As long as the descriptor fits on a single cacheline, the change
should be almost free.

Now ring_info is not used at all. Remove it.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>

Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>

1) pci_set_drvdata() is used in cp_{init/remove}_one to initialize/reset
   driver_data to the relevant value (resp. net_device * and NULL).

2) each of the 3 relevant functions is issued under (device *)->sem:
   2.1) pci_unregister_driver
        -> driver_unregister
           -> bus_remove_driver
              -> driver_detach (takes (device *)->sem)
                 -> __device_release_driver(dev)
                    -> dev->bus-remove(dev) (== pci_device_remove)
                       -> drv->remove(pdev) (== cp_remove_one)
                       [...]
                       pci_dev->driver = NULL;

   2.2) pci_register_driver
        -> __pci_register_driver
           -> driver_register
              -> bus_add_driver
                 -> driver_attach
                    -> __driver_attach (takes (device *)->sem)
                       -> driver_probe_device(drv, dev)
                          -> dev->bus->probe(dev) (== pci_device_probe)
                             -> _pci_device_probe(drv, pci_dev)
                                -> pci_call_probe(drv, pci_dev, id)
                                   -> drv->probe(dev, id) (== cp_init_one)
                                [...]
                                pci_dev->driver = drv;

   2.3) suspend_device (takes (device *)->sem)
        -> dev->bus->suspend(dev) (== pci_device_suspend)
           checking for drv = pci_dev->driver != NULL
           [...]
           -> drv->suspend(pci_dev, state) (== cp_suspend)

dev->sem and the state of pci_dev->driver provide the expected result.

St Mary's day was a bit rainy here.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>

netdev_priv() will provide a nice oops a few lines before
the BUG_ON() check.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>

struct cp_private is reorganized to be more easily compared between the
r8169 and the 8139cp drivers.

The alignment should not be impacted.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>

The ring_info.len field is not used at all. cp_private.rx_skb is
turned into an array of sk_buff *.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>

dev is an argument of the current function.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>

Fat removal: the mapping address is available from the Rx/Tx descriptors.
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] Do not send Query All EAs SMB when mount option nouser_xattr
  [CIFS] endian errors in lanman protocol support
  [CIFS] Fix oops in cifs_close due to unitialized lock sem and list in
  [CIFS] Fix oops when negotiating lanman and no password specified
  [CIFS]
  [CIFS] Allow cifsd to suspend if connection is lost
  [CIFS] Make midState usage more consistent
  [CIFS] spinlock protect read of last srv response time in timeout path
  [CIFS] Do not time out posix brl requests when using new posix setfileinfo

* master.kernel.org:/home/rmk/linux-2.6-serial:
  [SERIAL] Support for Intashield 2 port PCI serial card

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 3761/1: fix armv4t breakage after adding thumb interworking to userspace helpers
  [ARM] Add Integrator support for glibc outb() and friends
  [ARM] Move prototype for register_isa_ports to asm/io.h
  [ARM] Arrange for isa.c to use named initialisers
  [ARM] 3741/1: remove sa1111.c build warning on non-sa1100 systems
  [ARM] 3760/1: This patch adds timeouts while working with SSP registers. Such timeouts were en
  [ARM] 3758/1: Preserve signalling NaNs in conversion
  [ARM] 3749/3: Correct VFP single/double conversion emulation
  [ARM] 3748/3: Correct error check in vfp_raise_exceptions

Patch from Lennert Buytenhek

On armv4t systems, we have always compiled the kernel with -march=armv4
instead of -march=armv4t, which means that any use of bx will bomb out.

Commit ba9b5d76 introduced the use of
bx in the kernel, which means we need to compile with -march=armv4t on
armv4t systems now.
Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Add the necessary call to register_isa_ports() so that glibc knows
where these are found on Integrator platforms.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Convert isa.c (the glibc interface for emulating ISA IO) to use
named initialisers.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Unlike the other tty comment patch this one has code changes.  Specifically
it limits the queue size for a tty to 64K characters (128Kbytes) worst case
even if the tty is ignoring tty->throttle.  This is because certain drivers
don't honour the throttle value correctly, although it is a useful
safeguard anyway.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Doesn't fix them but does show up some interesting areas that need review
and fixing.
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fix printk format warning:
drivers/cdrom/gscd.c:269: warning: format ‘%lu’ expects type ‘long unsigned int’, but argument 2 has type ‘unsigned int’
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: Jens Axboe <axboe@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

When we select NUMA with i386, the system is only X86_NUMAQ or using ACPI.
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

None of the other /proc/meminfo lines have a space in the identifier.  This
post-2.6.17 addition has the potential to break existing parsers, so use an
underscore instead (like Committed_AS).

