
     when necessary

   - Revert the ALLOC_USERDATA cleanup because it caused subtle behavior
     regressions"

* tag 'xfs-5.4-merge-8' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  xfs: avoid unused to_mp() function warning
  xfs: log proper length of superblock
  xfs: revert 1baa2800 ("xfs: remove the unused XFS_ALLOC_USERDATA flag")
  xfs: removed unneeded variable
  xfs: convert inode to extent format after extent merge due to shift

Pull jffs2 fix from Al Viro:
 "braino fix for mount API conversion for jffs2"

* 'work.mount3' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  jffs2: Fix mounting under new mount API

Pull more s390 updates from Vasily Gorbik:

 - Fix three kasan findings

 - Add PERF_EVENT_IOC_PERIOD ioctl support

 - Add Crypto Express7S support and extend sysfs attributes for pkey

 - Minor common I/O layer documentation corrections

* tag 's390-5.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/cio: exclude subchannels with no parent from pseudo check
  s390/cio: avoid calling strlen on null pointer
  s390/topology: avoid firing events before kobjs are created
  s390/cpumf: Remove mixed white space
  s390/cpum_sf: Support ioctl PERF_EVENT_IOC_PERIOD
  s390/zcrypt: CEX7S exploitation support
  s390/cio: fix intparm documentation
  s390/pkey: Add sysfs attributes to emit AES CIPHER key blobs

Pull xen update from Juergen Gross:
 "Only two small patches this time:

   - a small cleanup for swiotlb-xen

   - a fix for PCI initialization for some platforms"

* tag 'for-linus-5.4-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/pci: reserve MCFG areas earlier
  swiotlb-xen: Convert to use macro

Merge more updates from Andrew Morton:

 - almost all of the rest of -mm

 - various other subsystems

Subsystems affected by this patch series:
  memcg, misc, core-kernel, lib, checkpatch, reiserfs, fat, fork,
  cpumask, kexec, uaccess, kconfig, kgdb, bug, ipc, lzo, kasan, madvise,
  cleanups, pagemap

* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (77 commits)
  arch/sparc/include/asm/pgtable_64.h: fix build
  mm: treewide: clarify pgtable_page_{ctor,dtor}() naming
  ntfs: remove (un)?likely() from IS_ERR() conditions
  IB/hfi1: remove unlikely() from IS_ERR*() condition
  xfs: remove unlikely() from WARN_ON() condition
  wimax/i2400m: remove unlikely() from WARN*() condition
  fs: remove unlikely() from WARN_ON() condition
  xen/events: remove unlikely() from WARN() condition
  checkpatch: check for nested (un)?likely() calls
  hexagon: drop empty and unused free_initrd_mem
  mm: factor out common parts between MADV_COLD and MADV_PAGEOUT
  mm: introduce MADV_PAGEOUT
  mm: change PAGEREF_RECLAIM_CLEAN with PAGE_REFRECLAIM
  mm: introduce MADV_COLD
  mm: untag user pointers in mmap/munmap/mremap/brk
  vfio/type1: untag user pointers in vaddr_get_pfn
  tee/shm: untag user pointers in tee_shm_register
  media/v4l2-core: untag user pointers in videobuf_dma_contig_user_get
  drm/radeon: untag user pointers in radeon_gem_userptr_ioctl
  drm/amdgpu: untag user pointers
  ...

A last-minute fixlet which I'd failed to merge at the appropriate time
had the predictable effect.

Fixes: f672e2c217e2d4b2 ("lib: untag user pointers in strn*_user")
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The naming of pgtable_page_{ctor,dtor}() seems to have confused a few
people, and until recently arm64 used these erroneously/pointlessly for
other levels of page table.

To make it incredibly clear that these only apply to the PTE level, and to
align with the naming of pgtable_pmd_page_{ctor,dtor}(), let's rename them
to pgtable_pte_page_{ctor,dtor}().

