- 26 Feb, 2010 6 commits
-
-
Arnaldo Carvalho de Melo authored
Without this patch we get this for need_resched: [root@mica ~]# perf annotate need_resched ------------------------------------------------ Percent | Source code & Disassembly of vmlinux ------------------------------------------------ : : : Disassembly of section .text: : : ffffffff810095ed <need_resched>: : return (state & TASK_INTERRUPTIBLE) || __fatal_signal_pending(p); : } : : static inline int need_resched(void) : { 0.00 : ffffffff810095ed: 55 push %rbp : return unlikely(test_thread_flag(TIF_NEED_RESCHED)); 0.00 : ffffffff810095ee: be 03 00 00 00 mov $0x3,%esi : : static inline struct thread_info *current_thread_info(void) : { : struct thread_info *ti; : ti = (void *)(percpu_read_stable(kernel_stack) + 0.00 : ffffffff810095f3: 65 48 8b 3c 25 48 b5 mov %gs:0xb548,%rdi 0.00 : ffffffff810095fa: 00 00 : return (state & TASK_INTERRUPTIBLE) || __fatal_signal_pending(p); : } : : static inline int need_resched(void) : { 0.00 : ffffffff810095fc: 48 89 e5 mov %rsp,%rbp : return unlikely(test_thread_flag(TIF_NEED_RESCHED)); 0.00 : ffffffff810095ff: 48 81 ef d8 1f 00 00 sub $0x1fd8,%rdi 0.00 : ffffffff81009606: e8 9d ff ff ff callq ffffffff810095a8 <test_ti_thread_flag> : } 0.00 : ffffffff8100960b: c9 leaveq 0.00 : ffffffff8100960c: 85 c0 test %eax,%eax 0.00 : ffffffff8100960e: 0f 95 c0 setne %al 0.00 : ffffffff81009611: 0f b6 c0 movzbl %al,%eax : Disassembly of section .vsyscall_0: : Disassembly of section .vsyscall_fn: : Disassembly of section .vsyscall_1: : Disassembly of section .vsyscall_2: : Disassembly of section .init.text: : Disassembly of section .altinstr_replacement: : Disassembly of section .exit.text: [root@mica ~]# But from the 'perf report' result we know that there are hits for need_resched on a 4 way machine mostly doing nothing, so after adding code to show what is in each hist offset and collapsing IP hits for what happens between objdump lines we get, for the same perf.data file: [root@mica ~]# perf annotate -v need_resched ------------------------------------------------ Percent | Source code & Disassembly of vmlinux ------------------------------------------------ : : : Disassembly of section .text: : : ffffffff810095ed <need_resched>: : return (state & TASK_INTERRUPTIBLE) || __fatal_signal_pending(p); : } : : static inline int need_resched(void) : { 0.00 : ffffffff810095ed: 55 push %rbp : return unlikely(test_thread_flag(TIF_NEED_RESCHED)); 52.78 : ffffffff810095ee: be 03 00 00 00 mov $0x3,%esi : : static inline struct thread_info *current_thread_info(void) : { : struct thread_info *ti; : ti = (void *)(percpu_read_stable(kernel_stack) + 0.00 : ffffffff810095f3: 65 48 8b 3c 25 48 b5 mov %gs:0xb548,%rdi 0.00 : ffffffff810095fa: 00 00 : return (state & TASK_INTERRUPTIBLE) || __fatal_signal_pending(p); : } : : static inline int need_resched(void) : { 0.00 : ffffffff810095fc: 48 89 e5 mov %rsp,%rbp : return unlikely(test_thread_flag(TIF_NEED_RESCHED)); 9.72 : ffffffff810095ff: 48 81 ef d8 1f 00 00 sub $0x1fd8,%rdi 0.00 : ffffffff81009606: e8 9d ff ff ff callq ffffffff810095a8 <test_ti_thread_flag> : } 0.00 : ffffffff8100960b: c9 leaveq 0.00 : ffffffff8100960c: 85 c0 test %eax,%eax 37.50 : ffffffff8100960e: 0f 95 c0 setne %al 0.00 : ffffffff81009611: 0f b6 c0 movzbl %al,%eax : Disassembly of section .vsyscall_0: : Disassembly of section .vsyscall_fn: : Disassembly of section .vsyscall_1: : Disassembly of section .vsyscall_2: : Disassembly of section .init.text: : Disassembly of section .altinstr_replacement: : Disassembly of section .exit.text: [root@mica ~]# And now 'perf annotate -v', verbose mode, will show the hits per precise IP, so that one can make sense of the attribution to each objdumop line: [root@mica ~]# perf annotate -v need_resched Looking at the vmlinux_path (5 entries long) Using /lib/modules/2.6.33-rc8-tip-00784-g3471df5-dirty/build/vmlinux for symbols annotate_sym: filename=/lib/modules/2.6.33-rc8-tip-00784-g3471df5-dirty/build/vmlinux, sym=need_resched, start=0xffffffff810095ed, end=0xffffffff81009614 ------------------------------------------------ Percent | Source code & Disassembly of vmlinux ------------------------------------------------ ffffffff810095f1: 152 ffffffff81009603: 28 ffffffff8100960f: 55 ffffffff81009610: 53 h->sum: 288 <SNIP same annotation> Signed-off-by:Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Miller <davem@davemloft.net> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1267194194-15670-1-git-send-email-acme@infradead.org> Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Peter Zijlstra authored
