- 09 Apr, 2020 2 commits
-
-
Amadeusz Sławiński authored
Function soc_tplg_create_tlv can fail, so we should check if it succeded or not and proceed appropriately. Signed-off-by:
Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200327204729.397-3-amadeuszx.slawinski@linux.intel.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
Amadeusz Sławiński authored
kstrdup is an allocation function and it can fail, so its return value should be checked and handled appropriately. In order to check all cases, we need to modify set_stream_info to return a value, so check that everything went correctly when doing kstrdup(). Later add proper checks and error handlers. Signed-off-by:
-
- 07 Apr, 2020 1 commit
-
-
Mike Willard authored
Pull the RST line low then high when initializing the driver, in order to force a reset of the chip. Previously, the line was not pulled low, which could result in the chip registers not resetting to their default values on boot. Signed-off-by:
Mike Willard <mwillard@izotope.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20200401205454.79792-1-mwillard@izotope.comSigned-off-by:
-
- 06 Apr, 2020 3 commits
-
-
Hans de Goede authored
The Medion E1239T uses the default jack-detect mode 3, but instead of using an analog microphone it is using a DMIC on dmic-data-pin 1, like other models following Intel's Brasswell's reference design. This commit adds a DMI quirk pointing to the intel_braswell_platform_data for this model. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Reviewed-by:
-
Hans de Goede authored
The MPMAN MPWIN895CL tablet almost fully works with out default settings. The only problem is that it has only 1 speaker so any sounds only playing on the right channel get lost. Add a quirk for this model using the default settings + MONO_SPEAKER. Signed-off-by:
-
Julia Lawall authored
The commit 0d6defc7 ("ASoC: stm32: sai: manage rebind issue") converts some function calls to their non-devm equivalents. The appropriate cleanup code was added to the remove function, but not to the probe function. Add a call to snd_dmaengine_pcm_unregister to compensate for the call to snd_dmaengine_pcm_register in case of subsequent failure. Fixes: commit 0d6defc7 ("ASoC: stm32: sai: manage rebind issue") Signed-off-by:
Julia Lawall <Julia.Lawall@inria.fr> Acked-by:
Olivier Moysan <olivier.moysan@st.com> Link: https://lore.kernel.org/r/1586099028-5104-1-git-send-email-Julia.Lawall@inria.frSigned-off-by:
-
- 03 Apr, 2020 4 commits
-
-
Hans de Goede authored
GCC 10 gives a "variable might be used uninitialized" warning for the block variable in sst_prepare_and_post_msg(). This is a false-positive warning, but lets fix it anyways. Signed-off-by:
-
Hans de Goede authored
sst_fill_and_send_cmd_unlocked must be called with the drv->lock mutex locked already. In the past there have been cases where this was not the case, add a WARN_ON to check for drv->lock being locked. Signed-off-by:
-
Hans de Goede authored
sst_send_slot_map() uses sst_fill_and_send_cmd_unlocked() because in some places it is called with the drv->lock mutex already held. So it must always be called with the mutex locked. This commit adds missing locking in the sst_set_be_modules() code-path. Fixes: 24c8d141 ("ASoC: Intel: mrfld: add DSP core controls") Signed-off-by:
-
Hans de Goede authored
Using a Canon Lake machine with the SOF driver causes dmesg to fill up with a ton of these messages: [ 275.902194] sof-audio-pci 0000:00:1f.3: firmware boot complete [ 351.529358] sof-audio-pci 0000:00:1f.3: firmware boot complete [ 560.049047] sof-audio-pci 0000:00:1f.3: firmware boot complete etc. Since the DSP is powered down when not in used this happens everytime e.g. a notification plays, polluting dmesg. Turn this messages into a debug message, matching what the code already does for the ""booting DSP firmware" message. Signed-off-by:
-
- 01 Apr, 2020 3 commits
-
-
이경택 authored
Current topology doesn't add prefix of component to new kcontrol. Signed-off-by:
Gyeongtaek Lee <gt82.lee@samsung.com> Link: https://lore.kernel.org/r/009b01d60804$ae25c2d0$0a714870$@samsung.comSigned-off-by:
-
YueHaibing authored
If I2C is n but SoundWire is m, building fails: sound/soc/codecs/rt5682.c:3716:1: warning: data definition has no type or storage class module_i2c_driver(rt5682_i2c_driver); ^~~~~~~~~~~~~~~~~ sound/soc/codecs/rt5682.c:3716:1: error: type defaults to 'int' in declaration of 'module_i2c_driver' [-Werror=implicit-int] sound/soc/codecs/rt5682.c:3716:1: warning: parameter names (without types) in function declaration Guard this use #ifdef CONFIG_I2C. Fixes: 5549ea64 ("ASoC: rt5682: fix unmet dependencies") Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Link: https://lore.kernel.org/r/20200401091055.34112-1-yuehaibing@huawei.comSigned-off-by:
-
이경택 authored
soc_compr_trigger_fe() allows start or stop after pause_push. In dpcm_be_dai_trigger(), however, only pause_release is allowed command after pause_push. So, start or stop after pause in compress offload is always returned as error if the compress offload is used with dpcm. To fix the problem, SND_SOC_DPCM_STATE_PAUSED should be allowed for start or stop command. Signed-off-by:
Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/004d01d607c1$7a3d5250$6eb7f6f0$@samsung.comSigned-off-by:
-
- 31 Mar, 2020 2 commits
-
-
이경택 authored
Since a virtual mixer has no backing registers to decide which path to connect, it will try to match with initial state. This is to ensure that the default mixer choice will be correctly powered up during initialization. Invert flag is used to select initial state of the virtual switch. Since actual hardware can't be disconnected by virtual switch, connected is better choice as initial state in many cases. Signed-off-by:
-
Stephan Gerhold authored
At the moment, playing audio with PulseAudio with the qdsp6 driver results in distorted sound. It seems like its timer-based scheduling does not work properly with qdsp6 since setting tsched=0 in the PulseAudio configuration avoids the issue. Apparently this happens when the pointer() callback is not accurate enough. There is a SNDRV_PCM_INFO_BATCH flag that can be used to stop PulseAudio from using timer-based scheduling by default. According to https://www.alsa-project.org/pipermail/alsa-devel/2014-March/073816.html: The flag is being used in the sense explained in the previous audio meeting -- the data transfer granularity isn't fine enough but aligned to the period size (or less). q6asm-dai reports the position as multiple of prtd->pcm_count = snd_pcm_lib_period_bytes(substream) so it indeed just a multiple of the period size. Therefore adding the flag here seems appropriate and makes audio work out of the box. Fixes: 2a9e92d3 ("ASoC: qdsp6: q6asm: Add q6asm dai driver") Signed-off-by:
Stephan Gerhold <stephan@gerhold.net> Reviewed-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200330175210.47518-1-stephan@gerhold.netSigned-off-by:
-
- 30 Mar, 2020 10 commits
-
-
Mark Brown authored
Merge series "ASoC: Intel: boards: Remove ignore_suspend flag from SSP0 dai link" from Cezary Rojewski <cezary.rojewski@intel.com>: As of commit: ASoC: soc-core: care .ignore_suspend for Component suspend function soc-core::snd_soc_suspend no longer ignores 'ignore_suspend' flag for dai links. While BE dai link for System Pin is supposed to follow standard suspend-resume flow, appended 'ignore_suspend' flag disturbs that flow and causes audio to break right after resume. Remove the flag to address this. Link to first message in conversation: https://lkml.org/lkml/2020/3/18/54 Cezary Rojewski (4): ASoC: Intel: broadwell: Remove ignore_suspend flag from SSP0 dai link ASoC: Intel: haswell: Remove ignore_suspend flag from SSP0 dai link ASoC: Intel: bdw-rt5677: Remove ignore_suspend flag from SSP0 dai link ASoC: Intel: bdw-rt5650: Remove ignore_suspend flag from SSP0 dai link sound/soc/intel/boards/bdw-rt5650.c | 1 - sound/soc/intel/boards/bdw-rt5677.c | 1 - sound/soc/intel/boards/broadwell.c | 1 - sound/soc/intel/boards/haswell.c | 1 - 4 files changed, 4 deletions(-) -- 2.17.1
