Up till now the code to start HSR announce timer, which triggers sending
supervisory frames, was assuming that hsr_netdev_notify() would be called
at least twice for hsrX interface. This was required to have different
values for old and current values of network device's operstate.

This is problematic for a case where hsrX interface is already in the
operational state when hsr_netdev_notify() is called, so timer is not
configured to trigger and as a result the hsrX is not sending supervisory
frames to HSR ring.

This error has been discovered when hsr_ping.sh script was run. To be
more specific - for the hsr1 and hsr2 the hsr_netdev_notify() was
called at least twice with different IF_OPER_{LOWERDOWN|DOWN|UP} states
assigned in hsr_check_carrier_and_operstate(hsr). As a result there was
no issue with sending supervisory frames.
However, with hsr3, the notify function was called only once with
operstate set to IF_OPER_UP and timer responsible for triggering
supervisory frames was not fired.

The solution is to use netif_oper_up() and netif_running() helper
functions to assess if network hsrX device is up.
Only then, when the timer is not already pending, it is started.
Otherwise it is deactivated.

Fixes: f421436a ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)")
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240507111214.3519800-1-lukma@denx.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

syzbot is able to trigger the following crash [1],
caused by unsafe ip6_dst_idev() use.

Indeed ip6_dst_idev() can return NULL, and must always be checked.

[1]

Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 0 PID: 31648 Comm: syz-executor.0 Not tainted 6.9.0-rc4-next-20240417-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
 RIP: 0010:__fib6_rule_action net/ipv6/fib6_rules.c:237 [inline]
 RIP: 0010:fib6_rule_action+0x241/0x7b0 net/ipv6/fib6_rules.c:267
Code: 02 00 00 49 8d 9f d8 00 00 00 48 89 d8 48 c1 e8 03 42 80 3c 20 00 74 08 48 89 df e8 f9 32 bf f7 48 8b 1b 48 89 d8 48 c1 e8 03 <42> 80 3c 20 00 74 08 48 89 df e8 e0 32 bf f7 4c 8b 03 48 89 ef 4c
RSP: 0018:ffffc9000fc1f2f0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 1a772f98c8186700
RDX: 0000000000000003 RSI: ffffffff8bcac4e0 RDI: ffffffff8c1f9760
RBP: ffff8880673fb980 R08: ffffffff8fac15ef R09: 1ffffffff1f582bd
R10: dffffc0000000000 R11: fffffbfff1f582be R12: dffffc0000000000
R13: 0000000000000080 R14: ffff888076509000 R15: ffff88807a029a00
FS:  00007f55e82ca6c0(0000) GS:ffff8880b9400000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b31d23000 CR3: 0000000022b66000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
  fib_rules_lookup+0x62c/0xdb0 net/core/fib_rules.c:317
  fib6_rule_lookup+0x1fd/0x790 net/ipv6/fib6_rules.c:108
  ip6_route_output_flags_noref net/ipv6/route.c:2637 [inline]
  ip6_route_output_flags+0x38e/0x610 net/ipv6/route.c:2649
  ip6_route_output include/net/ip6_route.h:93 [inline]
  ip6_dst_lookup_tail+0x189/0x11a0 net/ipv6/ip6_output.c:1120
  ip6_dst_lookup_flow+0xb9/0x180 net/ipv6/ip6_output.c:1250
  sctp_v6_get_dst+0x792/0x1e20 net/sctp/ipv6.c:326
  sctp_transport_route+0x12c/0x2e0 net/sctp/transport.c:455
  sctp_assoc_add_peer+0x614/0x15c0 net/sctp/associola.c:662
  sctp_connect_new_asoc+0x31d/0x6c0 net/sctp/socket.c:1099
  __sctp_connect+0x66d/0xe30 net/sctp/socket.c:1197
  sctp_connect net/sctp/socket.c:4819 [inline]
  sctp_inet_connect+0x149/0x1f0 net/sctp/socket.c:4834
  __sys_connect_file net/socket.c:2048 [inline]
  __sys_connect+0x2df/0x310 net/socket.c:2065
  __do_sys_connect net/socket.c:2075 [inline]
  __se_sys_connect net/socket.c:2072 [inline]
  __x64_sys_connect+0x7a/0x90 net/socket.c:2072
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x77/0x7f

Fixes: 5e5f3f0f ("[IPV6] ADDRCONF: Convert ipv6_get_saddr() to ipv6_dev_get_saddr().")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240507163145.835254-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Several clocks as well as both sgmiisys phandles were added by mistake
to the Ethernet bindings for MT7988. Also, the total number of clocks
didn't match with the actual number of items listed.

This happened because the vendor driver which served as a reference uses
a high number of syscon phandles to access various parts of the SoC
which wasn't acceptable upstream. Hence several parts which have never
previously been supported (such SerDes PHY and USXGMII PCS) are going to
be implemented by separate drivers. As a result the device tree will
look much more sane.

Quickly align the bindings with the upcoming reality of the drivers
actually adding support for the remaining Ethernet-related features of
the MT7988 SoC.

Fixes: c94a9aab ("dt-bindings: net: mediatek,net: add mt7988-eth binding")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/1569290b21cc787a424469ed74456a7e976b102d.1715084326.git.daniel@makrotopia.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

David Howells says:

====================
rxrpc: Miscellaneous fixes (part)

Here some miscellaneous fixes for AF_RXRPC:

 (1) Fix the congestion control algorithm to start cwnd at 4 and to not cut
     ssthresh when the peer cuts its rwind size.

 (2) Only transmit a single ACK for all the DATA packets glued together
     into a jumbo packet to reduce the number of ACKs being generated.
====================

Link: https://lore.kernel.org/r/20240503150749.1001323-1-dhowells@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Only generate one ACK packet for all the subpackets in a jumbo packet.  If
we would like to generate more than one ACK, we prioritise them base on
their reason code, in the order, highest first:

   OutOfSeq > NoSpace > ExceedsWin > Duplicate > Requested > Delay > Idle

For the first four, we reference the lowest offending subpacket; for the
last three, the highest.

This reduces the number of ACKs we end up transmitting to one per UDP
packet transmitted to reduce network loading and packet parsing.