These changes were generated with the following shell script:

----
git grep -lw 'pgtable_page_.tor' | while read FILE; do
    sed -i '{s/pgtable_page_ctor/pgtable_pte_page_ctor/}' $FILE;
    sed -i '{s/pgtable_page_dtor/pgtable_pte_page_dtor/}' $FILE;
done
----

... with the documentation re-flowed to remain under 80 columns, and
whitespace fixed up in macros to keep backslashes aligned.

There should be no functional change as a result of this patch.

Link: http://lkml.kernel.org/r/20190722141133.3116-1-mark.rutland@arm.comSigned-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>	[m68k]
Cc: Anshuman Khandual <anshuman.khandual@arm.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Yu Zhao <yuzhao@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

"likely(!IS_ERR(x))" is excessive. IS_ERR() already uses
unlikely() internally.

Link: http://lkml.kernel.org/r/20190829165025.15750-11-efremov@linux.comSigned-off-by: Denis Efremov <efremov@linux.com>
Cc: Anton Altaparmakov <anton@tuxera.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

"unlikely(IS_ERR_OR_NULL(x))" is excessive. IS_ERR_OR_NULL() already uses
unlikely() internally.

Link: http://lkml.kernel.org/r/20190829165025.15750-8-efremov@linux.comSigned-off-by: Denis Efremov <efremov@linux.com>
Cc: Mike Marciniszyn <mike.marciniszyn@intel.com>
Cc: Joe Perches <joe@perches.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

"unlikely(WARN_ON(x))" is excessive. WARN_ON() already uses unlikely()
internally.

Link: http://lkml.kernel.org/r/20190829165025.15750-7-efremov@linux.comSigned-off-by: Denis Efremov <efremov@linux.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

"unlikely(WARN_ON(x))" is excessive. WARN_ON() already uses unlikely()
internally.

Link: http://lkml.kernel.org/r/20190829165025.15750-6-efremov@linux.comSigned-off-by: Denis Efremov <efremov@linux.com>
Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

"unlikely(WARN_ON(x))" is excessive. WARN_ON() already uses unlikely()
internally.

Link: http://lkml.kernel.org/r/20190829165025.15750-5-efremov@linux.comSigned-off-by: Denis Efremov <efremov@linux.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

"unlikely(WARN(x))" is excessive. WARN() already uses unlikely()
internally.

Link: http://lkml.kernel.org/r/20190829165025.15750-4-efremov@linux.comSigned-off-by: Denis Efremov <efremov@linux.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Joe Perches <joe@perches.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The mounting of jffs2 is broken due to the changes from the new mount API
because it specifies a "source" operation, but then doesn't actually
process it.  But because it specified it, it doesn't return -ENOPARAM and
the caller doesn't process it either and the source gets lost.

Fix this by simply removing the source parameter from jffs2 and letting the
VFS deal with it in the default manner.

To test it, enable CONFIG_MTD_MTDRAM and allow the default size and erase
block size parameters, then try and mount the /dev/mtdblock<N> file that
that creates as jffs2.  No need to initialise it.

Fixes: ec10a24f ("vfs: Convert jffs2 to use the new mount API")
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: David Howells <dhowells@redhat.com>
cc: David Woodhouse <dwmw2@infradead.org>
cc: Richard Weinberger <richard@nod.at>
cc: linux-mtd@lists.infradead.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

The default hard disk param sets latency targets at 50ms.  As the
default target percentiles are zero, these don't directly regulate
vrate; however, they're still used to calculate the period length -
100ms in this case.

This is excessively low.  A SATA drive with QD32 saturated with random
IOs can easily reach avg completion latency of several hundred msecs.
A period duration which is substantially lower than avg completion
latency can lead to wildly fluctuating vrate.

