- 18 Oct, 2021 19 commits
-
-
Alvin Šipraga authored
Jakub pointed out that we have a new ethtool API for reporting device statistics in a standardized way, via .get_eth_{phy,mac,ctrl}_stats. Add a small amount of plumbing to allow DSA drivers to take advantage of this when exposing statistics. Suggested-by:Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Alvin Šipraga <alsi@bang-olufsen.dk> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Alvin Šipraga authored
Add a new EtherType ETH_P_REALTEK to the if_ether.h uapi header. The EtherType 0x8899 is used in a number of different protocols from Realtek Semiconductor Corp [1], so no general assumptions should be made when trying to decode such packets. Observed protocols include: 0x1 - Realtek Remote Control protocol [2] 0x2 - Echo protocol [2] 0x3 - Loop detection protocol [2] 0x4 - RTL8365MB 4- and 8-byte switch CPU tag protocols [3] 0x9 - RTL8306 switch CPU tag protocol [4] 0xA - RTL8366RB switch CPU tag protocol [4] [1] https://lore.kernel.org/netdev/CACRpkdYQthFgjwVzHyK3DeYUOdcYyWmdjDPG=Rf9B3VrJ12Rzg@mail.gmail.com/ [2] https://www.wireshark.org/lists/ethereal-dev/200409/msg00090.html [3] https://lore.kernel.org/netdev/20210822193145.1312668-4-alvin@pqrs.dk/ [4] https://lore.kernel.org/netdev/20200708122537.1341307-2-linus.walleij@linaro.org/Suggested-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Vladimir Oltean <olteanv@gmail.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Jakub Kicinski authored
Commit 406f42fa ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Signed-off-by:
-
Arnd Bergmann authored
Building the VF and PF side of this driver differently, with one being a loadable module and the other one built-in results in a link failure for the common PTP driver: ld.lld: error: undefined symbol: __this_module >>> referenced by otx2_ptp.c >>> net/ethernet/marvell/octeontx2/nic/otx2_ptp.o:(otx2_ptp_init) in archive drivers/built-in.a >>> referenced by otx2_ptp.c >>> net/ethernet/marvell/octeontx2/nic/otx2_ptp.o:(otx2_ptp_init) in archive drivers/built-in.a Move the otx2_ptp.c code into a separate module that gets built for both configurations, making it built-in if at least one of the other two is built-in. Fixes: 43510ef4 ("octeontx2-nicvf: Add PTP hardware clock support to NIX VF") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
David S. Miller authored
Kunihiko Hayashi says: ==================== net: ethernet: ave: Introduce UniPhier NX1 SoC support This series includes the patches to add basic support for new UniPhier NX1 SoC. NX1 SoC also has the same kinds of controls as the other UniPhier SoCs. ==================== Signed-off-by: -
Kunihiko Hayashi authored
Add basic support for UniPhier NX1 SoC. This includes a compatible string and SoC-dependent data. Signed-off-by:
Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Signed-off-by:
-
Kunihiko Hayashi authored
Update AVE binding document for UniPhier NX1 SoC. Signed-off-by:
-
Uwe Kleine-König authored
Up to now w5100_remove() returns zero unconditionally. Make it return void instead which makes it easier to see in the callers that there is no error to handle. Also the return value of platform and spi remove callbacks is ignored anyway. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by:
-
Uwe Kleine-König authored
Up to now ks8851_remove_common() returns zero unconditionally. Make it return void instead which makes it easier to see in the callers that there is no error to handle. Also the return value of platform and spi remove callbacks is ignored anyway. Signed-off-by:
-
David S. Miller authored
Sebastian Andrzej Siewior says: ==================== Try to simplify the gnet_stats and remove qdisc->running sequence counter. The first few patches is a follow up to https://lore.kernel.org/all/20211007175000.2334713-1-bigeasy@linutronix.de/ The remaining patches (#5+) remove the seqcount_t (Qdisc::running) from the Qdisc. The statistics (Qdisc::bstats and Qdisc::cpu_bstats) use u64_stats_t and the "running state" is now represented by a bit in Qdisc::state. By removing the seqcount_t from Qdisc and decoupling the bstats statistics from the seqcount_t it is possible to query the statistics even if the Qdisc is running instead of waiting until it is idle again. The try-lock like usage of the seqcount_t in qdisc_run_begin() is problematic on PREEMPT_RT. Inside the qdisc_run_begin/end() qdisc->running sequence counter write sections, at sch_direct_xmit(), the seqcount write serialization lock is released then re-acquired. This is fine for !RT, because the writer is in a BH disabled region and there is a no in-IRQ reader. For RT though, BH sections are preemptible. The earlier introduced seqcount_LOCKNAME_t mechanism, which for RT the reader acquires then relesaes the write serailization lock to avoid infinite spinning if it preempts a seqcount write section, cannot work: the qdisc->running write serialization lock is already intermittingly released inside the seqcount write section. ==================== Signed-off-by: -
