- 09 Jun, 2022 6 commits
-
-
Marek Behún authored
Commit ede359d8 ("net: dsa: mv88e6xxx: Link in pcs_get_state() if AN is bypassed") added the ability to link if AN was bypassed, and added filling of state->an_complete field, but set it to true if AN was enabled in BMCR, not when AN was reported complete in BMSR. This was done because for some reason, when I wanted to use BMSR value to infer an_complete, I was looking at BMSR_ANEGCAPABLE bit (which was always 1), instead of BMSR_ANEGCOMPLETE bit. Use BMSR_ANEGCOMPLETE for filling state->an_complete. Fixes: ede359d8 ("net: dsa: mv88e6xxx: Link in pcs_get_state() if AN is bypassed") Signed-off-by:
Marek Behún <kabel@kernel.org> Signed-off-by:
Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Miaoqian Lin authored
Every iteration of for_each_child_of_node() decrements the reference count of the previous node. When break from a for_each_child_of_node() loop, we need to explicitly call of_node_put() on the child node when not need anymore. Add missing of_node_put() to avoid refcount leak. Fixes: bbd2190c ("Altera TSE: Add main and header file for Altera Ethernet Driver") Signed-off-by:
Miaoqian Lin <linmq006@gmail.com> Link: https://lore.kernel.org/r/20220607041144.7553-1-linmq006@gmail.comSigned-off-by:
-
Ilya Maximets authored
If packet headers changed, the cached nfct is no longer relevant for the packet and attempt to re-use it leads to the incorrect packet classification. This issue is causing broken connectivity in OpenStack deployments with OVS/OVN due to hairpin traffic being unexpectedly dropped. The setup has datapath flows with several conntrack actions and tuple changes between them: actions:ct(commit,zone=8,mark=0/0x1,nat(src)), set(eth(src=00:00:00:00:00:01,dst=00:00:00:00:00:06)), set(ipv4(src=172.18.2.10,dst=192.168.100.6,ttl=62)), ct(zone=8),recirc(0x4) After the first ct() action the packet headers are almost fully re-written. The next ct() tries to re-use the existing nfct entry and marks the packet as invalid, so it gets dropped later in the pipeline. Clearing the cached conntrack entry whenever packet tuple is changed to avoid the issue. The flow key should not be cleared though, because we should still be able to match on the ct_state if the recirculation happens after the tuple change but before the next ct() action. Cc: stable@vger.kernel.org Fixes: 7f8a436e ("openvswitch: Add conntrack action") Reported-by:Frode Nordahl <frode.nordahl@canonical.com> Link: https://mail.openvswitch.org/pipermail/ovs-discuss/2022-May/051829.html Link: https://bugs.launchpad.net/ubuntu/+source/ovn/+bug/1967856Signed-off-by:
Ilya Maximets <i.maximets@ovn.org> Link: https://lore.kernel.org/r/20220606221140.488984-1-i.maximets@ovn.orgSigned-off-by:
-
Chen Lin authored
When rx_flag == MTK_RX_FLAGS_HWLRO, rx_data_len = MTK_MAX_LRO_RX_LENGTH(4096 * 3) > PAGE_SIZE. netdev_alloc_frag is for alloction of page fragment only. Reference to other drivers and Documentation/vm/page_frags.rst Branch to use __get_free_pages when ring->frag_size > PAGE_SIZE. Signed-off-by:
Chen Lin <chen45464546@163.com> Link: https://lore.kernel.org/r/1654692413-2598-1-git-send-email-chen45464546@163.comSigned-off-by:
-
Willem de Bruijn authored