Let's bump up the default latency targets to 250ms so that the period
duration is sufficiently long.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Some IOs may span multiple periods.  As latencies are collected on
completion, the inbetween periods won't register them and may
incorrectly decide to increase vrate.  nr_lagging tracks these IOs to
avoid those situations.  Currently, whenever there are IOs which are
spanning from the previous period, busy_level is reset to 0 if
negative thus suppressing vrate increase.

This has the following two problems.

* When latency target percentiles aren't set, vrate adjustment should
  only be governed by queue depth depletion; however, the current code
  keeps nr_lagging active which pulls in latency results and can keep
  down vrate unexpectedly.

* When lagging condition is detected, it resets the entire negative
  busy_level.  This turned out to be way too aggressive on some
  devices which sometimes experience extended latencies on a small
  subset of commands.  In addition, a lagging IO will be accounted as
  latency target miss on completion anyway and resetting busy_level
  amplifies its impact unnecessarily.

This patch fixes the above two problems by disabling nr_lagging
counting when latency target percentiles aren't set and blocking vrate
increases when there are lagging IOs while leaving busy_level as-is.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

vrate_adj tracepoint traces vrate changes; however, it does so only
when busy_level is non-zero.  busy_level turning to zero can sometimes
be as interesting an event.  This patch also enables vrate_adj
tracepoint on other vrate related events - busy_level changes and
non-zero nr_lagging.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

cecf5d87 ("block: split .sysfs_lock into two locks") starts to
release & acquire sysfs_lock before registering/un-registering elevator
queue during switching elevator for avoiding potential deadlock from
showing & storing 'queue/iosched' attributes and removing elevator's
kobject.

Turns out there isn't such deadlock because 'q->sysfs_lock' isn't
required in .show & .store of queue/iosched's attributes, and just
elevator's sysfs lock is acquired in elv_iosched_store() and
elv_iosched_show(). So it is safe to hold queue's sysfs lock when
registering/un-registering elevator queue.

The biggest issue is that commit cecf5d87 assumes that concurrent
write on 'queue/scheduler' can't happen. However, this assumption isn't
true, because kernfs_fop_write() only guarantees that concurrent write
aren't called on the same open file, but the write could be from
different open on the file. So we can't release & re-acquire queue's
sysfs lock during switching elevator, otherwise use-after-free on
elevator could be triggered.

Fixes the issue by not releasing queue's sysfs lock during switching
elevator.

Fixes: cecf5d87 ("block: split .sysfs_lock into two locks")
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Hannes Reinecke <hare@suse.com>
Cc: Greg KH <gregkh@linuxfoundation.org>
Cc: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Commit c48dac13 ("block: don't hold q->sysfs_lock in elevator_init_mq")
removes q->sysfs_lock from elevator_init_mq(), but forgot to deal with
lockdep_assert_held() called in blk_mq_sched_free_requests() which is
run in failure path of elevator_init_mq().

blk_mq_sched_free_requests() is called in the following 3 functions:

	elevator_init_mq()
	elevator_exit()
	blk_cleanup_queue()

In blk_cleanup_queue(), blk_mq_sched_free_requests() is followed exactly
by 'mutex_lock(&q->sysfs_lock)'.

So moving the lockdep_assert_held() from blk_mq_sched_free_requests()
into elevator_exit() for fixing the report by syzbot.

Reported-by: syzbot+da3b7677bb913dc1b737@syzkaller.appspotmail.com
Fixed: c48dac13 ("block: don't hold q->sysfs_lock in elevator_init_mq")
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Merge tag 'perf-core-for-mingo-5.5-20190925' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

perf record:

  Stephane Eranian:

  - Fix priv level with branch sampling for paranoid=2, i.e. the kernel checks
    if perf_event_attr_attr.exclude_hv is set in addition to .exclude_kernel,
    so reset both to zero.

