1. 15 Sep, 2011 26 commits
  2. 13 Sep, 2011 6 commits
    • Johannes Berg's avatar
      iwlagn: fix command queue timeout · 282cdb32
      Johannes Berg authored
      If the command queue is constantly busy,
      which can happen in P2P, the hangcheck
      timer will frequently find a command in
      it and will eventually reset the device
      because nothing sets the timestamp for
      this queue when commands are processed.
      
      Fix this by setting the timestamp when
      a command completes.
      
      Cc: stable@kernel.org #2.6.39, #3.0.0 #3.1.0
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      SIgned-off-by: default avatarWey-Yi Guy <wey-yi.w.guy@intel.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      282cdb32
    • Johannes Berg's avatar
      iwlagn: fix stack corruption · 456fc37e
      Johannes Berg authored
      Alexander reported a strange crash in iwlagn that
      Meenakshi and Wey couldn't reproduce. I just ran
      into the same issue and tracked it down to stack
      corruption. This fixes it.
      
      The problem was introduced in
      commit 4b8b99b6e650d0527f3a123744b7459976581d14
      Author: Wey-Yi Guy <wey-yi.w.guy@intel.com>
      Date:   Fri Jul 8 14:29:48 2011 -0700
      
          iwlagn: radio sensor offset in le16 format
      
      Cc: Wey-Yi Guy <wey-yi.w.guy@intel.com>
      Cc: Meenakshi Venkataraman <meenakshi.venkataraman@intel.com>
      Reported-by: default avatarAlexander Diewald <alex@diewald.cc>
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      456fc37e
    • Mohammed Shafi Shajakhan's avatar
      ath9k: Fix kernel panic on unplugging the device · 6a6b3f3e
      Mohammed Shafi Shajakhan authored
      when the device is yanked out ath_pci_remove starts doing the cleanups,
      unregistering the hardware etc. so we should bail out immediately when
      we get drv_flush callback from mac80211 when the card is being unplugged.
      the panic occurs after we had associated to an AP.
      