GRE with TUNNEL_CSUM will apply local checksum offload on CHECKSUM_PARTIAL packets. ipgre_xmit must validate csum_start after an optional skb_pull, else lco_csum may trigger an overflow. The original check was if (csum && skb_checksum_start(skb) < skb->data) return -EINVAL; This had false positives when skb_checksum_start is undefined: when ip_summed is not CHECKSUM_PARTIAL. A discussed refinement was straightforward if (csum && skb->ip_summed == CHECKSUM_PARTIAL && skb_checksum_start(skb) < skb->data) return -EINVAL; But was eventually revised more thoroughly: - restrict the check to the only branch where needed, in an uncommon GRE path that uses header_ops and calls skb_pull. - test skb_transport_header, which is set along with csum_start in skb_partial_csum_set in the normal header_ops datapath. Turns out skbs can arrive in this branch without the transport header set, e.g., through BPF redirection. Revise the check back to check csum_start directly, and only if CHECKSUM_PARTIAL. Do leave the check in the updated location. Check field regardless of whether TUNNEL_CSUM is configured. Link: https://lore.kernel.org/netdev/YS+h%2FtqCJJiQei+W@shredder/ Link: https://lore.kernel.org/all/20210902193447.94039-2-willemdebruijn.kernel@gmail.com/T/#u Fixes: 8a0ed250 ("ip_gre: validate csum_start only on pull") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/20220606132107.3582565-1-willemdebruijn.kernel@gmail.comSigned-off-by:
-
https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf 2022-06-09 We've added 6 non-merge commits during the last 2 day(s) which contain a total of 8 files changed, 49 insertions(+), 15 deletions(-). The main changes are: 1) Fix an illegal copy_to_user() attempt seen by syzkaller through arm64 BPF JIT compiler, from Eric Dumazet. 2) Fix calling global functions from BPF_PROG_TYPE_EXT programs by using the correct program context type, from Toke Høiland-Jørgensen. 3) Fix XSK TX batching invalid descriptor handling, from Maciej Fijalkowski. 4) Fix potential integer overflows in multi-kprobe link code by using safer kvmalloc_array() allocation helpers, from Dan Carpenter. 5) Add Quentin as bpftool maintainer, from Quentin Monnet. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: MAINTAINERS: Add a maintainer for bpftool xsk: Fix handling of invalid descriptors in XSK TX batching API selftests/bpf: Add selftest for calling global functions from freplace bpf: Fix calling global functions from BPF_PROG_TYPE_EXT programs bpf: Use safer kvmalloc_array() where possible bpf, arm64: Clear prog->jited_len along prog->jited ==================== Link: https://lore.kernel.org/r/20220608234133.32265-1-daniel@iogearbox.netSigned-off-by:
-
- 08 Jun, 2022 17 commits
-
-
Arnd Bergmann authored
The conversion to the dma-mapping API in linux-2.6.11 was incomplete and left a virt_to_bus() call around. There have been a number of fixes for DMA mapping API abuse in this driver, but this one always slipped through. Change it to just use the existing dma_addr_t pointer, and make it use the correct types throughout the driver to make it easier to understand the virtual vs dma address spaces. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Tested-by:
Manuel Lauss <manuel.lauss@gmail.com> Link: https://lore.kernel.org/r/20220607090206.19830-1-arnd@kernel.orgSigned-off-by:
-
Wang Yufen authored
When len >= INT_MAX - transhdrlen, ulen = len + transhdrlen will be overflow. To fix, we can follow what udpv6 does and subtract the transhdrlen from the max. Signed-off-by:
Wang Yufen <wangyufen@huawei.com> Link: https://lore.kernel.org/r/20220607120028.845916-2-wangyufen@huawei.comSigned-off-by:
-
Wang Yufen authored