-
Pierre-Louis Bossart authored
The addition of a single flag to track the DAI status prevents the DAI startup sequence from being called on capture if the DAI is already used for playback. Fix by extending the existing code with one flag per direction. Fixes: b56be800 ("ASoC: soc-pcm: call snd_soc_dai_startup()/shutdown() once") Reported-by:
-
이경택 authored
If regwshift is 32 and the selected architecture compiles '<<' operator for signed int literal into rotating shift, '1<<regwshift' became 1 and it makes regwmask to 0x0. The literal is set to unsigned long to get intended regwmask. Signed-off-by:
-
Cezary Rojewski authored
As of commit: ASoC: soc-core: care .ignore_suspend for Component suspend function soc-core::snd_soc_suspend no longer ignores 'ignore_suspend' flag for dai links. While BE dai link for System Pin is supposed to follow standard suspend-resume flow, appended 'ignore_suspend' flag disturbs that flow and causes audio to break right after resume. Remove the flag to address this. Signed-off-by:
Cezary Rojewski <cezary.rojewski@intel.com> Acked-by:
-
Cezary Rojewski authored
As of commit: ASoC: soc-core: care .ignore_suspend for Component suspend function soc-core::snd_soc_suspend no longer ignores 'ignore_suspend' flag for dai links. While BE dai link for System Pin is supposed to follow standard suspend-resume flow, appended 'ignore_suspend' flag disturbs that flow and causes audio to break right after resume. Remove the flag to address this. Signed-off-by:
-
Cezary Rojewski authored
As of commit: ASoC: soc-core: care .ignore_suspend for Component suspend function soc-core::snd_soc_suspend no longer ignores 'ignore_suspend' flag for dai links. While BE dai link for System Pin is supposed to follow standard suspend-resume flow, appended 'ignore_suspend' flag disturbs that flow and causes audio to break right after resume. Remove the flag to address this. Signed-off-by:
-
Cezary Rojewski authored
As of commit: ASoC: soc-core: care .ignore_suspend for Component suspend function soc-core::snd_soc_suspend no longer ignores 'ignore_suspend' flag for dai links. While BE dai link for System Pin is supposed to follow standard suspend-resume flow, appended 'ignore_suspend' flag disturbs that flow and causes audio to break right after resume. Remove the flag to address this. Link to first message in conversation: https://lkml.org/lkml/2020/3/18/54Reported-by:
Dominik Brodowski <linux@dominikbrodowski.net> Suggested-by:
-
Akshu Agrawal authored
This avoids residual bit form previous format when the format is changed. Hence, the resultant format is not an invalid one. Signed-off-by:
Akshu Agrawal <akshu.agrawal@amd.com> Signed-off-by:
Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com> Link: https://lore.kernel.org/r/20200328093921.32211-1-akshu.agrawal@amd.comSigned-off-by:
-
Takashi Iwai authored
The NULL check can be done gracefully without cast. It fixes a compile warning like: sound/soc/bcm/bcm63xx-pcm-whistler.c:184:6: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] Fixes: 88eb404c ("ASoC: brcm: Add DSL/PON SoC audio driver") Signed-off-by:
Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20200330135645.9707-1-tiwai@suse.deSigned-off-by:
-
Fabio Estevam authored
The following warning is seen with 'make dt_binding_check': Documentation/devicetree/bindings/sound/cirrus,cs42l51.example.dts:18.15-34.11: Warning (unit_address_vs_reg): /example-0/i2c@0: node has a unit name, but no reg or ranges property Fix it by removing the unneeded i2c unit name. Signed-off-by:
Fabio Estevam <festevam@gmail.com> Acked-by:
Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200327155721.7596-1-festevam@gmail.comSigned-off-by:
-
- 27 Mar, 2020 15 commits
-
-
Mark Brown authored
Merge series "ASoC: Intel: add SoundWire machine driver" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: To handle multiple hardware combinations, this patchset suggests a single machine driver which will create and initialize dailinks dynamically. This allows us to support new configurations easily, as shown with the TigerLake rt5682 example. Each configuration updates the card component string, and UCM can test for the presence of components to configure them as needed. Since we use a single the machine driver name, all previous ACPI tables need to be updated. That should have no impact since the machine drivers listed at the time were not upstreamed and are no longer maintained. Naveen Manohar (2): ASoC: Intel: common: add match table for TGL RT5682 SoundWire driver ASoC: Intel: sof_sdw: Add Volteer support with RT5682 SNDW helper function Pierre-Louis Bossart (1): ASoC: Intel: boards: add sof_sdw machine driver Rander Wang (1): ASoC: Intel: soc-acpi: update topology and driver name for SoundWire platforms sound/soc/intel/boards/Kconfig | 24 + sound/soc/intel/boards/Makefile | 8 +- sound/soc/intel/boards/sof_sdw.c | 962 ++++++++++++++++++ sound/soc/intel/boards/sof_sdw_common.h | 114 +++ sound/soc/intel/boards/sof_sdw_dmic.c | 42 + sound/soc/intel/boards/sof_sdw_hdmi.c | 97 ++ sound/soc/intel/boards/sof_sdw_rt1308.c | 151 +++ sound/soc/intel/boards/sof_sdw_rt5682.c | 126 +++ sound/soc/intel/boards/sof_sdw_rt700.c | 125 +++ sound/soc/intel/boards/sof_sdw_rt711.c | 156 +++ sound/soc/intel/boards/sof_sdw_rt715.c | 42 + .../intel/common/soc-acpi-intel-cml-match.c | 24 +- .../intel/common/soc-acpi-intel-icl-match.c | 6 +- .../intel/common/soc-acpi-intel-tgl-match.c | 30 +- 14 files changed, 1896 insertions(+), 11 deletions(-) create mode 100644 sound/soc/intel/boards/sof_sdw.c create mode 100644 sound/soc/intel/boards/sof_sdw_common.h create mode 100644 sound/soc/intel/boards/sof_sdw_dmic.c create mode 100644 sound/soc/intel/boards/sof_sdw_hdmi.c create mode 100644 sound/soc/intel/boards/sof_sdw_rt1308.c create mode 100644 sound/soc/intel/boards/sof_sdw_rt5682.c create mode 100644 sound/soc/intel/boards/sof_sdw_rt700.c create mode 100644 sound/soc/intel/boards/sof_sdw_rt711.c create mode 100644 sound/soc/intel/boards/sof_sdw_rt715.c -- 2.20.1 -
Colin Ian King authored
There are a couple of statements that are not indented correctly, add in the missing tab and break the lines to address a checkpatch warning. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20200327141429.269191-1-colin.king@canonical.comSigned-off-by:
-
Dan Murphy authored
Remove undocumented and unneeded ti,use-internal-reg from the example as it was an artifact from initial development. The code does not query for this property and as the document indicates if areg-supply is undefined then the internal regulator is used. Fixes: 302c0b7490cd ("dt-bindings: sound: Add TLV320ADCx140 dt bindings") Signed-off-by:Dan Murphy <dmurphy@ti.com> CC: Rob Herring <robh@kernel.org> Link: https://lore.kernel.org/r/20200327162432.17067-1-dmurphy@ti.comSigned-off-by:
-
Naveen Manohar authored
Add support for Google Volteer device. As per new unified soundwire machine driver, add rt5682-sdw helper function, which configures codec to Link0. Signed-off-by:
Naveen Manohar <naveen.m@intel.com> Link: https://lore.kernel.org/r/20200325220746.29601-5-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Naveen Manohar authored
RT5682 is in SoundWire mode on link0. Signed-off-by:
-
