- 09 Jun, 2023 31 commits
-
-
Haifeng Xu authored
Since commit 60e2793d ("mm, oom: do not trigger out_of_memory from the #PF"), no user sets gfp_mask to 0. Remove the 0 mask check and update the comments. Link: https://lkml.kernel.org/r/20230508073538.1168-1-haifeng.xu@shopee.comSigned-off-by:
Haifeng Xu <haifeng.xu@shopee.com> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Shakeel Butt <shakeelb@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org>
-
Kefeng Wang authored
There is already a memory_failure_init(), don't add a new initcall, move register_sysctl_init() into it to cleanup a bit. Link: https://lkml.kernel.org/r/20230508114128.37081-2-wangkefeng.wang@huawei.comSigned-off-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Acked-by:
Naoya Horiguchi <naoya.horiguchi@nec.com> Signed-off-by:
-
Kefeng Wang authored
The memory_failure_attr_group is only called if MEMORY_FAILURE enabled, move it under this configuration. Link: https://lkml.kernel.org/r/20230508114128.37081-1-wangkefeng.wang@huawei.comSigned-off-by:
-
Pasha Tatashin authored
HugeTLB pages have a struct page optimizations where struct pages for tail pages are freed. However, when HugeTLB pages are destroyed, the memory for struct pages (vmemmap) need to be allocated again. Currently, __GFP_NORETRY flag is used to allocate the memory for vmemmap, but given that this flag makes very little effort to actually reclaim memory the returning of huge pages back to the system can be problem. Lets use __GFP_RETRY_MAYFAIL instead. This flag is also performs graceful reclaim without causing ooms, but at least it may perform a few retries, and will fail only when there is genuinely little amount of unused memory in the system. Freeing a 1G page requires 16M of free memory. A machine might need to be reconfigured from one task to another, and release a large number of 1G pages back to the system if allocating 16M fails, the release won't work. Link: https://lkml.kernel.org/r/20230508234059.2529638-1-pasha.tatashin@soleen.comSigned-off-by:
Pasha Tatashin <pasha.tatashin@soleen.com> Suggested-by:
David Rientjes <rientjes@google.com> Reviewed-by:
Mike Kravetz <mike.kravetz@oracle.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Muchun Song <muchun.song@linux.dev> Signed-off-by:
-
Arnd Bergmann authored
gcc-13 warns about function definitions for builtin interfaces that have a different prototype, e.g.: In file included from kasan_test.c:31: kasan.h:574:6: error: conflicting types for built-in function '__asan_register_globals'; expected 'void(void *, long int)' [-Werror=builtin-declaration-mismatch] 574 | void __asan_register_globals(struct kasan_global *globals, size_t size); kasan.h:577:6: error: conflicting types for built-in function '__asan_alloca_poison'; expected 'void(void *, long int)' [-Werror=builtin-declaration-mismatch] 577 | void __asan_alloca_poison(unsigned long addr, size_t size); kasan.h:580:6: error: conflicting types for built-in function '__asan_load1'; expected 'void(void *)' [-Werror=builtin-declaration-mismatch] 580 | void __asan_load1(unsigned long addr); kasan.h:581:6: error: conflicting types for built-in function '__asan_store1'; expected 'void(void *)' [-Werror=builtin-declaration-mismatch] 581 | void __asan_store1(unsigned long addr); kasan.h:643:6: error: conflicting types for built-in function '__hwasan_tag_memory'; expected 'void(void *, unsigned char, long int)' [-Werror=builtin-declaration-mismatch] 643 | void __hwasan_tag_memory(unsigned long addr, u8 tag, unsigned long size); The two problems are: - Addresses are passes as 'unsigned long' in the kernel, but gcc-13 expects a 'void *'. - sizes meant to use a signed ssize_t rather than size_t. Change all the prototypes to match these. Using 'void *' consistently for addresses gets rid of a couple of type casts, so push that down to the leaf functions where possible. This now passes all randconfig builds on arm, arm64 and x86, but I have not tested it on the other architectures that support kasan, since they tend to fail randconfig builds in other ways. This might fail if any of the 32-bit architectures expect a 'long' instead of 'int' for the size argument. The __asan_allocas_unpoison() function prototype is somewhat weird, since it uses a pointer for 'stack_top' and an size_t for 'stack_bottom'. This looks like it is meant to be 'addr' and 'size' like the others, but the implementation clearly treats them as 'top' and 'bottom'. Link: https://lkml.kernel.org/r/20230509145735.9263-2-arnd@kernel.orgSigned-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: Alexander Potapenko <glider@google.com> Cc: Andrey Konovalov <andreyknvl@gmail.com> Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Marco Elver <elver@google.com> Cc: Vincenzo Frascino <vincenzo.frascino@arm.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Arnd Bergmann authored
The kasan sw-tags implementation contains one function that is only called from assembler and has no prototype in a header. This causes a W=1 warning: mm/kasan/sw_tags.c:171:6: warning: no previous prototype for 'kasan_tag_mismatch' [-Wmissing-prototypes] 171 | void kasan_tag_mismatch(unsigned long addr, unsigned long access_info, Add a prototype in the local header to get a clean build. Link: https://lkml.kernel.org/r/20230509145735.9263-1-arnd@kernel.orgSigned-off-by:
-
Huang Ying authored
After recent changes to the retrying and failure counting in migrate_pages_batch(), it was found that it's unnecessary to count retrying and failure for normal, large, and THP folios separately. Because we don't use retrying and failure number of large folios directly. So, in this patch, we simplified retrying and failure counting of large folios via counting retrying and failure of normal and large folios together. This results in the reduced line number. Previously, in migrate_pages_batch we need to track whether the source folio is large/THP before splitting. So is_large is used to cache folio_test_large() result. Now, we don't need that variable any more because we don't count retrying and failure of large folios (only counting that of THP folios). So, in this patch, is_large is removed to simplify the code. This is just code cleanup, no functionality changes are expected. Link: https://lkml.kernel.org/r/20230510031829.11513-1-ying.huang@intel.comSigned-off-by:
"Huang, Ying" <ying.huang@intel.com> Reviewed-by:
Xin Hao <xhao@linux.alibaba.com> Reviewed-by:
Zi Yan <ziy@nvidia.com> Reviewed-by:
Alistair Popple <apopple@nvidia.com> Cc: Yang Shi <shy828301@gmail.com> Cc: Baolin Wang <baolin.wang@linux.alibaba.com> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by:
-
Rick Wertenbroek authored
The format string in __add_pages and __remove_pages has a typo and prints e.g., "Misaligned __add_pages start: 0xfc605 end: #fc609" instead of "Misaligned __add_pages start: 0xfc605 end: 0xfc609" Fix "#%lx" => "%#lx" Link: https://lkml.kernel.org/r/20230510090758.3537242-1-rick.wertenbroek@gmail.comSigned-off-by:
Rick Wertenbroek <rick.wertenbroek@gmail.com> Reviewed-by:
David Hildenbrand <david@redhat.com> Reviewed-by:
Mike Rapoport (IBM) <rppt@kernel.org> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by:
-
Pankaj Raghav authored
page_endio() is not used anymore. Remove it. Link: https://lkml.kernel.org/r/20230510124716.73655-1-p.raghav@samsung.comSigned-off-by:
Pankaj Raghav <p.raghav@samsung.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Acked-by:
Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by:
-
Peng Zhang authored
Check the write offset end bounds before using it as the offset into the pivot array. This avoids a possible out-of-bounds access on the pivot array if the write extends to the last slot in the node, in which case the node maximum should be used as the end pivot. akpm: this doesn't affect any current callers, but new users of mapletree may encounter this problem if backported into earlier kernels, so let's fix it in -stable kernels in case of this. Link: https://lkml.kernel.org/r/20230506024752.2550-1-zhangpeng.00@bytedance.com Fixes: 54a611b6 ("Maple Tree: add new data structure") Signed-off-by:
Peng Zhang <zhangpeng.00@bytedance.com> Reviewed-by:
Liam R. Howlett <Liam.Howlett@oracle.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Lorenzo Stoakes authored
All other instances of gup_huge_pXd() perform the unshare check, so update the PGD-specific function to do so as well. While checking pgd_write() might seem unusual, this function already performs such a check via pgd_access_permitted() so this is in line with the existing implementation. David said: : This change makes unshare handling across all GUP-fast variants : consistent, which is desirable as GUP-fast is complicated enough : already even when consistent. : : This function was the only one I seemed to have missed (or left out and : forgot why -- maybe because it's really dead code for now). The COW : selftest would identify the problem, so far there was no report. : Either the selftest wasn't run on corresponding architectures with that : hugetlb size, or that code is still dead code and unused by : architectures. : : the original commit(s) that added unsharing explain why we care about : these checks: : : a7f22660 ("mm/gup: trigger FAULT_FLAG_UNSHARE when R/O-pinning a possibly shared anonymous page") : 84209e87 ("mm/gup: reliable R/O long-term pinning in COW mappings") Link: https://lkml.kernel.org/r/cb971ac8dd315df97058ea69442ecc007b9a364a.1683381545.git.lstoakes@gmail.comSigned-off-by:
Lorenzo Stoakes <lstoakes@gmail.com> Suggested-by:
-
Keith Busch authored
Set the 'empty' bool directly from the result of the function that determines its value instead of adding additional logic. Link: https://lkml.kernel.org/r/20230126215125.4069751-13-kbusch@meta.com Fixes: 2d55c16c ("dmapool: create/destroy cleanup") Signed-off-by:
Keith Busch <kbusch@kernel.org> Reviewed-by:
-
Ackerley Tng authored
Calling hugetlb_set_vma_policy() later avoids setting the vma policy and then dropping it on a page cache hit. Link: https://lkml.kernel.org/r/20230502235622.3652586-1-ackerleytng@google.comSigned-off-by:
Ackerley Tng <ackerleytng@google.com> Reviewed-by:
-
Nhat Pham authored