We re-program the event control register every time we reset the count, this appears to be superflous, hence remove it. Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Arjan van de Ven <arjan@linux.intel.com> LKML-Reference: <new-submission> Signed-off-by:
-
Peter Zijlstra authored
Since the cpu argument to hw_perf_group_sched_in() is always smp_processor_id(), simplify the code a little by removing this argument and using the current cpu where needed. Signed-off-by:
-
Stephane Eranian authored
This patch adds correct AMD NorthBridge event scheduling. NB events are events measuring L3 cache, Hypertransport traffic. They are identified by an event code >= 0xe0. They measure events on the Northbride which is shared by all cores on a package. NB events are counted on a shared set of counters. When a NB event is programmed in a counter, the data actually comes from a shared counter. Thus, access to those counters needs to be synchronized. We implement the synchronization such that no two cores can be measuring NB events using the same counters. Thus, we maintain a per-NB allocation table. The available slot is propagated using the event_constraint structure. Signed-off-by:
Stephane Eranian <eranian@google.com> Signed-off-by:
-
Stephane Eranian authored
In certain situations, the kernel may need to stop and start the same event rapidly. The current PMU callbacks do not distinguish between stop and release (i.e., stop + free the resource). Thus, a counter may be released, then it will be immediately re-acquired. Event scheduling will again take place with no guarantee to assign the same counter. On some processors, this may event yield to failure to assign the event back due to competion between cores. This patch is adding a new pair of callback to stop and restart a counter without actually release the underlying counter resource. On stop, the counter is stopped, its values saved and that's it. On start, the value is reloaded and counter is restarted (on x86, actual restart is delayed until perf_enable()). Signed-off-by:
-
Peter Zijlstra authored
DaveM reported that currently perf interprets the pgoff value reported by the MMAP events as a byte range, but the kernel reports it as a page offset. Since its broken (and unusable) anyway, change the kernel behaviour (ABI) to report bytes indeed, avoiding the need for userspace to deal with PAGE_SIZE things. Reported-by:
David Miller <davem@davemloft.net> Signed-off-by:
-
- 25 Feb, 2010 9 commits
-
-
Arnaldo Carvalho de Melo authored
Because symbol->end is not fixed up at symbol_filter time, only after all symbols for a DSO are loaded, and that, for asm symbols, may be bogus, causing segfaults when hits happen in these symbols. Reported-by:
Anton Blanchard <anton@samba.org> Acked-by:
-
Arnaldo Carvalho de Melo authored
Be more clear about DSO long names and tell from which file kernel symbols were obtained, all in --verbose mode: [root@mica ~]# perf report -v > /dev/null Looking at the vmlinux_path (5 entries long) Using /lib/modules/2.6.33-rc8-tip-00777-g0918527-dirty/build/vmlinux for symbols [root@mica ~]# mv /lib/modules/2.6.33-rc8-tip-00777-g0918527-dirty/build/vmlinux /tmp/dd [root@mica ~]# perf report -v > /dev/null Looking at the vmlinux_path (5 entries long) Using /proc/kallsyms for symbols [root@mica ~]# Signed-off-by: -
Arnaldo Carvalho de Melo authored
To overcome a silly gcc warning: cc1: warnings being treated as errors builtin-top.c: In function ‘lookup_sym_source’: builtin-top.c:291: warning: not protecting local variables: variable length buffer make: *** [builtin-top.o] Error 1 make: *** Waiting for unfinished jobs.... That is emitted for this: const size_t pattern_len = BITS_PER_LONG / 4 + 2; char pattern[pattern_len + 1]; Signed-off-by:
-
Zhang, Yanmin authored
In function dso__split_kallsyms(), curr_map saves the return value of map__new2. So check it instead of var map after the call returns. Signed-off-by:
Zhang Yanmin <yanmin_zhang@linux.intel.com> Acked-by:
-
Frederic Weisbecker authored