Resurrect ubsan overflow checks and ubsan report this warning, fix it by change the variable [length] type to size_t. UBSAN: signed-integer-overflow in net/ipv6/ip6_output.c:1489:19 2147479552 + 8567 cannot be represented in type 'int' CPU: 0 PID: 253 Comm: err Not tainted 5.16.0+ #1 Hardware name: linux,dummy-virt (DT) Call trace: dump_backtrace+0x214/0x230 show_stack+0x30/0x78 dump_stack_lvl+0xf8/0x118 dump_stack+0x18/0x30 ubsan_epilogue+0x18/0x60 handle_overflow+0xd0/0xf0 __ubsan_handle_add_overflow+0x34/0x44 __ip6_append_data.isra.48+0x1598/0x1688 ip6_append_data+0x128/0x260 udpv6_sendmsg+0x680/0xdd0 inet6_sendmsg+0x54/0x90 sock_sendmsg+0x70/0x88 ____sys_sendmsg+0xe8/0x368 ___sys_sendmsg+0x98/0xe0 __sys_sendmmsg+0xf4/0x3b8 __arm64_sys_sendmmsg+0x34/0x48 invoke_syscall+0x64/0x160 el0_svc_common.constprop.4+0x124/0x300 do_el0_svc+0x44/0xc8 el0_svc+0x3c/0x1e8 el0t_64_sync_handler+0x88/0xb0 el0t_64_sync+0x16c/0x170 Changes since v1: -Change the variable [length] type to unsigned, as Eric Dumazet suggested. Changes since v2: -Don't change exthdrlen type in ip6_make_skb, as Paolo Abeni suggested. Changes since v3: -Don't change ulen type in udpv6_sendmsg and l2tp_ip6_sendmsg, as Jakub Kicinski suggested. Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
-
Xiaohui Zhang authored
Similar to the handling of play_deferred in commit 19cfe912 ("Bluetooth: btusb: Fix memory leak in play_deferred"), we thought a patch might be needed here as well. Currently usb_submit_urb is called directly to submit deferred tx urbs after unanchor them. So the usb_giveback_urb_bh would failed to unref it in usb_unanchor_urb and cause memory leak. Put those urbs in tx_anchor to avoid the leak, and also fix the error handling. Signed-off-by:
Xiaohui Zhang <xiaohuizhang@ruc.edu.cn> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20220607083230.6182-1-xiaohuizhang@ruc.edu.cnSigned-off-by:
-
Jakub Kicinski authored
Martin Faltesek says: ==================== Split "nfc: st21nfca: Refactor EVT_TRANSACTION" into 3 v2: https://lore.kernel.org/netdev/20220401180939.2025819-1-mfaltesek@google.com/ v1: https://lore.kernel.org/netdev/20220329175431.3175472-1-mfaltesek@google.com/ ==================== Link: https://lore.kernel.org/r/20220607025729.1673212-1-mfaltesek@google.comSigned-off-by:
-
Martin Faltesek authored
The transaction buffer is allocated by using the size of the packet buf, and subtracting two which seem intended to remove the two tags which are not present in the target structure. This calculation leads to under counting memory because of differences between the packet contents and the target structure. The aid_len field is a u8 in the packet, but a u32 in the structure, resulting in at least 3 bytes always being under counted. Further, the aid data is a variable length field in the packet, but fixed in the structure, so if this field is less than the max, the difference is added to the under counting. The last validation check for transaction->params_len is also incorrect since it employs the same accounting error. To fix, perform validation checks progressively to safely reach the next field, to determine the size of both buffers and verify both tags. Once all validation checks pass, allocate the buffer and copy the data. This eliminates freeing memory on the error path, as those checks are moved ahead of memory allocation. Fixes: 26fc6c7f ("NFC: st21nfca: Add HCI transaction event support") Fixes: 4fbcc1a4 ("nfc: st21nfca: Fix potential buffer overflows in EVT_TRANSACTION") Cc: stable@vger.kernel.org Signed-off-by:
Martin Faltesek <mfaltesek@google.com> Reviewed-by:
Guenter Roeck <groeck@chromium.org> Reviewed-by:
-
Martin Faltesek authored
Error paths do not free previously allocated memory. Add devm_kfree() to those failure paths. Fixes: 26fc6c7f ("NFC: st21nfca: Add HCI transaction event support") Fixes: 4fbcc1a4 ("nfc: st21nfca: Fix potential buffer overflows in EVT_TRANSACTION") Cc: stable@vger.kernel.org Signed-off-by:
-
Martin Faltesek authored
