- 10 Oct, 2014 38 commits
-
-
Oleg Nesterov authored
I do not know if CONFIG_PREEMPT/SMP is possible without CONFIG_MMU but the usage of task->mm in m_stop(). The task can exit/exec before we take mmap_sem, in this case m_stop() can hit NULL or unlock the wrong rw_semaphore. Also, this code uses priv->task != NULL to decide whether we need up_read/mmput. This is correct, but we will probably kill priv->task. Change m_start/m_stop to rely on IS_ERR_OR_NULL() like task_mmu.c does. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Acked-by:
Greg Ungerer <gerg@uclinux.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Oleg Nesterov authored
Copy-and-paste the changes from "fs/proc/task_mmu.c: shift mm_access() from m_start() to proc_maps_open()" into task_nommu.c. Change maps_open() to initialize priv->mm using proc_mem_open(), m_start() can rely on atomic_inc_not_zero(mm_users) like task_mmu.c does. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
-
Oleg Nesterov authored
Cleanup and preparation. maps_open() can use __seq_open_private() like proc_maps_open() does. [akpm@linux-foundation.org: deuglify] Signed-off-by:
-
Oleg Nesterov authored
Change the main loop in m_start() to update m->version. Mostly for consistency, but this can help to avoid the same loop if the very 1st ->show() fails due to seq_overflow(). Signed-off-by:
-
Oleg Nesterov authored
Add the "last_addr" optimization back. Like before, every ->show() method checks !seq_overflow() and sets m->version = vma->vm_start. However, it also checks that m_next_vma(vma) != NULL, otherwise it sets m->version = -1 for the lockless "EOF" fast-path in m_start(). m_start() can simply do find_vma() + m_next_vma() if last_addr is not zero, the code looks clear and simple and this case is clearly separated from "scan vmas" path. Signed-off-by:
-
Oleg Nesterov authored
Extract the tail_vma/vm_next calculation from m_next() into the new trivial helper, m_next_vma(). Signed-off-by:
-
Oleg Nesterov authored
Now that m->version is gone we can cleanup m_start(). In particular, - Remove the "unsigned long" typecast, m->index can't be negative or exceed ->map_count. But lets use "unsigned int pos" to make it clear that "pos < map_count" is safe. - Remove the unnecessary "vma != NULL" check in the main loop. It can't be NULL unless we have a vm bug. - This also means that "pos < map_count" case can simply return the valid vma and avoid "goto" and subsequent checks. Signed-off-by: -
Oleg Nesterov authored
m_start() carefully documents, checks, and sets "m->version = -1" if we are going to return NULL. The only problem is that we will be never called again if m_start() returns NULL, so this is simply pointless and misleading. Otoh, ->show() methods m->version = 0 if vma == tail_vma and this is just wrong, we want -1 in this case. And in fact we also want -1 if ->vm_next == NULL and ->tail_vma == NULL. And it is not used consistently, the "scan vmas" loop in m_start() should update last_addr too. Finally, imo the whole "last_addr" logic in m_start() looks horrible. find_vma(last_addr) is called unconditionally even if we are not going to use the result. But the main problem is that this code participates in tail_vma-or-NULL mess, and this looks simply unfixable. Remove this optimization. We will add it back after some cleanups. Signed-off-by:
-
Oleg Nesterov authored
1. There is no reason to reset ->tail_vma in m_start(), if we return IS_ERR_OR_NULL() it won't be used. 2. m_start() also clears priv->task to ensure that m_stop() won't use the stale pointer if we fail before get_task_struct(). But this is ugly and confusing, move this initialization in m_stop(). Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by:
Cyrill Gorcunov <gorcunov@openvz.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by:
-
Oleg Nesterov authored