Ahmed S. Darwish authored
The Qdisc::running sequence counter has two uses: 1. Reliably reading qdisc's tc statistics while the qdisc is running (a seqcount read/retry loop at gnet_stats_add_basic()). 2. As a flag, indicating whether the qdisc in question is running (without any retry loops). For the first usage, the Qdisc::running sequence counter write section, qdisc_run_begin() => qdisc_run_end(), covers a much wider area than what is actually needed: the raw qdisc's bstats update. A u64_stats sync point was thus introduced (in previous commits) inside the bstats structure itself. A local u64_stats write section is then started and stopped for the bstats updates. Use that u64_stats sync point mechanism for the bstats read/retry loop at gnet_stats_add_basic(). For the second qdisc->running usage, a __QDISC_STATE_RUNNING bit flag, accessed with atomic bitops, is sufficient. Using a bit flag instead of a sequence counter at qdisc_run_begin/end() and qdisc_is_running() leads to the SMP barriers implicitly added through raw_read_seqcount() and write_seqcount_begin/end() getting removed. All call sites have been surveyed though, and no required ordering was identified. Now that the qdisc->running sequence counter is no longer used, remove it. Note, using u64_stats implies no sequence counter protection for 64-bit architectures. This can lead to the qdisc tc statistics "packets" vs. "bytes" values getting out of sync on rare occasions. The individual values will still be valid. Signed-off-by:Ahmed S. Darwish <a.darwish@linutronix.de> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Ahmed S. Darwish authored
The only factor differentiating per-CPU bstats data type (struct gnet_stats_basic_cpu) from the packed non-per-CPU one (struct gnet_stats_basic_packed) was a u64_stats sync point inside the former. The two data types are now equivalent: earlier commits added a u64_stats sync point to the latter. Combine both data types into "struct gnet_stats_basic_sync". This eliminates redundancy and simplifies the bstats read/write APIs. Use u64_stats_t for bstats "packets" and "bytes" data types. On 64-bit architectures, u64_stats sync points do not use sequence counter protection. Signed-off-by:
-
Ahmed S. Darwish authored
The Qdisc::running sequence counter, used to protect Qdisc::bstats reads from parallel writes, is in the process of being removed. Qdisc::bstats read/writes will synchronize using an internal u64_stats sync point instead. Modify all bstats writes to use _bstats_update(). This ensures that the internal u64_stats sync point is always acquired and released as appropriate. Signed-off-by:
-
Ahmed S. Darwish authored
The not-per-CPU variant of qdisc tc (traffic control) statistics, Qdisc::gnet_stats_basic_packed bstats, is protected with Qdisc::running sequence counter. This sequence counter is used for reliably protecting bstats reads from parallel writes. Meanwhile, the seqcount's write section covers a much wider area than bstats update: qdisc_run_begin() => qdisc_run_end(). That read/write section asymmetry can lead to needless retries of the read section. To prepare for removing the Qdisc::running sequence counter altogether, introduce a u64_stats sync point inside bstats instead. Modify _bstats_update() to start/end the bstats u64_stats write section. For bisectability, and finer commits granularity, the bstats read section is still protected with a Qdisc::running read/retry loop and qdisc_run_begin/end() still starts/ends that seqcount write section. Once all call sites are modified to use _bstats_update(), the Qdisc::running seqcount will be removed and bstats read/retry loop will be modified to utilize the internal u64_stats sync point. Note, using u64_stats implies no sequence counter protection for 64-bit architectures. This can lead to the statistics "packets" vs. "bytes" values getting out of sync on rare occasions. The individual values will still be valid. [bigeasy: Minor commit message edits, init all gnet_stats_basic_packed.] Signed-off-by:
-
Ahmed S. Darwish authored
Allow to directly set a u64_stats_t value which is used to provide an init function which sets it directly to zero intead of memset() the value. Add u64_stats_set() to the u64_stats API. [bigeasy: commit message. ] Signed-off-by:
-
Sebastian Andrzej Siewior authored
The gnet_stats_queue::qlen member is only used in the SMP-case. qdisc_qstats_qlen_backlog() needs to add qdisc_qlen() to qstats.qlen to have the same value as that provided by qdisc_qlen_sum(). gnet_stats_copy_queue() needs to overwritte the resulting qstats.qlen field whith the caller submitted qlen value. It might be differ from the submitted value. Let both functions use gnet_stats_add_queue() and remove unused __gnet_stats_copy_queue(). Signed-off-by:
-
Sebastian Andrzej Siewior authored
gnet_stats_add_basic() and gnet_stats_add_queue() add up the statistics so they can be used directly for both the per-CPU and global case. gnet_stats_add_queue() copies either Qdisc's per-CPU gnet_stats_queue::qlen or the global member. The global gnet_stats_queue::qlen isn't touched in the per-CPU case so there is no need to consider it in the global-case. In the per-CPU case, the sum of global gnet_stats_queue::qlen and the per-CPU gnet_stats_queue::qlen was assigned to sch->q.qlen and sch->qstats.qlen. Now both fields are copied individually. Signed-off-by:
-
Sebastian Andrzej Siewior authored
This function will replace __gnet_stats_copy_queue(). It reads all arguments and adds them into the passed gnet_stats_queue argument. In contrast to __gnet_stats_copy_queue() it also copies the qlen member. Signed-off-by:
-
Sebastian Andrzej Siewior authored
__gnet_stats_copy_basic() always assigns the value to the bstats argument overwriting the previous value. The later added per-CPU version always accumulated the values in the returning gnet_stats_basic_packed argument. Based on review there are five users of that function as of today: - est_fetch_counters(), ___gnet_stats_copy_basic() memsets() bstats to zero, single invocation. - mq_dump(), mqprio_dump(), mqprio_dump_class_stats() memsets() bstats to zero, multiple invocation but does not use the function due to !qdisc_is_percpu_stats(). Add the values in __gnet_stats_copy_basic() instead overwriting. Rename the function to gnet_stats_add_basic() to make it more obvious. Signed-off-by:
-
- 16 Oct, 2021 21 commits
-
-
Kyungrok Chung authored
Make use of netdev helper functions to improve code readability. Replace 'dev->priv_flags & IFF_EBRIDGE' with netif_is_bridge_master(dev). Signed-off-by:
Kyungrok Chung <acadx0@gmail.com> Reviewed-by:
Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by:
-
David S. Miller authored
Karsten Graul says: ==================== net/smc: introduce SMC-Rv2 support Please apply the following patch series for smc to netdev's net-next tree. SMC-Rv2 support (see https://www.ibm.com/support/pages/node/6326337) provides routable RoCE support for SMC-R, eliminating the current same-subnet restriction, by exploiting the UDP encapsulation feature of the RoCE adapter hardware. v2: resend of the v1 patch series, and CC linux-rdma this time v3: rebase after net tree was merged into net-next ==================== Signed-off-by:
-
Karsten Graul authored
With SMC-Rv2 the GID is an IP address that can be deleted from the device. When an IB_EVENT_GID_CHANGE event is provided then iterate over all active links and check if their GID is still defined. Otherwise stop the affected link. Signed-off-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
-
Karsten Graul authored
Implement the netlink support for SMC-Rv2 related attributes that are provided to user space. Signed-off-by:
-
Karsten Graul authored
Add support for large v2 LLC control messages in smc_llc.c. The new large work request buffer allows to combine control messages into one packet that had to be spread over several packets before. Add handling of the new v2 LLC messages. Signed-off-by:
-
Karsten Graul authored
In the work request layer define one large v2 buffer for each link group that is used to transmit and receive large LLC control messages. Add the completion queue handling for this buffer. Signed-off-by:
-
Karsten Graul authored
In smc_ib.c, scan for RoCE devices that support UDP encapsulation. Find an eligible device and check that there is a route to the remote peer. Signed-off-by:
-
Karsten Graul authored