Fixes: 5d7edbc9 ("rxrpc: Get rid of the Rx ring")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Reviewed-by: Jeffrey Altman &lt;jaltman@auristor.com <mailto:jaltman@auristor.com&gt;>
Link: https://lore.kernel.org/r/20240503150749.1001323-3-dhowells@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Make the following fixes to the congestion control algorithm:

 (1) Don't vary the cwnd starting value by the size of RXRPC_TX_SMSS since
     that's currently held constant - set to the size of a jumbo subpacket
     payload so that we can create jumbo packets on the fly.  The current
     code invariably picks 3 as the starting value.

     Further, the starting cwnd needs to be an even number because we ack
     every other packet, so set it to 4.

 (2) Don't cut ssthresh when we see an ACK come from the peer with a
     receive window (rwind) less than ssthresh.  ssthresh keeps track of
     characteristics of the connection whereas rwind may be reduced by the
     peer for any reason - and may be reduced to 0.

Fixes: 1fc4fa2a ("rxrpc: Fix congestion management")
Fixes: 08511150 ("rxrpc: Reduce ssthresh to peer's receive window")
Signed-off-by: David Howells <dhowells@redhat.com>
Suggested-by: Simon Wilkinson <sxw@auristor.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Reviewed-by: Jeffrey Altman &lt;jaltman@auristor.com <mailto:jaltman@auristor.com&gt;>
Link: https://lore.kernel.org/r/20240503150749.1001323-2-dhowells@redhat.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When creating the topology for the test, three veth pairs are created in
the initial network namespace before being moved to one of the network
namespaces created by the test.

On systems where systemd-udev uses MACAddressPolicy=persistent (default
since systemd version 242), this will result in some net devices having
the same MAC address since they were created with the same name in the
initial network namespace. In turn, this leads to arping / ndisc6
failing since packets are dropped by the bridge's loopback filter.

Fix by creating each net device in the correct network namespace instead
of moving it there from the initial network namespace.
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20240426074015.251854d4@kernel.org/
Fixes: 7648ac72 ("selftests: net: Add bridge neighbor suppression test")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20240507113033.1732534-1-idosch@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

As it was done in commit fc1092f5 ("ipv4: Fix uninit-value access in
__ip_make_skb()") for IPv4, check FLOWI_FLAG_KNOWN_NH on fl6->flowi6_flags
instead of testing HDRINCL on the socket to avoid a race condition which
causes uninit-value access.

Fixes: ea30388b ("ipv6: Fix an uninit variable access bug in __ip6_make_skb()")
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Different revisions of the Marvell 88q2xxx phy needs different init
sequences.

Add init sequence for Rev B1 and Rev B2. Rev B2 init sequence skips one
register write.
Tested-by: Dimitri Fedrau <dima.fedrau@gmail.com>
Signed-off-by: Gregor Herburger <gregor.herburger@ew.tq-group.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a broadcast AppleTalk packet is received, prefer queuing it on the
socket whose address matches the address of the interface that received
the packet (and is listening on the correct port). Userspace
applications that handle such packets will usually send a response on
the same socket that received the packet; this fix allows the response
to be sent on the correct interface.

If a socket matching the interface's address is not found, an arbitrary
socket listening on the correct port will be used, if any. This matches
the implementation's previous behavior.

Fixes atalkd's responses to network information requests when multiple
network interfaces are configured to use AppleTalk.

Link: https://lore.kernel.org/netdev/20200722113752.1218-2-vincent.ldev@duvert.net/
Link: https://gist.github.com/VinDuv/4db433b6dce39d51a5b7847ee749b2a4Signed-off-by: Vincent Duvert <vincent.ldev@duvert.net>
Signed-off-by: Doug Brown <doug@schmorgal.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The change from skb_copy to pskb_copy unfortunately changed the data
copying to omit the ethernet header, since it was pulled before reaching
this point. Fix this by calling __skb_push/pull around pskb_copy.

Fixes: 59c878cb ("net: bridge: fix multicast-to-unicast with fraglist GSO")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The current behavior is to accept any strings as inputs, this results in
an inconsistent result where an unexisting scheduler can be set:

  # sysctl -w net.mptcp.scheduler=notdefault
  net.mptcp.scheduler = notdefault

This patch changes this behavior by checking for existing scheduler
before accepting the input.

Fixes: e3b2870b ("mptcp: add a new sysctl scheduler")
Cc: stable@vger.kernel.org
Signed-off-by: Gregory Detal <gregory.detal@gmail.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Tested-by: Geliang Tang <geliang@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240506-upstream-net-20240506-mptcp-sched-exist-v1-1-2ed1529e521e@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Commit 7e8cdc97 ("nfc: Add KCOV annotations") added
kcov_remote_start_common()/kcov_remote_stop() pair into nci_rx_work(),
with an assumption that kcov_remote_stop() is called upon continue of
the for loop. But commit d24b0353 ("nfc: nci: Fix uninit-value in
nci_dev_up and nci_ntf_packet") forgot to call kcov_remote_stop() before
break of the for loop.
Reported-by: syzbot <syzbot+0438378d6f157baae1a2@syzkaller.appspotmail.com>
Closes: https://syzkaller.appspot.com/bug?extid=0438378d6f157baae1a2
Fixes: d24b0353 ("nfc: nci: Fix uninit-value in nci_dev_up and nci_ntf_packet")
Suggested-by: Andrey Konovalov <andreyknvl@gmail.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/6d10f829-5a0c-405a-b39a-d7266f3a1a0b@I-love.SAKURA.ne.jpSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Attributes for FDB learned entries were added to the if_link netlink api
for bridge linkinfo but are missing from the rt_link.yaml spec. Add the
missing attributes to the spec.

Fixes: ddd1ad68 ("net: bridge: Add netlink knobs for number / max learned FDB entries")
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240503164304.87427-1-donald.hunter@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

fill_route() stores three components in the skb:

- struct rtmsg
- RTA_DST (u8)
- RTA_OIF (u32)

Therefore, rtm_phonet_notify() should use

NLMSG_ALIGN(sizeof(struct rtmsg)) +
nla_total_size(1) +
nla_total_size(4)

Fixes: f062f41d ("Phonet: routing table Netlink interface")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Rémi Denis-Courmont <courmisch@gmail.com>
Link: https://lore.kernel.org/r/20240502161700.1804476-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

net_alloc_generic is called by net_alloc, which is called without any
locking. It reads max_gen_ptrs, which is changed under pernet_ops_rwsem. It
is read twice, first to allocate an array, then to set s.len, which is
later used to limit the bounds of the array access.

