- 08 Oct, 2021 19 commits
-
-
Fabian Wüthrich authored
The sensor orientation is read from the _PLC ACPI buffer and converted to a v4l2 format. The sensor rotation is read from the SSDB ACPI buffer and converted into degrees. Signed-off-by: Fabian Wüthrich <me@fabwu.ch> Reviewed-by: Daniel Scally <djrscally@gmail.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Dikshita Agarwal authored
- Get the min buffer count required by FW from source event change and use the same value to decide actual buffer count and for buffer size calculation. - Setup DPB and OPB buffers after session continue incase of reconfig. Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Dikshita Agarwal authored
Consider alignment while calculating NUM_MBS. Co-developed-by: Mansur Alisha Shaik <mansur@codeaurora.org> Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org> Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Dikshita Agarwal authored
Set work route to FW based on num of vpp pipes. Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Dikshita Agarwal authored
AON register programming is used to set NOC to low power mode during V6 power off sequence. However AON register memory map is not applicable to 1pipe, hence skipping AON register programming. Co-developed-by: Mansur Alisha Shaik <mansur@codeaurora.org> Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org> Co-developed-by: Vikash Garodia <vgarodia@codeaurora.org> Signed-off-by: Vikash Garodia <vgarodia@codeaurora.org> Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Dikshita Agarwal authored
V6 HW can have vpp pipes as 1 or 4, add num_vpp_pipes to resource struture to differentiate. Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Dikshita Agarwal authored
Adds a sm7280 compatible binding to the venus core. Co-developed-by: Mansur Alisha Shaik <mansur@codeaurora.org> Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org> Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Dikshita Agarwal authored
Enable no tz FW loading and add routine to reset XTSS. Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Dikshita Agarwal authored
Add a schema description for the venus video encoder/decoder on the sc7280. Signed-off-by: Dikshita Agarwal <dikshita@codeaurora.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Mansur Alisha Shaik authored
In existing video driver implementation vpp frequency calculation in calculate_inst_freq() is always zero because the value of vpp_freq_per_mb is always zero for decoder. Fixed this by correcting the calculating the vpp frequency calculation for decoder. Fixes: 3cfe5815 ("media: venus: Enable low power setting for encoder") Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Mansur Alisha Shaik authored
Video driver maintains an internal context for the output buffer size. During S_fmt() on capture plane, the output buffer size is not updated in driver context. As a result, during buf_prepare(), the size of the vb2_plane and internal size of the buffer, as maintained by the driver, does not match. This leads to buf_prepare() failure. Update the instance context for the output buffer size during s_fmt(). Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Mansur Alisha Shaik authored
In current video driver implementation in calculate_inst_freq() frequency is calculated based on filled_len. The filled_len may vary frame to frame, because of this in load_scale_v4() since frequency is calculated for all instances, driver is throwing false warning like "HW is overloaded". Hence to handle this, changed log level to low log message. Since the actual session rejection is happening in decide_core() based on load. Signed-off-by: Mansur Alisha Shaik <mansur@codeaurora.org> Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Arnd Bergmann authored
gcc notices that the driver mixes 'dma_addr_t' 'u8 *' and 'u32' to store DMA addresses: drivers/media/platform/omap/omap_vout.c: In function 'omap_vout_vb2_prepare': drivers/media/platform/omap/omap_vout.c:979:37: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] vout->queued_buf_addr[vb->index] = (u8 *)buf_phy_addr; ^ drivers/media/platform/omap/omap_vout.c: In function 'omap_vout_create_video_devices': drivers/media/platform/omap/omap_vout.c:1479:21: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] vout->fbuf.base = (void *)info.paddr; Use dma_addr_t everywhere here to avoid the type conversions and document what the address is used for. Assigning to vout->fbuf.base still requires a cast, since that is part of the driver independent data structure. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Kieran Bingham authored
The V3U provides two VSPD instances, with a new update to the version register to detect the new SoC. Add the new version and model detection, and detail the features available in this module. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Kieran Bingham authored
In commit 6732f313 ("media: v4l: vsp1: Fix uif null pointer access") the handling of the UIF was over complicated, and the patch applied before review. Simplify it to keep the conditionals small. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Kieran Bingham authored
The WPF IRQ enable and status macros have been incorrectly named WFP. Fix them accordingly, and update all uses of the macros. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Mirela Rabulea authored
Remove soft reset between frames, which was merely a workaround, actually replace it with something less aggressive: clearing of jpeg stream buffer pointer, via STM_CTRL[BITBUF_PTR_CLR]. According to the reference manual, the BITBUF_PTR_CLR is performed on context switch, but, per hardware team recommendation, it is also working without context switch, which is the case for this driver, for now. Without soft reset and without BITBUF_PTR_CLR, successive encoding jobs continue from where the previous left off, basically writing past the v4l2 buffer. Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com> Reviewed-by: Robert Chiras <robert.chiras@nxp.com> Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Mirela Rabulea authored
