- 02 Aug, 2024 14 commits
-
-
Jakub Kicinski authored
We re-define values of enum netdev_priv_flags as preprocessor macros with the same name. I guess this was done to avoid breaking out of tree modules which may use #ifdef X for kernel compatibility? Commit 7aa98047 ("net: move net_device priv_flags out from UAPI") which added the enum doesn't say. In any case, the flags with defines are quite old now, and defines for new flags don't get added. OOT drivers have to resort to code greps for compat detection, anyway. Let's delete these defines, save LoC, help LXR link to the right place. Reviewed-by:
Simon Horman <horms@kernel.org> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Link: https://patch.msgid.link/20240801163401.378723-1-kuba@kernel.orgSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
David S. Miller authored
Radhey Shyam Pandey says: ==================== net: axienet: Fix coding style issues This patchset replace all occurences of (1<<x) by BIT(x) to get rid of checkpatch.pl "CHECK" output "Prefer using the BIT macro". It also removes unnecessary ftrace-like logging, add missing blank line after declaration and remove unnecessary parentheses around 'ndev->mtu <= XAE_JUMBO_MTU' and 'ndev->mtu > XAE_MTU'. Changes for v2: - Split each coding style change into separate patch. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Radhey Shyam Pandey authored
Remove unnecessary parentheses around 'ndev->mtu <= XAE_JUMBO_MTU' and 'ndev->mtu > XAE_MTU'. Reported by checkpatch. CHECK: Unnecessary parentheses around 'ndev->mtu > XAE_MTU' + if ((ndev->mtu > XAE_MTU) && + (ndev->mtu <= XAE_JUMBO_MTU)) { CHECK: Unnecessary parentheses around 'ndev->mtu <= XAE_JUMBO_MTU' + if ((ndev->mtu > XAE_MTU) && + (ndev->mtu <= XAE_JUMBO_MTU)) { Signed-off-by:Radhey Shyam Pandey <radhey.shyam.pandey@amd.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
Radhey Shyam Pandey authored
remove unnecessary ftrace-like logging. Also fixes below checkpatch WARNING. WARNING: Unnecessary ftrace-like logging - prefer using ftrace + dev_dbg(&ndev->dev, "%s\n", __func__); Signed-off-by:
-
Radhey Shyam Pandey authored
Add missing blank line after declaration. Fixes below checkpatch warnings. WARNING: Missing a blank line after declarations + struct sockaddr *addr = p; + axienet_set_mac_address(ndev, addr->sa_data); WARNING: Missing a blank line after declarations + struct axienet_local *lp = netdev_priv(ndev); + disable_irq(lp->tx_irq); Signed-off-by:
-
Appana Durga Kedareswara Rao authored
Replace all occurences of (1<<x) by BIT(x) to get rid of checkpatch.pl "CHECK" output "Prefer using the BIT macro". Signed-off-by:
Appana Durga Kedareswara Rao <appana.durga.rao@xilinx.com> Signed-off-by:
-
David S. Miller authored
Luigi Leonardi says: ==================== vsock: avoid queuing on intermediate queue if possible This series introduces an optimization for vsock/virtio to reduce latency and increase the throughput: When the guest sends a packet to the host, and the intermediate queue (send_pkt_queue) is empty, if there is enough space, the packet is put directly in the virtqueue. v3->v4 While running experiments on fio with 64B payload, I realized that there was a mistake in my fio configuration, so I re-ran all the experiments and now the latency numbers are indeed lower with the patch applied. I also noticed that I was kicking the host without the lock. - Fixed a configuration mistake on fio and re-ran all experiments. - Fio latency measurement using 64B payload. - virtio_transport_send_skb_fast_path sends kick with the tx_lock acquired - Addressed all minor style changes requested by maintainer. - Rebased on latest net-next - Link to v3: https://lore.kernel.org/r/20240711-pinna-v3-0-697d4164fe80@outlook.com v2->v3 - Performed more experiments using iperf3 using multiple streams - Handling of reply packets removed from virtio_transport_send_skb, as is needed just by the worker. - Removed atomic_inc/atomic_sub when queuing directly to the vq. - Introduced virtio_transport_send_skb_fast_path that handles the steps for sending on the vq. - Fixed a missing mutex_unlock in error path. - Changed authorship of the second commit - Rebased on latest net-next v1->v2 In this v2 I replaced a mutex_lock with a mutex_trylock because it was insidea RCU critical section. I also added a check on tx_run, so if the module is being removed the packet is not queued. I'd like to thank Stefano for reporting the tx_run issue. Applied all Stefano's suggestions: - Minor code style changes - Minor commit text rewrite Performed more experiments: - Check if all the packets go directly to the vq (Matias' suggestion) - Used iperf3 to see if there is any improvement in overall throughput from guest to host - Pinned the vhost process to a pCPU. - Run fio using 512B payload Rebased on latest net-next ==================== Signed-off-by:
-
Luigi Leonardi authored
Introduce two tests, one for SOCK_STREAM and one for SOCK_SEQPACKET, which use SIOCOUTQ ioctl to check that the number of unsent bytes is zero after delivering a packet. vsock_connect and vsock_accept are no longer static: this is to create more generic tests, allowing code to be reused for SEQPACKET and STREAM. Signed-off-by:
Luigi Leonardi <luigi.leonardi@outlook.com> Reviewed-by:
Stefano Garzarella <sgarzare@redhat.com> Signed-off-by:
-
Luigi Leonardi authored
Introduce support for virtio_transport_unsent_bytes ioctl for virtio_transport, vhost_vsock and vsock_loopback. For all transports the unsent bytes counter is incremented in virtio_transport_get_credit. In virtio_transport (G2H) and in vhost-vsock (H2G) the counter is decremented when the skbuff is consumed. In vsock_loopback the same skbuff is passed from the transmitter to the receiver, so the counter is decremented before queuing the skbuff to the receiver. Signed-off-by:
-
Luigi Leonardi authored
Add support for ioctl(s) in AF_VSOCK. The only ioctl available is SIOCOUTQ/TIOCOUTQ, which returns the number of unsent bytes in the socket. This information is transport-specific and is delegated to them using a callback. Suggested-by:
Daan De Meyer <daan.j.demeyer@gmail.com> Signed-off-by:
-
Rob Herring (Arm) authored
Use of_property_read_bool() to read boolean properties rather than of_find_property(). This is part of a larger effort to remove callers of of_find_property() and similar functions. of_find_property() leaks the DT struct property and data pointers which is a problem for dynamically allocated nodes which may be freed. Signed-off-by:
Rob Herring (Arm) <robh@kernel.org> Reviewed-by:
MD Danish Anwar <danishanwar@ti.com> Link: https://patch.msgid.link/20240731191601.1714639-2-robh@kernel.orgSigned-off-by:
-
Rob Herring (Arm) authored
Replace of_get_property() with the type specific of_property_count_u32_elems() to get the property length. This is part of a larger effort to remove callers of of_get_property() and similar functions. of_get_property() leaks the DT property data pointer which is a problem for dynamically allocated nodes which may be freed. Signed-off-by:
-
Rob Herring (Arm) authored
The check for "leds" and "gpio-controller" both being present is never true because "leds" is a node, not a property. This could be fixed with a check for child node, but there's really no need for the kernel to validate a DT. Just continue ignoring the LEDs if GPIOs are present. Signed-off-by:
-
John Wang authored
When executing ioctl to allocate tags, if the peer address is 0, mctp_alloc_local_tag now replaces it with 0xff. However, during tag dropping, this replacement is not performed, potentially causing the key not to be dropped as expected. Signed-off-by:
John Wang <wangzhiqiang02@ieisystem.com> Reviewed-by:
Jeremy Kerr <jk@codeconstruct.com.au> Link: https://patch.msgid.link/20240730084636.184140-1-wangzhiqiang02@ieisystem.comSigned-off-by:
-
- 01 Aug, 2024 26 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski authored
Cross-merge networking fixes after downstream PR. No conflicts or adjacent changes. Link: https://patch.msgid.link/20240801131917.34494-1-pabeni@redhat.