Pull more kvm updates from Paolo Bonzini:
 "This includes the 6.4 changes for RISC-V, and a few bugfix patches for
  other architectures. For x86, this closes a longstanding performance
  issue in the newer and (usually) more scalable page table management
  code.

  RISC-V:
   - ONE_REG interface to enable/disable SBI extensions
   - Zbb extension for Guest/VM
   - AIA CSR virtualization

  x86:
   - Fix a long-standing TDP MMU flaw, where unloading roots on a vCPU
     can result in the root being freed even though the root is
     completely valid and can be reused as-is (with a TLB flush).

  s390:
   - A couple of bugfixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: s390: fix race in gmap_make_secure()
  KVM: s390: pv: fix asynchronous teardown for small VMs
  KVM: x86: Preserve TDP MMU roots until they are explicitly invalidated
  RISC-V: KVM: Virtualize per-HART AIA CSRs
  RISC-V: KVM: Use bitmap for irqs_pending and irqs_pending_mask
  RISC-V: KVM: Add ONE_REG interface for AIA CSRs
  RISC-V: KVM: Implement subtype for CSR ONE_REG interface
  RISC-V: KVM: Initial skeletal support for AIA
  RISC-V: KVM: Drop the _MASK suffix from hgatp.VMID mask defines
  RISC-V: Detect AIA CSRs from ISA string
  RISC-V: Add AIA related CSR defines
  RISC-V: KVM: Allow Zbb extension for Guest/VM
  RISC-V: KVM: Add ONE_REG interface to enable/disable SBI extensions
  RISC-V: KVM: Alphabetize selects
  KVM: RISC-V: Retry fault if vma_lookup() results become invalid

Pull ACPI fix from Rafael Wysocki:
 "Remove an ACPI backlight quirk for Lenovo ThinkPad W530, added during
  the 6.3 cycle, that turned out to do more harm than help (Hans de
  Goede)"

* tag 'acpi-6.4-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: video: Remove acpi_backlight=video quirk for Lenovo ThinkPad W530

Pull thermal control fixes from Rafael Wysocki:
 "These fix a NULL pointer dereference in the Intel powerclamp driver
  introduced during the 6.3 cycle and update MAINTAINERS to match recent
  code changes.

  Specifics:

   - Fix NULL pointer access in the Intel powerclamp thermal driver that
     occurs on attempts to set the cooling device state to 0 in the
     default configuration (Srinivas Pandruvada)

   - Drop the stale MAINTAINERS entry for the Intel Menlow thermal
     driver that has been removed recently (Lukas Bulwahn)"

* tag 'thermal-6.4-rc1-3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  MAINTAINERS: remove section INTEL MENLOW THERMAL DRIVER
  thermal: intel: powerclamp: Fix NULL pointer access issue

Pull phy fixes from Vinod Koul:

 - Fix for mediatek driver warning for variable used uninitialized and
   for wrong pll math

* tag 'phy-fixes-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
  phy: mediatek: hdmi: mt8195: fix wrong pll calculus
  phy: mediatek: hdmi: mt8195: fix uninitialized variable usage in pll_calc

Pull more drm fixes from Dave Airlie:
 "This is the fixes for the last couple of weeks for i915 and last 3
  weeks for amdgpu, lots of them but pretty scattered around and all
  pretty small.

  amdgpu:
   - SR-IOV fixes
   - DCN 3.2 fixes
   - DC mclk handling fixes
   - eDP fixes
   - SubVP fixes
   - HDCP regression fix
   - DSC fixes
   - DC FP fixes
   - DCN 3.x fixes
   - Display flickering fix when switching between vram and gtt
   - Z8 power saving fix
   - Fix hang when skipping modeset
   - GPU reset fixes
   - Doorbell fix when resizing BARs
   - Fix spurious warnings in gmc
   - Locking fix for AMDGPU_SCHED IOCTL
   - SR-IOV fix
   - DCN 3.1.4 fix
   - DCN 3.2 fix
   - Fix job cleanup when CS is aborted

  i915:
   - skl pipe source size check
   - mtl transcoder mask fix
   - DSI power on sequence fix
   - GuC versioning corner case fix"