Test cachestat on a newly created file, /dev/ files, /proc/ files and a directory. Also test on a shmem file (which can also be tested with huge pages since tmpfs supports huge pages). [colin.i.king@gmail.com: fix spelling mistake "trucate" -> "truncate"] Link: https://lkml.kernel.org/r/20230505110855.2493457-1-colin.i.king@gmail.com [mpe@ellerman.id.au: avoid excessive stack allocation] Link: https://lkml.kernel.org/r/877ctfa6yv.fsf@mail.lhotse Link: https://lkml.kernel.org/r/20230503013608.2431726-4-nphamcs@gmail.comSigned-off-by:
Nhat Pham <nphamcs@gmail.com> Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Cc: Brian Foster <bfoster@redhat.com> Cc: Matthew Wilcox (Oracle) <willy@infradead.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Cc: Colin Ian King <colin.i.king@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Nhat Pham authored
cachestat is previously only wired in for x86 (and architectures using the generic unistd.h table): https://lore.kernel.org/lkml/20230503013608.2431726-1-nphamcs@gmail.com/ This patch wires cachestat in for all the other architectures. [nphamcs@gmail.com: wire up cachestat for arm64] Link: https://lkml.kernel.org/r/20230511092843.3896327-1-nphamcs@gmail.com Link: https://lkml.kernel.org/r/20230510195806.2902878-1-nphamcs@gmail.comSigned-off-by:
-
Nhat Pham authored
There is currently no good way to query the page cache state of large file sets and directory trees. There is mincore(), but it scales poorly: the kernel writes out a lot of bitmap data that userspace has to aggregate, when the user really doesn not care about per-page information in that case. The user also needs to mmap and unmap each file as it goes along, which can be quite slow as well. Some use cases where this information could come in handy: * Allowing database to decide whether to perform an index scan or direct table queries based on the in-memory cache state of the index. * Visibility into the writeback algorithm, for performance issues diagnostic. * Workload-aware writeback pacing: estimating IO fulfilled by page cache (and IO to be done) within a range of a file, allowing for more frequent syncing when and where there is IO capacity, and batching when there is not. * Computing memory usage of large files/directory trees, analogous to the du tool for disk usage. More information about these use cases could be found in the following thread: https://lore.kernel.org/lkml/20230315170934.GA97793@cmpxchg.org/ This patch implements a new syscall that queries cache state of a file and summarizes the number of cached pages, number of dirty pages, number of pages marked for writeback, number of (recently) evicted pages, etc. in a given range. Currently, the syscall is only wired in for x86 architecture. NAME cachestat - query the page cache statistics of a file. SYNOPSIS #include <sys/mman.h> struct cachestat_range { __u64 off; __u64 len; }; struct cachestat { __u64 nr_cache; __u64 nr_dirty; __u64 nr_writeback; __u64 nr_evicted; __u64 nr_recently_evicted; }; int cachestat(unsigned int fd, struct cachestat_range *cstat_range, struct cachestat *cstat, unsigned int flags); DESCRIPTION cachestat() queries the number of cached pages, number of dirty pages, number of pages marked for writeback, number of evicted pages, number of recently evicted pages, in the bytes range given by `off` and `len`. An evicted page is a page that is previously in the page cache but has been evicted since. A page is recently evicted if its last eviction was recent enough that its reentry to the cache would indicate that it is actively being used by the system, and that there is memory pressure on the system. These values are returned in a cachestat struct, whose address is given by the `cstat` argument. The `off` and `len` arguments must be non-negative integers. If `len` > 0, the queried range is [`off`, `off` + `len`]. If `len` == 0, we will query in the range from `off` to the end of the file. The `flags` argument is unused for now, but is included for future extensibility. User should pass 0 (i.e no flag specified). Currently, hugetlbfs is not supported. Because the status of a page can change after cachestat() checks it but before it returns to the application, the returned values may contain stale information. RETURN VALUE On success, cachestat returns 0. On error, -1 is returned, and errno is set to indicate the error. ERRORS EFAULT cstat or cstat_args points to an invalid address. EINVAL invalid flags. EBADF invalid file descriptor. EOPNOTSUPP file descriptor is of a hugetlbfs file [nphamcs@gmail.com: replace rounddown logic with the existing helper] Link: https://lkml.kernel.org/r/20230504022044.3675469-1-nphamcs@gmail.com Link: https://lkml.kernel.org/r/20230503013608.2431726-3-nphamcs@gmail.comSigned-off-by: -
Nhat Pham authored