The first validation check for EVT_TRANSACTION has two different checks tied together with logical AND. One is a check for minimum packet length, and the other is for a valid aid_tag. If either condition is true (fails), then an error should be triggered. The fix is to change && to ||. Fixes: 26fc6c7f ("NFC: st21nfca: Add HCI transaction event support") Cc: stable@vger.kernel.org Signed-off-by:
-
Jakub Kicinski authored
Masahiro Yamada says: ==================== net: unexport some symbols that are annotated __init This patch set fixes odd combinations of EXPORT_SYMBOL and __init. Checking this in modpost is a good thing and I really wanted to do it, but Linus Torvalds imposes a very strict rule, "No new warning". I'd like the maintainer to kindly pick this up and send a fixes pull request. Unless I eliminate all the sites of warnings beforehand, Linus refuses to re-enable the modpost check. [1] [1]: https://lore.kernel.org/linux-kbuild/CAK7LNATmd0bigp7HQ4fTzHw5ugZMkSb3UXG7L4fxpGbqkRKESA@mail.gmail.com/T/#m5e50cc2da17491ba210c72b5efdbc0ce76e0217f ==================== Link: https://lore.kernel.org/r/20220606045355.4160711-1-masahiroy@kernel.orgSigned-off-by:
-
Masahiro Yamada authored
EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it has been broken for a decade. Recently, I fixed modpost so it started to warn it again, then this showed up in linux-next builds. There are two ways to fix it: - Remove __init - Remove EXPORT_SYMBOL I chose the latter for this case because the caller (net/ipv6/seg6.c) and the callee (net/ipv6/seg6_hmac.c) belong to the same module. It seems an internal function call in ipv6.ko. Fixes: bf355b8d ("ipv6: sr: add core files for SR HMAC support") Reported-by:
Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org> Signed-off-by:
-
Masahiro Yamada authored
EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it has been broken for a decade. Recently, I fixed modpost so it started to warn it again, then this showed up in linux-next builds. There are two ways to fix it: - Remove __init - Remove EXPORT_SYMBOL I chose the latter for this case because the only in-tree call-site, net/ipv4/xfrm4_policy.c is never compiled as modular. (CONFIG_XFRM is boolean) Fixes: 2f32b51b ("xfrm: Introduce xfrm_input_afinfo to access the the callbacks properly") Reported-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
Masahiro Yamada authored
EXPORT_SYMBOL and __init is a bad combination because the .init.text section is freed up after the initialization. Hence, modules cannot use symbols annotated __init. The access to a freed symbol may end up with kernel panic. modpost used to detect it, but it has been broken for a decade. Recently, I fixed modpost so it started to warn it again, then this showed up in linux-next builds. There are two ways to fix it: - Remove __init - Remove EXPORT_SYMBOL I chose the latter for this case because the only in-tree call-site, drivers/net/phy/phy_device.c is never compiled as modular. (CONFIG_PHYLIB is boolean) Fixes: 90eff909 ("net: phy: Allow splitting MDIO bus/device support from PHYs") Reported-by:
Florian Fainelli <f.fainelli@gmail.com> Reviewed-by:
-
Quentin Monnet authored
I've been contributing and reviewing patches for bpftool for some time, and I'm taking care of its external mirror. On Alexei, KP, and Daniel's suggestion, I would like to step forwards and become a maintainer for the tool. This patch adds a dedicated entry to MAINTAINERS. Signed-off-by:
Quentin Monnet <quentin@isovalent.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
KP Singh <kpsingh@kernel.org> Acked-by:
Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20220608121428.69708-1-quentin@isovalent.com