* tag 'drm-next-2023-05-05' of git://anongit.freedesktop.org/drm/drm: (48 commits)
  drm/amdgpu: drop redundant sched job cleanup when cs is aborted
  drm/amd/display: filter out invalid bits in pipe_fuses
  drm/amd/display: Change default Z8 watermark values
  drm/amdgpu: disable SDMA WPTR_POLL_ENABLE for SR-IOV
  drm/amdgpu: add a missing lock for AMDGPU_SCHED
  drm/amdgpu: fix an amdgpu_irq_put() issue in gmc_v9_0_hw_fini()
  drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v10_0_hw_fini
  drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v11_0_hw_fini
  drm/amdgpu: Enable doorbell selfring after resize FB BAR
  drm/amdgpu: Use the default reset when loading or reloading the driver
  drm/amdgpu: Fix mode2 reset for sienna cichlid
  drm/i915/dsi: Use unconditional msleep() instead of intel_dsi_msleep()
  drm/i915/mtl: Add the missing CPU transcoder mask in intel_device_info
  drm/i915/guc: Actually return an error if GuC version range check fails
  drm/amd/display: Lowering min Z8 residency time
  drm/amd/display: fix flickering caused by S/G mode
  drm/amd/display: Set min_width and min_height capability for DCN30
  drm/amd/display: Isolate remaining FPU code in DCN32
  drm/amd/display: Update bounding box values for DCN321
  drm/amd/display: Do not clear GPINT register when releasing DMUB from reset
  ...

Commit 2b6a7409 ("thermal: intel: menlow: Get rid of this driver")
removes the driver drivers/thermal/intel/intel_menlow.c, but misses to
remove its reference in MAINTAINERS.

Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken reference.

Remove the INTEL MENLOW THERMAL DRIVER section in MAINTAINERS.

Fixes: 2b6a7409 ("thermal: intel: menlow: Get rid of this driver")
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Merge tag 'kvm-s390-next-6.4-2' of https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD

For 6.4

Fix a long-standing flaw in x86's TDP MMU where unloading roots on a vCPU can
result in the root being freed even though the root is completely valid and
can be reused as-is (with a TLB flush).

KVM/riscv changes for 6.4

- ONE_REG interface to enable/disable SBI extensions
- Zbb extension for Guest/VM
- AIA CSR virtualization

Pull watchdog updates from Wim Van Sebroeck:

 - Add watchdog driver for StarFive JH7100 and JH7110 Soc

 - Add Rockchip RK3588 devices

 - Add Qualcom IPQ5332 APSS, QCM2290 KPSS and SM6115 SoC devices

 - Add Mediatke MT8365 and MT6735 devices

 - Watchdog-core: Always set WDOG_HW_RUNNING when starting watchdog

 - Convert watchdog platform drivers to return void on the remove
   callback

 - Convert to devm_clk_get_enabled() helpers

 - ... and other small fixes and improvements

* tag 'linux-watchdog-6.4-rc1' of git://www.linux-watchdog.org/linux-watchdog: (72 commits)
  watchdog: dw_wdt: Simplify clk management
  watchdog: dw_wdt: Fix the error handling path of dw_wdt_drv_probe()
  watchdog: starfive: Fix the warning of starfive_wdt_match
  watchdog: starfive: Fix the probe return error if PM and early_enable are both disabled
  MAINTAINERS: Add fragment for Xilinx watchdog driver
  watchdog: menz069_wdt: fix timeout setting
  watchdog: menz069_wdt: fix watchdog initialisation
  dt-bindings: watchdog: alphascale-asm9260: convert to DT schema
  watchdog: loongson1_wdt: Implement restart handler
  dt-bindings: watchdog: Document Qualcomm SM6115 watchdog
  dt-bindings: watchdog: realtek,otto-wdt: simplify requiring interrupt-names
  dt-bindings: watchdog: toshiba,visconti-wdt: simplify with unevaluatedProperties
  dt-bindings: watchdog: fsl-imx7ulp-wdt: simplify with unevaluatedProperties
  dt-bindings: watchdog: arm,sp805: drop unneeded minItems
  dt-bindings: watchdog: drop duplicated GPIO watchdog bindings
  dt-bindings: reset: Add binding for MediaTek MT6735 TOPRGU/WDT
  drivers: watchdog: Add StarFive Watchdog driver
  dt-bindings: watchdog: Add watchdog for StarFive JH7100 and JH7110
  dt-bindings: watchdog: indentation, quotes and white-space cleanup
  watchdog: ebc-c384_wdt: Mark status as orphaned
  ...

Merge tag 'drm-intel-next-fixes-2023-05-04-1' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

Add missing GPU transcoder masks for MTL and fix DSI power on sequence
for Nextbook Ares 8A. Fix GuC version corner case.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZFOskabVuN45dNaA@jlahtine-mobl.ger.corp.intel.com

Merge tag 'amd-drm-fixes-6.4-2023-05-03' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-fixes-6.4-2023-05-03:

amdgpu:
- GPU reset fixes
- Doorbell fix when resizing BARs
- Fix spurious warnings in gmc
- Locking fix for AMDGPU_SCHED IOCTL
- SR-IOV fix
- DCN 3.1.4 fix
- DCN 3.2 fix
- Fix job cleanup when CS is aborted
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230504034018.7950-1-alexander.deucher@amd.com

Merge tag 'drm-intel-next-fixes-2023-04-27' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

One cc stable for pipe source size check on SKL+
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ZEpbSG1ZOSVqzGLx@jlahtine-mobl.ger.corp.intel.com

Merge tag 'amd-drm-fixes-6.4-2023-04-26' of https://gitlab.freedesktop.org/agd5f/linux into drm-next

amd-drm-fixes-6.4-2023-04-26:

amdgpu:
- SR-IOV fixes
- DCN 3.2 fixes
- DC mclk handling fixes
- eDP fixes
- SubVP fixes
- HDCP regression fix
- DSC fixes
- DC FP fixes
- DCN 3.x fixes
- Display flickering fix when switching between vram and gtt
- Z8 power saving fix
- Fix hang when skipping modeset
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230427033012.7668-1-alexander.deucher@amd.com

Pull ceph updates from Ilya Dryomov:
 "A few filesystem improvements, with a rather nasty use-after-free fix
  from Xiubo intended for stable"

* tag 'ceph-for-6.4-rc1' of https://github.com/ceph/ceph-client:
  ceph: reorder fields in 'struct ceph_snapid_map'
  ceph: pass ino# instead of old_dentry if it's disconnected
  ceph: fix potential use-after-free bug when trimming caps
  ceph: implement writeback livelock avoidance using page tagging
  ceph: do not print the whole xattr value if it's too long

Pull 9p updates from Eric Van Hensbergen:
 "This includes a number of patches that didn't quite make the cut last
  merge window while we addressed some outstanding issues and review
  comments. It includes some new caching modes for those that only want
  readahead caches and reworks how we do writeback caching so we are not
  keeping extra references around which both causes performance problems
  and uses lots of additional resources on the server.

  It also includes a new flag to force disabling of xattrs which can
  also cause major performance issues, particularly if the underlying
  filesystem on the server doesn't support them.

  Finally it adds a couple of additional mount options to better support
  directio and enabling caches when the server doesn't support
  qid.version.