Patch series "cachestat: a new syscall for page cache state of files", v13. There is currently no good way to query the page cache statistics of large files and directory trees. There is mincore(), but it scales poorly: the kernel writes out a lot of bitmap data that userspace has to aggregate, when the user really does not care about per-page information in that case. The user also needs to mmap and unmap each file as it goes along, which can be quite slow as well. Some use cases where this information could come in handy: * Allowing database to decide whether to perform an index scan or direct table queries based on the in-memory cache state of the index. * Visibility into the writeback algorithm, for performance issues diagnostic. * Workload-aware writeback pacing: estimating IO fulfilled by page cache (and IO to be done) within a range of a file, allowing for more frequent syncing when and where there is IO capacity, and batching when there is not. * Computing memory usage of large files/directory trees, analogous to the du tool for disk usage. More information about these use cases could be found in this thread: https://lore.kernel.org/lkml/20230315170934.GA97793@cmpxchg.org/ This series of patches introduces a new system call, cachestat, that summarizes the page cache statistics (number of cached pages, dirty pages, pages marked for writeback, evicted pages etc.) of a file, in a specified range of bytes. It also include a selftest suite that tests some typical usage. Currently, the syscall is only wired in for x86 architecture. This interface is inspired by past discussion and concerns with fincore, which has a similar design (and as a result, issues) as mincore. Relevant links: https://lkml.indiana.edu/hypermail/linux/kernel/1302.1/04207.html https://lkml.indiana.edu/hypermail/linux/kernel/1302.1/04209.html I have also developed a small tool that computes the memory usage of files and directories, analogous to the du utility. User can choose between mincore or cachestat (with cachestat exporting more information than mincore). To compare the performance of these two options, I benchmarked the tool on the root directory of a Meta's server machine, each for five runs: Using cachestat real -- Median: 33.377s, Average: 33.475s, Standard Deviation: 0.3602 user -- Median: 4.08s, Average: 4.1078s, Standard Deviation: 0.0742 sys -- Median: 28.823s, Average: 28.8866s, Standard Deviation: 0.2689 Using mincore: real -- Median: 102.352s, Average: 102.3442s, Standard Deviation: 0.2059 user -- Median: 10.149s, Average: 10.1482s, Standard Deviation: 0.0162 sys -- Median: 91.186s, Average: 91.2084s, Standard Deviation: 0.2046 I also ran both syscalls on a 2TB sparse file: Using cachestat: real 0m0.009s user 0m0.000s sys 0m0.009s Using mincore: real 0m37.510s user 0m2.934s sys 0m34.558s Very large files like this are the pathological case for mincore. In fact, to compute the stats for a single 2TB file, mincore takes as long as cachestat takes to compute the stats for the entire tree! This could easily happen inadvertently when we run it on subdirectories. Mincore is clearly not suitable for a general-purpose command line tool. Regarding security concerns, cachestat() should not pose any additional issues. The caller already has read permission to the file itself (since they need an fd to that file to call cachestat). This means that the caller can access the underlying data in its entirety, which is a much greater source of information (and as a result, a much greater security risk) than the cache status itself. The latest API change (in v13 of the patch series) is suggested by Jens Axboe. It allows for 64-bit length argument, even on 32-bit architecture (which is previously not possible due to the limit on the number of syscall arguments). Furthermore, it eliminates the need for compatibility handling - every user can use the same ABI. This patch (of 4): In preparation for computing recently evicted pages in cachestat, refactor workingset_refault and lru_gen_refault to expose a helper function that would test if an evicted page is recently evicted. [penguin-kernel@I-love.SAKURA.ne.jp: add missing rcu_read_unlock() in lru_gen_refault()] Link: https://lkml.kernel.org/r/610781bc-cf11-fc89-a46f-87cb8235d439@I-love.SAKURA.ne.jp Link: https://lkml.kernel.org/r/20230503013608.2431726-1-nphamcs@gmail.com Link: https://lkml.kernel.org/r/20230503013608.2431726-2-nphamcs@gmail.comSigned-off-by:Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by:
-
Haifeng Xu authored
Before commit 29ef680a ("memcg, oom: move out_of_memory back to the charge path"), all memcg oom killers were delayed to page fault path. And the explicit wakeup is used in this case: thread A: ... if (locked) { // complete oom-kill, hold the lock mem_cgroup_oom_unlock(memcg); ... } ... thread B: ... if (locked && !memcg->oom_kill_disable) { ... } else { schedule(); // can't acquire the lock ... } ... The reason is that thread A kicks off the OOM-killer, which leads to wakeups from the uncharges of the exiting task. But thread B is not guaranteed to see them if it enters the OOM path after the OOM kills but before thread A releases the lock. Now only oom_kill_disable case is handled from the #PF path. In that case it is userspace to trigger the wake up not the #PF path itself. All potential paths to free some charges are responsible to call memcg_oom_recover() , so the explicit wakeup is not needed in the mem_cgroup_oom_synchronize() path which doesn't release any memory itself. Link: https://lkml.kernel.org/r/20230419030739.115845-2-haifeng.xu@shopee.comSigned-off-by:
-
Haifeng Xu authored