-
Maciej Fijalkowski authored
xdpxceiver run on a AF_XDP ZC enabled driver revealed a problem with XSK Tx batching API. There is a test that checks how invalid Tx descriptors are handled by AF_XDP. Each valid descriptor is followed by invalid one on Tx side whereas the Rx side expects only to receive a set of valid descriptors. In current xsk_tx_peek_release_desc_batch() function, the amount of available descriptors is hidden inside xskq_cons_peek_desc_batch(). This can be problematic in cases where invalid descriptors are present due to the fact that xskq_cons_peek_desc_batch() returns only a count of valid descriptors. This means that it is impossible to properly update XSK ring state when calling xskq_cons_release_n(). To address this issue, pull out the contents of xskq_cons_peek_desc_batch() so that callers (currently only xsk_tx_peek_release_desc_batch()) will always be able to update the state of ring properly, as total count of entries is now available and use this value as an argument in xskq_cons_release_n(). By doing so, xskq_cons_peek_desc_batch() can be dropped altogether. Fixes: 9349eb3a ("xsk: Introduce batched Tx descriptor interfaces") Signed-off-by:
Maciej Fijalkowski <maciej.fijalkowski@intel.com> Signed-off-by:
Magnus Karlsson <magnus.karlsson@intel.com> Link: https://lore.kernel.org/bpf/20220607142200.576735-1-maciej.fijalkowski@intel.com
-
Gal Pressman authored
The ioctl EEPROM query wrongly returns success on read failures, fix that by returning the appropriate error code. Fixes: 7202da8b ("ethtool, net/mlx4_en: Cable info, get_module_info/eeprom ethtool support") Signed-off-by:
Gal Pressman <gal@nvidia.com> Signed-off-by:
Tariq Toukan <tariqt@nvidia.com> Link: https://lore.kernel.org/r/20220606115718.14233-1-tariqt@nvidia.comSigned-off-by:
-
Miaoqian Lin authored
Every iteration of for_each_available_child_of_node() decrements the reference count of the previous node. when breaking early from a for_each_available_child_of_node() loop, we need to explicitly call of_node_put() on the gphy_fw_np. Add missing of_node_put() to avoid refcount leak. Fixes: 14fceff4 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfJakub Kicinski authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Fix NAT support for NFPROTO_INET without layer 3 address, from Florian Westphal. 2) Use kfree_rcu(ptr, rcu) variant in nf_tables clean_net path. 3) Use list to collect flowtable hooks to be deleted. 4) Initialize list of hook field in flowtable transaction. 5) Release hooks on error for flowtable updates. 6) Memleak in hardware offload rule commit and abort paths. 7) Early bail out in case device does not support for hardware offload. This adds a new interface to net/core/flow_offload.c to check if the flow indirect block list is empty. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: bail out early if hardware offload is not supported netfilter: nf_tables: memleak flow rule from commit path netfilter: nf_tables: release new hooks on unsupported flowtable flags netfilter: nf_tables: always initialize flowtable hook list in transaction netfilter: nf_tables: delete flowtable hooks via transaction list netfilter: nf_tables: use kfree_rcu(ptr, rcu) to release hooks in clean_net path netfilter: nat: really support inet nat without l3 address ==================== Link: https://lore.kernel.org/r/20220606212055.98300-1-pablo@netfilter.orgSigned-off-by:
-
- 07 Jun, 2022 7 commits
-
-
Toke Høiland-Jørgensen authored