  There was one late-breaking bug report that has also been included as
  its own patch where I forgot to propagate an embarassing bit-logic fix
  to the various variations of open"

* tag '9p-6.4-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  fs/9p: Fix bit operation logic error
  fs/9p: Rework cache modes and add new options to Documentation
  fs/9p: remove writeback fid and fix per-file modes
  fs/9p: Add new mount modes
  9p: Add additional debug flags and open modes
  fs/9p: allow disable of xattr support on mount
  fs/9p: Remove unnecessary superblock flags
  fs/9p: Consolidate file operations and add readahead and writeback

Merge tag 'mm-hotfixes-stable-2023-05-03-16-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull hitfixes from Andrew Morton:
 "Five hotfixes.  Three are cc:stable, two for this -rc cycle"

* tag 'mm-hotfixes-stable-2023-05-03-16-27' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mm: change per-VMA lock statistics to be disabled by default
  MAINTAINERS: update Michal Simek's email
  mm/mempolicy: correctly update prev when policy is equal on mbind
  relayfs: fix out-of-bounds access in relay_file_read
  kasan: hw_tags: avoid invalid virt_to_page()

Pull more MM updates from Andrew Morton:

 - Some DAMON cleanups from Kefeng Wang

 - Some KSM work from David Hildenbrand, to make the PR_SET_MEMORY_MERGE
   ioctl's behavior more similar to KSM's behavior.

[ Andrew called these "final", but I suspect we'll have a series fixing
  up the fact that the last commit in the dmapools series in the
  previous pull seems to have unintentionally just reverted all the
  other commits in the same series..   - Linus ]

* tag 'mm-stable-2023-05-03-16-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mm: hwpoison: coredump: support recovery from dump_user_range()
  mm/page_alloc: add some comments to explain the possible hole in __pageblock_pfn_to_page()
  mm/ksm: move disabling KSM from s390/gmap code to KSM code
  selftests/ksm: ksm_functional_tests: add prctl unmerge test
  mm/ksm: unmerge and clear VM_MERGEABLE when setting PR_SET_MEMORY_MERGE=0
  mm/damon/paddr: fix missing folio_sz update in damon_pa_young()
  mm/damon/paddr: minor refactor of damon_pa_mark_accessed_or_deactivate()
  mm/damon/paddr: minor refactor of damon_pa_pageout()

Pull arm64 fixes from Will Deacon:
 "A few arm64 fixes that came in during the merge window for -rc1.

  The main thing is restoring the pointer authentication hwcaps, which
  disappeared during some recent refactoring

   - Fix regression in CPU erratum workaround when disabling the MMU

   - Fix detection of pointer authentication hwcaps

   - Avoid writeable, executable ELF sections in vmlinux"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: lds: move .got section out of .text
  arm64: kernel: remove SHF_WRITE|SHF_EXECINSTR from .idmap.text
  arm64: cpufeature: Fix pointer auth hwcaps
  arm64: Fix label placement in record_mmu_state()

Merge tag 'loongarch-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch updates from Huacai Chen:

 - Better backtraces for humanization

 - Relay BCE exceptions to userland as SIGSEGV

 - Provide kernel fpu functions

 - Optimize memory ops (memset/memcpy/memmove)

 - Optimize checksum and crc32(c) calculation

 - Add ARCH_HAS_FORTIFY_SOURCE selection

 - Add function error injection support

 - Add ftrace with direct call support

 - Add basic perf tools support

* tag 'loongarch-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (24 commits)
  tools/perf: Add basic support for LoongArch
  LoongArch: ftrace: Add direct call trampoline samples support
  LoongArch: ftrace: Add direct call support
  LoongArch: ftrace: Implement ftrace_find_callable_addr() to simplify code
  LoongArch: ftrace: Fix build error if DYNAMIC_FTRACE_WITH_REGS is not set
  LoongArch: ftrace: Abstract DYNAMIC_FTRACE_WITH_ARGS accesses
  LoongArch: Add support for function error injection
  LoongArch: Add ARCH_HAS_FORTIFY_SOURCE selection
  LoongArch: crypto: Add crc32 and crc32c hw acceleration
  LoongArch: Add checksum optimization for 64-bit system
  LoongArch: Optimize memory ops (memset/memcpy/memmove)
  LoongArch: Provide kernel fpu functions
  LoongArch: Relay BCE exceptions to userland as SIGSEGV with si_code=SEGV_BNDERR
  LoongArch: Tweak the BADV and CPUCFG.PRID lines in show_regs()
  LoongArch: Humanize the ESTAT line when showing registers
  LoongArch: Humanize the ECFG line when showing registers
  LoongArch: Humanize the EUEN line when showing registers
  LoongArch: Humanize the PRMD line when showing registers
  LoongArch: Humanize the CRMD line when showing registers
  LoongArch: Fix format of CSR lines during show_regs()
  ...