mem_cgroup_oom_synchronize() is only used when the memcg oom handling is handed over to the edge of the #PF path. Since commit 29ef680a ("memcg, oom: move out_of_memory back to the charge path") this is the case only when the kernel memcg oom killer is disabled (current->memcg_in_oom is only set if memcg->oom_kill_disable). Therefore a check for oom_kill_disable in mem_cgroup_oom_synchronize() is not required. Link: https://lkml.kernel.org/r/20230419030739.115845-1-haifeng.xu@shopee.comSigned-off-by:
-
Yosry Ahmed authored
Previous patches removed the only caller of cgroup_rstat_flush_atomic(). Remove the function and simplify the code. Link: https://lkml.kernel.org/r/20230421174020.2994750-6-yosryahmed@google.comSigned-off-by:
Yosry Ahmed <yosryahmed@google.com> Acked-by:
Shakeel Butt <shakeelb@google.com> Acked-by:
Tejun Heo <tj@kernel.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Christian Brauner <brauner@kernel.org> Cc: Jan Kara <jack@suse.cz> Cc: Jens Axboe <axboe@kernel.dk> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Michal Koutný <mkoutny@suse.com> Cc: Muchun Song <songmuchun@bytedance.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Signed-off-by:
-
Yosry Ahmed authored
Previous patches removed all callers of mem_cgroup_flush_stats_atomic(). Remove the function and simplify the code. Link: https://lkml.kernel.org/r/20230421174020.2994750-5-yosryahmed@google.comSigned-off-by:
-
Yosry Ahmed authored
Currently, we approximate the root usage by adding the memcg stats for anon, file, and conditionally swap (for memsw). To read the memcg stats we need to invoke an rstat flush. rstat flushes can be expensive, they scale with the number of cpus and cgroups on the system. mem_cgroup_usage() is called by memcg_events()->mem_cgroup_threshold() with irqs disabled, so such an expensive operation with irqs disabled can cause problems. Instead, approximate the root usage from global state. This is not 100% accurate, but the root usage has always been ill-defined anyway. Link: https://lkml.kernel.org/r/20230421174020.2994750-4-yosryahmed@google.comSigned-off-by:
Michal Koutný <mkoutny@suse.com> Acked-by:
-
Yosry Ahmed authored
The previous patch moved the wb_over_bg_thresh()->mem_cgroup_wb_stats() code path in wb_writeback() outside the lock section. We no longer need to flush the stats atomically. Flush the stats non-atomically. Link: https://lkml.kernel.org/r/20230421174020.2994750-3-yosryahmed@google.comSigned-off-by:
-
Yosry Ahmed authored
Patch series "cgroup: eliminate atomic rstat flushing", v5. A previous patch series [1] changed most atomic rstat flushing contexts to become non-atomic. This was done to avoid an expensive operation that scales with # cgroups and # cpus to happen with irqs disabled and scheduling not permitted. There were two remaining atomic flushing contexts after that series. This series tries to eliminate them as well, eliminating atomic rstat flushing completely. The two remaining atomic flushing contexts are: (a) wb_over_bg_thresh()->mem_cgroup_wb_stats() (b) mem_cgroup_threshold()->mem_cgroup_usage() For (a), flushing needs to be atomic as wb_writeback() calls wb_over_bg_thresh() with a spinlock held. However, it seems like the call to wb_over_bg_thresh() doesn't need to be protected by that spinlock, so this series proposes a refactoring that moves the call outside the lock criticial section and makes the stats flushing in mem_cgroup_wb_stats() non-atomic. For (b), flushing needs to be atomic as mem_cgroup_threshold() is called with irqs disabled. We only flush the stats when calculating the root usage, as it is approximated as the sum of some memcg stats (file, anon, and optionally swap) instead of the conventional page counter. This series proposes changing this calculation to use the global stats instead, eliminating the need for a memcg stat flush. After these 2 contexts are eliminated, we no longer need mem_cgroup_flush_stats_atomic() or cgroup_rstat_flush_atomic(). We can remove them and simplify the code. [1] https://lore.kernel.org/linux-mm/20230330191801.1967435-1-yosryahmed@google.com/ This patch (of 5): wb_over_bg_thresh() calls mem_cgroup_wb_stats() which invokes an rstat flush, which can be expensive on large systems. Currently, wb_writeback() calls wb_over_bg_thresh() within a lock section, so we have to do the rstat flush atomically. On systems with a lot of cpus and/or cgroups, this can cause us to disable irqs for a long time, potentially causing problems. Move the call to wb_over_bg_thresh() outside the lock section in preparation to make the rstat flush in mem_cgroup_wb_stats() non-atomic. The list_empty(&wb->work_list) check should be okay outside the lock section of wb->list_lock as it is protected by a separate lock (wb->work_lock), and wb_over_bg_thresh() doesn't seem like it is modifying any of wb->b_* lists the wb->list_lock is protecting. Also, the loop seems to be already releasing and reacquring the lock, so this refactoring looks safe. Link: https://lkml.kernel.org/r/20230421174020.2994750-1-yosryahmed@google.com Link: https://lkml.kernel.org/r/20230421174020.2994750-2-yosryahmed@google.comSigned-off-by:
Jan Kara <jack@suse.cz> Acked-by:
-
Baolin Wang authored