1. Kill the first "vma != NULL" check. Firstly this is not possible, m_next() won't be called if ->start() or the previous ->next() returns NULL. And if it was possible the 2nd "vma != tail_vma" check is buggy, we should not wrongly return ->tail_vma. 2. Make this function readable. The logic is very simple, we should return check "vma != tail" once and return "vm_next || tail_vma". Signed-off-by:
-
Oleg Nesterov authored
m_start() drops ->mmap_sem and does mmput() if it retuns vsyscall vma. This is because in this case m_stop()->vma_stop() obviously can't use gate_vma->vm_mm. Now that we have proc_maps_private->mm we can simplify this logic: - Change m_start() to return with ->mmap_sem held unless it returns IS_ERR_OR_NULL(). - Change vma_stop() to use priv->mm and avoid the ugly vma checks, this makes "vm_area_struct *vma" unnecessary. - This also allows m_start() to use vm_stop(). - Cleanup m_next() to follow the new locking rule. Note: m_stop() looks very ugly, and this temporary uglifies it even more. Fixed by the next change. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: -
Oleg Nesterov authored
A simple test-case from Kirill Shutemov cat /proc/self/maps >/dev/null chmod +x /proc/self/net/packet exec /proc/self/net/packet makes lockdep unhappy, cat/exec take seq_file->lock + cred_guard_mutex in the opposite order. It's a false positive and probably we should not allow "chmod +x" on proc files. Still I think that we should avoid mm_access() and cred_guard_mutex in sys_read() paths, security checking should happen at open time. Besides, this doesn't even look right if the task changes its ->mm between m_stop() and m_start(). Add the new "mm_struct *mm" member into struct proc_maps_private and change proc_maps_open() to initialize it using proc_mem_open(). Change m_start() to use priv->mm if atomic_inc_not_zero(mm_users) succeeds or return NULL (eof) otherwise. The only complication is that proc_maps_open() users should additionally do mmdrop() in fop->release(), add the new proc_map_release() helper for that. Note: this is the user-visible change, if the task execs after open("maps") the new ->mm won't be visible via this file. I hope this is fine, and this matches /proc/pid/mem bahaviour. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:"Kirill A. Shutemov" <kirill@shutemov.name> Acked-by:
-
Oleg Nesterov authored
Extract the mm_access() code from __mem_open() into the new helper, proc_mem_open(), the next patch will add another caller. Signed-off-by:
-
Oleg Nesterov authored
do_maps_open() and numa_maps_open() are overcomplicated, they could use __seq_open_private(). Plus they do the same, just sizeof(*priv) Change them to use a new simple helper, proc_maps_open(ops, psize). This simplifies the code and allows us to do the next changes. Signed-off-by:
-
Oleg Nesterov authored
get_gate_vma(priv->task->mm) looks ugly and wrong, task->mm can be NULL or it can changed by exec right after mm_access(). And in theory this race is not harmless, the task can exec and then later exit and free the new mm_struct. In this case get_task_mm(oldmm) can't help, get_gate_vma(task->mm) can read the freed/unmapped memory. I think that priv->task should simply die and hold_task_mempolicy() logic can be simplified. tail_vma logic asks for cleanups too. Signed-off-by:
-
chai wen authored
For now, soft lockup detector warns once for each case of process softlockup. But the thread 'watchdog/n' may not always get the cpu at the time slot between the task switch of two processes hogging that cpu to reset soft_watchdog_warn. An example would be two processes hogging the cpu. Process A causes the softlockup warning and is killed manually by a user. Process B immediately becomes the new process hogging the cpu preventing the softlockup code from resetting the soft_watchdog_warn variable. This case is a false negative of "warn only once for a process", as there may be a different process that is going to hog the cpu. Resolve this by saving/checking the task pointer of the hogging process and use that to reset soft_watchdog_warn too. [dzickus@redhat.com: update comment] Signed-off-by:
chai wen <chaiw.fnst@cn.fujitsu.com> Signed-off-by:
Don Zickus <dzickus@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Junxiao Bi authored
For commit ocfs2 journal, ocfs2 journal thread will acquire the mutex osb->journal->j_trans_barrier and wake up jbd2 commit thread, then it will wait until jbd2 commit thread done. In order journal mode, jbd2 needs flushing dirty data pages first, and this needs get page lock. So osb->journal->j_trans_barrier should be got before page lock. But ocfs2_write_zero_page() and ocfs2_write_begin_inline() obey this locking order, and this will cause deadlock and hung the whole cluster. One deadlock catched is the following: PID: 13449 TASK: ffff8802e2f08180 CPU: 31 COMMAND: "oracle" #0 [ffff8802ee3f79b0] __schedule at ffffffff8150a524 #1 [ffff8802ee3f7a58] schedule at ffffffff8150acbf #2 [ffff8802ee3f7a68] rwsem_down_failed_common at ffffffff8150cb85 #3 [ffff8802ee3f7ad8] rwsem_down_read_failed at ffffffff8150cc55 #4 [ffff8802ee3f7ae8] call_rwsem_down_read_failed at ffffffff812617a4 #5 [ffff8802ee3f7b50] ocfs2_start_trans at ffffffffa0498919 [ocfs2] #6 [ffff8802ee3f7ba0] ocfs2_zero_start_ordered_transaction at ffffffffa048b2b8 [ocfs2] #7 [ffff8802ee3f7bf0] ocfs2_write_zero_page at ffffffffa048e9bd [ocfs2] #8 [ffff8802ee3f7c80] ocfs2_zero_extend_range at ffffffffa048ec83 [ocfs2] #9 [ffff8802ee3f7ce0] ocfs2_zero_extend at ffffffffa048edfd [ocfs2] #10 [ffff8802ee3f7d50] ocfs2_extend_file at ffffffffa049079e [ocfs2] #11 [ffff8802ee3f7da0] ocfs2_setattr at ffffffffa04910ed [ocfs2] #12 [ffff8802ee3f7e70] notify_change at ffffffff81187d29 #13 [ffff8802ee3f7ee0] do_truncate at ffffffff8116bbc1 #14 [ffff8802ee3f7f50] sys_ftruncate at ffffffff8116bcbd #15 [ffff8802ee3f7f80] system_call_fastpath at ffffffff81515142 RIP: 00007f8de750c6f7 RSP: 00007fffe786e478 RFLAGS: 00000206 RAX: 000000000000004d RBX: ffffffff81515142 RCX: 0000000000000000 RDX: 0000000000000200 RSI: 0000000000028400 RDI: 000000000000000d RBP: 00007fffe786e040 R8: 0000000000000000 R9: 000000000000000d R10: 0000000000000000 R11: 0000000000000206 R12: 000000000000000d R13: 00007fffe786e710 R14: 00007f8de70f8340 R15: 0000000000028400 ORIG_RAX: 000000000000004d CS: 0033 SS: 002b crash64> bt PID: 7610 TASK: ffff88100fd56140 CPU: 1 COMMAND: "ocfs2cmt" #0 [ffff88100f4d1c50] __schedule at ffffffff8150a524 #1 [ffff88100f4d1cf8] schedule at ffffffff8150acbf #2 [ffff88100f4d1d08] jbd2_log_wait_commit at ffffffffa01274fd [jbd2] #3 [ffff88100f4d1d98] jbd2_journal_flush at ffffffffa01280b4 [jbd2] #4 [ffff88100f4d1dd8] ocfs2_commit_cache at ffffffffa0499b14 [ocfs2] #5 [ffff88100f4d1e38] ocfs2_commit_thread at ffffffffa0499d38 [ocfs2] #6 [ffff88100f4d1ee8] kthread at ffffffff81090db6 #7 [ffff88100f4d1f48] kernel_thread_helper at ffffffff81516284 crash64> bt PID: 7609 TASK: ffff88100f2d4480 CPU: 0 COMMAND: "jbd2/dm-20-86" #0 [ffff88100def3920] __schedule at ffffffff8150a524 #1 [ffff88100def39c8] schedule at ffffffff8150acbf #2 [ffff88100def39d8] io_schedule at ffffffff8150ad6c #3 [ffff88100def39f8] sleep_on_page at ffffffff8111069e #4 [ffff88100def3a08] __wait_on_bit_lock at ffffffff8150b30a #5 [ffff88100def3a58] __lock_page at ffffffff81110687 #6 [ffff88100def3ab8] write_cache_pages at ffffffff8111b752 #7 [ffff88100def3be8] generic_writepages at ffffffff8111b901 #8 [ffff88100def3c48] journal_submit_data_buffers at ffffffffa0120f67 [jbd2] #9 [ffff88100def3cf8] jbd2_journal_commit_transaction at ffffffffa0121372[jbd2] #10 [ffff88100def3e68] kjournald2 at ffffffffa0127a86 [jbd2] #11 [ffff88100def3ee8] kthread at ffffffff81090db6 #12 [ffff88100def3f48] kernel_thread_helper at ffffffff81516284 Signed-off-by:Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Alex Chen <alex.chen@huawei.com> Signed-off-by:
-
Joseph Qi authored