Pull arch/csky updates from Guo Ren:

 - Remove CPU_TLB_SIZE config

 - Prevent spurious page faults

* tag 'csky-for-linus-6.4' of https://github.com/c-sky/csky-linux:
  csky: mmu: Prevent spurious page faults
  csky: remove obsolete config CPU_TLB_SIZE

If cur_state for the powerclamp cooling device is set to the default
minimum state of 0, without setting first to cur_state > 0, this results
in NULL pointer access.

This NULL pointer access happens in the powercap core idle-inject
function idle_inject_set_duration() as there is no NULL check for
idle_inject_device pointer. This pointer must be allocated by calling
idle_inject_register() or idle_inject_register_full().

In the function powerclamp_set_cur_state(), idle_inject_device pointer
is allocated only when the cur_state > 0. But setting 0 without changing
to any other state, idle_inject_set_duration() will be called with a
NULL idle_inject_device pointer.

To address this, just return from powerclamp_set_cur_state() if the
current cooling device state is the same as the last one. Since the
power-up default cooling device state is 0, changing the state to 0
again here will return without calling idle_inject_set_duration().
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Fixes: 8526eb7f ("thermal: intel: powerclamp: Use powercap idle-inject feature")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=217386Tested-by: Risto A. Paju <teknohog@iki.fi>
Cc: 6.3+ <stable@kernel.org> # 6.3+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Remove the acpi_backlight=video quirk for Lenovo ThinkPad W530.

This was intended to help users of the (unsupported) Nvidia binary driver,
but this has been reported to cause backlight control issues for users
who have the gfx configured in hybrid (dual-GPU) mode, so drop this.

The Nvidia binary driver should call acpi_video_register_backlight()
when necessary and this has been reported to Nvidia.

Until this is fixed Nvidia binary driver users can work around this by
passing "acpi_backlight=video" on the kernel commandline (with the latest
6.1.y or newer stable series, kernels < 6.1.y don't need this).

Fixes: a5b2781d ("ACPI: video: Add acpi_backlight=video quirk for Lenovo ThinkPad W530")
Reported-by: Русев Путин <rockeraliexpress@gmail.com>
Link: https://lore.kernel.org/linux-acpi/CAK4BXn0ngZRmzx1bodAF8nmYj0PWdUXzPGHofRrsyZj8MBpcVA@mail.gmail.com/
Cc: 6.1+ <stable@vger.kernel.org> # 6.1+
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The clock rate calculus in mtk_hdmi_pll_calc() was wrong when it has
been replaced by 'div_u64'.

Fix the issue by multiplying the values in the denominator instead of
dividing them.

Fixes: 45810d48 ("phy: mediatek: add support for phy-mtk-hdmi-mt8195")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Link: https://lore.kernel.org/r/20230413-fixes-for-mt8195-hdmi-phy-v2-2-bbad62e64321@baylibre.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

The ret variable in mtk_hdmi_pll_calc() was used unitialized as reported
by the kernel test robot.

Fix the issue by removing the variable altogether and testing out the
return value of mtk_hdmi_pll_set_hw()

Fixes: 45810d48 ("phy: mediatek: add support for phy-mtk-hdmi-mt8195")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Guillaume Ranquet <granquet@baylibre.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230413-fixes-for-mt8195-hdmi-phy-v2-1-bbad62e64321@baylibre.comSigned-off-by: Vinod Koul <vkoul@kernel.org>

Fix a potential race in gmap_make_secure() and remove the last user of
follow_page() without FOLL_GET.

