1. 06 May, 2019 14 commits
  2. 04 May, 2019 7 commits
    • Ming Lei's avatar
      block: don't drain in-progress dispatch in blk_cleanup_queue() · 66215664
      Ming Lei authored
      Now freeing hw queue resource is moved to hctx's release handler,
      we don't need to worry about the race between blk_cleanup_queue and
      run queue any more.
      
      So don't drain in-progress dispatch in blk_cleanup_queue().
      
      This is basically revert of c2856ae2 ("blk-mq: quiesce queue before
      freeing queue").
      
      Cc: Dongli Zhang <dongli.zhang@oracle.com>
      Cc: James Smart <james.smart@broadcom.com>
      Cc: Bart Van Assche <bart.vanassche@wdc.com>
      Cc: linux-scsi@vger.kernel.org,
      Cc: Martin K . Petersen <martin.petersen@oracle.com>,
      Cc: Christoph Hellwig <hch@lst.de>,
      Cc: James E . J . Bottomley <jejb@linux.vnet.ibm.com>,
      Reviewed-by: default avatarBart Van Assche <bvanassche@acm.org>
      Reviewed-by: default avatarHannes Reinecke <hare@suse.com>
      Tested-by: default avatarJames Smart <james.smart@broadcom.com>
      Signed-off-by: default avatarMing Lei <ming.lei@redhat.com>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      66215664
    • Ming Lei's avatar
      blk-mq: move cancel of hctx->run_work into blk_mq_hw_sysfs_release · 1b97871b
      Ming Lei authored
      hctx is always released after requeue is freed.
      
      With holding queue's kobject refcount, it is safe for driver to run queue,
      so one run queue might be scheduled after blk_sync_queue() is done.
      
      So moving the cancel of hctx->run_work into blk_mq_hw_sysfs_release()
      for avoiding run released queue.
      
      Cc: Dongli Zhang <dongli.zhang@oracle.com>
      Cc: James Smart <james.smart@broadcom.com>
      Cc: Bart Van Assche <bart.vanassche@wdc.com>
      Cc: linux-scsi@vger.kernel.org,
      Cc: Martin K . Petersen <martin.petersen@oracle.com>,
      Cc: Christoph Hellwig <hch@lst.de>,
      Cc: James E . J . Bottomley <jejb@linux.vnet.ibm.com>,
      Reviewed-by: default avatarBart Van Assche <bvanassche@acm.org>
      Reviewed-by: default avatarHannes Reinecke <hare@suse.com>
      Tested-by: default avatarJames Smart <james.smart@broadcom.com>
      Signed-off-by: default avatarMing Lei <ming.lei@redhat.com>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      1b97871b
    • Ming Lei's avatar
      blk-mq: always free hctx after request queue is freed · 2f8f1336
      Ming Lei authored
      In normal queue cleanup path, hctx is released after request queue
      is freed, see blk_mq_release().
      
      However, in __blk_mq_update_nr_hw_queues(), hctx may be freed because
      of hw queues shrinking. This way is easy to cause use-after-free,
      because: one implicit rule is that it is safe to call almost all block
      layer APIs if the request queue is alive; and one hctx may be retrieved
      by one API, then the hctx can be freed by blk_mq_update_nr_hw_queues();
      finally use-after-free is triggered.
      
      Fixes this issue by always freeing hctx after releasing request queue.
      If some hctxs are removed in blk_mq_update_nr_hw_queues(), introduce
      a per-queue list to hold them, then try to resuse these hctxs if numa
      node is matched.
      