Add some body to the dummy jpeg used to inject a default DHT. Use jpeg_image_red as compressed image data, insert it at the end of SOS, before EOI. The pure dummy jpeg was occasionally not working well on 8qxp C0. Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com> Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Mirela Rabulea authored
Found by Coverity scan. Signed-off-by: Mirela Rabulea <mirela.rabulea@nxp.com> Reviewed-by: Laurentiu Palcu <laurentiu.palcu@nxp.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
- 05 Oct, 2021 15 commits
-
-
Irui Wang authored
Set recommend min/max bitrate range for MT8173 h264/vp8 encoder. Signed-off-by: Irui Wang <irui.wang@mediatek.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Benjamin Gaignard authored
The AXI ID is an AXI bus configuration for improve bus performance. If read and write operations use different IDs the operations can be paralleled, whereas when they have the same ID the operations will be serialized. Right now, the write ID is fixed to 0 but we can set it to 0xff to get auto generated IDs to avoid possible conflicts. This change has no functional changes, but seems reasonable to let the hardware to autogenerate the ID instead of hardcoding in software. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Vladimir Barinov authored
This adds support for MEDIA_BUS_FMT_Y8_1X8 input and V4L2_PIX_FMT_GREY output format. Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Randy Dunlap authored
Keep all of the CEC menu items grouped together. By grouping all of these menu entries inside a menu/endmenu block, they are forced to be kept together and they are displayed/presented in a group for users. Tested with xconfig, gconfig, menuconfig, and nconfig. Fixes: 46d2a3b9 ("media: place CEC menu before MEDIA_SUPPORT") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Dan Carpenter authored
Preserve the error code stored in "dev->kthread_cec" before setting it to NULL. Fixes: 439e520995ab ("media: vivid: add signal-free time for cec message xfer") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Rikard Falkeborn authored
The only usage of vpu_m2m_ops is to pass its address to v4l2_m2m_init() which has a pointer to const struct v4l2_m2m_ops as argument. Make it const to allow the compiler to put it in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Colin Ian King authored
The call to ops->suspend for the dev->dev_next case can currently trigger a call on a null function pointer if ops->suspend is null. Skip over the use of function ops->suspend if it is null. Addresses-Coverity: ("Dereference after null check") Fixes: be7fd3c3 ("media: em28xx: Hauppauge DualHD second tuner functionality") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Krzysztof Kozlowski authored
The MODULE_DEVICE_TABLE already creates proper alias for platform driver. Having another MODULE_ALIAS causes the alias to be duplicated. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Yajun Deng authored
The open brace should be after a struct of define, that's good for searching. Signed-off-by: Yajun Deng <yajun.deng@linux.dev> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Niklas Söderlund authored
The access to the internal storage of the format rcar_csi2.mf should be serialized, extend the existing lock mutex to also cover this. While at it document the mutex. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Niklas Söderlund authored
The mutex was not destroyed on remove or failed probe, fix this. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Jammy Huang authored
The switch of jpeg 420/444 subsampling will update full jpeg header for aspeed now. Just update the 420/444 subsampling part of jpeg header is fine. Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Jernej Skrabec authored
Cedrus supports only YUV420 H264/H265 content and mostly only 8-bit colours (except on H6, where 10-bit are also supported). Add validation callback to SPS controls, which will reject unsupported combinations. Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Jernej Skrabec authored
Currently only H6 variant supports decoding 10-bit H265 videos. Add a capability flag, so driver could determine if 10-bit H265 slices should be allowed or not. Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Nadezda Lutovinova authored
If rcsi2_code_to_fmt() return NULL, then null pointer dereference occurs in the next cycle. That should not be possible now but adding checking protects from future bugs. The patch adds checking if format is NULL. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by: Nadezda Lutovinova <lutovinova@ispras.ru> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
- 04 Oct, 2021 1 commit
-
-
Mauro Carvalho Chehab authored
Linux 5.15-rc4 * tag 'v5.15-rc4': (320 commits) Linux 5.15-rc4 elf: don't use MAP_FIXED_NOREPLACE for elf interpreter mappings objtool: print out the symbol type when complaining about it kvm: fix objtool relocation warning cachefiles: Fix oops in trace_cachefiles_mark_buried due to NULL object drm/i915: fix blank screen booting crashes hwmon: (w83793) Fix NULL pointer dereference by removing unnecessary structure field hwmon: (w83792d) Fix NULL pointer dereference by removing unnecessary structure field hwmon: (w83791d) Fix NULL pointer dereference by removing unnecessary structure field hwmon: (pmbus/mp2975) Add missed POUT attribute for page 1 mp2975 controller hwmon: (pmbus/ibm-cffps) max_power_out swap changes hwmon: (occ) Fix P10 VRM temp sensors thermal: Update information in MAINTAINERS io_uring: kill fasync sched: Always inline is_percpu_thread() sched/fair: Null terminate buffer when updating tunable_scaling sched/fair: Add ancestors of unthrottled undecayed cfs_rq perf/core: fix userpage->time_enabled of inactive events perf/x86/intel: Update event constraints for ICX perf/x86: Reset destroy callback on event init failure ...