The old code is locking something it doesn't have a reference to, and
as explained by Jason and David in this discussion:
https://lore.kernel.org/linux-mm/Y9J4P%2FRNvY1Ztn0Q@nvidia.com/
it can lead to all kind of bad things, including the page getting
unmapped (MADV_DONTNEED), freed, reallocated as a larger folio and the
unlock_page() would target the wrong bit.
There is also another race with the FOLL_WRITE, which could race
between the follow_page() and the get_locked_pte().

The main point is to remove the last use of follow_page() without
FOLL_GET or FOLL_PIN, removing the races can be considered a nice
bonus.

Link: https://lore.kernel.org/linux-mm/Y9J4P%2FRNvY1Ztn0Q@nvidia.com/Suggested-by: Jason Gunthorpe <jgg@nvidia.com>
Fixes: 214d9bbc ("s390/mm: provide memory management functions for protected KVM guests")
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20230428092753.27913-2-imbrenda@linux.ibm.com>

On machines without the Destroy Secure Configuration Fast UVC, the
topmost level of page tables is set aside and freed asynchronously
as last step of the asynchronous teardown.

Each gmap has a host_to_guest radix tree mapping host (userspace)
addresses (with 1M granularity) to gmap segment table entries (pmds).

If a guest is smaller than 2GB, the topmost level of page tables is the
segment table (i.e. there are only 2 levels). Replacing it means that
the pointers in the host_to_guest mapping would become stale and cause
all kinds of nasty issues.

This patch fixes the issue by disallowing asynchronous teardown for
guests with only 2 levels of page tables. Userspace should (and already
does) try using the normal destroy if the asynchronous one fails.

Update s390_replace_asce so it refuses to replace segment type ASCEs.
This is still needed in case the normal destroy VM fails.

Fixes: fb491d55 ("KVM: s390: pv: asynchronous destroy for reboot")
Reviewed-by: Marc Hartmayer <mhartmay@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Message-Id: <20230421085036.52511-2-imbrenda@linux.ibm.com>

Once command submission failed due to userptr invalidation in
amdgpu_cs_submit, legacy code will perform cleanup of scheduler
job. However, it's not needed at all, as former commit has integrated
job cleanup stuff into amdgpu_job_free. Otherwise, because of double
free, a NULL pointer dereference will occur in such scenario.

Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/2457
Fixes: f7d66fb2 ("drm/amdgpu: cleanup scheduler job initialization v2")
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

[Why]
Reading pipe_fuses from register may have invalid bits set, which may
 affect the num_pipes erroneously.

[How]
Add read_pipes_fuses() call and filter bits based on expected number
 of pipes.
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Samson Tam <Samson.Tam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org # 6.1.x

[Why & How]
Previous Z8 watermark values were causing flickering and OTC underflow.
Updating Z8 watermark values based on the measurement.
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Acked-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Leo Chen <sancchen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
This WPTR_POLL_ENABLE is a hardware contigious polling which will cause
FCLK and UCLK to keep on a high level.
Mostly its case can be covered by F32_WPTR_POLL_ENABLE which polls by
firmware.
So to save power, SR-IOV also needs to disable this bit
Signed-off-by: Horace Chen <horace.chen@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

mgr->ctx_handles should be protected by mgr->lock.

v2: improve commit message
v3: add a Fixes tag
Signed-off-by: Chia-I Wu <olvaffe@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Fixes: 52c6a62c ("drm/amdgpu: add interface for editing a foreign process's priority v3")
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

As made mention of in commit 08c677cb ("drm/amdgpu: fix
amdgpu_irq_put call trace in gmc_v10_0_hw_fini") and commit 13af5561
("drm/amdgpu: fix amdgpu_irq_put call trace in gmc_v11_0_hw_fini"). It
is meaningless to call amdgpu_irq_put() for gmc.ecc_irq. So, remove it
from gmc_v9_0_hw_fini().

Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2522
Fixes: 3029c855d79f ("drm/amdgpu: Fix desktop freezed after gpu-reset")
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

The gmc.ecc_irq is enabled by firmware per IFWI setting,
and the host driver is not privileged to enable/disable
the interrupt. So, it is meaningless to use the amdgpu_irq_put
function in gmc_v10_0_hw_fini, which also leads to the call
trace.

[   82.340264] Call Trace:
[   82.340265]  <TASK>
[   82.340269]  gmc_v10_0_hw_fini+0x83/0xa0 [amdgpu]
[   82.340447]  gmc_v10_0_suspend+0xe/0x20 [amdgpu]
[   82.340623]  amdgpu_device_ip_suspend_phase2+0x127/0x1c0 [amdgpu]
[   82.340789]  amdgpu_device_ip_suspend+0x3d/0x80 [amdgpu]
[   82.340955]  amdgpu_device_pre_asic_reset+0xdd/0x2b0 [amdgpu]
[   82.341122]  amdgpu_device_gpu_recover.cold+0x4dd/0xbb2 [amdgpu]
[   82.341359]  amdgpu_debugfs_reset_work+0x4c/0x70 [amdgpu]
[   82.341529]  process_one_work+0x21d/0x3f0
[   82.341535]  worker_thread+0x1fa/0x3c0
[   82.341538]  ? process_one_work+0x3f0/0x3f0
[   82.341540]  kthread+0xff/0x130
[   82.341544]  ? kthread_complete_and_exit+0x20/0x20
[   82.341547]  ret_from_fork+0x22/0x30
Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2522
Fixes: c8b5a95b ("drm/amdgpu: Fix desktop freezed after gpu-reset")
Cc: stable@vger.kernel.org

The gmc.ecc_irq is enabled by firmware per IFWI setting,
and the host driver is not privileged to enable/disable
the interrupt. So, it is meaningless to use the amdgpu_irq_put
function in gmc_v11_0_hw_fini, which also leads to the call
trace.

[  102.980303] Call Trace:
[  102.980303]  <TASK>
[  102.980304]  gmc_v11_0_hw_fini+0x54/0x90 [amdgpu]
[  102.980357]  gmc_v11_0_suspend+0xe/0x20 [amdgpu]
[  102.980409]  amdgpu_device_ip_suspend_phase2+0x240/0x460 [amdgpu]
[  102.980459]  amdgpu_device_ip_suspend+0x3d/0x80 [amdgpu]
[  102.980520]  amdgpu_device_pre_asic_reset+0xd9/0x490 [amdgpu]
[  102.980573]  amdgpu_device_gpu_recover.cold+0x548/0xce6 [amdgpu]
[  102.980687]  amdgpu_debugfs_reset_work+0x4c/0x70 [amdgpu]
[  102.980740]  process_one_work+0x21f/0x3f0
[  102.980741]  worker_thread+0x200/0x3e0
[  102.980742]  ? process_one_work+0x3f0/0x3f0
[  102.980743]  kthread+0xfd/0x130
[  102.980743]  ? kthread_complete_and_exit+0x20/0x20
[  102.980744]  ret_from_fork+0x22/0x30
Signed-off-by: Horatio Zhang <Hongkun.Zhang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-by: Guchun Chen <guchun.chen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2522
Fixes: c8b5a95b ("drm/amdgpu: Fix desktop freezed after gpu-reset")
Cc: stable@vger.kernel.org

[Why]
The selfring doorbell aperture will change when resize FB
BAR successfully during gmc sw init, we should reorder
the sequence of enabling doorbell selfring aperture.

[How]
Move enable_doorbell_selfring_aperture from *_common_hw_init
to *_common_late_init.