__pageblock_pfn_to_page() currently performs both pfn_valid check and pfn_to_online_page(). The former one is redundant because the latter is a stronger check. Drop pfn_valid(). Link: https://lkml.kernel.org/r/c3868b58c6714c09a43440d7d02c7b4eed6e03f6.1682342634.git.baolin.wang@linux.alibaba.comSigned-off-by:
Baolin Wang <baolin.wang@linux.alibaba.com> Reviewed-by:
-
Wen Yang authored
For the /proc/sys/vm/compact_memory file, the admin-guide states: When 1 is written to the file, all zones are compacted such that free memory is available in contiguous blocks where possible. This can be important for example in the allocation of huge pages although processes will also directly compact memory as required But it was not strictly followed, writing any value would cause all zones to be compacted. It has been slightly optimized to comply with the admin-guide. Enforce the 1 on the unlikely chance that the sysctl handler is ever extended to do something different. Commit ef498438 ("mm/compaction: remove unused variable sysctl_compact_memory") has also been optimized a bit here, as the declaration in the external header file has been eliminated, and sysctl_compact_memory also needs to be verified. [akpm@linux-foundation.org: add __read_mostly, per Mel] Link: https://lkml.kernel.org/r/tencent_DFF54DB2A60F3333F97D3F6B5441519B050A@qq.comSigned-off-by:
Wen Yang <wenyang.linux@foxmail.com> Acked-by:
Mel Gorman <mgorman@techsingularity.net> Cc: Oscar Salvador <osalvador@suse.de> Cc: William Lam <william.lam@bytedance.com> Cc: Pintu Kumar <pintu@codeaurora.org> Cc: Fu Wei <wefu@redhat.com> Signed-off-by:
-
Yosry Ahmed authored
Patch series "memcg: OOM log improvements", v2. This short patch series brings back some cgroup v1 stats in OOM logs that were unnecessarily changed before. It also makes memcg OOM logs less reliant on printk() internals. This patch (of 2): Commit c8713d0b ("mm: memcontrol: dump memory.stat during cgroup OOM") made sure we dump all the stats in memory.stat during a cgroup OOM, but it also introduced a slight behavioral change. The code used to print the non-hierarchical v1 cgroup stats for the entire cgroup subtree, now it only prints the v2 cgroup stats for the cgroup under OOM. For cgroup v1 users, this introduces a few problems: (a) The non-hierarchical stats of the memcg under OOM are no longer shown. (b) A couple of v1-only stats (e.g. pgpgin, pgpgout) are no longer shown. (c) We show the list of cgroup v2 stats, even in cgroup v1. This list of stats is not tracked with v1 in mind. While most of the stats seem to be working on v1, there may be some stats that are not fully or correctly tracked. Although OOM log is not set in stone, we should not change it for no reason. When upgrading the kernel version to a version including commit c8713d0b ("mm: memcontrol: dump memory.stat during cgroup OOM"), these behavioral changes are noticed in cgroup v1. The fix is simple. Commit c8713d0b ("mm: memcontrol: dump memory.stat during cgroup OOM") separated stats formatting from stats display for v2, to reuse the stats formatting in the OOM logs. Do the same for v1. Move the v2 specific formatting from memory_stat_format() to memcg_stat_format(), add memcg1_stat_format() for v1, and make memory_stat_format() select between them based on cgroup version. Since memory_stat_show() now works for both v1 & v2, drop memcg_stat_show(). Link: https://lkml.kernel.org/r/20230428132406.2540811-1-yosryahmed@google.com Link: https://lkml.kernel.org/r/20230428132406.2540811-3-yosryahmed@google.comSigned-off-by:
Michal Hocko <mhocko@kernel.org> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Muchun Song <muchun.song@linux.dev> Cc: Petr Mladek <pmladek@suse.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Sergey Senozhatsky <senozhatsky@chromium.org> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by:
-
Yosry Ahmed authored
Currently, we format all the memcg stats into a buffer in mem_cgroup_print_oom_meminfo() and use pr_info() to dump it to the logs. However, this buffer is large in size. Although it is currently working as intended, ther is a dependency between the memcg stats buffer and the printk record size limit. If we add more stats in the future and the buffer becomes larger than the printk record size limit, or if the prink record size limit is reduced, the logs may be truncated. It is safer to use seq_buf_do_printk(), which will automatically break up the buffer at line breaks and issue small printk() calls. Refactor the code to move the seq_buf from memory_stat_format() to its callers, and use seq_buf_do_printk() to print the seq_buf in mem_cgroup_print_oom_meminfo(). Link: https://lkml.kernel.org/r/20230428132406.2540811-2-yosryahmed@google.comSigned-off-by:
Sergey Senozhatsky <senozhatsky@chromium.org> Acked-by:
Muchun Song <songmuchun@bytedance.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Roman Gushchin <roman.gushchin@linux.dev> Cc: Steven Rostedt (Google) <rostedt@goodmis.org> Signed-off-by:
-
Douglas Anderson authored