      	EIP: 0060:[<fb315b00>] EFLAGS: 00010246 CPU: 0
      	EIP is at ath_reset+0xa0/0x1c0 [ath9k]
      	EAX: 00000000 EBX: 000697c0 ECX: 00000002 EDX: f3c3ccf0
      	ESI: 00000000 EDI: 00000000 EBP: f43e7b78 ESP: f43e7b50
       	DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068
       	Process kworker/u:2 (pid: 182, ti=f43e6000 task=f3c3c7c0
      	task.ti=f43e6000)
       	Stack:
       	0000002a 00000000 00000000 003e7b78 0000000f eaaa8500
      	ffffffea eaaa97c0
       	eaaaa000 00000001 f43e7ba8 fb315d23 f99e7721 ecece680
      	eaaac738 eaaa8500
       	eaaaa020 000000c8 000000c8 00000000 eaaa8d58 eaaa8500
      	f43e7bd0 fb080b29
       	Call Trace:
      	[<fb315d23>] ath9k_flush+0x103/0x170 [ath9k]
      	[<fb080b29>] __ieee80211_recalc_idle+0x2c9/0x400
      	[mac80211]
      	[<fb080c8e>] ieee80211_recalc_idle+0x2e/0x60 [mac80211]
      	[<fb07aa73>] ieee80211_mgd_deauth+0x173/0x210 [mac80211]
      	[<fb084559>] ieee80211_deauth+0x19/0x20 [mac80211]
      	[<f99dda53>] __cfg80211_mlme_deauth+0xf3/0x140
      	[cfg80211]
      	[<c0633d00>] ? __mutex_lock_common+0x1f0/0x380
      	[<f99e1b5d>] __cfg80211_disconnect+0x18d/0x1f0
      	[cfg80211]
      	[<f99c8199>] cfg80211_netdev_notifier_call+0x159/0x5c0
      	[cfg80211]
      	[<c0608a64>] ? packet_notifier+0x174/0x1f0
      	[<c0639202>] notifier_call_chain+0x82/0xb0
      	[<c0170d8f>] raw_notifier_call_chain+0x1f/0x30
      	[<c053b86c>] call_netdevice_notifiers+0x2c/0x60
      	[<c0182184>] ? trace_hardirqs_on_caller+0xf4/0x180
      	[<c053b8ec>] __dev_close_many+0x4c/0xd0
      	[<c053ba2d>] dev_close_many+0x6d/0xc0
      	[<c053bb53>] rollback_registered_many+0x93/0x1c0
      	[<c018221b>] ? trace_hardirqs_on+0xb/0x10
      	[<c053bc95>] unregister_netdevice_many+0x15/0x50
      	[<fb07f83b>] ieee80211_remove_interfaces+0x7b/0xb0
      	[mac80211]
      	[<fb06a14b>] ieee80211_unregister_hw+0x4b/0x110
      	[mac80211]
      	[<fb311a4a>] ath9k_deinit_device+0x3a/0x60 [ath9k]
      	[<fb31eed6>] ath_pci_remove+0x46/0x90 [ath9k]
      	[<c03b4ac4>] pci_device_remove+0x44/0x100
      	[<c043eb54>] __device_release_driver+0x64/0xb0
      	[<c043ec67>] device_release_driver+0x27/0x40
      	[<c043deeb>] bus_remove_device+0x7b/0xa0
      	[<c043c491>] device_del+0xf1/0x180
      	[<c043c530>] device_unregister+0x10/0x20
      	[<c03afafe>] pci_stop_bus_device+0x6e/0x80
      	[<c03afb72>] pci_remove_bus_device+0x12/0xa0
      	[<c03c2f29>] pciehp_unconfigure_device+0x89/0x180
      	[<c0181e54>] ? mark_held_locks+0x64/0x100
      	[<c063390f>] ? __mutex_unlock_slowpath+0xaf/0x140
      	[<c03c1f84>] pciehp_disable_slot+0x64/0x1b0
      	[<c03c2850>] pciehp_power_thread+0xd0/0x100
      	[<c0164ad0>] ? process_one_work+0x100/0x4d0
      	[<c0164b4c>] process_one_work+0x17c/0x4d0
      	[<c0164ad0>] ? process_one_work+0x100/0x4d0
      	[<c03c2780>] ? queue_interrupt_event+0xa0/0xa0
      	[<c01662bb>] worker_thread+0x13b/0x320
      	[<c018221b>] ? trace_hardirqs_on+0xb/0x10
      	[<c0166180>] ? manage_workers+0x1e0/0x1e0
      	[<c016a654>] kthread+0x84/0x90
      	[<c016a5d0>] ? __init_kthread_worker+0x60/0x60
      	[<c063d106>] kernel_thread_helper+0x6/0x10
      
      Cc: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
      Signed-off-by: default avatarMohammed Shafi Shajakhan <mohammed@qca.qualcomm.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      6a6b3f3e
    • Johannes Berg's avatar
      mac80211: fix missing sta_lock in __sta_info_destroy · 4bae7d97
      Johannes Berg authored
      Since my commit 34e89507
      ("mac80211: allow station add/remove to sleep") there is
      a race in mac80211 when it clears the TIM bit because a
      sleeping station disconnected, the spinlock isn't held
      around the relevant code any more. Use the right API to
      acquire the spinlock correctly.
      
      Cc: stable@kernel.org [2.6.34+]
      Signed-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      4bae7d97
    • George's avatar
      rtlwifi: Fix problem when switching connections · bac2555c
      George authored
      The driver fails to clear encryption keys making it impossible
      to switch connections.
      Signed-off-by: default avatarGeorge <george0505@realtek.com>
      Signed-off-by: default avatarLarry Finger <Larry.Finger@lwfinger.net>
      Cc: Stable <stable@kernel.org>        [2.6.39+]
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      bac2555c
    • George's avatar
      rtlwifi: rtl8192su: Fix problem connecting to HT-enabled AP · 3401dc6e
      George authored
      The driver fails to connect to 802.11n-enabled APs. The patch fixes
      Bug #42262.
      Signed-off-by: default avatarGeorge <george0505@realtek.com>
      Signed-off-by: default avatarLarry Finger <Larry.Finger@lwfinger.net>
      Cc: Stable <stable@kernel.org>        [2.6.39+]
      Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
      3401dc6e
  3. 30 Aug, 2011 1 commit
  4. 29 Aug, 2011 2 commits
  5. 26 Aug, 2011 5 commits