It is possible that the array is allocated and another thread is
registering a new pernet ops, increments max_gen_ptrs, which is then used
to set s.len with a larger than allocated length for the variable array.

Fix it by reading max_gen_ptrs only once in net_alloc_generic. If
max_gen_ptrs is later incremented, it will be caught in net_assign_generic.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@igalia.com>
Fixes: 073862ba ("netns: fix net_alloc_generic()")
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240502132006.3430840-1-cascardo@igalia.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Add myself(Bharat) as maintainer for cxgb4 and cxgb3 network drivers.
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Link: https://lore.kernel.org/r/20240502184209.2723379-1-bharat@chelsio.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Each attribute inside a nested IFLA_VF_VLAN_LIST is assumed to be a
struct ifla_vf_vlan_info so the size of such attribute needs to be at least
of sizeof(struct ifla_vf_vlan_info) which is 14 bytes.
The current size validation in do_setvfinfo is against NLA_HDRLEN (4 bytes)
which is less than sizeof(struct ifla_vf_vlan_info) so this validation
is not enough and a too small attribute might be cast to a
struct ifla_vf_vlan_info, this might result in an out of bands
read access when accessing the saved (casted) entry in ivvl.

Fixes: 79aab093 ("net: Update API for VF vlan protocol 802.1ad support")
Signed-off-by: Roded Zats <rzats@paloaltonetworks.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240502155751.75705-1-rzats@paloaltonetworks.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Steffen Klassert says:

====================
pull request (net): ipsec 2024-05-02

1) Fix an error pointer dereference in xfrm_in_fwd_icmp.
   From Antony Antony.

2) Preserve vlan tags for ESP transport mode software GRO.
   From Paul Davey.

3) Fix a spelling mistake in an uapi xfrm.h comment.
   From Anotny Antony.

* tag 'ipsec-2024-05-02' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
  xfrm: Correct spelling mistake in xfrm.h comment
  xfrm: Preserve vlan tags for transport mode software GRO
  xfrm: fix possible derferencing in error path
====================

Link: https://lore.kernel.org/r/20240502084838.2269355-1-steffen.klassert@secunet.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Luiz Augusto von Dentz says:

====================
bluetooth pull request for net:

 - mediatek: mt8183-pico6: Fix bluetooth node
 - sco: Fix use-after-free bugs caused by sco_sock_timeout
 - l2cap: fix null-ptr-deref in l2cap_chan_timeout
 - qca: Various fixes
 - l2cap: Fix slab-use-after-free in l2cap_connect()
 - msft: fix slab-use-after-free in msft_do_close()
 - HCI: Fix potential null-ptr-deref

* tag 'for-net-2024-05-03' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
  Bluetooth: qca: fix firmware check error path
  Bluetooth: l2cap: fix null-ptr-deref in l2cap_chan_timeout
  Bluetooth: HCI: Fix potential null-ptr-deref
  arm64: dts: mediatek: mt8183-pico6: Fix bluetooth node
  Bluetooth: qca: fix info leak when fetching board id
  Bluetooth: qca: fix info leak when fetching fw build id
  Bluetooth: qca: generalise device address check
  Bluetooth: qca: fix NVM configuration parsing
  Bluetooth: qca: add missing firmware sanity checks
  Bluetooth: msft: fix slab-use-after-free in msft_do_close()
  Bluetooth: L2CAP: Fix slab-use-after-free in l2cap_connect()
  Bluetooth: qca: fix wcn3991 device address check
  Bluetooth: Fix use-after-free bugs caused by sco_sock_timeout
====================

Link: https://lore.kernel.org/r/20240503171933.3851244-1-luiz.dentz@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Currently the driver uses local_bh_disable()/local_bh_enable() in its
IRQ handler to avoid triggering net_rx_action() softirq on exit from
netif_rx(). The net_rx_action() could trigger this driver .start_xmit
callback, which is protected by the same lock as the IRQ handler, so
calling the .start_xmit from netif_rx() from the IRQ handler critical
section protected by the lock could lead to an attempt to claim the
already claimed lock, and a hang.

The local_bh_disable()/local_bh_enable() approach works only in case
the IRQ handler is protected by a spinlock, but does not work if the
IRQ handler is protected by mutex, i.e. this works for KS8851 with
Parallel bus interface, but not for KS8851 with SPI bus interface.

Remove the BH manipulation and instead of calling netif_rx() inside
the IRQ handler code protected by the lock, queue all the received
SKBs in the IRQ handler into a queue first, and once the IRQ handler
exits the critical section protected by the lock, dequeue all the
queued SKBs and push them all into netif_rx(). At this point, it is
safe to trigger the net_rx_action() softirq, since the netif_rx()
call is outside of the lock that protects the IRQ handler.

Fixes: be0384bf ("net: ks8851: Handle softirqs at the end of IRQ thread to fix hang")
Tested-by: Ronald Wahl <ronald.wahl@raritan.com> # KS8851 SPI
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240502183436.117117-1-marex@denx.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

A recent commit fixed the code that parses the firmware files before
downloading them to the controller but introduced a memory leak in case
the sanity checks ever fail.

Make sure to free the firmware buffer before returning on errors.

Fixes: f905ae0be4b7 ("Bluetooth: qca: add missing firmware sanity checks")
Cc: stable@vger.kernel.org      # 4.19
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

There is a race condition between l2cap_chan_timeout() and
l2cap_chan_del(). When we use l2cap_chan_del() to delete the
channel, the chan->conn will be set to null. But the conn could
be dereferenced again in the mutex_lock() of l2cap_chan_timeout().
As a result the null pointer dereference bug will happen. The
KASAN report triggered by POC is shown below:

[  472.074580] ==================================================================
[  472.075284] BUG: KASAN: null-ptr-deref in mutex_lock+0x68/0xc0
[  472.075308] Write of size 8 at addr 0000000000000158 by task kworker/0:0/7
[  472.075308]
[  472.075308] CPU: 0 PID: 7 Comm: kworker/0:0 Not tainted 6.9.0-rc5-00356-g78c0094a146b #36
[  472.075308] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu4
[  472.075308] Workqueue: events l2cap_chan_timeout
[  472.075308] Call Trace:
[  472.075308]  <TASK>
[  472.075308]  dump_stack_lvl+0x137/0x1a0
[  472.075308]  print_report+0x101/0x250
[  472.075308]  ? __virt_addr_valid+0x77/0x160
[  472.075308]  ? mutex_lock+0x68/0xc0
[  472.075308]  kasan_report+0x139/0x170
[  472.075308]  ? mutex_lock+0x68/0xc0
[  472.075308]  kasan_check_range+0x2c3/0x2e0
[  472.075308]  mutex_lock+0x68/0xc0
[  472.075308]  l2cap_chan_timeout+0x181/0x300
[  472.075308]  process_one_work+0x5d2/0xe00
[  472.075308]  worker_thread+0xe1d/0x1660
[  472.075308]  ? pr_cont_work+0x5e0/0x5e0
[  472.075308]  kthread+0x2b7/0x350
[  472.075308]  ? pr_cont_work+0x5e0/0x5e0
[  472.075308]  ? kthread_blkcg+0xd0/0xd0
[  472.075308]  ret_from_fork+0x4d/0x80
[  472.075308]  ? kthread_blkcg+0xd0/0xd0
[  472.075308]  ret_from_fork_asm+0x11/0x20
[  472.075308]  </TASK>
[  472.075308] ==================================================================
[  472.094860] Disabling lock debugging due to kernel taint
[  472.096136] BUG: kernel NULL pointer dereference, address: 0000000000000158
[  472.096136] #PF: supervisor write access in kernel mode
[  472.096136] #PF: error_code(0x0002) - not-present page
[  472.096136] PGD 0 P4D 0
[  472.096136] Oops: 0002 [#1] PREEMPT SMP KASAN NOPTI
[  472.096136] CPU: 0 PID: 7 Comm: kworker/0:0 Tainted: G    B              6.9.0-rc5-00356-g78c0094a146b #36
[  472.096136] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu4
[  472.096136] Workqueue: events l2cap_chan_timeout
[  472.096136] RIP: 0010:mutex_lock+0x88/0xc0
[  472.096136] Code: be 08 00 00 00 e8 f8 23 1f fd 4c 89 f7 be 08 00 00 00 e8 eb 23 1f fd 42 80 3c 23 00 74 08 48 88
[  472.096136] RSP: 0018:ffff88800744fc78 EFLAGS: 00000246
[  472.096136] RAX: 0000000000000000 RBX: 1ffff11000e89f8f RCX: ffffffff8457c865
[  472.096136] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88800744fc78
[  472.096136] RBP: 0000000000000158 R08: ffff88800744fc7f R09: 1ffff11000e89f8f
[  472.096136] R10: dffffc0000000000 R11: ffffed1000e89f90 R12: dffffc0000000000
[  472.096136] R13: 0000000000000158 R14: ffff88800744fc78 R15: ffff888007405a00
[  472.096136] FS:  0000000000000000(0000) GS:ffff88806d200000(0000) knlGS:0000000000000000
[  472.096136] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  472.096136] CR2: 0000000000000158 CR3: 000000000da32000 CR4: 00000000000006f0
[  472.096136] Call Trace:
[  472.096136]  <TASK>
[  472.096136]  ? __die_body+0x8d/0xe0
[  472.096136]  ? page_fault_oops+0x6b8/0x9a0
[  472.096136]  ? kernelmode_fixup_or_oops+0x20c/0x2a0
[  472.096136]  ? do_user_addr_fault+0x1027/0x1340
[  472.096136]  ? _printk+0x7a/0xa0
[  472.096136]  ? mutex_lock+0x68/0xc0
[  472.096136]  ? add_taint+0x42/0xd0
[  472.096136]  ? exc_page_fault+0x6a/0x1b0
[  472.096136]  ? asm_exc_page_fault+0x26/0x30
[  472.096136]  ? mutex_lock+0x75/0xc0
[  472.096136]  ? mutex_lock+0x88/0xc0
[  472.096136]  ? mutex_lock+0x75/0xc0
[  472.096136]  l2cap_chan_timeout+0x181/0x300
[  472.096136]  process_one_work+0x5d2/0xe00
[  472.096136]  worker_thread+0xe1d/0x1660
[  472.096136]  ? pr_cont_work+0x5e0/0x5e0
[  472.096136]  kthread+0x2b7/0x350
[  472.096136]  ? pr_cont_work+0x5e0/0x5e0
[  472.096136]  ? kthread_blkcg+0xd0/0xd0
[  472.096136]  ret_from_fork+0x4d/0x80
[  472.096136]  ? kthread_blkcg+0xd0/0xd0
[  472.096136]  ret_from_fork_asm+0x11/0x20
[  472.096136]  </TASK>
[  472.096136] Modules linked in:
[  472.096136] CR2: 0000000000000158
[  472.096136] ---[ end trace 0000000000000000 ]---
[  472.096136] RIP: 0010:mutex_lock+0x88/0xc0
[  472.096136] Code: be 08 00 00 00 e8 f8 23 1f fd 4c 89 f7 be 08 00 00 00 e8 eb 23 1f fd 42 80 3c 23 00 74 08 48 88
[  472.096136] RSP: 0018:ffff88800744fc78 EFLAGS: 00000246
[  472.096136] RAX: 0000000000000000 RBX: 1ffff11000e89f8f RCX: ffffffff8457c865
[  472.096136] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88800744fc78
[  472.096136] RBP: 0000000000000158 R08: ffff88800744fc7f R09: 1ffff11000e89f8f
[  472.132932] R10: dffffc0000000000 R11: ffffed1000e89f90 R12: dffffc0000000000
[  472.132932] R13: 0000000000000158 R14: ffff88800744fc78 R15: ffff888007405a00
[  472.132932] FS:  0000000000000000(0000) GS:ffff88806d200000(0000) knlGS:0000000000000000
[  472.132932] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  472.132932] CR2: 0000000000000158 CR3: 000000000da32000 CR4: 00000000000006f0
[  472.132932] Kernel panic - not syncing: Fatal exception
[  472.132932] Kernel Offset: disabled
[  472.132932] ---[ end Kernel panic - not syncing: Fatal exception ]---

Add a check to judge whether the conn is null in l2cap_chan_timeout()
in order to mitigate the bug.

Fixes: 3df91ea2 ("Bluetooth: Revert to mutexes from RCU list")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Fix potential null-ptr-deref in hci_le_big_sync_established_evt().

Fixes: f777d882 (Bluetooth: ISO: Notify user space about failed bis connections)
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Bluetooth is not a random device connected to the MMC/SD controller. It
is function 2 of the SDIO device.