Add a selftest that calls a global function with a context object parameter from an freplace function to check that the program context type is correctly converted to the freplace target when fetching the context type from the kernel BTF. v2: - Trim includes - Get rid of global function - Use __noinline Signed-off-by:
Toke Høiland-Jørgensen <toke@redhat.com> Link: https://lore.kernel.org/r/20220606075253.28422-2-toke@redhat.comSigned-off-by:
-
Toke Høiland-Jørgensen authored
The verifier allows programs to call global functions as long as their argument types match, using BTF to check the function arguments. One of the allowed argument types to such global functions is PTR_TO_CTX; however the check for this fails on BPF_PROG_TYPE_EXT functions because the verifier uses the wrong type to fetch the vmlinux BTF ID for the program context type. This failure is seen when an XDP program is loaded using libxdp (which loads it as BPF_PROG_TYPE_EXT and attaches it to a global XDP type program). Fix the issue by passing in the target program type instead of the BPF_PROG_TYPE_EXT type to bpf_prog_get_ctx() when checking function argument compatibility. The first Fixes tag refers to the latest commit that touched the code in question, while the second one points to the code that first introduced the global function call verification. v2: - Use resolve_prog_type() Fixes: 3363bd0c ("bpf: Extend kfunc with PTR_TO_CTX, PTR_TO_MEM argument support") Fixes: 51c39bb1 ("bpf: Introduce function-by-function verification") Reported-by:
Simon Sundberg <simon.sundberg@kau.se> Signed-off-by:
-
Dan Carpenter authored
The kvmalloc_array() function is safer because it has a check for integer overflows. These sizes come from the user and I was not able to see any bounds checking so an integer overflow seems like a realistic concern. Fixes: 0dcac272 ("bpf: Add multi kprobe link") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Andrii Nakryiko <andrii@kernel.org> Link: https://lore.kernel.org/bpf/Yo9VRVMeHbALyjUH@kiliSigned-off-by:
-
Eric Dumazet authored
syzbot reported an illegal copy_to_user() attempt from bpf_prog_get_info_by_fd() [1] There was no repro yet on this bug, but I think that commit 0aef499f ("mm/usercopy: Detect vmalloc overruns") is exposing a prior bug in bpf arm64. bpf_prog_get_info_by_fd() looks at prog->jited_len to determine if the JIT image can be copied out to user space. My theory is that syzbot managed to get a prog where prog->jited_len has been set to 43, while prog->bpf_func has ben cleared. It is not clear why copy_to_user(uinsns, NULL, ulen) is triggering this particular warning. I thought find_vma_area(NULL) would not find a vm_struct. As we do not hold vmap_area_lock spinlock, it might be possible that the found vm_struct was garbage. [1] usercopy: Kernel memory exposure attempt detected from vmalloc (offset 792633534417210172, size 43)! kernel BUG at mm/usercopy.c:101! Internal error: Oops - BUG: 0 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 25002 Comm: syz-executor.1 Not tainted 5.18.0-syzkaller-10139-g8291eaaf #0 Hardware name: linux,dummy-virt (DT) pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) pc : usercopy_abort+0x90/0x94 mm/usercopy.c:101 lr : usercopy_abort+0x90/0x94 mm/usercopy.c:89 sp : ffff80000b773a20 x29: ffff80000b773a30 x28: faff80000b745000 x27: ffff80000b773b48 x26: 0000000000000000 x25: 000000000000002b x24: 0000000000000000 x23: 00000000000000e0 x22: ffff80000b75db67 x21: 0000000000000001 x20: 000000000000002b x19: ffff80000b75db3c x18: 00000000fffffffd x17: 2820636f6c6c616d x16: 76206d6f72662064 x15: 6574636574656420 x14: 74706d6574746120 x13: 2129333420657a69 x12: 73202c3237313031 x11: 3237313434333533 x10: 3336323937207465 x9 : 657275736f707865 x8 : ffff80000a30c550 x7 : ffff80000b773830 x6 : ffff80000b773830 x5 : 0000000000000000 x4 : ffff00007fbbaa10 x3 : 0000000000000000 x2 : 0000000000000000 x1 : f7ff000028fc0000 x0 : 0000000000000064 Call trace: usercopy_abort+0x90/0x94 mm/usercopy.c:89 check_heap_object mm/usercopy.c:186 [inline] __check_object_size mm/usercopy.c:252 [inline] __check_object_size+0x198/0x36c mm/usercopy.c:214 check_object_size include/linux/thread_info.h:199 [inline] check_copy_size include/linux/thread_info.h:235 [inline] copy_to_user include/linux/uaccess.h:159 [inline] bpf_prog_get_info_by_fd.isra.0+0xf14/0xfdc kernel/bpf/syscall.c:3993 bpf_obj_get_info_by_fd+0x12c/0x510 kernel/bpf/syscall.c:4253 __sys_bpf+0x900/0x2150 kernel/bpf/syscall.c:4956 __do_sys_bpf kernel/bpf/syscall.c:5021 [inline] __se_sys_bpf kernel/bpf/syscall.c:5019 [inline] __arm64_sys_bpf+0x28/0x40 kernel/bpf/syscall.c:5019 __invoke_syscall arch/arm64/kernel/syscall.c:38 [inline] invoke_syscall+0x48/0x114 arch/arm64/kernel/syscall.c:52 el0_svc_common.constprop.0+0x44/0xec arch/arm64/kernel/syscall.c:142 do_el0_svc+0xa0/0xc0 arch/arm64/kernel/syscall.c:206 el0_svc+0x44/0xb0 arch/arm64/kernel/entry-common.c:624 el0t_64_sync_handler+0x1ac/0x1b0 arch/arm64/kernel/entry-common.c:642 el0t_64_sync+0x198/0x19c arch/arm64/kernel/entry.S:581 Code: aa0003e3 d00038c0 91248000 97fff65f (d4210000) Fixes: db496944 ("bpf: arm64: add JIT support for multi-function programs") Reported-by:
Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20220531215113.1100754-1-eric.dumazet@gmail.comSigned-off-by:
-
Lina Wang authored
bpf_helpers.h has been moved to tools/lib/bpf since 5.10, so add more including path. Fixes: edae34a3 ("selftests net: add UDP GRO fraglist + bpf self-tests") Reported-by:
kernel test robot <oliver.sang@intel.com> Signed-off-by:
Lina Wang <lina.wang@mediatek.com> Acked-by:
Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/r/20220606064517.8175-1-lina.wang@mediatek.comSigned-off-by:
-
Kuniyuki Iwashima authored
unix_dgram_poll() calls unix_dgram_peer_wake_me() without `other`'s lock held and check if its receive queue is full. Here we need to use unix_recvq_full_lockless() instead of unix_recvq_full(), otherwise KCSAN will report a data-race. Fixes: 7d267278 ("unix: avoid use-after-free in ep_remove_wait_queue") Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Link: https://lore.kernel.org/r/20220605232325.11804-1-kuniyu@amazon.comSigned-off-by:
-
Christophe JAILLET authored
When the managed API is used, there is no need to explicitly call pci_free_irq_vectors(). This looks to be a left-over from the commit in the Fixes tag. Only the .remove() function had been updated. So remove this unused function call and update goto label accordingly. Fixes: 8accc467 ("stmmac: intel: use managed PCI function on probe and resume") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by:
Wong Vee Khee <vee.khee.wong@linux.intel.com> Link: https://lore.kernel.org/r/1ac9b6787b0db83b0095711882c55c77c8ea8da0.1654462241.git.christophe.jaillet@wanadoo.frSigned-off-by:
-
- 06 Jun, 2022 9 commits
-
-
Miaoqian Lin authored
of_get_child_by_name() returns a node pointer with refcount incremented, we should use of_node_put() on it when not need anymore. Add missing of_node_put() to avoid refcount leak. Fixes: 55954f3b ("net: ethernet: bgmac: move BCMA MDIO Phy code into a separate file") Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Link: https://lore.kernel.org/r/20220603133238.44114-1-linmq006@gmail.comSigned-off-by:
-
Jakub Kicinski authored