Cc: Christoph Lameter <clameter@engr.sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This fixes the locking error noticed by lockdep:

  =============================================
  [ INFO: possible recursive locking detected ]
  ---------------------------------------------
  init/1 is trying to acquire lock:
   (&sighand->siglock){....}, at: [<c047a78a>] flush_old_exec+0x3ae/0x859

  but task is already holding lock:
   (&sighand->siglock){....}, at: [<c047a77a>] flush_old_exec+0x39e/0x859

  other info that might help us debug this:
  2 locks held by init/1:
   #0:  (tasklist_lock){..--}, at: [<c047a76a>] flush_old_exec+0x38e/0x859
   #1:  (&sighand->siglock){....}, at: [<c047a77a>] flush_old_exec+0x39e/0x859

  stack backtrace:
   [<c04051e1>] show_trace_log_lvl+0x54/0xfd
   [<c040579d>] show_trace+0xd/0x10
   [<c04058b6>] dump_stack+0x19/0x1b
   [<c043b33a>] __lock_acquire+0x773/0x997
   [<c043bacf>] lock_acquire+0x4b/0x6c
   [<c060630b>] _spin_lock+0x19/0x28
   [<c047a78a>] flush_old_exec+0x3ae/0x859
   [<c0498053>] load_elf_binary+0x4aa/0x1628
   [<c0479cab>] search_binary_handler+0xa7/0x24e
   [<c047b577>] do_execve+0x15b/0x1f9
   [<c04022b4>] sys_execve+0x29/0x4d
   [<c0403faf>] syscall_call+0x7/0xb
Signed-off-by: Arjan van de Ven <arjan@infradead.org>
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

reiserfs seems to have another locking level layer for the i_mutex due to the
xattrs-are-a-directory thing.
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

idescsi_pc_intr() uses local_irq_enable() in IRQ context: annotate it.

(this has no effect on kernels with lockdep disabled.  On kernels with lockdep
enabled this means that we wont actually disable interrupts, and the warning
message will go away as well.)
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

  In file included from include/asm/mmzone.h:18,
                   from include/linux/mmzone.h:439,
  <snip>
  include/asm/srat.h:31:2: error: #error CONFIG_ACPI_SRAT not defined, and srat.h header has been included
  make[1]: *** [arch/i386/kernel/asm-offsets.s] Error 1

This can happen with CONFIG_NUMA && !CONFIG_ACPI && !CONFIG_X86_NUMAQ
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

cpuset_excl_nodes_overlap always returns 0 if current is exiting.  This caused
customer's systems to panic in the OOM killer when processes were having
trouble getting memory for the final put_user in mm_release.  Even though
there were lots of processes to kill.

Change to returning 1 in this case.  This achieves parity with !CONFIG_CPUSETS
case, and was observed to fix the problem.
Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Paul Jackson <pj@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

register_one_node()'s should be defined under CONFIG_NUMA=n.
fixes following bug.

  CC	  init/version.o
  LD	  init/built-in.o
  LD	  .tmp_vmlinux1
  mm/built-in.o: In function `add_memory': undefined reference to `register_one_node'
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

JBD currently allocates commit and frozen buffers from slabs.  With
CONFIG_SLAB_DEBUG, its possible for an allocation to cross the page
boundary causing IO problems.

https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=200127

So, instead of allocating these from regular slabs - manage allocation from
its own slabs and disable slab debug for these slabs.

[akpm@osdl.org: cleanups]
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Change the list of cpus allowed to tasks in the top (root) cpuset to
dynamically track what cpus are online, using a CPU hotplug notifier.  Make
this top cpus file read-only.

On systems that have cpusets configured in their kernel, but that aren't
actively using cpusets (for some distros, this covers the majority of
systems) all tasks end up in the top cpuset.

If that system does support CPU hotplug, then these tasks cannot make use
of CPUs that are added after system boot, because the CPUs are not allowed
in the top cpuset.  This is a surprising regression over earlier kernels
that didn't have cpusets enabled.

In order to keep the behaviour of cpusets consistent between systems
actively making use of them and systems not using them, this patch changes
the behaviour of the 'cpus' file in the top (root) cpuset, making it read
only, and making it automatically track the value of cpu_online_map.  Thus
tasks in the top cpuset will have automatic use of hot plugged CPUs allowed
by their cpuset.