Fix the address of the bluetooth node. Also fix the node name and drop
the label.

Fixes: 055ef10c ("arm64: dts: mt8183: Add jacuzzi pico/pico6 board")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Add the missing sanity check when fetching the board id to avoid leaking
slab data when later requesting the firmware.

Fixes: a7f8dedb ("Bluetooth: qca: add support for QCA2066")
Cc: stable@vger.kernel.org	# 6.7
Cc: Tim Jiang <quic_tjiang@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Add the missing sanity checks and move the 255-byte build-id buffer off
the stack to avoid leaking stack data through debugfs in case the
build-info reply is malformed.

Fixes: c0187b0b ("Bluetooth: btqca: Add support to read FW build version for WCN3991 BTSoC")
Cc: stable@vger.kernel.org	# 5.12
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

The default device address apparently comes from the NVM configuration
file and can differ quite a bit between controllers.

Store the default address when parsing the configuration file and use it
to determine whether the controller has been provisioned with an
address.

This makes sure that devices without a unique address start as
unconfigured unless a valid address has been provided in the devicetree.

Fixes: 32868e12 ("Bluetooth: qca: fix invalid device address check")
Cc: stable@vger.kernel.org      # 6.5
Cc: Doug Anderson <dianders@chromium.org>
Cc: Janaki Ramaiah Thota <quic_janathot@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

The NVM configuration files used by WCN3988 and WCN3990/1/8 have two
sets of configuration tags that are enclosed by a type-length header of
type four which the current parser fails to account for.

Instead the driver happily parses random data as if it were valid tags,
something which can lead to the configuration data being corrupted if it
ever encounters the words 0x0011 or 0x001b.

As is clear from commit b6388254 ("Bluetooth: btqca: Fix the NVM
baudrate tag offcet for wcn3991") the intention has always been to
process the configuration data also for WCN3991 and WCN3998 which
encodes the baud rate at a different offset.

Fix the parser so that it can handle the WCN3xxx configuration files,
which has an enclosing type-length header of type four and two sets of
TLV tags enclosed by a type-length header of type two and three,
respectively.

Note that only the first set, which contains the tags the driver is
currently looking for, will be parsed for now.

With the parser fixed, the software in-band sleep bit will now be set
for WCN3991 and WCN3998 (as it is for later controllers) and the default
baud rate 3200000 may be updated by the driver also for WCN3xxx
controllers.

Notably the deep-sleep feature bit is already set by default in all
configuration files in linux-firmware.

Fixes: 4219d468 ("Bluetooth: btqca: Add wcn3990 firmware download support.")
Cc: stable@vger.kernel.org	# 4.19
Cc: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Add the missing sanity checks when parsing the firmware files before
downloading them to avoid accessing and corrupting memory beyond the
vmalloced buffer.

Fixes: 83e81961 ("Bluetooth: btqca: Introduce generic QCA ROME support")
Cc: stable@vger.kernel.org	# 4.10
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Tying the msft->data lifetime to hdev by freeing it in
hci_release_dev() to fix the following case:

[use]
msft_do_close()
  msft = hdev->msft_data;
  if (!msft)                      ...(1) <- passed.
    return;
  mutex_lock(&msft->filter_lock); ...(4) <- used after freed.

[free]
msft_unregister()
  msft = hdev->msft_data;
  hdev->msft_data = NULL;         ...(2)
  kfree(msft);                    ...(3) <- msft is freed.

==================================================================
BUG: KASAN: slab-use-after-free in __mutex_lock_common
kernel/locking/mutex.c:587 [inline]
BUG: KASAN: slab-use-after-free in __mutex_lock+0x8f/0xc30
kernel/locking/mutex.c:752
Read of size 8 at addr ffff888106cbbca8 by task kworker/u5:2/309

Fixes: bf6a4e30 ("Bluetooth: disable advertisement filters during suspend")
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Extend a critical section to prevent chan from early freeing.
Also make the l2cap_connect() return type void. Nothing is using the
returned value but it is ugly to return a potentially freed pointer.
Making it void will help with backports because earlier kernels did use
the return value. Now the compile will break for kernels where this
patch is not a complete fix.

Call stack summary:

[use]
l2cap_bredr_sig_cmd
  l2cap_connect
  ┌ mutex_lock(&conn->chan_lock);
  │ chan = pchan->ops->new_connection(pchan); <- alloc chan
  │ __l2cap_chan_add(conn, chan);
  │   l2cap_chan_hold(chan);
  │   list_add(&chan->list, &conn->chan_l);   ... (1)
  └ mutex_unlock(&conn->chan_lock);
    chan->conf_state              ... (4) <- use after free

[free]
l2cap_conn_del
┌ mutex_lock(&conn->chan_lock);
│ foreach chan in conn->chan_l:            ... (2)
│   l2cap_chan_put(chan);
│     l2cap_chan_destroy
│       kfree(chan)               ... (3) <- chan freed
└ mutex_unlock(&conn->chan_lock);

==================================================================
BUG: KASAN: slab-use-after-free in instrument_atomic_read
include/linux/instrumented.h:68 [inline]
BUG: KASAN: slab-use-after-free in _test_bit
include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline]
BUG: KASAN: slab-use-after-free in l2cap_connect+0xa67/0x11a0
net/bluetooth/l2cap_core.c:4260
Read of size 8 at addr ffff88810bf040a0 by task kworker/u3:1/311

Fixes: 73ffa904 ("Bluetooth: Move conf_{req,rsp} stuff to struct l2cap_chan")
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Qualcomm Bluetooth controllers may not have been provisioned with a
valid device address and instead end up using the default address
00:00:00:00:5a:ad.

This address is now used to determine if a controller has a valid
address or if one needs to be provided through devicetree or by user
space before the controller can be used.

It turns out that the WCN3991 controllers used in Chromium Trogdor
machines use a different default address, 39:98:00:00:5a:ad, which also
needs to be marked as invalid so that the correct address is fetched
from the devicetree.

Qualcomm has unfortunately not yet provided any answers as to whether
the 39:98 encodes a hardware id and if there are other variants of the
default address that needs to be handled by the driver.

For now, add the Trogdor WCN3991 default address to the device address
check to avoid having these controllers start with the default address
instead of their assigned addresses.