syscall_name() helper, which resolves a syscall arch number to its name, is not yet available as we first need to implement event injection for it to work. Remove it from the documentation or tag its references as unavailable yet. Once it's implemented, we can just revert the current patch. Signed-off-by:Frederic Weisbecker <fweisbec@gmail.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Keiichi KII <k-keiichi@bx.jp.nec.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
-
Tom Zanussi authored
Also small update to perf-trace-perl and perf-trace docs. Signed-off-by:
Tom Zanussi <tzanussi@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Keiichi KII <k-keiichi@bx.jp.nec.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> LKML-Reference: <1264580883-15324-13-git-send-email-tzanussi@gmail.com> Signed-off-by:
-
Tom Zanussi authored
If we know the size of a tuple in advance, there's no need to resize it - start out with the known size in the first place. Signed-off-by:
-
Tom Zanussi authored
Adds a set of scripts that aggregate system call totals and system call errors. Most are Python scripts that also test basic functionality of the new Python engine, but there's also one Perl script added for comparison and for reference in some new Documentation contained in a later patch. Signed-off-by:
-
Tom Zanussi authored
Add base support for Python scripting to perf trace. Signed-off-by:
-
- 23 Feb, 2010 5 commits
-
-
Tom Zanussi authored
The check-perf-trace script only checks Perl functionality, and doesn't really need to be listed as as user script anyway. This only removes the '-report' shell script, so although it doesn't appear in the listing, the '-record' shell script and the check perf trace perl script itself is still available and can still be run manually as such: $ libexec/perf-core/scripts/perl/bin/check-perf-trace-record $ perf trace -s libexec/perf-core/scripts/perl/check-perf-trace.pl Signed-off-by:
-
Tom Zanussi authored
Create a scripting-engines directory to contain scripting engine implementation code, in anticipation of the addition of new scripting support. Also removes trace-event-perl.h. Signed-off-by:
-
Tom Zanussi authored
This stuff is needed by all scripting engines; move it from the Perl engine source to a more common place. Signed-off-by:
-
Tom Zanussi authored
Fix bogus calculation. Signed-off-by:
-
Tom Zanussi authored
'perf trace -s list' prints a list of the supported scripting languages. One problem with it is that it falls through and prints the trace as well. The use of 'list' for this also makes it easy to confuse with 'perf trace -l', used for listing available scripts. So change 'perf trace -s list' to 'perf trace -s lang' and fixes the fall-through problem. Signed-off-by:
-
- 21 Feb, 2010 2 commits
-
-
Arnaldo Carvalho de Melo authored
As the parent comm then is worthless, confusing users about the thread where the sample really happened, leading to think that the sample happened in the parent, not where it really happened, in the children of a thread for which a PERF_RECORD_COMM event was not received. Signed-off-by:
-
Arnaldo Carvalho de Melo authored
In 2161db96 we stopped failing when not finding modules when asked too, but then the kernel maps (just one, for vmlinux) wasn't having its ->end field correctly set up, so symbols were not being found for the vmlinux map because its range was 0-0. Reported-by:
-
- 08 Feb, 2010 1 commit
-
-
austin_zhang@linux.intel.com authored
When 'perf record -g' a existing process, even with debuginfo packages, still cannnot get symbol from 'perf report'. try: perf record -g -p `pidof xxx` -f perf report 68.26% :1181 b74870f2 [.] 0x000000b74870f2 | |--32.09%-- 0xb73b5b44 | 0xb7487102 | 0xb748a4e2 | 0xb748633d | 0xb73b41cd | 0xb73b4467 | 0xb747d531 The reason is: for existing process, in __cmd_record(), the pid is 0 rather than the existing process id. Signed-off-by:Austin Zhang <austin_zhang@linux.intel.com> Acked-by:
-
- 07 Feb, 2010 3 commits
-
-
Masami Hiramatsu authored