The CLC decline message changed with SMC-Rv2 and supports up to 4 additional diagnosis codes. Signed-off-by:
-
Karsten Graul authored
Implement the server side of the SMC-Rv2 processing. Process incoming CLC messages, find eligible devices and check for a valid route to the remote peer. Signed-off-by:
-
Karsten Graul authored
Send a CLC proposal message, and the remote side process this type of message and determine the target GID. Check for a valid route to this GID, and complete the connection establishment. Signed-off-by:
-
Karsten Graul authored
Prepare the connection establishment with SMC-Rv2. Detect eligible RoCE cards and indicate all supported SMC modes for the connection. Signed-off-by:
-
Karsten Graul authored
The struct smc_init_info grew over time, its time to save space on stack and allocate this struct dynamically. Signed-off-by:
-
Jakub Kicinski authored
sk_stream_kill_queues() can be called on close when there are still outstanding skbs to transmit. Those skbs may try to queue notifications to the error queue (e.g. timestamps). If sk_stream_kill_queues() purges the queue without taking its lock the queue may get corrupted, and skbs leaked. This shows up as a warning about an rmem leak: WARNING: CPU: 24 PID: 0 at net/ipv4/af_inet.c:154 inet_sock_destruct+0x... The leak is always a multiple of 0x300 bytes (the value is in %rax on my builds, so RAX: 0000000000000300). 0x300 is truesize of an empty sk_buff. Indeed if we dump the socket state at the time of the warning the sk_error_queue is often (but not always) corrupted. The ->next pointer points back at the list head, but not the ->prev pointer. Indeed we can find the leaked skb by scanning the kernel memory for something that looks like an skb with ->sk = socket in question, and ->truesize = 0x300. The contents of ->cb[] of the skb confirms the suspicion that it is indeed a timestamp notification (as generated in __skb_complete_tx_timestamp()). Removing purging of sk_error_queue should be okay, since inet_sock_destruct() does it again once all socket refs are gone. Eric suggests this may cause sockets that go thru disconnect() to maintain notifications from the previous incarnations of the socket, but that should be okay since the race was there anyway, and disconnect() is not exactly dependable. Thanks to Jonathan Lemon and Omar Sandoval for help at various stages of tracing the issue. Fixes: cb9eff09 ("net: new user space API for time stamping of incoming and outgoing packets") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
David S. Miller authored
Jakub Kicinski says: ==================== ethernet: manual netdev->dev_addr conversions (part 1) Manual conversions of drivers writing directly to netdev->dev_addr (part 1 out of 3). ==================== Signed-off-by: -
Jakub Kicinski authored
Commit 406f42fa ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Read the address into an array on the stack, then call eth_hw_addr_set(). ixgb_get_ee_mac_addr() is used with a non-nevdev->dev_addr pointer so we can't deal with the problem inside it. Signed-off-by:
-
Jakub Kicinski authored
We'll want to make netdev->dev_addr const, remove the local helper which is missing a const qualifier on the argument and use ether_addr_to_u64(). Similar story to mlx4. Signed-off-by:
Tyrel Datwyler <tyreld@linux.ibm.com> Signed-off-by:
-
Jakub Kicinski authored
Commit 406f42fa ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Pass a netdev into the helper instead of just the address, read the address into an array on the stack, then call eth_hw_addr_set(). Signed-off-by:
-
Jakub Kicinski authored
Commit 406f42fa ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Copy the address into an array on the stack, then call eth_hw_addr_set(). Signed-off-by:
-
Jakub Kicinski authored
Commit 406f42fa ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Use a zero'ed array on the stack, then call eth_hw_addr_set(). Signed-off-by:
-
Jakub Kicinski authored
Commit 406f42fa ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Read the address into an array on the stack, then call eth_hw_addr_set(). Signed-off-by:
-
Jakub Kicinski authored
Commit 406f42fa ("net-next: When a bond have a massive amount of VLANs...") introduced a rbtree for faster Ethernet address look up. To maintain netdev->dev_addr in this tree we need to make all the writes to it got through appropriate helpers. Read the address into an array on the stack, then call eth_hw_addr_set(). Signed-off-by:
-