Pierre-Louis Bossart authored
This machine driver provides support for different configurations: RT700, RT711, RT1308 (1x and 2x, I2S or SoundWire mode), and RT715 CometLake, Icelake, TigerLake. PDM digital microphones HDMI To avoid introducing one driver per configuration, this common machine driver relies on platform-specific information, tables and quirks to dynamically create the relevant dailinks. Unlike a lot of machine drivers, we use different DAI links for SoundWire capture and playback since the Cadence PDIs can do capture OR playback, not both simultaneously. For each configuration, the card component string is updated so that UCM can select the relevant parts. Signed-off-by:
Rander Wang <rander.wang@linux.intel.com> Signed-off-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Link: https://lore.kernel.org/r/20200325220746.29601-3-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Rander Wang authored
Update topology and reflect change to unified machine driver for SoundWire. Signed-off-by:
Rander Wang <rander.wang@intel.com> Signed-off-by:
-
Mark Brown authored
Merge branch 'for-5.6' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-5.7
-
Mark Brown authored
Merge series "ASoC: remove rtd->cpu/codec_dai{s}" from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: Hi Mark Now, CPU/Codec DAI(s) were replaced by rtd->dais. Thus, We don't need rtd->cpu/codec_dai{s} anymore. This pathset replaces it by new macro. Kuninori Morimoto (36): ASoC: soc-core: add asoc_rtd_to_cpu/codec() macro ASoC: amd: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer ASoC: atmel: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer ASoC: au1x: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer ASoC: bcm: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer ASoC: cirrus: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer ASoC: dwc: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer ASoC: fsl: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer ASoC: generic: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer ASoC: img: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer ASoC: intel: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer ASoC: kirkwood: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer ASoC: mediatek: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer ASoC: meson: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer ASoC: mxs: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer ASoC: pxa: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer ASoC: qcom: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer ASoC: rockchip: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer ASoC: samsung: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer ASoC: sh: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer ASoC: sof: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer ASoC: sprd: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer ASoC: stm: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer ASoC: sunxi: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer ASoC: tegra: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer ASoC: ti: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer ASoC: txx9: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer ASoC: uniphier: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer ASoC: ux500: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer ASoC: xtensa: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer ASoC: arm: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer ASoC: codecs: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer ASoC: soc: use asoc_rtd_to_cpu() / asoc_rtd_to_codec() macro for DAI pointer ASoC: soc-core: set rtd->num_cpu/codec at soc_new_pcm_runtime() ASoC: soc-core: tidyup soc_new_pcm_runtime() rtd setups ASoC: soc-core: remove