      Cc: Dongli Zhang <dongli.zhang@oracle.com>
      Cc: James Smart <james.smart@broadcom.com>
      Cc: Bart Van Assche <bart.vanassche@wdc.com>
      Cc: linux-scsi@vger.kernel.org,
      Cc: Martin K . Petersen <martin.petersen@oracle.com>,
      Cc: Christoph Hellwig <hch@lst.de>,
      Cc: James E . J . Bottomley <jejb@linux.vnet.ibm.com>,
      Reviewed-by: default avatarHannes Reinecke <hare@suse.com>
      Tested-by: default avatarJames Smart <james.smart@broadcom.com>
      Signed-off-by: default avatarMing Lei <ming.lei@redhat.com>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      2f8f1336
    • Ming Lei's avatar
      blk-mq: split blk_mq_alloc_and_init_hctx into two parts · 7c6c5b7c
      Ming Lei authored
      Split blk_mq_alloc_and_init_hctx into two parts, and one is
      blk_mq_alloc_hctx() for allocating all hctx resources, another
      is blk_mq_init_hctx() for initializing hctx, which serves as
      counter-part of blk_mq_exit_hctx().
      
      Cc: Dongli Zhang <dongli.zhang@oracle.com>
      Cc: James Smart <james.smart@broadcom.com>
      Cc: Bart Van Assche <bart.vanassche@wdc.com>
      Cc: linux-scsi@vger.kernel.org
      Cc: Martin K . Petersen <martin.petersen@oracle.com>
      Cc: Christoph Hellwig <hch@lst.de>
      Cc: James E . J . Bottomley <jejb@linux.vnet.ibm.com>
      Reviewed-by: default avatarHannes Reinecke <hare@suse.com>
      Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
      Tested-by: default avatarJames Smart <james.smart@broadcom.com>
      Signed-off-by: default avatarMing Lei <ming.lei@redhat.com>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      7c6c5b7c
    • Ming Lei's avatar
      blk-mq: free hw queue's resource in hctx's release handler · c7e2d94b
      Ming Lei authored
      Once blk_cleanup_queue() returns, tags shouldn't be used any more,
      because blk_mq_free_tag_set() may be called. Commit 45a9c9d9
      ("blk-mq: Fix a use-after-free") fixes this issue exactly.
      
      However, that commit introduces another issue. Before 45a9c9d9,
      we are allowed to run queue during cleaning up queue if the queue's
      kobj refcount is held. After that commit, queue can't be run during
      queue cleaning up, otherwise oops can be triggered easily because
      some fields of hctx are freed by blk_mq_free_queue() in blk_cleanup_queue().
      
      We have invented ways for addressing this kind of issue before, such as:
      
      	8dc765d4 ("SCSI: fix queue cleanup race before queue initialization is done")
      	c2856ae2 ("blk-mq: quiesce queue before freeing queue")
      
      But still can't cover all cases, recently James reports another such
      kind of issue:
      
      	https://marc.info/?l=linux-scsi&m=155389088124782&w=2
      
      This issue can be quite hard to address by previous way, given
      scsi_run_queue() may run requeues for other LUNs.
      
      Fixes the above issue by freeing hctx's resources in its release handler, and this
      way is safe becasue tags isn't needed for freeing such hctx resource.
      
      This approach follows typical design pattern wrt. kobject's release handler.
      
      Cc: Dongli Zhang <dongli.zhang@oracle.com>
      Cc: James Smart <james.smart@broadcom.com>
      Cc: Bart Van Assche <bart.vanassche@wdc.com>
      Cc: linux-scsi@vger.kernel.org,
      Cc: Martin K . Petersen <martin.petersen@oracle.com>,
      Cc: Christoph Hellwig <hch@lst.de>,
      Cc: James E . J . Bottomley <jejb@linux.vnet.ibm.com>,
      Reported-by: default avatarJames Smart <james.smart@broadcom.com>
      Fixes: 45a9c9d9 ("blk-mq: Fix a use-after-free")
      Cc: stable@vger.kernel.org
      Reviewed-by: default avatarHannes Reinecke <hare@suse.com>
      Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
      Tested-by: default avatarJames Smart <james.smart@broadcom.com>
      Signed-off-by: default avatarMing Lei <ming.lei@redhat.com>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      c7e2d94b
    • Ming Lei's avatar
      blk-mq: move cancel of requeue_work into blk_mq_release · fbc2a15e
      Ming Lei authored
      With holding queue's kobject refcount, it is safe for driver
      to schedule requeue. However, blk_mq_kick_requeue_list() may
      be called after blk_sync_queue() is done because of concurrent
      requeue activities, then requeue work may not be completed when
      freeing queue, and kernel oops is triggered.
      