This fixes the potential issue that GPU ring its own
doorbell when this device is in translated mode when
iommu is on.

v2: Remove *_enable_doorbell_aperture functions (Christian)
v3: Add comments to note that why we need enable doorbell
    selfring late (Christian)
Signed-off-by: Shane Xiao <shane.xiao@amd.com>
Signed-off-by: Aaron Liu <aaron.liu@amd.com>
Tested-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Christian K�nig <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Below call trace and errors are observed when reloading
amdgpu driver with the module parameter reset_method=3.

It should do a default reset when loading or reloading the
driver, regardless of the module parameter reset_method.

v2: add comments inside and modify commit messages.

[  +2.180243] [drm] psp gfx command ID_LOAD_TOC(0x20) failed
and response status is (0x0)
[  +0.000011] [drm:psp_hw_start [amdgpu]] *ERROR* Failed to load toc
[  +0.000890] [drm:psp_hw_start [amdgpu]] *ERROR* PSP tmr init failed!
[  +0.020683] [drm:amdgpu_fill_buffer [amdgpu]] *ERROR* Trying to
clear memory with ring turned off.
[  +0.000003] RIP: 0010:amdgpu_bo_release_notify+0x1ef/0x210 [amdgpu]
[  +0.000004] Call Trace:
[  +0.000003]  <TASK>
[  +0.000008]  ttm_bo_release+0x2c4/0x330 [amdttm]
[  +0.000026]  amdttm_bo_put+0x3c/0x70 [amdttm]
[  +0.000020]  amdgpu_bo_free_kernel+0xe6/0x140 [amdgpu]
[  +0.000728]  psp_v11_0_ring_destroy+0x34/0x60 [amdgpu]
[  +0.000826]  psp_hw_init+0xe7/0x2f0 [amdgpu]
[  +0.000813]  amdgpu_device_fw_loading+0x1ad/0x2d0 [amdgpu]
[  +0.000731]  amdgpu_device_init.cold+0x108e/0x2002 [amdgpu]
[  +0.001071]  ? do_pci_enable_device+0xe1/0x110
[  +0.000011]  amdgpu_driver_load_kms+0x1a/0x160 [amdgpu]
[  +0.000729]  amdgpu_pci_probe+0x179/0x3a0 [amdgpu]
Signed-off-by: lyndonli <Lyndon.Li@amd.com>
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Before this change, sienna_cichlid_get_reset_handler will always
return NULL, although the module parameter reset_method is 3
when loading amdgpu driver.
Signed-off-by: lyndonli <Lyndon.Li@amd.com>
Signed-off-by: Yunxiang Li <Yunxiang.Li@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Pull parisc updates from Helge Deller:
 "Two important fixes in here:

   - The argument pointer register was wrong when calling 64-bit
     firmware functions, which may cause random memory corruption or
     crashes.

   - Ensure page alignment in cache flush functions, otherwise not all
     memory might get flushed.

  The rest are cleanups (mmap implementation, panic path) and usual
  smaller updates.

  Summary:

   - Calculate correct argument pointer in real64_call_asm()

   - Cleanup mmap implementation regarding color alignment (John David
     Anglin)

   - Spinlock fixes in panic path (Guilherme G. Piccoli)

   - build doc update for parisc64 (Randy Dunlap)

   - Ensure page alignment in flush functions"

* tag 'parisc-for-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Fix argument pointer in real64_call_asm()
  parisc: Cleanup mmap implementation regarding color alignment
  parisc: Drop HP-UX constants and structs from grfioctl.h
  parisc: Ensure page alignment in flush functions
  parisc: Replace regular spinlock with spin_trylock on panic path
  parisc: update kbuild doc. aliases for parisc64
  parisc: Limit amount of kgdb breakpoints on parisc

Pull modules fix from Luis Chamberlain:
 "One fix by Arnd far for modules which came in after the first pull
  request.

  The issue was found as part of some late compile tests with 0-day. I
  take it 0-day does some secondary late builds with after some initial
  ones"

* tag 'modules-6.4-rc1-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
  module: include internal.h in module/dups.c