cpu_dai/codec_dai/cpu_dais/codec_dais include/sound/soc.h | 30 +++++++------ sound/arm/pxa2xx-pcm-lib.c | 8 ++-- sound/soc/amd/acp-da7219-max98357a.c | 2 +- sound/soc/amd/acp-rt5645.c | 4 +- sound/soc/amd/acp3x-rt5682-max9836.c | 6 +-- sound/soc/atmel/atmel-pcm-dma.c | 4 +- sound/soc/atmel/atmel-pcm-pdc.c | 2 +- sound/soc/atmel/atmel_wm8904.c | 2 +- sound/soc/atmel/mikroe-proto.c | 2 +- sound/soc/atmel/sam9g20_wm8731.c | 2 +- sound/soc/atmel/sam9x5_wm8731.c | 2 +- sound/soc/au1x/db1200.c | 2 +- sound/soc/au1x/dbdma2.c | 2 +- sound/soc/au1x/dma.c | 2 +- sound/soc/au1x/psc-ac97.c | 2 +- sound/soc/bcm/bcm63xx-pcm-whistler.c | 16 +++---- sound/soc/bcm/cygnus-pcm.c | 22 +++++----- sound/soc/cirrus/edb93xx.c | 4 +- sound/soc/cirrus/snappercl15.c | 4 +- sound/soc/codecs/cs47l15.c | 4 +- sound/soc/codecs/cs47l24.c | 6 +-- sound/soc/codecs/cs47l35.c | 6 +-- sound/soc/codecs/cs47l85.c | 6 +-- sound/soc/codecs/cs47l90.c | 6 +-- sound/soc/codecs/cs47l92.c | 4 +- sound/soc/codecs/wm5110.c | 6 +-- sound/soc/codecs/wm_adsp.c | 10 ++--- sound/soc/dwc/dwc-pcm.c | 2 +- sound/soc/fsl/eukrea-tlv320.c | 4 +- sound/soc/fsl/fsl-asoc-card.c | 10 ++--- sound/soc/fsl/fsl_asrc_dma.c | 6 +-- sound/soc/fsl/fsl_spdif.c | 10 ++--- sound/soc/fsl/fsl_ssi.c | 8 ++-- sound/soc/fsl/imx-audmix.c | 8 ++-- sound/soc/fsl/imx-mc13783.c | 4 +- sound/soc/fsl/imx-sgtl5000.c | 2 +- sound/soc/fsl/mpc5200_dma.c | 10 ++--- sound/soc/fsl/mpc5200_psc_i2s.c | 2 +- sound/soc/fsl/mpc8610_hpcd.c | 4 +- sound/soc/fsl/mx27vis-aic32x4.c | 4 +- sound/soc/fsl/p1022_ds.c | 4 +- sound/soc/fsl/p1022_rdk.c | 4 +- sound/soc/fsl/wm1133-ev1.c | 6 +-- sound/soc/generic/simple-card-utils.c | 12 +++--- sound/soc/img/img-i2s-in.c | 2 +- sound/soc/img/img-i2s-out.c | 2 +- sound/soc/intel/atom/sst-mfld-platform-pcm.c | 6 +-- sound/soc/intel/boards/bdw-rt5650.c | 6 +-- sound/soc/intel/boards/bdw-rt5677.c | 6 +-- sound/soc/intel/boards/broadwell.c | 4 +- sound/soc/intel/boards/bxt_da7219_max98357a.c | 8 ++-- sound/soc/intel/boards/bxt_rt298.c | 8 ++-- sound/soc/intel/boards/byt-max98090.c | 2 +- sound/soc/intel/boards/byt-rt5640.c | 4 +- sound/soc/intel/boards/bytcht_cx2072x.c | 10 ++--- sound/soc/intel/boards/bytcht_da7213.c | 8 ++-- sound/soc/intel/boards/bytcht_es8316.c | 8 ++-- sound/soc/intel/boards/bytcht_nocodec.c | 4 +- sound/soc/intel/boards/bytcr_rt5640.c | 8 ++-- sound/soc/intel/boards/bytcr_rt5651.c | 8 ++-- sound/soc/intel/boards/cht_bsw_max98090_ti.c | 6 +-- sound/soc/intel/boards/cht_bsw_nau8824.c | 4 +- sound/soc/intel/boards/cht_bsw_rt5645.c | 14 +++---- sound/soc/intel/boards/cht_bsw_rt5672.c | 8 ++-- sound/soc/intel/boards/cml_rt1011_rt5682.c | 6 +-- sound/soc/intel/boards/glk_rt5682_max98357a.c | 10 ++--- sound/soc/intel/boards/haswell.c | 2 +- sound/soc/intel/boards/kbl_da7219_max98357a.c | 8 ++-- sound/soc/intel/boards/kbl_da7219_max98927.c | 6 +-- sound/soc/intel/boards/kbl_rt5660.c | 6 +-- sound/soc/intel/boards/kbl_rt5663_max98927.c | 8 ++-- .../intel/boards/kbl_rt5663_rt5514_max98927.c | 8 ++-- .../soc/intel/boards/skl_nau88l25_max98357a.c | 12 +++--- sound/soc/intel/boards/skl_nau88l25_ssm4567.c | 16 +++---- sound/soc/intel/boards/skl_rt286.c | 8 ++-- sound/soc/intel/boards/sof_da7219_max98373.c | 8 ++-- sound/soc/intel/boards/sof_pcm512x.c | 8 ++-- sound/soc/intel/boards/sof_rt5682.c | 6 +-- sound/soc/intel/haswell/sst-haswell-pcm.c | 26 ++++++------ sound/soc/intel/skylake/skl-pcm.c | 10 ++--- sound/soc/kirkwood/armada-370-db.c | 2 +- sound/soc/kirkwood/kirkwood-dma.c | 2 +- sound/soc/mediatek/common/mtk-afe-fe-dai.c | 10 ++--- .../mediatek/common/mtk-afe-platform-driver.c | 2 +- sound/soc/mediatek/mt2701/mt2701-afe-pcm.c | 2 +- sound/soc/mediatek/mt2701/mt2701-cs42448.c | 4 +- sound/soc/mediatek/mt2701/mt2701-wm8960.c | 4 +- sound/soc/mediatek/mt6797/mt6797-afe-pcm.c | 2 +- sound/soc/mediatek/mt8173/mt8173-afe-pcm.c | 2 +- sound/soc/mediatek/mt8173/mt8173-max98090.c | 4 +- .../mediatek/mt8173/mt8173-rt5650-rt5514.c | 2 +- .../mediatek/mt8173/mt8173-rt5650-rt5676.c | 4 +- sound/soc/mediatek/mt8173/mt8173-rt5650.c | 6 +-- sound/soc/mediatek/mt8183/mt8183-afe-pcm.c | 2 +- .../mediatek/mt8183/mt8183-da7219-max98357.c | 4 +- .../mt8183/mt8183-mt6358-ts3a227-max98357.c | 2 +- sound/soc/meson/aiu-fifo.c | 2 +- sound/soc/meson/axg-card.c | 8 ++-- sound/soc/meson/axg-fifo.c | 2 +- sound/soc/meson/meson-card-utils.c | 2 +- sound/soc/mxs/mxs-sgtl5000.c | 4 +- sound/soc/pxa/brownstone.c | 4 +- sound/soc/pxa/corgi.c | 4 +- sound/soc/pxa/hx4700.c | 4 +- sound/soc/pxa/imote2.c | 4 +- sound/soc/pxa/magician.c | 8 ++-- sound/soc/pxa/mioa701_wm9713.c | 4 +- sound/soc/pxa/mmp-pcm.c | 2 +- sound/soc/pxa/mmp-sspa.c | 2 +- sound/soc/pxa/poodle.c | 4 +- sound/soc/pxa/pxa2xx-i2s.c | 2 +- sound/soc/pxa/spitz.c | 4 +- sound/soc/pxa/ttc-dkb.c | 2 +- sound/soc/pxa/z2.c | 4 +- sound/soc/pxa/zylonite.c | 6 +-- sound/soc/qcom/apq8016_sbc.c | 2 +- sound/soc/qcom/apq8096.c | 6 +-- sound/soc/qcom/lpass-platform.c | 2 +- sound/soc/qcom/qdsp6/q6asm-dai.c | 4 +- sound/soc/qcom/qdsp6/q6routing.c | 2 +- sound/soc/qcom/sdm845.c | 22 +++++----- sound/soc/qcom/storm.c | 2 +- sound/soc/rockchip/rk3288_hdmi_analog.c | 4 +- sound/soc/rockchip/rk3399_gru_sound.c | 16 +++---- sound/soc/rockchip/rockchip_max98090.c | 6 +-- sound/soc/rockchip/rockchip_rt5645.c | 6 +-- sound/soc/samsung/arndale.c | 6 +-- sound/soc/samsung/bells.c | 16 +++---- sound/soc/samsung/h1940_uda1380.c | 2 +- sound/soc/samsung/i2s.c | 2 +- sound/soc/samsung/jive_wm8750.c | 4 +- sound/soc/samsung/littlemill.c | 14 +++---- sound/soc/samsung/lowland.c | 4 +- sound/soc/samsung/neo1973_wm8753.c | 10 ++--- sound/soc/samsung/odroid.c | 2 +- sound/soc/samsung/pcm.c | 4 +- sound/soc/samsung/rx1950_uda1380.c | 2 +- sound/soc/samsung/s3c-i2s-v2.c | 2 +- sound/soc/samsung/s3c24xx_simtec.c | 4 +- sound/soc/samsung/s3c24xx_uda134x.c | 6 +-- sound/soc/samsung/smartq_wm8987.c | 4 +- sound/soc/samsung/smdk_spdif.c | 2 +- sound/soc/samsung/smdk_wm8580.c | 2 +- sound/soc/samsung/smdk_wm8994.c | 2 +- sound/soc/samsung/smdk_wm8994pcm.c | 4 +- sound/soc/samsung/snow.c | 4 +- sound/soc/samsung/spdif.c | 8 ++-- sound/soc/samsung/speyside.c | 8 ++-- sound/soc/samsung/tm2_wm5110.c | 16 +++---- sound/soc/samsung/tobermory.c | 8 ++-- sound/soc/sh/dma-sh7760.c | 16 +++---- sound/soc/sh/fsi.c | 2 +- sound/soc/sh/migor.c | 6 +-- sound/soc/sh/rcar/core.c | 2 +- sound/soc/soc-compress.c | 36 ++++++++-------- sound/soc/soc-core.c | 42 +++++++------------ sound/soc/soc-dapm.c | 4 +- sound/soc/soc-generic-dmaengine-pcm.c | 6 +-- sound/soc/soc-pcm.c | 30 ++++++------- sound/soc/sof/intel/hda-dai.c | 6 +-- sound/soc/sof/intel/hda-dsp.c | 2 +- sound/soc/sprd/sprd-pcm-compress.c | 4 +- sound/soc/sprd/sprd-pcm-dma.c | 2 +- sound/soc/stm/stm32_adfsdm.c | 12 +++--- sound/soc/stm/stm32_sai_sub.c | 2 +- sound/soc/sunxi/sun4i-spdif.c | 2 +- sound/soc/tegra/tegra_alc5632.c | 2 +- sound/soc/tegra/tegra_max98090.c | 2 +- sound/soc/tegra/tegra_rt5640.c | 2 +- sound/soc/tegra/tegra_rt5677.c | 2 +- sound/soc/tegra/tegra_sgtl5000.c | 2 +- sound/soc/tegra/tegra_wm8753.c | 2 +- sound/soc/tegra/tegra_wm8903.c | 6 +-- sound/soc/tegra/trimslice.c | 2 +- sound/soc/ti/ams-delta.c | 4 +- sound/soc/ti/davinci-evm.c | 4 +- sound/soc/ti/davinci-vcif.c | 4 +- sound/soc/ti/n810.c | 2 +- sound/soc/ti/omap-abe-twl6040.c | 6 +-- sound/soc/ti/omap-mcbsp-st.c | 2 +- sound/soc/ti/omap-mcbsp.c | 4 +- sound/soc/ti/omap-mcpdm.c | 2 +- sound/soc/ti/omap3pandora.c | 4 +- sound/soc/ti/osk5912.c | 2 +- sound/soc/ti/rx51.c | 2 +- sound/soc/txx9/txx9aclc.c | 2 +- sound/soc/uniphier/aio-compress.c | 22 +++++----- sound/soc/uniphier/aio-dma.c | 6 +-- sound/soc/ux500/mop500_ab8500.c | 6 +-- sound/soc/ux500/ux500_pcm.c | 8 ++-- sound/soc/xtensa/xtfpga-i2s.c | 2 +- 191 files changed, 573 insertions(+), 577 deletions(-) -- 2.17.1 -