The following case may lead to o2net_wq and o2hb thread deadlock on o2hb_callback_sem. Currently there are 2 nodes say N1, N2 in the cluster. And N2 down, at the same time, N3 tries to join the cluster. So N1 will handle node down (N2) and join (N3) simultaneously. o2hb o2net_wq ->o2hb_do_disk_heartbeat ->o2hb_check_slot ->o2hb_run_event_list ->o2hb_fire_callbacks ->down_write(&o2hb_callback_sem) ->o2net_hb_node_down_cb ->flush_workqueue(o2net_wq) ->o2net_process_message ->dlm_query_join_handler ->o2hb_check_node_heartbeating ->o2hb_fill_node_map ->down_read(&o2hb_callback_sem) No need to take o2hb_callback_sem in dlm_query_join_handler, o2hb_live_lock is enough to protect live node map. Signed-off-by:Joseph Qi <joseph.qi@huawei.com> Cc: xMark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: jiangyiwen <jiangyiwen@huawei.com> Signed-off-by:
-
Junxiao Bi authored
Firing quorum before connection established can cause unexpected node to reboot. Assume there are 3 nodes in the cluster, Node 1, 2, 3. Node 2 and 3 have wrong ip address of Node 1 in cluster.conf and global heartbeat is enabled in the cluster. After the heatbeats are started on these three nodes, Node 1 will reboot due to quorum fencing. It is similar case if Node 1's networking is not ready when starting the global heartbeat. The reboot is not friendly as customer is not fully ready for ocfs2 to work. Fix it by not allowing firing quorum before the connection is established. In this case, ocfs2 will wait until the wrong configuration is fixed or networking is up to continue. Also update the log to guide the user where to check when connection is not built for a long time. Signed-off-by:
Srinivas Eeda <srinivas.eeda@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by:
-
Rob Jones authored
Reduce boilerplate code by using seq_open_private() instead of seq_open() Signed-off-by:
Rob Jones <rob.jones@codethink.co.uk> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by:
-
Rob Jones authored
Reduce boilerplate code by using seq_open_private() instead of seq_open() Note that the code in and using sc_common_open() has been quite extensively changed. Not least because there was a latent memory leak in the code as was: if sc_common_open() failed, the previously allocated buffer was not freed. Signed-off-by:
-
Rob Jones authored
Reduce boilerplate code by using seq_open_private() instead of seq_open() Signed-off-by:
-
Xue jiufei authored
Remove the branch that free res->lockname.name because the condition is never satisfied when jump to label error. Signed-off-by:
joyce.xue <xuejiufei@huawei.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
alex chen authored
dlm_lockres_put() should be called without &res->spinlock, otherwise a deadlock case may happen. spin_lock(&res->spinlock) ... dlm_lockres_put ->dlm_lockres_release ->dlm_print_one_lock_resource ->spin_lock(&res->spinlock) Signed-off-by:Alex Chen <alex.chen@huawei.com> Reviewed-by:
-
Joseph Qi authored
In o2net_init, if malloc failed, it directly returns -ENOMEM. Then o2quo_exit won't be called in init_o2nm. Signed-off-by:
-
Joseph Qi authored
ocfs2_inode_info->ip_clusters and ocfs2_dinode->id1.bitmap1.i_total are defined as type u32, so the shift left operations may overflow if volume size is large, for example, 2TB and cluster size is 1MB. Signed-off-by:
-
Joseph Qi authored
Refactoring error handling in dlm_alloc_ctxt to simplify code. Signed-off-by:
-
Andrew Morton authored
It is supposed to zero pv_minor. Reported-by:
Himangi Saraogi <himangi774@gmail.com> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
Geert Uytterhoeven authored
Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
Lennox Wu <lennox.wu@gmail.com> Signed-off-by:
-
Andrea Gelmini authored
fs/ntfs/debug.c:124: WARNING: space prohibited between function name and open parenthesis '(' Signed-off-by:Andrea Gelmini <andrea.gelmini@gelma.net> Signed-off-by:
Anton Altaparmakov <anton@tuxera.com> Signed-off-by:
-
Anton Altaparmakov authored
Mel Gorman's commit 2457aec6 ("mm: non-atomically mark page accessed during page cache allocation where possible") removed mark_page_accessed() calls from NTFS without updating the matching find_lock_page() to find_get_page_flags(GFP_LOCK | FGP_ACCESSED) thus causing the page to never be marked accessed. This patch fixes that. Signed-off-by:
-
Michael Opdenacker authored
This patch removes the use of the IRQF_DISABLED flag from arch/m32r/kernel/time.c It's a NOOP since 2.6.35 and it will be removed one day. Signed-off-by:
Michael Opdenacker <michael.opdenacker@free-electrons.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by:
-
Geert Uytterhoeven authored
Signed-off-by:
-
Yann Droneaud authored
According to commit 80af2588 ("fanotify: groups can specify their f_flags for new fd"), file descriptors created as part of file access notification events inherit flags from the event_f_flags argument passed to syscall fanotify_init(2)[1]. Unfortunately O_CLOEXEC is currently silently ignored. Indeed, event_f_flags are only given to dentry_open(), which only seems to care about O_ACCMODE and O_PATH in do_dentry_open(), O_DIRECT in open_check_o_direct() and O_LARGEFILE in generic_file_open(). It's a pity, since, according to some lookup on various search engines and http://codesearch.debian.net/, there's already some userspace code which use O_CLOEXEC: - in systemd's readahead[2]: fanotify_fd = fanotify_init(FAN_CLOEXEC|FAN_NONBLOCK, O_RDONLY|O_LARGEFILE|O_CLOEXEC|O_NOATIME); - in clsync[3]: #define FANOTIFY_EVFLAGS (O_LARGEFILE|O_RDONLY|O_CLOEXEC) int fanotify_d = fanotify_init(FANOTIFY_FLAGS, FANOTIFY_EVFLAGS); - in examples [4] from "Filesystem monitoring in the Linux kernel" article[5] by Aleksander Morgado: if ((fanotify_fd = fanotify_init (FAN_CLOEXEC, O_RDONLY | O_CLOEXEC | O_LARGEFILE)) < 0) Additionally, since commit 48149e9d ("fanotify: check file flags passed in fanotify_init"). having O_CLOEXEC as part of fanotify_init() second argument is expressly allowed. So it seems expected to set close-on-exec flag on the file descriptors if userspace is allowed to request it with O_CLOEXEC. But Andrew Morton raised[6] the concern that enabling now close-on-exec might break existing applications which ask for O_CLOEXEC but expect the file descriptor to be inherited across exec(). In the other hand, as reported by Mihai Dontu[7] close-on-exec on the file descriptor returned as part of file access notify can break applications due to deadlock. So close-on-exec is needed for most applications. More, applications asking for close-on-exec are likely expecting it to be enabled, relying on O_CLOEXEC being effective. If not, it might weaken their security, as noted by Jan Kara[8]. So this patch replaces call to macro get_unused_fd() by a call to function get_unused_fd_flags() with event_f_flags value as argument. This way O_CLOEXEC flag in the second argument of fanotify_init(2) syscall is interpreted and close-on-exec get enabled when requested. [1] http://man7.org/linux/man-pages/man2/fanotify_init.2.html [2] http://cgit.freedesktop.org/systemd/systemd/tree/src/readahead/readahead-collect.c?id=v208#n294 [3] https://github.com/xaionaro/clsync/blob/v0.2.1/sync.c#L1631 https://github.com/xaionaro/clsync/blob/v0.2.1/configuration.h#L38 [4] http://www.lanedo.com/~aleksander/fanotify/fanotify-example.c [5] http://www.lanedo.com/2013/filesystem-monitoring-linux-kernel/ [6] http://lkml.kernel.org/r/20141001153621.65e9258e65a6167bf2e4cb50@linux-foundation.org [7] http://lkml.kernel.org/r/20141002095046.3715eb69@mdontu-l [8] http://lkml.kernel.org/r/20141002104410.GB19748@quack.suse.cz Link: http://lkml.kernel.org/r/cover.1411562410.git.ydroneaud@opteya.comSigned-off-by:
Yann Droneaud <ydroneaud@opteya.com> Reviewed-by:
Jan Kara <jack@suse.cz> Reviewed by: Heinrich Schuchardt <xypron.glpk@gmx.de> Tested-by:
Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Mihai Don\u021bu <mihai.dontu@gmail.com> Cc: Pádraig Brady <P@draigBrady.com> Cc: Heinrich Schuchardt <xypron.glpk@gmx.de> Cc: Jan Kara <jack@suse.cz> Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Michael Kerrisk-manpages <mtk.manpages@gmail.com> Cc: Lino Sanfilippo <LinoSanfilippo@gmx.de> Cc: Richard Guy Briggs <rgb@redhat.com> Cc: Eric Paris <eparis@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Sasha Levin authored