Fixes: 32868e12 ("Bluetooth: qca: fix invalid device address check")
Cc: stable@vger.kernel.org      # 6.5
Cc: Doug Anderson <dianders@chromium.org>
Cc: Janaki Ramaiah Thota <quic_janathot@quicinc.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

When the sco connection is established and then, the sco socket
is releasing, timeout_work will be scheduled to judge whether
the sco disconnection is timeout. The sock will be deallocated
later, but it is dereferenced again in sco_sock_timeout. As a
result, the use-after-free bugs will happen. The root cause is
shown below:

    Cleanup Thread               |      Worker Thread
sco_sock_release                 |
  sco_sock_close                 |
    __sco_sock_close             |
      sco_sock_set_timer         |
        schedule_delayed_work    |
  sco_sock_kill                  |    (wait a time)
    sock_put(sk) //FREE          |  sco_sock_timeout
                                 |    sock_hold(sk) //USE

The KASAN report triggered by POC is shown below:

[   95.890016] ==================================================================
[   95.890496] BUG: KASAN: slab-use-after-free in sco_sock_timeout+0x5e/0x1c0
[   95.890755] Write of size 4 at addr ffff88800c388080 by task kworker/0:0/7
...
[   95.890755] Workqueue: events sco_sock_timeout
[   95.890755] Call Trace:
[   95.890755]  <TASK>
[   95.890755]  dump_stack_lvl+0x45/0x110
[   95.890755]  print_address_description+0x78/0x390
[   95.890755]  print_report+0x11b/0x250
[   95.890755]  ? __virt_addr_valid+0xbe/0xf0
[   95.890755]  ? sco_sock_timeout+0x5e/0x1c0
[   95.890755]  kasan_report+0x139/0x170
[   95.890755]  ? update_load_avg+0xe5/0x9f0
[   95.890755]  ? sco_sock_timeout+0x5e/0x1c0
[   95.890755]  kasan_check_range+0x2c3/0x2e0
[   95.890755]  sco_sock_timeout+0x5e/0x1c0
[   95.890755]  process_one_work+0x561/0xc50
[   95.890755]  worker_thread+0xab2/0x13c0
[   95.890755]  ? pr_cont_work+0x490/0x490
[   95.890755]  kthread+0x279/0x300
[   95.890755]  ? pr_cont_work+0x490/0x490
[   95.890755]  ? kthread_blkcg+0xa0/0xa0
[   95.890755]  ret_from_fork+0x34/0x60
[   95.890755]  ? kthread_blkcg+0xa0/0xa0
[   95.890755]  ret_from_fork_asm+0x11/0x20
[   95.890755]  </TASK>
[   95.890755]
[   95.890755] Allocated by task 506:
[   95.890755]  kasan_save_track+0x3f/0x70
[   95.890755]  __kasan_kmalloc+0x86/0x90
[   95.890755]  __kmalloc+0x17f/0x360
[   95.890755]  sk_prot_alloc+0xe1/0x1a0
[   95.890755]  sk_alloc+0x31/0x4e0
[   95.890755]  bt_sock_alloc+0x2b/0x2a0
[   95.890755]  sco_sock_create+0xad/0x320
[   95.890755]  bt_sock_create+0x145/0x320
[   95.890755]  __sock_create+0x2e1/0x650
[   95.890755]  __sys_socket+0xd0/0x280
[   95.890755]  __x64_sys_socket+0x75/0x80
[   95.890755]  do_syscall_64+0xc4/0x1b0
[   95.890755]  entry_SYSCALL_64_after_hwframe+0x67/0x6f
[   95.890755]
[   95.890755] Freed by task 506:
[   95.890755]  kasan_save_track+0x3f/0x70
[   95.890755]  kasan_save_free_info+0x40/0x50
[   95.890755]  poison_slab_object+0x118/0x180
[   95.890755]  __kasan_slab_free+0x12/0x30
[   95.890755]  kfree+0xb2/0x240
[   95.890755]  __sk_destruct+0x317/0x410
[   95.890755]  sco_sock_release+0x232/0x280
[   95.890755]  sock_close+0xb2/0x210
[   95.890755]  __fput+0x37f/0x770
[   95.890755]  task_work_run+0x1ae/0x210
[   95.890755]  get_signal+0xe17/0xf70
[   95.890755]  arch_do_signal_or_restart+0x3f/0x520
[   95.890755]  syscall_exit_to_user_mode+0x55/0x120
[   95.890755]  do_syscall_64+0xd1/0x1b0
[   95.890755]  entry_SYSCALL_64_after_hwframe+0x67/0x6f
[   95.890755]
[   95.890755] The buggy address belongs to the object at ffff88800c388000
[   95.890755]  which belongs to the cache kmalloc-1k of size 1024
[   95.890755] The buggy address is located 128 bytes inside of
[   95.890755]  freed 1024-byte region [ffff88800c388000, ffff88800c388400)
[   95.890755]
[   95.890755] The buggy address belongs to the physical page:
[   95.890755] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0xffff88800c38a800 pfn:0xc388
[   95.890755] head: order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[   95.890755] anon flags: 0x100000000000840(slab|head|node=0|zone=1)
[   95.890755] page_type: 0xffffffff()
[   95.890755] raw: 0100000000000840 ffff888006842dc0 0000000000000000 0000000000000001
[   95.890755] raw: ffff88800c38a800 000000000010000a 00000001ffffffff 0000000000000000
[   95.890755] head: 0100000000000840 ffff888006842dc0 0000000000000000 0000000000000001
[   95.890755] head: ffff88800c38a800 000000000010000a 00000001ffffffff 0000000000000000
[   95.890755] head: 0100000000000003 ffffea000030e201 ffffea000030e248 00000000ffffffff
[   95.890755] head: 0000000800000000 0000000000000000 00000000ffffffff 0000000000000000
[   95.890755] page dumped because: kasan: bad access detected
[   95.890755]
[   95.890755] Memory state around the buggy address:
[   95.890755]  ffff88800c387f80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[   95.890755]  ffff88800c388000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   95.890755] >ffff88800c388080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   95.890755]                    ^
[   95.890755]  ffff88800c388100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   95.890755]  ffff88800c388180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
[   95.890755] ==================================================================

Fix this problem by adding a check protected by sco_conn_lock to judget
whether the conn->hcon is null. Because the conn->hcon will be set to null,
when the sock is releasing.

Fixes: ba316be1 ("Bluetooth: schedule SCO timeouts with delayed_work")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Anderson Nascimento reported a use-after-free splat in tcp_twsk_unique()
with nice analysis.