Fixes these warnings: arch/x86/kernel/alternative.c: In function 'alternatives_text_reserved': arch/x86/kernel/alternative.c:402: warning: comparison of distinct pointer types lacks a cast arch/x86/kernel/alternative.c:402: warning: comparison of distinct pointer types lacks a cast arch/x86/kernel/alternative.c:405: warning: comparison of distinct pointer types lacks a cast arch/x86/kernel/alternative.c:405: warning: comparison of distinct pointer types lacks a cast Caused by: 2cfa1978: ftrace/alternatives: Introducing *_text_reserved functions Changes in v2: - Use local variables to compare, instead of type casts. Reported-by:
Masami Hiramatsu <mhiramat@redhat.com> Cc: systemtap <systemtap@sources.redhat.com> Cc: DLE <dle-develop@lists.sourceforge.net> LKML-Reference: <20100205171647.15750.37221.stgit@dhcp-100-2-132.bos.redhat.com> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
Because we may have aliases, like __GI___strcoll_l in /lib64/libc-2.10.2.so that appears in objdump as: $ objdump --start-address=0x0000003715a86420 \ --stop-address=0x0000003715a872dc -dS /lib64/libc-2.10.2.so 0000003715a86420 <__strcoll_l>: 3715a86420: 55 push %rbp 3715a86421: 48 89 e5 mov %rsp,%rbp 3715a86424: 41 57 push %r15 [root@doppio linux-2.6-tip]# So look for the address exactly at the start of the line instead so that annotation can work for in these cases. Signed-off-by: -
Kirill Smelkov authored
First, for programs and prelinked libraries, annotate code was fooled by objdump output IPs (src->eip in the code) being wrongly converted to absolute IPs. In such case there were no conversion needed, but in src->eip = strtoull(src->line, NULL, 16); src->eip = map->unmap_ip(map, src->eip); // = eip + map->start - map->pgoff we were reading absolute address from objdump (e.g. 8048604) and then almost doubling it, because eip & map->start are approximately close for small programs. Needless to say, that later, in record_precise_ip() there was no matching with real runtime IPs. And second, like with `perf annotate` the problem with non-prelinked *.so was that we were doing rip -> objdump address conversion wrong. Also, because unlike `perf annotate`, `perf top` code does annotation based on absolute IPs for performance reasons(*), new helper for mapping objdump addresse to IP is introduced. (*) we get samples info in absolute IPs, and since we do lots of hit-testing on absolute IPs at runtime in record_precise_ip(), it's better to convert objdump addresses to IPs once and do no conversion at runtime. I also had to fix how objdump output is parsed (with hardcoded 8/16 characters format, which was inappropriate for ET_DYN dsos with small addresses like '4ac') Also note, that not all objdump output lines has associtated IPs, e.g. look at source lines here: 000004ac <my_strlen>: extern "C" int my_strlen(const char *s) 4ac: 55 push %ebp 4ad: 89 e5 mov %esp,%ebp 4af: 83 ec 10 sub $0x10,%esp { int len = 0; 4b2: c7 45 fc 00 00 00 00 movl $0x0,-0x4(%ebp) 4b9: eb 08 jmp 4c3 <my_strlen+0x17> while (*s) { ++len; 4bb: 83 45 fc 01 addl $0x1,-0x4(%ebp) ++s; 4bf: 83 45 08 01 addl $0x1,0x8(%ebp) So we mark them with eip=0, and ignore such lines in annotate lookup code. Signed-off-by:Kirill Smelkov <kirr@landau.phys.spbu.ru> [ Note: one hunk of this patch was applied by Mike in 57d81889 ] Signed-off-by:
-
- 05 Feb, 2010 1 commit
-
-
Masami Hiramatsu authored
Since mcount function can be called from everywhere, it should be blacklisted. Moreover, the "mcount" symbol is a special symbol name. So, it is better to put it in the generic blacklist. Signed-off-by:
-
- 04 Feb, 2010 13 commits
-
-
Ingo Molnar authored
perf top and perf record refuses to initialize on non-modular kernels: refuse to initialize: $ perf top -v map_groups__set_modules_path_dir: cannot open /lib/modules/2.6.33-rc6-tip-00586-g398dde3-dirty/ Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> LKML-Reference: <1265223128-11786-1-git-send-email-acme@infradead.org> Signed-off-by: -
Xiao Guangrong authored
Setting _FILE_OFFSET_BITS and using O_LARGEFILE, lseek64, etc, is redundant. Thanks H. Peter Anvin for pointing it out. So, this patch removes O_LARGEFILE, lseek64, etc. Suggested-by:
"H. Peter Anvin" <hpa@zytor.com> Signed-off-by:
Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <4B6A8972.3070605@cn.fujitsu.com> Signed-off-by:
-
Stephane Eranian authored