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from wireless, bleutooth, BPF and netfilter. Current release - regressions: - core: drop bad gso csum_start and offset in virtio_net_hdr - wifi: mt76: fix null pointer access in mt792x_mac_link_bss_remove - eth: tun: add missing bpf_net_ctx_clear() in do_xdp_generic() - phy: aquantia: only poll GLOBAL_CFG regs on aqr113, aqr113c and aqr115c Current release - new code bugs: - smc: prevent UAF in inet_create() - bluetooth: btmtk: fix kernel crash when entering btmtk_usb_suspend - eth: bnxt: reject unsupported hash functions Previous releases - regressions: - sched: act_ct: take care of padding in struct zones_ht_key - netfilter: fix null-ptr-deref in iptable_nat_table_init(). - tcp: adjust clamping window for applications specifying SO_RCVBUF Previous releases - always broken: - ethtool: rss: small fixes to spec and GET - mptcp: - fix signal endpoint re-add - pm: fix backup support in signal endpoints - wifi: ath12k: fix soft lockup on suspend - eth: bnxt_en: fix RSS logic in __bnxt_reserve_rings() - eth: ice: fix AF_XDP ZC timeout and concurrency issues - eth: mlx5: - fix missing lock on sync reset reload - fix error handling in irq_pool_request_irq" * tag 'net-6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (76 commits) mptcp: fix duplicate data handling mptcp: fix bad RCVPRUNED mib accounting ipv6: fix ndisc_is_useropt() handling for PIO igc: Fix double reset adapter triggered from a single taprio cmd net: MAINTAINERS: Demote Qualcomm IPA to "maintained" net: wan: fsl_qmc_hdlc: Discard received CRC net: wan: fsl_qmc_hdlc: Convert carrier_lock spinlock to a mutex net/mlx5e: Add a check for the return value from mlx5_port_set_eth_ptys net/mlx5e: Fix CT entry update leaks of modify header context net/mlx5e: Require mlx5 tc classifier action support for IPsec prio capability net/mlx5: Fix missing lock on sync reset reload net/mlx5: Lag, don't use the hardcoded value of the first port net/mlx5: DR, Fix 'stack guard page was hit' error in dr_rule net/mlx5: Fix error handling in irq_pool_request_irq net/mlx5: Always drain health in shutdown callback net: Add skbuff.h to MAINTAINERS r8169: don't increment tx_dropped in case of NETDEV_TX_BUSY netfilter: iptables: Fix potential null-ptr-deref in ip6table_nat_table_init(). netfilter: iptables: Fix null-ptr-deref in iptable_nat_table_init(). net: drop bad gso csum_start and offset in virtio_net_hdr ... -
Simon Horman authored
Since commit f946270d ("ethtool: netlink: always pass genl_info to .prepare_data") the info argument of prepare_data callbacks is never NULL. Remove checks present in callback implementations. Link: https://lore.kernel.org/netdev/20240703121237.3f8b9125@kernel.org/Signed-off-by:
-
Yue Haibing authored
Commit f4f943c9 ("RDS: IB: ack more receive completions to improve performance") removed rds_ib_recv_tasklet_fn() implementation but not the declaration. And commit ec16227e ("RDS/IB: Infiniband transport") declared but never implemented other functions. Signed-off-by:
Yue Haibing <yuehaibing@huawei.com> Reviewed-by:
Allison Henderson <allison.henderson@oracle.com> Link: https://patch.msgid.link/20240731063630.3592046-1-yuehaibing@huawei.comSigned-off-by:
-
Daniel Golle authored
Clocks for SerDes and PHY are going to be handled by standalone drivers for each of those hardware components. Drop them from the Ethernet driver. The clocks which are being removed for this patch are responsible for the for the SerDes PCS and PHYs used for the 2nd and 3rd MAC which are anyway not yet supported. Hence backwards compatibility is not an issue. Signed-off-by:
Daniel Golle <daniel@makrotopia.org> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Link: https://patch.msgid.link/b5faaf69b5c6e3e155c64af03706c3c423c6a1c9.1722335682.git.daniel@makrotopia.orgSigned-off-by:
-
Anand Khoje authored
In non FLR context, at times CX-5 requests release of ~8 million FW pages. This needs humongous number of cmd mailboxes, which to be released once the pages are reclaimed. Release of humongous number of cmd mailboxes is consuming cpu time running into many seconds. Which with non preemptible kernels is leading to critical process starving on that cpu’s RQ. On top of it, the FW does not use all the mailbox messages as it has a limit of releasing 50K pages at once per MLX5_CMD_OP_MANAGE_PAGES + MLX5_PAGES_TAKE device command. Hence, the allocation of these many mailboxes is extra and adds unnecessary overhead. To alleviate this, this change restricts the total number of pages a worker will try to reclaim to maximum 50K pages in one go. Our tests have shown significant benefit of this change in terms of time consumed by dma_pool_free(). During a test where an event was raised by HCA to release 1.3 Million pages, following observations were made: - Without this change: Number