Since commit ec94c269 ("tcp/dccp: avoid one atomic operation for
timewait hashdance"), inet_twsk_hashdance() sets TIME-WAIT socket's
sk_refcnt after putting it into ehash and releasing the bucket lock.

Thus, there is a small race window where other threads could try to
reuse the port during connect() and call sock_hold() in tcp_twsk_unique()
for the TIME-WAIT socket with zero refcnt.

If that happens, the refcnt taken by tcp_twsk_unique() is overwritten
and sock_put() will cause underflow, triggering a real use-after-free
somewhere else.

To avoid the use-after-free, we need to use refcount_inc_not_zero() in
tcp_twsk_unique() and give up on reusing the port if it returns false.

[0]:
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 0 PID: 1039313 at lib/refcount.c:25 refcount_warn_saturate+0xe5/0x110
CPU: 0 PID: 1039313 Comm: trigger Not tainted 6.8.6-200.fc39.x86_64 #1
Hardware name: VMware, Inc. VMware20,1/440BX Desktop Reference Platform, BIOS VMW201.00V.21805430.B64.2305221830 05/22/2023
RIP: 0010:refcount_warn_saturate+0xe5/0x110
Code: 42 8e ff 0f 0b c3 cc cc cc cc 80 3d aa 13 ea 01 00 0f 85 5e ff ff ff 48 c7 c7 f8 8e b7 82 c6 05 96 13 ea 01 01 e8 7b 42 8e ff <0f> 0b c3 cc cc cc cc 48 c7 c7 50 8f b7 82 c6 05 7a 13 ea 01 01 e8
RSP: 0018:ffffc90006b43b60 EFLAGS: 00010282
RAX: 0000000000000000 RBX: ffff888009bb3ef0 RCX: 0000000000000027
RDX: ffff88807be218c8 RSI: 0000000000000001 RDI: ffff88807be218c0
RBP: 0000000000069d70 R08: 0000000000000000 R09: ffffc90006b439f0
R10: ffffc90006b439e8 R11: 0000000000000003 R12: ffff8880029ede84
R13: 0000000000004e20 R14: ffffffff84356dc0 R15: ffff888009bb3ef0
FS:  00007f62c10926c0(0000) GS:ffff88807be00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000020ccb000 CR3: 000000004628c005 CR4: 0000000000f70ef0
PKRU: 55555554
Call Trace:
 <TASK>
 ? refcount_warn_saturate+0xe5/0x110
 ? __warn+0x81/0x130
 ? refcount_warn_saturate+0xe5/0x110
 ? report_bug+0x171/0x1a0
 ? refcount_warn_saturate+0xe5/0x110
 ? handle_bug+0x3c/0x80
 ? exc_invalid_op+0x17/0x70
 ? asm_exc_invalid_op+0x1a/0x20
 ? refcount_warn_saturate+0xe5/0x110
 tcp_twsk_unique+0x186/0x190
 __inet_check_established+0x176/0x2d0
 __inet_hash_connect+0x74/0x7d0
 ? __pfx___inet_check_established+0x10/0x10
 tcp_v4_connect+0x278/0x530
 __inet_stream_connect+0x10f/0x3d0
 inet_stream_connect+0x3a/0x60
 __sys_connect+0xa8/0xd0
 __x64_sys_connect+0x18/0x20
 do_syscall_64+0x83/0x170
 entry_SYSCALL_64_after_hwframe+0x78/0x80
RIP: 0033:0x7f62c11a885d
Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d a3 45 0c 00 f7 d8 64 89 01 48
RSP: 002b:00007f62c1091e58 EFLAGS: 00000296 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 0000000020ccb004 RCX: 00007f62c11a885d
RDX: 0000000000000010 RSI: 0000000020ccb000 RDI: 0000000000000003
RBP: 00007f62c1091e90 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000296 R12: 00007f62c10926c0
R13: ffffffffffffff88 R14: 0000000000000000 R15: 00007ffe237885b0
 </TASK>

Fixes: ec94c269 ("tcp/dccp: avoid one atomic operation for timewait hashdance")
Reported-by: Anderson Nascimento <anderson@allelesecurity.com>
Closes: https://lore.kernel.org/netdev/37a477a6-d39e-486b-9577-3463f655a6b7@allelesecurity.com/Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240501213145.62261-1-kuniyu@amazon.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

TCP_SYN_RECV state is really special, it is only used by
cross-syn connections, mostly used by fuzzers.

In the following crash [1], syzbot managed to trigger a divide
by zero in tcp_rcv_space_adjust()

A socket makes the following state transitions,
without ever calling tcp_init_transfer(),
meaning tcp_init_buffer_space() is also not called.

         TCP_CLOSE
connect()
         TCP_SYN_SENT
         TCP_SYN_RECV
shutdown() -> tcp_shutdown(sk, SEND_SHUTDOWN)
         TCP_FIN_WAIT1

To fix this issue, change tcp_shutdown() to not
perform a TCP_SYN_RECV -> TCP_FIN_WAIT1 transition,
which makes no sense anyway.

When tcp_rcv_state_process() later changes socket state
from TCP_SYN_RECV to TCP_ESTABLISH, then look at
sk->sk_shutdown to finally enter TCP_FIN_WAIT1 state,
and send a FIN packet from a sane socket state.

This means tcp_send_fin() can now be called from BH
context, and must use GFP_ATOMIC allocations.