      So moving the cancel of requeue_work into blk_mq_release() for
      avoiding race between requeue and freeing queue.
      
      Cc: Dongli Zhang <dongli.zhang@oracle.com>
      Cc: James Smart <james.smart@broadcom.com>
      Cc: Bart Van Assche <bart.vanassche@wdc.com>
      Cc: linux-scsi@vger.kernel.org,
      Cc: Martin K . Petersen <martin.petersen@oracle.com>,
      Cc: Christoph Hellwig <hch@lst.de>,
      Cc: James E . J . Bottomley <jejb@linux.vnet.ibm.com>,
      Reviewed-by: default avatarBart Van Assche <bvanassche@acm.org>
      Reviewed-by: default avatarJohannes Thumshirn <jthumshirn@suse.de>
      Reviewed-by: default avatarHannes Reinecke <hare@suse.com>
      Reviewed-by: default avatarChristoph Hellwig <hch@lst.de>
      Tested-by: default avatarJames Smart <james.smart@broadcom.com>
      Signed-off-by: default avatarMing Lei <ming.lei@redhat.com>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      fbc2a15e
    • Ming Lei's avatar
      blk-mq: grab .q_usage_counter when queuing request from plug code path · e87eb301
      Ming Lei authored
      Just like aio/io_uring, we need to grab 2 refcount for queuing one
      request, one is for submission, another is for completion.
      
      If the request isn't queued from plug code path, the refcount grabbed
      in generic_make_request() serves for submission. In theroy, this
      refcount should have been released after the sumission(async run queue)
      is done. blk_freeze_queue() works with blk_sync_queue() together
      for avoiding race between cleanup queue and IO submission, given async
      run queue activities are canceled because hctx->run_work is scheduled with
      the refcount held, so it is fine to not hold the refcount when
      running the run queue work function for dispatch IO.
      
      However, if request is staggered into plug list, and finally queued
      from plug code path, the refcount in submission side is actually missed.
      And we may start to run queue after queue is removed because the queue's
      kobject refcount isn't guaranteed to be grabbed in flushing plug list
      context, then kernel oops is triggered, see the following race:
      
      blk_mq_flush_plug_list():
              blk_mq_sched_insert_requests()
                      insert requests to sw queue or scheduler queue
                      blk_mq_run_hw_queue
      
      Because of concurrent run queue, all requests inserted above may be
      completed before calling the above blk_mq_run_hw_queue. Then queue can
      be freed during the above blk_mq_run_hw_queue().
      
      Fixes the issue by grab .q_usage_counter before calling
      blk_mq_sched_insert_requests() in blk_mq_flush_plug_list(). This way is
      safe because the queue is absolutely alive before inserting request.
      
      Cc: Dongli Zhang <dongli.zhang@oracle.com>
      Cc: James Smart <james.smart@broadcom.com>
      Cc: linux-scsi@vger.kernel.org,
      Cc: Martin K . Petersen <martin.petersen@oracle.com>,
      Cc: Christoph Hellwig <hch@lst.de>,
      Cc: James E . J . Bottomley <jejb@linux.vnet.ibm.com>,
      Reviewed-by: default avatarBart Van Assche <bvanassche@acm.org>
      Tested-by: default avatarJames Smart <james.smart@broadcom.com>
      Signed-off-by: default avatarMing Lei <ming.lei@redhat.com>
      Signed-off-by: default avatarJens Axboe <axboe@kernel.dk>
      e87eb301
  3. 02 May, 2019 2 commits
  4. 01 May, 2019 13 commits
  5. 30 Apr, 2019 4 commits