- 06 Oct, 2021 10 commits
-
-
Leo (Hanghong) Ma authored
[Why] During DQE's promotion test, error appears in dmesg at boot on dcn3.1; [How] Add NULL pointor check for the pointor to the amdgpu_dm_connector; Reviewed-by:
Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by:
Solomon Chiu <solomon.chiu@amd.com> Signed-off-by:
Leo (Hanghong) Ma <hanghong.ma@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Jimmy Kizito authored
[Why] Trying to enable multiple displays simultaneously exposed shortcomings with the algorithm for dynamic link encoder assignment. The main problems were: - Assuming stream order remained constant across states would sometimes lead to invalid DIG encoder assignment. - Incorrect logic for deciding whether or not a DIG could support a stream would also sometimes lead to invalid DIG encoder assignment. - Changes in encoder assignment were wholesale while updating of the pipe backend is incremental. This would lead to the hardware state not matching the software state even with valid encoder assignments. [How] The following changes fix the identified problems. - Use stream pointer rather than stream index to track streams across states. - Fix DIG compatibility check by examining the link signal type rather than the stream signal type. - Modify assignment algorithm to make incremental updates so software and hardware states remain coherent. Additionally: - Add assertions and an encoder assignment validation function link_enc_cfg_validate() to detect potential problems with encoder assignment closer to their root cause. - Reduce the frequency with which the assignment algorithm is executed. It should not be necessary for fast state validation. Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
Jimmy Kizito <Jimmy.Kizito@amd.com> Signed-off-by:
-
Leo (Hanghong) Ma authored
[Why & How] The codes to blank all dp display have been called many times, so add a helper in dc_link to make it more concise. Reviewed-by:
Aric Cyr <Aric.Cyr@amd.com> Acked-by:
-
Aric Cyr authored
This version brings along following fixes: - New firmware version - Fix DMUB problems on stress test. - Improve link training by skip overrride for preferred link - Refinement of FPU code structure for DCN2 - Fix 3DLUT skipped programming - Fix detection of 4 lane for DPALT - Fix dcn3 failure due to dmcbu_abm not created - Limit display scaling to up to 4k for DCN 3.1 - Add helper for blanking all dp displays Acked-by:
-
Anthony Koo authored
Acked-by:
Anthony Koo <Anthony.Koo@amd.com> Signed-off-by:
-
Hansen authored
[Why] DPALT detection for B0 PHY has its own set of RDPCSPIPE registers [How] Use RDPCSPIPE registers to detect if DPALT lane is 4 lane Reviewed-by:
Charlene Liu <Charlene.Liu@amd.com> Acked-by:
Hansen <Hansen.Dsouza@amd.com> Signed-off-by:
-
Nikola Cornij authored
[why] The existing limit was mistakenly bigger than 4k for DCN 3.1 Reviewed-by:
Zhan Liu <Zhan.Liu@amd.com> Acked-by:
Nikola Cornij <nikola.cornij@amd.com> Signed-off-by:
-
Jake Wang authored
[Why & How] Added root clock optimization debug flags for future debugging. Reviewed-by:
Jake Wang <haonan.wang2@amd.com> Signed-off-by:
-
Qingqing Zhuo authored
[Why] Current FPU code for DCN2x is located under dml/dcn2x. This is not aligned with DC's general source tree structure. [How] Move FPU code for DCN2x to dml/dcn20. Reviewed-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Acked-by:
Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by:
-
George Shen authored
[Why] Overriding link setting inside override_training_settings result in fallback link settings being ignored. This can potentially cause link training to always fail and consequently result in an infinite loop of link training to occur in dp_verify_link_cap during detection. [How] Since preferred link settings are already considered inside decide_link_settings, skip the check in override_training_settings to avoid infinite link training loops. Reviewed-by:
Wenjing Liu <wenjing.liu@amd.com> Acked-by:
George Shen <george.shen@amd.com> Signed-off-by:
-
- 05 Oct, 2021 5 commits
-
-
Guchun Chen authored
In current code, when a PCI error state pci_channel_io_normal is detectd, it will report PCI_ERS_RESULT_CAN_RECOVER status to PCI driver, and PCI driver will continue the execution of PCI resume callback report_resume by pci_walk_bridge, and the callback will go into amdgpu_pci_resume finally, where write lock is releasd unconditionally without acquiring such lock first. In this case, a deadlock will happen when other threads start to acquire the read lock. To fix this, add a member in amdgpu_device strucutre to cache pci_channel_state, and only continue the execution in amdgpu_pci_resume when it's pci_channel_io_frozen. Fixes: c9a6b82f ("drm/amdgpu: Implement DPC recovery") Suggested-by:
Andrey Grodzovsky <andrey.grodzovsky@amd.com> Signed-off-by:
Guchun Chen <guchun.chen@amd.com> Reviewed-by:
-
Christian König authored
Make sure that we notice this in error reports. Signed-off-by:
Christian König <christian.koenig@amd.com> Acked-by:
-
Christian König authored
This reverts commit 728e7e0c. Further discussion reveals that this feature is severely broken and needs to be reverted ASAP. GPU reset can never be delayed by userspace even for debugging or otherwise we can run into in kernel deadlocks. Signed-off-by:
Nirmoy Das <nirmoy.das@amd.com> Signed-off-by:
-
Yifan Zhang authored
This patch is to fix clinfo failure in Raven/Picasso: Number of platforms: 1 Platform Profile: FULL_PROFILE Platform Version: OpenCL 2.2 AMD-APP (3364.0) Platform Name: AMD Accelerated Parallel Processing Platform Vendor: Advanced Micro Devices, Inc. Platform Extensions: cl_khr_icd cl_amd_event_callback Platform Name: AMD Accelerated Parallel Processing Number of devices: 0 Signed-off-by:
Yifan Zhang <yifan1.zhang@amd.com> Reviewed-by:
James Zhu <James.Zhu@amd.com> Tested-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Yifan Zhang authored
kfd_resume doesn't involve iommu operation, remove redundant iommu cleanup code. Signed-off-by:
-
- 04 Oct, 2021 25 commits
-
-
Alex Deucher authored
Depends on DRM_AMDGPU_SI and DRM_AMD_DC Reviewed-by:
-
Alex Deucher authored
Use IP versions rather than asic_type to differentiate IP version specific features. Acked-by:
-
Wyatt Wood authored
[Why] Running into bugchecks during stress test where rptr is 0xFFFFFFFF. Typically this is caused by a hard hang, and can come from HW outside of DCN. [How] To prevent bugchecks when writing the DMUB rptr, fist check that the rptr is valid. Reviewed-by:
Wyatt Wood <wyatt.wood@amd.com> Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by:
-
Alex Deucher authored
No need for a separate kconfig option at this point. Reviewed-by:
-
Guo Zhengkui authored
Remove two repeated includings in line 46 and 47. Acked-by:
Guo Zhengkui <guozhengkui@vivo.com> Signed-off-by:
-
Lijo Lazar authored
In the rare event when GFX IP suspend coincides with a s0ix entry, don't schedule a delayed work, instead signal PMFW immediately to allow GFXOFF entry. GFXOFF is a prerequisite for s0ix entry. PMFW needs to be signaled about GFXOFF status before amd-pmc module passes OS HINT to PMFW telling that everything is ready for a safe s0ix entry. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1712Signed-off-by:
Lijo Lazar <lijo.lazar@amd.com> Reviewed-by:
Mario Limonciello <mario.limonciell@amd.com> Signed-off-by:
-
Alex Deucher authored
Not sure why that was there. Remove it. Reviewed-by:
-
Alex Deucher authored
IP_VERSION(11, 0, 13) does the exact same thing as IP_VERSION(11, 0, 12) so squash them together. Reviewed-by:
-
James Zhu authored
Add jpeg2.6 start/end with updated PCTL0_MMHUB_DEEPSLEEP_IB address. Signed-off-by:
Leo Liu <leo.lilu@amd.com> Signed-off-by:
-
James Zhu authored
Move jpeg2 shared macro to header file Signed-off-by:
-
Lang Yu authored
Memory is allocated for ttm->sg by kmalloc in kfd_mem_dmamap_userptr, but isn't freed by kfree in kfd_mem_dmaunmap_userptr. Free it! Fixes: 264fb4d3 ("drm/amdgpu: Add multi-GPU DMA mapping helpers") Signed-off-by:
Lang Yu <lang.yu@amd.com> Reviewed-by:
-
Alex Deucher authored
If you set amdgpu.discovery=2 you can force the the driver to fetch the IP discovery table from a file rather than from the table shipped on the device. This is useful for debugging and for device bring up and emulation when the tables may be in flux. Reviewed-by:
-
Alex Deucher authored
rather than asic type. v2: fix up CZ case Acked-by:
-
Alex Deucher authored
We can get the pdev and asic type from the adev. No need to pass them explicitly. v2: squash in build fix for !CONFIG_HSA_AMD from Anson Reviewed-by:
-
Alex Deucher authored
Handle SRIOV requirements when adding IP blocks. v2: add comment about UVD/VCE support on vega20 SR-IOV Acked-by:
-
Alex Deucher authored
Split into several smaller per IP functions to make it easier to handle ordering issues for things like SR-IOV in a follow up patch. Acked-by:
-
Alex Deucher authored
Allow us to query instances versions more cleanly. Instancing support is not consistent unfortunately. SDMA is a good example. Sienna cichlid has 4 total SDMA instances, each enumerated separately (HWIDs 42, 43, 68, 69). Arcturus has 8 total SDMA instances, but they are enumerated as multiple instances of the same HWIDs (4x HWID 42, 4x HWID 43). UMC is another example. On most chips there are multiple instances with the same HWID. This allows us to support both forms. v2: rebase v3: clarify instancing support Reviewed-by:
-
Alex Deucher authored
For new chips with no explicit entry in the PCI ID list. Reviewed-by:
-
Alex Deucher authored
Add a new asic type for asics where we don't have an explicit entry in the PCI ID list. We don't need an asic type for these asics, other than something higher than the existing ones, so just use this for all new asics. Reviewed-by:
-
Alex Deucher authored
Default to PSP ucode loading unless the user specifies direct. Acked-by:
-
Alex Deucher authored
Use the table rather than asic specific harvest registers. v2: remove harvesting register checking Signed-off-by: -
Alex Deucher authored
Handled by IP discovery now. Acked-by:
-
Alex Deucher authored
Handled by IP discovery now. Acked-by:
-
Alex Deucher authored
Rather than hardcoding it. We already have the number of VCN instances from a previous patch, so just update the VCN instances for chips with static tables. v2: squash in checks for SDMA3,4 (Guchun) v3: clarify VCN changes Reviewed-by:
-
Guchun Chen authored
They are missed. Acked-by:
-