We cannot assume that because hwc->idx == assign[i], we can avoid reprogramming the counter in hw_perf_enable(). The event may have been scheduled out and another event may have been programmed into this counter. Thus, we need a more robust way of verifying if the counter still contains config/data related to an event. This patch adds a generation number to each counter on each cpu. Using this mechanism we can verify reliabilty whether the content of a counter corresponds to an event. Signed-off-by:
-
Peter Zijlstra authored
Avoid accidental misuse by failing to compile things Suggested-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Peter Zijlstra authored
Implement Intel Core Solo/Duo, aka. Intel Architectural Performance Monitoring Version 1. Signed-off-by:
-
Peter Zijlstra authored
Pretty much all of the calls do perf_disable/perf_enable cycles, pull that out to cut back on hardware programming. Signed-off-by:
-
Masami Hiramatsu authored
Remove record freezing. Because kprobes never puts probe on ftrace's mcount call anymore, it doesn't need ftrace to check whether kprobes on it. Signed-off-by:
-
Masami Hiramatsu authored
Check whether the address of new probe is already reserved by ftrace or alternatives (on x86) when registering new probe. If reserved, it returns an error and not register the probe. Signed-off-by:
-
Masami Hiramatsu authored
Introducing *_text_reserved functions for checking the text address range is partially reserved or not. This patch provides checking routines for x86 smp alternatives and dynamic ftrace. Since both functions modify fixed pieces of kernel text, they should reserve and protect those from other dynamic text modifier, like kprobes. This will also be extended when introducing other subsystems which modify fixed pieces of kernel text. Dynamic text modifiers should avoid those. Signed-off-by:
-
Masami Hiramatsu authored
Disable kprobe booster when CONFIG_PREEMPT=y at this time, because it can't ensure that all kernel threads preempted on kprobe's boosted slot run out from the slot even using freeze_processes(). The booster on preemptive kernel will be resumed if synchronize_tasks() or something like that is introduced. Signed-off-by:
-
Mike Galbraith authored
Signed-off-by:
Mike Galbraith <efault@gmx.de> Cc: Kirill Smelkov <kirr@landau.phys.spbu.ru> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Arnaldo Carvalho de Melo <acme@infradead.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <1265265106.6364.5.camel@marge.simson.net> Signed-off-by:
-
Kirill Smelkov authored
By relying on logic in dso__load_kernel_sym(), we can automatically load vmlinux. The only thing which needs to be adjusted, is how --sym-annotate option is handled - now we can't rely on vmlinux been loaded until full successful pass of dso__load_vmlinux(), but that's not the case if we'll do sym_filter_entry setup in symbol_filter(). So move this step right after event__process_sample() where we know the whole dso__load_kernel_sym() pass is done. By the way, though conceptually similar `perf top` still can't annotate userspace - see next patches with fixes. Signed-off-by:
-
Kirill Smelkov authored
The problem was we were incorrectly calculating objdump addresses for sym->start and sym->end, look: For simple ET_DYN type DSO (*.so) with one function, objdump -dS output is something like this: 000004ac <my_strlen>: int my_strlen(const char *s) 4ac: 55 push %ebp 4ad: 89 e5 mov %esp,%ebp 4af: 83 ec 10 sub $0x10,%esp { i.e. we have relative-to-dso-mapping IPs (=RIP) there. For ET_EXEC type and probably for prelinked libs as well (sorry can't test - I don't use prelink) objdump outputs absolute IPs, e.g. 08048604 <zz_strlen>: extern "C" int zz_strlen(const char *s) 8048604: 55 push %ebp 8048605: 89 e5 mov %esp,%ebp 8048607: 83 ec 10 sub $0x10,%esp { So, if sym->start is always relative to dso mapping(*), we'll have to unmap it for ET_EXEC like cases, and leave as is for ET_DYN cases. (*) and it is - we've explicitely made it relative. Look for adjust_symbols handling in dso__load_sym() Previously we were always unmapping sym->start and for ET_DYN dsos resulting addresses were wrong, and so objdump output was empty. The end result was that perf annotate output for symbols from non-prelinked *.so had always 0.00% percents only, which is wrong. To fix it, let's introduce a helper for converting rip to objdump address, and also let's document what map_ip() and unmap_ip() do -- I had to study sources for several hours to understand it. Signed-off-by:
-