of mailbox messages allocated was around 20K, to accommodate the DMA addresses of 1.3 million pages. The average time spent by dma_pool_free() to free the DMA pool is between 16 usec to 32 usec. value ------------- Distribution ------------- count 256 | 0 512 |@ 287 1024 |@@@ 1332 2048 |@ 656 4096 |@@@@@ 2599 8192 |@@@@@@@@@@ 4755 16384 |@@@@@@@@@@@@@@@ 7545 32768 |@@@@@ 2501 65536 | 0 - With this change: Number of mailbox messages allocated was around 800; this was to accommodate DMA addresses of only 50K pages. The average time spent by dma_pool_free() to free the DMA pool in this case lies between 1 usec to 2 usec. value ------------- Distribution ------------- count 256 | 0 512 |@@@@@@@@@@@@@@@@@@ 346 1024 |@@@@@@@@@@@@@@@@@@@@@@ 435 2048 | 0 4096 | 0 8192 | 1 16384 | 0 Signed-off-by:Anand Khoje <anand.a.khoje@oracle.com> Reviewed-by:
Leon Romanovsky <leonro@nvidia.com> Reviewed-by:
Zhu Yanjun <yanjun.zhu@linux.dev> Acked-by:
Saeed Mahameed <saeedm@nvidia.com> Link: https://patch.msgid.link/20240730073634.114407-1-anand.a.khoje@oracle.comSigned-off-by:
-
Paolo Abeni authored
Matthieu Baerts says: ==================== mptcp: fix duplicate data handling In some cases, the subflow-level's copied_seq counter was incorrectly increased, leading to an unexpected subflow reset. Patch 1/2 fixes the RCVPRUNED MIB counter that was attached to the wrong event since its introduction in v5.14, backported to v5.11. Patch 2/2 fixes the copied_seq counter issues, is present since v5.10. Signed-off-by:
Matthieu Baerts (NGI0) <matttbe@kernel.org> ==================== Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-dup-data-v1-0-bde833fa628a@kernel.orgSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Paolo Abeni authored
When a subflow receives and discards duplicate data, the mptcp stack assumes that the consumed offset inside the current skb is zero. With multiple subflows receiving data simultaneously such assertion does not held true. As a result the subflow-level copied_seq will be incorrectly increased and later on the same subflow will observe a bad mapping, leading to subflow reset. Address the issue taking into account the skb consumed offset in mptcp_subflow_discard_data(). Fixes: 04e4cd4f ("mptcp: cleanup mptcp_subflow_discard_data()") Cc: stable@vger.kernel.org Link: https://github.com/multipath-tcp/mptcp_net-next/issues/501Signed-off-by:
Mat Martineau <martineau@kernel.org> Signed-off-by:
-
Paolo Abeni authored
Since its introduction, the mentioned MIB accounted for the wrong event: wake-up being skipped as not-needed on some edge condition instead of incoming skb being dropped after landing in the (subflow) receive queue. Move the increment in the correct location. Fixes: ce599c51 ("mptcp: properly account bulk freed memory") Cc: stable@vger.kernel.org Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfPaolo Abeni authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: Fix a possible null-ptr-deref sometimes triggered by iptables-restore at boot time. Register iptables {ipv4,ipv6} nat table pernet in first place to fix this issue. Patch #1 and #2 from Kuniyuki Iwashima. netfilter pull request 24-07-31 * tag 'nf-24-07-31' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: iptables: Fix potential null-ptr-deref in ip6table_nat_table_init(). netfilter: iptables: Fix null-ptr-deref in iptable_nat_table_init(). ==================== Link: https://patch.msgid.link/20240731213046.6194-1-pablo@netfilter.orgSigned-off-by: -
Maciej Żenczykowski authored
The current logic only works if the PIO is between two other ND user options. This fixes it so that the PIO can also be either before or after other ND user options (for example the first or last option in the RA). side note: there's actually Android tests verifying a portion of the old broken behaviour, so: https://android-review.googlesource.com/c/kernel/tests/+/3196704 fixes those up. Cc: Jen Linkova <furry@google.com> Cc: Lorenzo Colitti <lorenzo@google.com> Cc: Patrick Rohr <prohr@google.com> Cc: David Ahern <dsahern@kernel.org> Cc: YOSHIFUJI Hideaki / 吉藤英明 <yoshfuji@linux-ipv6.org> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by:
Maciej Żenczykowski <maze@google.com> Fixes: 048c796b ("ipv6: adjust ndisc_is_useropt() to also return true for PIO") Link: https://patch.msgid.link/20240730001748.147636-1-maze@google.comSigned-off-by:
-
Breno Leitao authored
This patch modifies the skb_unref function to skip the early return optimization when CONFIG_DEBUG_NET is enabled. The change ensures that the reference count decrement always occurs in debug builds, allowing for more thorough checking of SKB reference counting. Previously, when the SKB's reference count was 1 and CONFIG_DEBUG_NET was not set, the function would return early after a memory barrier (smp_rmb()) without decrementing the reference count. This optimization assumes it's safe to proceed with freeing the SKB without the overhead of an atomic decrement from 1 to 0. With this change: - In non-debug builds (CONFIG_DEBUG_NET not set), behavior remains unchanged, preserving the performance optimization. - In debug builds (CONFIG_DEBUG_NET set), the reference count is always decremented, even when it's 1, allowing for consistent behavior and potentially catching subtle SKB management bugs. This modification enhances debugging capabilities for networking code without impacting performance in production kernels. It helps kernel developers identify and diagnose issues related to SKB management and reference counting in the network stack. Cc: Chris Mason <clm@fb.com> Suggested-by:
Breno Leitao <leitao@debian.org> Reviewed-by:
Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20240729104741.370327-1-leitao@debian.orgSigned-off-by:
-
Jakub Kicinski authored
Allen Pais says: ==================== ethernet: Convert from tasklet to BH workqueue [part] The only generic interface to execute asynchronously in the BH context is tasklet; however, it's marked deprecated and has some design flaws. To replace tasklets, BH workqueue support was recently added. A BH workqueue behaves similarly to regular workqueues except that the queued work items are executed in the BH context. This patch converts a few drivers in drivers/ethernet/* from tasklet to BH workqueue. The next set will be sent out after the next -rc is out. v2: https://lore.kernel.org/20240621183947.4105278-1-allen.lkml@gmail.com v1: https://lore.kernel.org/20240507190111.16710-2-apais@linux.microsoft.com ==================== Link: https://patch.msgid.link/20240730183403.4176544-1-allen.lkml@gmail.comSigned-off-by:
-
Allen Pais authored
Migrate tasklet APIs to the new bottom half workqueue mechanism. It replaces all occurrences of tasklet usage with the appropriate workqueue APIs throughout the macb driver. This transition ensures compatibility with the latest design and enhances performance. Signed-off-by:
Allen Pais <allen.lkml@gmail.com> Link: https://patch.msgid.link/20240730183403.4176544-5-allen.lkml@gmail.comSigned-off-by:
-
Allen Pais authored
Migrate tasklet APIs to the new bottom half workqueue mechanism. It replaces all occurrences of tasklet usage with the appropriate workqueue APIs throughout the cnic driver. This transition ensures compatibility with the latest design and enhances performance. Signed-off-by:
-
Allen Pais authored
Migrate tasklet APIs to the new bottom half workqueue mechanism. It replaces all occurrences of tasklet usage with the appropriate workqueue APIs throughout the xgbe driver. This transition ensures compatibility with the latest design and enhances performance. Signed-off-by:
-
Allen Pais authored
Migrate tasklet APIs to the new bottom half workqueue mechanism. It replaces all occurrences of tasklet usage with the appropriate workqueue APIs throughout the alteon driver. This transition ensures compatibility with the latest design and enhances performance. Signed-off-by:
-
Faizal Rahim authored
Following the implementation of "igc: Add TransmissionOverrun counter" patch, when a taprio command is triggered by user, igc processes two commands: TAPRIO_CMD_REPLACE followed by TAPRIO_CMD_STATS. However, both commands unconditionally pass through igc_tsn_offload_apply() which evaluates and triggers reset adapter. The double reset causes issues in the calculation of adapter->qbv_count in igc. TAPRIO_CMD_REPLACE command is expected to reset the adapter since it activates qbv. It's unexpected for TAPRIO_CMD_STATS to do the same because it doesn't configure any driver-specific TSN settings. So, the evaluation in igc_tsn_offload_apply() isn't needed for TAPRIO_CMD_STATS. To address this, commands parsing are relocated to igc_tsn_enable_qbv_scheduling(). Commands that don't require an adapter reset will exit after processing, thus avoiding igc_tsn_offload_apply(). Fixes: d3750076 ("igc: Add TransmissionOverrun counter") Signed-off-by:
Faizal Rahim <faizal.abdul.rahim@linux.intel.com> Acked-by:
Vinicius Costa Gomes <vinicius.gomes@intel.com> Reviewed-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by:
Mor Bar-Gabay <morx.bar.gabay@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://patch.msgid.link/20240730173304.865479-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Jakub Kicinski authored
Petr Machata says: ==================== mlxsw: core_thermal: Small cleanups Ido Schimmel says: Clean up various issues which I noticed while addressing feedback on a different patchset. ==================== Link: https://patch.msgid.link/cover.1722345311.git.petrm@nvidia.comSigned-off-by:
-
Ido Schimmel authored
The name of a thermal zone device cannot be longer than 19 characters ('THERMAL_NAME_LENGTH - 1'). The format string 'mlxsw-lc%d-module%d' can exceed this limitation if the maximum number of line cards cannot be represented using a single digit and the maximum number of transceiver modules cannot be represented using two digits. This is not the case with current systems nor future ones. Therefore, increase the size of the result buffer beyond 'THERMAL_NAME_LENGTH' and suppress the following build warning [1]. If this limitation is ever exceeded, we will know about it since the thermal core validates the thermal device's name during registration. [1] drivers/net/ethernet/mellanox/mlxsw/core_thermal.c: In function ‘mlxsw_thermal_modules_init.part.0’: drivers/net/ethernet/mellanox/mlxsw/core_thermal.c:418:70: error: ‘%d’ directive output may be truncated writing between 1 and 3 bytes into a region of size between 2 and 4 [-Werror=format-truncation=] 418 | snprintf(tz_name, sizeof(tz_name), "mlxsw-lc%d-module%d", | ^~ In function ‘mlxsw_thermal_module_tz_init’, inlined from ‘mlxsw_thermal_module_init’ at drivers/net/ethernet/mellanox/mlxsw/core_thermal.c:465:9, inlined from ‘mlxsw_thermal_modules_init.part.0’ at drivers/net/ethernet/mellanox/mlxsw/core_thermal.c:500:9: drivers/net/ethernet/mellanox/mlxsw/core_thermal.c:418:52: note: directive argument in the range [1, 256] 418 | snprintf(tz_name, sizeof(tz_name), "mlxsw-lc%d-module%d", | ^~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/mellanox/mlxsw/core_thermal.c:418:17: note: ‘snprintf’ output between 18 and 22 bytes into a destination of size 20 418 | snprintf(tz_name, sizeof(tz_name), "mlxsw-lc%d-module%d", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 419 | module_tz->slot_index, module_tz->module + 1); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by:Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Vadim Pasternak <vadimp@nvidia.com> Signed-off-by:
Petr Machata <petrm@nvidia.com> Reviewed-by:
Wojciech Drewek <wojciech.drewek@intel.com> Link: https://patch.msgid.link/583a70c6dbe75e6bf0c2c58abbb3470a860d2dc3.1722345311.git.petrm@nvidia.comSigned-off-by:
-
Ido Schimmel authored
Setting both pointers to NULL is unnecessary since the code never checks whether these pointers are NULL or not. Remove the assignments. Signed-off-by:
-
Ido Schimmel authored
mlxsw_thermal_module_fini() cannot be invoked with a thermal module which is NULL or which is not associated with a thermal zone, so remove these checks. Signed-off-by:
-
Ido Schimmel authored
During rollback, instead of calling mlxsw_thermal_module_fini() for all the modules, only call it for modules that were successfully initialized. This is not a bug fix since mlxsw_thermal_module_fini() first checks that the module was initialized. Signed-off-by:
-
Ido Schimmel authored
mlxsw_thermal_module_fini() de-initializes the module's thermal zone, but mlxsw_thermal_module_init() does not initialize it. Make both functions symmetric by moving the initialization of the module's thermal zone to mlxsw_thermal_module_init(). Signed-off-by:
-
Ido Schimmel authored
'dev' and 'core' arguments are not used by mlxsw_thermal_module_init(). Remove them. Signed-off-by:
-
Ido Schimmel authored
There is no need to traverse the same array twice. Do it once by folding both loops into one. Signed-off-by:
-