On some failure paths we may attempt to free user context even if it wasn't assigned yet. This will cause a NULL ptr deref and a kernel BUG. The path I was looking at is in inotify_new_group(): oevent = kmalloc(sizeof(struct inotify_event_info), GFP_KERNEL); if (unlikely(!oevent)) { fsnotify_destroy_group(group); return ERR_PTR(-ENOMEM); } fsnotify_destroy_group() would get called here, but group->inotify_data.user is only getting assigned later: group->inotify_data.user = get_current_user(); Signed-off-by:Sasha Levin <sasha.levin@oracle.com> Cc: John McCutchan <john@johnmccutchan.com> Cc: Robert Love <rlove@rlove.org> Cc: Eric Paris <eparis@parisplace.org> Reviewed-by:
-
Andrew Morton authored
No callers outside this file. Cc: Sasha Levin <sasha.levin@oracle.com> Signed-off-by:
-
Geert Uytterhoeven authored
Signed-off-by:
Jesper Nilsson <jesper.nilsson@axis.com> Signed-off-by:
-
Geert Uytterhoeven authored
Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
- 09 Oct, 2014 2 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq updates from Thomas Gleixner: "The irq departement delivers: - a cleanup series to get rid of mindlessly copied code. - another bunch of new pointlessly different interrupt chip drivers. Adding homebrewn irq chips (and timers) to SoCs must provide a value add which is beyond the imagination of mere mortals. - the usual SoC irq controller updates, IOW my second cat herding project" * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits) irqchip: gic-v3: Implement CPU PM notifier irqchip: gic-v3: Refactor gic_enable_redist to support both enabling and disabling irqchip: renesas-intc-irqpin: Add minimal runtime PM support irqchip: renesas-intc-irqpin: Add helper variable dev = &pdev->dev irqchip: atmel-aic5: Add sama5d4 support irqchip: atmel-aic5: The sama5d3 has 48 IRQs Documentation: bcm7120-l2: Add Broadcom BCM7120-style L2 binding irqchip: bcm7120-l2: Add Broadcom BCM7120-style Level 2 interrupt controller irqchip: renesas-irqc: Add binding docs for new R-Car Gen2 SoCs irqchip: renesas-irqc: Add DT binding documentation irqchip: renesas-intc-irqpin: Document SoC-specific bindings openrisc: Get rid of handle_IRQ arm64: Get rid of handle_IRQ ARM: omap2: irq: Convert to handle_domain_irq ARM: imx: tzic: Convert to handle_domain_irq ARM: imx: avic: Convert to handle_domain_irq irqchip: or1k-pic: Convert to handle_domain_irq irqchip: atmel-aic5: Convert to handle_domain_irq irqchip: atmel-aic: Convert to handle_domain_irq irqchip: gic-v3: Convert to handle_domain_irq ... -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer updates from Thomas Gleixner: "Nothing really exciting this time: - a few fixlets in the NOHZ code - a new ARM SoC timer abomination. One should expect that we have enough of them already, but they insist on inventing new ones. - the usual bunch of ARM SoC timer updates. That feels like herding cats" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: clocksource: arm_arch_timer: Consolidate arch_timer_evtstrm_enable clocksource: arm_arch_timer: Enable counter access for 32-bit ARM clocksource: arm_arch_timer: Change clocksource name if CP15 unavailable clocksource: sirf: Disable counter before re-setting it clocksource: cadence_ttc: Add support for 32bit mode clocksource: tcb_clksrc: Sanitize IRQ request clocksource: arm_arch_timer: Discard unavailable timers correctly clocksource: vf_pit_timer: Support shutdown mode ARM: meson6: clocksource: Add Meson6 timer support ARM: meson: documentation: Add timer documentation clocksource: sh_tmu: Document r8a7779 binding clocksource: sh_mtu2: Document r7s72100 binding clocksource: sh_cmt: Document SoC specific bindings timerfd: Remove an always true check nohz: Avoid tick's double reprogramming in highres mode nohz: Fix spurious periodic tick behaviour in low-res dynticks mode
-