-
- 03 Oct, 2021 5 commits
-
-
Linus Torvalds authored
-
Chen Jingwen authored
In commit b212921b ("elf: don't use MAP_FIXED_NOREPLACE for elf executable mappings") we still leave MAP_FIXED_NOREPLACE in place for load_elf_interp. Unfortunately, this will cause kernel to fail to start with: 1 (init): Uhuuh, elf segment at 00003ffff7ffd000 requested but the memory is mapped already Failed to execute /init (error -17) The reason is that the elf interpreter (ld.so) has overlapping segments. readelf -l ld-2.31.so Program Headers: Type Offset VirtAddr PhysAddr FileSiz MemSiz Flags Align LOAD 0x0000000000000000 0x0000000000000000 0x0000000000000000 0x000000000002c94c 0x000000000002c94c R E 0x10000 LOAD 0x000000000002dae0 0x000000000003dae0 0x000000000003dae0 0x00000000000021e8 0x0000000000002320 RW 0x10000 LOAD 0x000000000002fe00 0x000000000003fe00 0x000000000003fe00 0x00000000000011ac 0x0000000000001328 RW 0x10000 The reason for this problem is the same as described in commit ad55eac7 ("elf: enforce MAP_FIXED on overlaying elf segments"). Not only executable binaries, elf interpreters (e.g. ld.so) can have overlapping elf segments, so we better drop MAP_FIXED_NOREPLACE and go back to MAP_FIXED in load_elf_interp. Fixes: 4ed28639 ("fs, elf: drop MAP_FIXED usage from elf_map") Cc: <stable@vger.kernel.org> # v4.19 Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@suse.com> Signed-off-by: Chen Jingwen <chenjingwen6@huawei.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "Fix a number of ext4 bugs in fast_commit, inline data, and delayed allocation. Also fix error handling code paths in ext4_dx_readdir() and ext4_fill_super(). Finally, avoid a grabbing a journal head in the delayed allocation write in the common cases where we are overwriting a pre-existing block or appending to an inode" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: recheck buffer uptodate bit under buffer lock ext4: fix potential infinite loop in ext4_dx_readdir() ext4: flush s_error_work before journal destroy in ext4_fill_super ext4: fix loff_t overflow in ext4_max_bitmap_size() ext4: fix reserved space counter leakage ext4: limit the number of blocks in one ADD_RANGE TLV ext4: enforce buffer head state assertion in ext4_da_map_blocks ext4: remove extent cache entries when truncating inline data ext4: drop unnecessary journal handle in delalloc write ext4: factor out write end code of inline file ext4: correct the error path of ext4_write_inline_data_end() ext4: check and update i_disksize properly ext4: add error checking to ext4_ext_replay_set_iblocks()
-
Linus Torvalds authored
The objtool warning that the kvm instruction emulation code triggered wasn't very useful: arch/x86/kvm/emulate.o: warning: objtool: __ex_table+0x4: don't know how to handle reloc symbol type: kvm_fastop_exception in that it helpfully tells you which symbol name it had trouble figuring out the relocation for, but it doesn't actually say what the unknown symbol type was that triggered it all. In this case it was because of missing type information (type 0, aka STT_NOTYPE), but on the whole it really should just have printed that out as part of the message. Because if this warning triggers, that's very much the first thing you want to know - why did reloc2sec_off() return failure for that symbol? So rather than just saying you can't handle some type of symbol without saying what the type _was_, just print out the type number too. Fixes: 24ff6525 ("objtool: Teach get_alt_entry() about more relocation types") Link: https://lore.kernel.org/lkml/CAHk-=wiZwq-0LknKhXN4M+T8jbxn_2i9mcKpO+OaBSSq_Eh7tg@mail.gmail.com/Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
The recent change to make objtool aware of more symbol relocation types (commit 24ff6525: "objtool: Teach get_alt_entry() about more relocation types") also added another check, and resulted in this objtool warning when building kvm on x86: arch/x86/kvm/emulate.o: warning: objtool: __ex_table+0x4: don't know how to handle reloc symbol type: kvm_fastop_exception The reason seems to be that kvm_fastop_exception() is marked as a global symbol, which causes the relocation to ke kept around for objtool. And at the same time, the kvm_fastop_exception definition (which is done as an inline asm statement) doesn't actually set the type of the global, which then makes objtool unhappy. The minimal fix is to just not mark kvm_fastop_exception as being a global symbol. It's only used in that one compilation unit anyway, so it was always pointless. That's how all the other local exception table labels are done. I'm not entirely happy about the kinds of games that the kvm code plays with doing its own exception handling, and the fact that it confused objtool is most definitely a symptom of the code being a bit too subtle and ad-hoc. But at least this trivial one-liner makes objtool no longer upset about what is going on. Fixes: 24ff6525 ("objtool: Teach get_alt_entry() about more relocation types") Link: https://lore.kernel.org/lkml/CAHk-=wiZwq-0LknKhXN4M+T8jbxn_2i9mcKpO+OaBSSq_Eh7tg@mail.gmail.com/ Cc: Borislav Petkov <bp@suse.de> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Wanpeng Li <wanpengli@tencent.com> Cc: Jim Mattson <jmattson@google.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-