The MIGRATE_SYNC_LIGHT mode is intended to block for things that will finish quickly but not for things that will take a long time. Exactly how long is too long is not well defined, but waits of tens of milliseconds is likely non-ideal. When putting a Chromebook under memory pressure (opening over 90 tabs on a 4GB machine) it was fairly easy to see delays waiting for some locks in the kcompactd code path of > 100 ms. While the laptop wasn't amazingly usable in this state, it was still limping along and this state isn't something artificial. Sometimes we simply end up with a lot of memory pressure. Putting the same Chromebook under memory pressure while it was running Android apps (though not stressing them) showed a much worse result (NOTE: this was on a older kernel but the codepaths here are similar). Android apps on ChromeOS currently run from a 128K-block, zlib-compressed, loopback-mounted squashfs disk. If we get a page fault from something backed by the squashfs filesystem we could end up holding a folio lock while reading enough from disk to decompress 128K (and then decompressing it using the somewhat slow zlib algorithms). That reading goes through the ext4 subsystem (because it's a loopback mount) before eventually ending up in the block subsystem. This extra jaunt adds extra overhead. Without much work I could see cases where we ended up blocked on a folio lock for over a second. With more extreme memory pressure I could see up to 25 seconds. We considered adding a timeout in the case of MIGRATE_SYNC_LIGHT for the two locks that were seen to be slow [1] and that generated much discussion. After discussion, it was decided that we should avoid waiting for the two locks during MIGRATE_SYNC_LIGHT if they were being held for IO. We'll continue with the unbounded wait for the more full SYNC modes. With this change, I couldn't see any slow waits on these locks with my previous testcases. NOTE: The reason I stated digging into this originally isn't because some benchmark had gone awry, but because we've received in-the-field crash reports where we have a hung task waiting on the page lock (which is the equivalent code path on old kernels). While the root cause of those crashes is likely unrelated and won't be fixed by this patch, analyzing those crash reports did point out these very long waits seemed like something good to fix. With this patch we should no longer hang waiting on these locks, but presumably the system will still be in a bad shape and hang somewhere else. [1] https://lore.kernel.org/r/20230421151135.v2.1.I2b71e11264c5c214bc59744b9e13e4c353bc5714@changeid Link: https://lkml.kernel.org/r/20230428135414.v3.1.Ia86ccac02a303154a0b8bc60567e7a95d34c96d3@changeidSigned-off-by:
Douglas Anderson <dianders@chromium.org> Suggested-by:
-
Roman Gushchin authored
A memcg pointer in the percpu stock can be accessed by drain_all_stock() from another cpu in a lockless way. In theory it might lead to an issue, similar to the one which has been discovered with stock->cached_objcg, where the pointer was zeroed between the check for being NULL and dereferencing. In this case the issue is unlikely a real problem, but to make it bulletproof and similar to stock->cached_objcg, let's annotate all accesses to stock->cached with READ_ONCE()/WTRITE_ONCE(). Link: https://lkml.kernel.org/r/20230502160839.361544-2-roman.gushchin@linux.devSigned-off-by:
Roman Gushchin <roman.gushchin@linux.dev> Acked-by:
-
Roman Gushchin authored
KCSAN found an issue in obj_stock_flush_required(): stock->cached_objcg can be reset between the check and dereference: ================================================================== BUG: KCSAN: data-race in drain_all_stock / drain_obj_stock write to 0xffff888237c2a2f8 of 8 bytes by task 19625 on cpu 0: drain_obj_stock+0x408/0x4e0 mm/memcontrol.c:3306 refill_obj_stock+0x9c/0x1e0 mm/memcontrol.c:3340 obj_cgroup_uncharge+0xe/0x10 mm/memcontrol.c:3408 memcg_slab_free_hook mm/slab.h:587 [inline] __cache_free mm/slab.c:3373 [inline] __do_kmem_cache_free mm/slab.c:3577 [inline] kmem_cache_free+0x105/0x280 mm/slab.c:3602 __d_free fs/dcache.c:298 [inline] dentry_free fs/dcache.c:375 [inline] __dentry_kill+0x422/0x4a0 fs/dcache.c:621 dentry_kill+0x8d/0x1e0 dput+0x118/0x1f0 fs/dcache.c:913 __fput+0x3bf/0x570 fs/file_table.c:329 ____fput+0x15/0x20 fs/file_table.c:349 task_work_run+0x123/0x160 kernel/task_work.c:179 resume_user_mode_work include/linux/resume_user_mode.h:49 [inline] exit_to_user_mode_loop+0xcf/0xe0 kernel/entry/common.c:171 exit_to_user_mode_prepare+0x6a/0xa0 kernel/entry/common.c:203 __syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline] syscall_exit_to_user_mode+0x26/0x140 kernel/entry/common.c:296 do_syscall_64+0x4d/0xc0 arch/x86/entry/common.c:86 entry_SYSCALL_64_after_hwframe+0x63/0xcd read to 0xffff888237c2a2f8 of 8 bytes by task 19632 on cpu 1: obj_stock_flush_required mm/memcontrol.c:3319 [inline] drain_all_stock+0x174/0x2a0 mm/memcontrol.c:2361 try_charge_memcg+0x6d0/0xd10 mm/memcontrol.c:2703 try_charge mm/memcontrol.c:2837 [inline] mem_cgroup_charge_skmem+0x51/0x140 mm/memcontrol.c:7290 sock_reserve_memory+0xb1/0x390 net/core/sock.c:1025 sk_setsockopt+0x800/0x1e70 net/core/sock.c:1525 udp_lib_setsockopt+0x99/0x6c0 net/ipv4/udp.c:2692 udp_setsockopt+0x73/0xa0 net/ipv4/udp.c:2817 sock_common_setsockopt+0x61/0x70 net/core/sock.c:3668 __sys_setsockopt+0x1c3/0x230 net/socket.c:2271 __do_sys_setsockopt net/socket.c:2282 [inline] __se_sys_setsockopt net/socket.c:2279 [inline] __x64_sys_setsockopt+0x66/0x80 net/socket.c:2279 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x41/0xc0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd value changed: 0xffff8881382d52c0 -> 0xffff888138893740 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 19632 Comm: syz-executor.0 Not tainted 6.3.0-rc2-syzkaller-00387-g53429336 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/02/2023 Fix it by using READ_ONCE()/WRITE_ONCE() for all accesses to stock->cached_objcg. Link: https://lkml.kernel.org/r/20230502160839.361544-1-roman.gushchin@linux.dev Fixes: bf4f0599 ("mm: memcg/slab: obj_cgroup API") Signed-off-by:
Dmitry Vyukov <dvyukov@google.com> Link: https://lore.kernel.org/linux-mm/CACT4Y+ZfucZhM60YPphWiCLJr6+SGFhT+jjm8k1P-a_8Kkxsjg@mail.gmail.com/T/#tReviewed-by:
-
- 28 May, 2023 8 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 cpu fix from Thomas Gleixner: "A single fix for x86: - Prevent a bogus setting for the number of HT siblings, which is caused by the CPUID evaluation trainwreck of X86. That recomputes the value for each CPU, so the last CPU "wins". That can cause completely bogus sibling values" * tag 'x86-urgent-2023-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/topology: Fix erroneous smp_num_siblings on Intel Hybrid platforms -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Thomas Gleixner: "A small set of perf fixes: - Make the MSR-readout based CHA discovery work around broken discovery tables in some SPR firmwares. - Prevent saving PEBS configuration which has software bits set that cause a crash when restored into the relevant MSR" * tag 'perf-urgent-2023-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/uncore: Correct the number of CHAs on SPR perf/x86/intel: Save/restore cpuc->active_pebs_data_cfg when using guest PEBS -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull unwinder fixes from Thomas Gleixner: "A set of unwinder and tooling fixes: - Ensure that the stack pointer on x86 is aligned again so that the unwinder does not read past the end of the stack - Discard .note.gnu.property section which has a pointlessly different alignment than the other note sections. That confuses tooling of all sorts including readelf, libbpf and pahole" * tag 'objtool-urgent-2023-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/show_trace_log_lvl: Ensure stack pointer is aligned, again vmlinux.lds.h: Discard .note.gnu.property section -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull debugobjects fixes from Thomas Gleixner: "Two fixes for debugobjects: - Prevent the allocation path from waking up kswapd. That's a long standing issue due to the GFP_ATOMIC allocation flag. As debug objects can be invoked from pretty much any context waking kswapd can end up in arbitrary lock chains versus the waitqueue lock - Correct the explicit lockdep wait-type violation in debug_object_fill_pool()" * tag 'core-debugobjects-2023-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: debugobjects: Don't wake up kswapd from fill_pool() debugobjects,locking: Annotate debug_object_fill_pool() wait type violation -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Thomas Gleixner: "A set of fixes for interrupt chip drivers: - Prevent loss of state in the MIPS GIC interrupt controller - Disable pseudo NMIs on Mediatek based Chromebooks as they have firmware issues which cause instantenous chrashes and freezes wen pseudo NMIs are used - Fix the error handling path in the MBIGEN driver and a defined but not used warning in the meson-gpio interrupt chip driver" * tag 'irq-urgent-2023-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/mbigen: Unify the error handling in mbigen_of_create_domain() irqchip/meson-gpio: Mark OF related data as maybe unused irqchip/mips-gic: Use raw spinlock for gic_lock irqchip/mips-gic: Don't touch vl_map if a local interrupt is not routable irqchip/gic-v3: Disable pseudo NMIs on Mediatek devices w/ firmware issues dt-bindings: interrupt-controller: arm,gic-v3: Add quirk for Mediatek SoCs w/ broken FW -
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS fixes from Thomas Bogendoerfer: - fixes to get alchemy platform back in shape - fix for initrd detection * tag 'mips-fixes_6.4_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: mips: Move initrd_start check after initrd address sanitisation. MIPS: Alchemy: fix dbdma2 MIPS: Restore Au1300 support MIPS: unhide PATA_PLATFORM
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fix from Michael Ellerman: - Reinstate ARCH_FORCE_MAX_ORDER ranges to fix various breakage * tag 'powerpc-6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/mm: Reinstate ARCH_FORCE_MAX_ORDER ranges
-
- 27 May, 2023 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fixes from Juergen Gross: - a double free fix in the Xen pvcalls backend driver - a fix for a regression causing the MSI related sysfs entries to not being created in Xen PV guests - a fix in the Xen blkfront driver for handling insane input data better * tag 'for-linus-6.4-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: x86/pci/xen: populate MSI sysfs entries xen/pvcalls-back: fix double frees with pvcalls_new_active_socket() xen/blkfront: Only check REQ_FUA for writes
-