  Arnaldo Carvalho de Melo:

  - Don't warn about not being able to read kernel maps (kallsyms, etc) when
    kernel samples aren't being collected.

perf list:

  Kim Phillips:

  - Allow plurals for metric, metricgroup., i.e.:

    $ perf list metrics

    was showing nothing, which is very confusing, make it work like:

    $ perf stat metric

perf stat:

  Andi Kleen:

  - Free memory access/leaks detected via valgrind, related to metrics.

Libraries:

libperf:

  Jiri Olsa:

  - Move more stuff from tools/perf, this time a first stab at moving perf_mmap
    methods.

libtracevent:

  Steven Rostedt (VMware):

  - Round up in tep_print_event() time precision.

  Tzvetomir Stoyanov (VMware):

  - Man pages for event print and related and plugins APIs.

  - Move traceevent plugins in its own subdirectory.

Feature detection:

  Thomas Richter:

  - Add detection of java-11-openjdk-devel package, in addition to the older
    versions supported.

Architecture specific:

S/390:

  Thomas Richter (2):

  - Include JVMTI support for s390

Vendor events:

AMD:

  Kim Phillips:

  - Add L3 cache events for Family 17h.

  - Remove redundant '['.

PowerPC:

  Mamatha Inamdar:

  - Remove P8 HW events which are not supported.

Cleanups:

  Arnaldo Carvalho de Melo:

  - Remove needless headers, add needed ones, move things around to reduce the
    headers dependency tree, speeding up builds by not doing needless compiles
    when unrelated stuff gets changed.

  - Ditch unused code that was dragging headers.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

drm-fixes-5.4-2019-09-25:

amdgpu:
- Fix a 64 bit divide
- Prevent a memory leak in a failure case in dc
- Load proper gfx firmware on navi14 variants

drm-fixes-5.4-2019-09-19:

amdgpu:
- Add more navi12 and navi14 PCI ids
- Misc fixes for renoir
- Fix bandwidth issues with multiple displays on vega20
- Support for Dali
- Fix a possible oops with KFD on hawaii
- Fix for backlight level after resume on some APUs
- Other misc fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190925213500.3490-1-alexander.deucher@amd.com

IS_ERR(), IS_ERR_OR_NULL(), IS_ERR_VALUE() and WARN*() already contain
unlikely() optimization internally.  Thus, there is no point in calling
these functions and defines under likely()/unlikely().

This check is based on the coccinelle rule developed by Enrico Weigelt
https://lore.kernel.org/lkml/1559767582-11081-1-git-send-email-info@metux.net/

Link: http://lkml.kernel.org/r/20190829165025.15750-1-efremov@linux.comSigned-off-by: Denis Efremov <efremov@linux.com>
Cc: Joe Perches <joe@perches.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Anton Altaparmakov <anton@tuxera.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Boris Pismenny <borisp@mellanox.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Denis Efremov <efremov@linux.com>
Cc: Dennis Dalessandro <dennis.dalessandro@intel.com>
Cc: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Mike Marciniszyn <mike.marciniszyn@intel.com>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Cc: Sean Paul <sean@poorly.run>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hexagon never reserves or initializes initrd and the only mention of it is
the empty free_initrd_mem() function.

As we have a generic implementation of free_initrd_mem(), there is no need
to define an empty stub for the hexagon implementation and it can be
dropped.

Link: http://lkml.kernel.org/r/1565858133-25852-1-git-send-email-rppt@linux.ibm.comSigned-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Richard Kuo <rkuo@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There are many common parts between MADV_COLD and MADV_PAGEOUT.
This patch factor them out to save code duplication.

Link: http://lkml.kernel.org/r/20190726023435.214162-6-minchan@kernel.orgSigned-off-by: Minchan Kim <minchan@kernel.org>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Daniel Colascione <dancol@google.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
Cc: Joel Fernandes (Google) <joel@joelfernandes.org>
Cc: kbuild test robot <lkp@intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Oleksandr Natalenko <oleksandr@redhat.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Sonny Rao <sonnyrao@google.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Tim Murray <timmurray@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>