Mark Brown authored
Merge series "ASoC: SOF: Intel: add SoundWire support" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: This patchset provides the support for SoundWire support on Intel CometLake, IcelLake and TigerLake RVP platforms and form-factor devices to be released 'soon'. The bulk of the code is about detecting a valid SoundWire configuration from ACPI, and implementing the interfaces suggested in '[PATCH 0/8] soundwire: remove platform devices, add SOF interfaces' for interrupts, PCI wakes and clock-stop configurations. Since that SoundWire series will not be in 5.7, the build support for SOF w/ SoundWire is not provided for now, and fall-back functions will be used. This code is tested on a daily basis in the SOF tree and is not expected to change in significant ways. Changes since v2: Corrected error in ACPI table (thanks Amadeusz) Added patch 11 to add reset cycle required on some SoundWire platforms Bard Liao (1): ASoC: SOF: Intel: hda: merge IPC, stream and SoundWire interrupt handlers Pierre-Louis Bossart (8): ASoC: soc-acpi: expand description of _ADR-based devices ASoC: SOF: Intel: add SoundWire configuration interface ASoC: SOF: IPC: dai-intel: move ALH declarations in header file ASoC: SOF: Intel: hda: add SoundWire stream config/free callbacks ASoC: SOF: Intel: hda: initial SoundWire machine driver autodetect ASoC: SOF: Intel: hda: disable SoundWire interrupts on suspend ASoC: SOF: Intel: hda: add parameter to control SoundWire clock stop quirks ASoC: SOF: Intel: hda-ctrl: add reset cycle before parsing capabilities Rander Wang (2): ASoC: SOF: Intel: hda: add WAKEEN interrupt support for SoundWire Asoc: SOF: Intel: hda: check SoundWire wakeen interrupt in irq thread include/sound/soc-acpi.h | 39 +- include/sound/sof/dai-intel.h | 18 +- .../intel/common/soc-acpi-intel-cml-match.c | 87 +++- .../intel/common/soc-acpi-intel-icl-match.c | 97 ++++- .../intel/common/soc-acpi-intel-tgl-match.c | 49 ++- sound/soc/sof/intel/hda-ctrl.c | 25 +- sound/soc/sof/intel/hda-dsp.c | 2 + sound/soc/sof/intel/hda-loader.c | 31 ++ sound/soc/sof/intel/hda.c | 400 ++++++++++++++++++ sound/soc/sof/intel/hda.h | 66 +++ 10 files changed, 750 insertions(+), 64 deletions(-) -- 2.20.1 -
Shuming Fan authored
The SoundWire mode doesn't need the DAI clocks. Therefore, the DAI clock registry moves to I2S mode case. Signed-off-by:
Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20200327073849.18291-1-shumingf@realtek.comSigned-off-by:
-
Wolfram Sang authored
Move away from the deprecated API and return the shiny new ERRPTR where useful. Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Link: https://lore.kernel.org/r/20200326211010.13471-2-wsa+renesas@sang-engineering.comSigned-off-by:
-
Pierre-Louis Bossart authored
Without this cycle, HDaudio capability parsing fails on some devices. Signed-off-by:
-
Rander Wang authored
If pci device is in D0, wakeen interrupt will be aggregated at cAVS level as interrupt. This commit check the wakeen status and process it in irq thread Signed-off-by:
-
Rander Wang authored
When a SoundWire link is in clock stop state, a Slave device may wake up the Master for some events such as jack detection. The WAKEEN interrupt will be triggered and processed by the audio pci device. If audio device is in D3, the interrupt will be routed to PME, or aggregated at cAVS level as interrupt when audio device is in D0. This patch only supports D3 case, where the audio pci device will be resumed by a PME event and the WAKEEN interrupt will be processed after audio pci device is powered up and ROM is initialized successfully. The WAKEEN handling is only enabled after the first boot due to dependencies on a shim_lock mutex being initialized. Signed-off-by:
-