Taehee Yoo says: ==================== amt: fix several bugs in amt_rcv() This series fixes bugs in amt_rcv(). First patch fixes pskb_may_pull() issue. Some functions missed to call pskb_may_pull() and uses wrong parameter of pskb_may_pull(). Second patch fixes possible null-ptr-deref in amt_rcv(). If there is no amt private data in sock, skb will be freed. And it increases stats. But in order to increase stats, amt private data is needed. So, uninitialised pointer will be used at that point. Third patch fixes wrong definition of type_str[] in amt.c ==================== Link: https://lore.kernel.org/r/20220602140108.18329-1-ap420073@gmail.comSigned-off-by:
-
Taehee Yoo authored
amt message type definition starts from 1, not 0. But type_str[] starts from 0. So, it prints wrong type information. Fixes: cbc21dc1 ("amt: add data plane of amt interface") Signed-off-by:
Taehee Yoo <ap420073@gmail.com> Signed-off-by:
-
Taehee Yoo authored
When amt interface receives amt message, it tries to obtain amt private data from sock. If there is no amt private data, it frees an skb immediately. After kfree_skb(), it increases the rx_dropped stats. But in order to use rx_dropped, amt private data is needed. So, it makes amt_rcv() to do not increase rx_dropped stats when it can not obtain amt private data. Reported-by:
kernel test robot <lkp@intel.com> Reported-by:
-
Taehee Yoo authored
It adds missing pskb_may_pull() in amt_update_handler() and amt_multicast_data_handler(). And it fixes wrong parameter of pskb_may_pull() in amt_advertisement_handler() and amt_membership_query_handler(). Reported-by:
-
Pablo Neira Ayuso authored
If user requests for NFT_CHAIN_HW_OFFLOAD, then check if either device provides the .ndo_setup_tc interface or there is an indirect flow block that has been registered. Otherwise, bail out early from the preparation phase. Moreover, validate that family == NFPROTO_NETDEV and hook is NF_NETDEV_INGRESS. Fixes: c9626a2c ("netfilter: nf_tables: add hardware offload support") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Tan Tee Min authored
There is a limitation in TI DP83867 PHY device where SGMII AN is only triggered once after the device is booted up. Even after the PHY TPI is down and up again, SGMII AN is not triggered and hence no new in-band message from PHY to MAC side SGMII. This could cause an issue during power up, when PHY is up prior to MAC. At this condition, once MAC side SGMII is up, MAC side SGMII wouldn`t receive new in-band message from TI PHY with correct link status, speed and duplex info. As suggested by TI, implemented a SW solution here to retrigger SGMII Auto-Neg whenever there is a link change. v2: Add Fixes tag in commit message. Fixes: 2a10154a ("net: phy: dp83867: Add TI dp83867 phy") Cc: <stable@vger.kernel.org> # 5.4.x Signed-off-by:
Sit, Michael Wei Hong <michael.wei.hong.sit@intel.com> Reviewed-by:
Voon Weifeng <weifeng.voon@intel.com> Signed-off-by:
Tan Tee Min <tee.min.tan@linux.intel.com> Reviewed-by:
-
Pablo Neira Ayuso authored
Abort path release flow rule object, however, commit path does not. Update code to destroy these objects before releasing the transaction. Fixes: c9626a2c ("netfilter: nf_tables: add hardware offload support") Signed-off-by:
-
Pablo Neira Ayuso authored
Release the list of new hooks that are pending to be registered in case that unsupported flowtable flags are provided. Fixes: 78d9f48f ("netfilter: nf_tables: add devices to existing flowtable") Signed-off-by:
-
- 02 Jun, 2022 1 commit
-
-
Pablo Neira Ayuso authored
The hook list is used if nft_trans_flowtable_update(trans) == true. However, initialize this list for other cases for safety reasons. Fixes: 78d9f48f ("netfilter: nf_tables: add devices to existing flowtable") Signed-off-by:
-