Thanks to Anton Blanchard and Nathan Lynch for reporting this problem,
driving the fix, and earlier versions of this patch.
Signed-off-by: Paul Jackson <pj@sgi.com>
Cc: Nathan Lynch <ntl@pobox.com>
Cc: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

A recent patch broke the ability to do a user-request check of a raid1.
This patch fixes the breakage and also moves a comment that was dislocated
by the same patch.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

If we
  - shut down a clean array,
  - restart with one (or more) drive(s) missing
  - make some changes
  - pause, so that they array gets marked 'clean',
the event count on the superblock of included drives
will be the same as that of the removed drives.
So adding the removed drive back in will cause it
to be included with no resync.

To avoid this, we only update the eventcount backwards when the array
is not degraded.  In this case there can (should) be no non-connected
drives that we can get confused with, and this is the particular case
where updating-backwards is valuable.
Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fix two compile failures in eventpoll.c code which would happen if
DEBUG_EPOLL is bigger than zero.
Signed-off-by: Masoud Sharbiani <masouds@google.com>
Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Here's updated documentation for the relay interface, rewritten to match
the relayfs->relay changes.  It also moves relayfs.txt to relay.txt in the
process.

It includes the changes to relayfs.txt previously posted by Randy Dunlap,
thanks for those.

The relay-apps examples have also been updated to match, and can be found
on the sourceforge relayfs website.
Signed-off-by: Tom Zanussi <zanussi@us.ibm.com>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

An up() is called in kernel/stop_machine.c on failure, and also in the
caller (unconditionally).
Signed-off-by: Zhou Yingchao <yingchao.zhou@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1) When we allocated last fragment in ufs_truncate, we read page, check
   if block mapped to address, and if not trying to allocate it.  This is
   wrong behaviour, fragment may be NOT allocated, but mapped, this
   happened because of "block map" function not checked allocated fragment
   or not, it just take address of the first fragment in the block, add
   offset of fragment and return result, this is correct behaviour in
   almost all situation except call from ufs_truncate.

2) Almost all implementation of UFS, which I can investigate have such
   "defect": if you have full disk, and try truncate file, for example 3GB
   to 2MB, and have hole in this region, truncate return -ENOSPC.  I tried
   evade from this problem, but "block allocation" algorithm is tied to
   right value of i_lastfrag, and fix of this corner case may slow down of
   ordinaries scenarios, so this patch makes behavior of "truncate"
   operations similar to what other UFS implementations do.
Signed-off-by: Evgeniy Dushistov <dushistov@mail.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

On UFS, this scenario:
	open(O_TRUNC)
	lseek(1024 * 1024 * 80)
	write("A")
	lseek(1024 * 2)
	write("A")

may cause access to invalid address.

This happened because of "goal" is calculated in wrong way in block
allocation path, as I see this problem exists also in 2.4.

We use construction like this i_data[lastfrag], i_data array of pointers to
direct blocks, indirect and so on, it has ceratain size ~20 elements, and
lastfrag may have value for example 40000.

Also this patch fixes related to handling such scenario issues, wrong
zeroing metadata, in case of block(not fragment) allocation, and wrong goal
calculation, when we allocate block
Signed-off-by: Evgeniy Dushistov <dushistov@mail.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

To handle the earlier bogus ENOSPC error caused by filesystem full of block
reservation, current code falls back to non block reservation, starts to
allocate block(s) from the goal allocation block group as if there is no
block reservation.

Current code needs to re-load the corresponding block group descriptor for
the initial goal block group in this case.  The patch fixes this.
Signed-off-by: Mingming Cao <cmm@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Mounting an ext2 filesystem with zero s_inodes_per_group will cause a
divide error.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Mounting a (corrupt) minix filesystem with zero s_zmap_blocks
gives a spectacular crash on my 2.6.17.8 system, no doubt
because minix/inode.c does an unconditional
	minix_set_bit(0,sbi->s_zmap[0]->b_data);

[akpm@osdl.org: make labels conistent while we're there]
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The recent hwctrl core conversion for MTD NAND devices broke the Amstrad
Delta driver.  This fixes it up and uses the existing control line defines
rather than unclear magic numbers.
Signed-off-by: Jonathan McDowell <noodles@earth.li>
Acked-by: David Woodhouse <dwmw2@infradead.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>