[1]
divide error: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 1 PID: 5084 Comm: syz-executor358 Not tainted 6.9.0-rc6-syzkaller-00022-g98369dcc #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024
 RIP: 0010:tcp_rcv_space_adjust+0x2df/0x890 net/ipv4/tcp_input.c:767
Code: e3 04 4c 01 eb 48 8b 44 24 38 0f b6 04 10 84 c0 49 89 d5 0f 85 a5 03 00 00 41 8b 8e c8 09 00 00 89 e8 29 c8 48 0f af c3 31 d2 <48> f7 f1 48 8d 1c 43 49 8d 96 76 08 00 00 48 89 d0 48 c1 e8 03 48
RSP: 0018:ffffc900031ef3f0 EFLAGS: 00010246
RAX: 0c677a10441f8f42 RBX: 000000004fb95e7e RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000027d4b11f R08: ffffffff89e535a4 R09: 1ffffffff25e6ab7
R10: dffffc0000000000 R11: ffffffff8135e920 R12: ffff88802a9f8d30
R13: dffffc0000000000 R14: ffff88802a9f8d00 R15: 1ffff1100553f2da
FS:  00005555775c0380(0000) GS:ffff8880b9500000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f1155bf2304 CR3: 000000002b9f2000 CR4: 0000000000350ef0
Call Trace:
 <TASK>
  tcp_recvmsg_locked+0x106d/0x25a0 net/ipv4/tcp.c:2513
  tcp_recvmsg+0x25d/0x920 net/ipv4/tcp.c:2578
  inet6_recvmsg+0x16a/0x730 net/ipv6/af_inet6.c:680
  sock_recvmsg_nosec net/socket.c:1046 [inline]
  sock_recvmsg+0x109/0x280 net/socket.c:1068
  ____sys_recvmsg+0x1db/0x470 net/socket.c:2803
  ___sys_recvmsg net/socket.c:2845 [inline]
  do_recvmmsg+0x474/0xae0 net/socket.c:2939
  __sys_recvmmsg net/socket.c:3018 [inline]
  __do_sys_recvmmsg net/socket.c:3041 [inline]
  __se_sys_recvmmsg net/socket.c:3034 [inline]
  __x64_sys_recvmmsg+0x199/0x250 net/socket.c:3034
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7faeb6363db9
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 c1 17 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffcc1997168 EFLAGS: 00000246 ORIG_RAX: 000000000000012b
RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007faeb6363db9
RDX: 0000000000000001 RSI: 0000000020000bc0 RDI: 0000000000000005
RBP: 0000000000000000 R08: 0000000000000000 R09: 000000000000001c
R10: 0000000000000122 R11: 0000000000000246 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000001

Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Link: https://lore.kernel.org/r/20240501125448.896529-1-edumazet@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Paolo Abeni:
 "Including fixes from bpf.

  Relatively calm week, likely due to public holiday in most places. No
  known outstanding regressions.

  Current release - regressions:

   - rxrpc: fix wrong alignmask in __page_frag_alloc_align()

   - eth: e1000e: change usleep_range to udelay in PHY mdic access

  Previous releases - regressions:

   - gro: fix udp bad offset in socket lookup

   - bpf: fix incorrect runtime stat for arm64

   - tipc: fix UAF in error path

   - netfs: fix a potential infinite loop in extract_user_to_sg()

   - eth: ice: ensure the copied buf is NUL terminated

   - eth: qeth: fix kernel panic after setting hsuid

  Previous releases - always broken:

   - bpf:
       - verifier: prevent userspace memory access
       - xdp: use flags field to disambiguate broadcast redirect

   - bridge: fix multicast-to-unicast with fraglist GSO

   - mptcp: ensure snd_nxt is properly initialized on connect

   - nsh: fix outer header access in nsh_gso_segment().

   - eth: bcmgenet: fix racing registers access

   - eth: vxlan: fix stats counters.

  Misc:

   - a bunch of MAINTAINERS file updates"

* tag 'net-6.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits)
  MAINTAINERS: mark MYRICOM MYRI-10G as Orphan
  MAINTAINERS: remove Ariel Elior
  net: gro: add flush check in udp_gro_receive_segment
  net: gro: fix udp bad offset in socket lookup by adding {inner_}network_offset to napi_gro_cb
  ipv4: Fix uninit-value access in __ip_make_skb()
  s390/qeth: Fix kernel panic after setting hsuid
  vxlan: Pull inner IP header in vxlan_rcv().
  tipc: fix a possible memleak in tipc_buf_append
  tipc: fix UAF in error path
  rxrpc: Clients must accept conn from any address
  net: core: reject skb_copy(_expand) for fraglist GSO skbs
  net: bridge: fix multicast-to-unicast with fraglist GSO
  mptcp: ensure snd_nxt is properly initialized on connect
  e1000e: change usleep_range to udelay in PHY mdic access
  net: dsa: mv88e6xxx: Fix number of databases for 88E6141 / 88E6341
  cxgb4: Properly lock TX queue for the selftest.
  rxrpc: Fix using alignmask being zero for __page_frag_alloc_align()
  vxlan: Add missing VNI filter counter update in arp_reduce().
  vxlan: Fix racy device stats updates.
  net: qede: use return from qede_parse_actions()
  ...

Chris's email address bounces and lore hasn't seen an email
from anyone with his name for almost a decade.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240430233532.1356982-1-kuba@kernel.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

aelior@marvell.com bounces, we haven't seen Ariel on lore
since March 2022.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20240430233305.1356105-1-kuba@kernel.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Richard Gobert says:

====================
net: gro: add flush/flush_id checks and fix wrong offset in udp

This series fixes a bug in the complete phase of UDP in GRO, in which
socket lookup fails due to using network_header when parsing encapsulated
packets. The fix is to add network_offset and inner_network_offset to
napi_gro_cb and use these offsets for socket lookup.

In addition p->flush/flush_id should be checked in all UDP flows. The
same logic from tcp_gro_receive is applied for all flows in
udp_gro_receive_segment. This prevents packets with mismatching network
headers (flush/flush_id turned on) from merging in UDP GRO.

The original series includes a change to vxlan test which adds the local
parameter to prevent similar future bugs. I plan to submit it separately to
net-next.

This series is part of a previously submitted series to net-next:
https://lore.kernel.org/all/20240408141720.98832-1-richardbgobert@gmail.com/

v3 -> v4:
 - Store network offsets, and use them only in udp_gro_complete flows
 - Correct commit hash used in Fixes tag
 - v3:
 https://lore.kernel.org/netdev/20240424163045.123528-1-richardbgobert@gmail.com/

v2 -> v3:
 - Add network_offsets and fix udp bug in a single commit to make backporting easier
 - Write to inner_network_offset in {inet,ipv6}_gro_receive
 - Use network_offsets union in tcp[46]_gro_complete as well
 - v2:
 https://lore.kernel.org/netdev/20240419153542.121087-1-richardbgobert@gmail.com/

v1 -> v2:
 - Use network_offsets instead of p_poff param as suggested by Willem
 - Check flush before postpull, and for all UDP GRO flows
 - v1:
 https://lore.kernel.org/netdev/20240412152120.115067-1-richardbgobert@gmail.com/
====================

Link: https://lore.kernel.org/r/20240430143555.126083-1-richardbgobert@gmail.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>