- 18 Dec, 2018 31 commits
-
-
Leo Yan authored
TRACE_ON element is used at the beginning of trace, it also can be appeared in the middle of trace data to indicate discontinuity; for example, it's possible to see multiple TRACE_ON elements in the trace stream if the trace is being limited by address range filtering. Furthermore, except TRACE_ON element is for discontinuity, NO_SYNC and EO_TRACE also can be used to indicate discontinuity, though they are used for different scenarios for which the trace is interrupted. This patch renames sample type CS_ETM_TRACE_ON to CS_ETM_DISCONTINUITY, firstly the new name describes more closely the purpose of the packet; secondly this is a preparation for other output elements which also cause the trace discontinuity thus they can share the same one packet type. Signed-off-by:
Leo Yan <leo.yan@linaro.org> Reviewed-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Robert Walker <robert.walker@arm.com> Cc: coresight@lists.linaro.org Cc: linux-arm-kernel@lists.infradead.org Link: http://lkml.kernel.org/r/1544513908-16805-6-git-send-email-leo.yan@linaro.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Leo Yan authored
The values in enumeration cs_etm_sample_type are defined with setting bit N for each packet type, this is not suggested in the usual case. This patch refactor cs_etm_sample_type by converting from bit shifting values to continuous numbers. Signed-off-by:
-
Leo Yan authored
cs_etm_decoder::trace_on is being assigned when TRACE_ON or NO_SYNC element is coming, but it is never used hence it is redundant and can be removed. So let's remove 'trace_on' field from cs_etm_decoder struct. Suggested-by:
-
Leo Yan authored
At the end of trace buffer handling, function cs_etm__flush() is invoked to flush any remaining branch stack entries. As a side effect, it also generates branch sample, because the 'etmq->packet' doesn't contains any new coming packet but point to one stale packet after packets swapping, so it wrongly makes synthesize branch samples with stale packet info. We could review below detailed flow which causes issue: Packet1: start_addr=0xffff000008b1fbf0 end_addr=0xffff000008b1fbfc Packet2: start_addr=0xffff000008b1fb5c end_addr=0xffff000008b1fb6c step 1: cs_etm__sample(): sample: ip=(0xffff000008b1fbfc-4) addr=0xffff000008b1fb5c step 2: flush packet in cs_etm__run_decoder(): cs_etm__run_decoder() `-> err = cs_etm__flush(etmq, false); sample: ip=(0xffff000008b1fb6c-4) addr=0xffff000008b1fbf0 Packet1 and packet2 are two continuous packets, when packet2 is the new coming packet, cs_etm__sample() generates branch sample for these two packets and use [packet1::end_addr - 4 => packet2::start_addr] as branch jump flow, thus we can see the first generated branch sample in step 1. At the end of cs_etm__sample() it swaps packets so 'etm->prev_packet'= packet2 and 'etm->packet'=packet1, so far it's okay for branch sample. If packet2 is the last one packet in trace buffer, even there have no any new coming packet, cs_etm__run_decoder() invokes cs_etm__flush() to flush branch stack entries as expected, but it also generates branch samples by taking 'etm->packet' as a new coming packet, thus the branch jump flow is as [packet2::end_addr - 4 => packet1::start_addr]; this is the second sample which is generated in step 2. So actually the second sample is a stale sample and we should not generate it. This patch introduces a new function cs_etm__end_block(), at the end of trace block this function is invoked to only flush branch stack entries and thus can avoid to generate branch sample for stale packet. Signed-off-by:
-
Leo Yan authored
The structure cs_etm_queue uses 'prev_packet' to point to previous packet, this can be used to combine with new coming packet to generate samples. In function cs_etm__flush() it swaps packets only when the flag 'etm->synth_opts.last_branch' is true, this means that it will not swap packets if without option '--itrace=il' to generate last branch entries; thus for this case the 'prev_packet' doesn't point to the correct previous packet and the stale packet still will be used to generate sequential sample. Thus if dump trace with 'perf script' command we can see the incorrect flow with the stale packet's address info. This patch corrects packets swapping in cs_etm__flush(); except using the flag 'etm->synth_opts.last_branch' it also checks the another flag 'etm->sample_branches', if any flag is true then it swaps packets so can save correct content to 'prev_packet'. Finally this can fix the wrong program flow dumping issue. The patch has a minor refactoring to use 'etm->synth_opts.last_branch' instead of 'etmq->etm->synth_opts.last_branch' for condition checking, this is consistent with that is done in cs_etm__sample(). Signed-off-by:
-
Arnaldo Carvalho de Melo authored
We'll start adding more perf-syscall stuff, so lets do this prep step so that the next ones are just about adding more fields. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-vac4sn1ns1vj4y07lzj7y4b8@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
We'll start adding more perf-syscall stuff, so lets do this prep step so that the next ones are just about adding more fields. Run it with the .c file once to cache the .o file: # trace --filter-pids 2834,2199 -e openat,augmented_raw_syscalls.c LLVM: dumping augmented_raw_syscalls.o 0.000 ( 0.021 ms): tmux: server/4952 openat(dfd: CWD, filename: /proc/5691/cmdline ) = 11 349.807 ( 0.040 ms): DNS Res~er #39/11082 openat(dfd: CWD, filename: /etc/hosts, flags: CLOEXEC ) = 44 4988.759 ( 0.052 ms): gsd-color/2431 openat(dfd: CWD, filename: /etc/localtime ) = 18 4988.976 ( 0.029 ms): gsd-color/2431 openat(dfd: CWD, filename: /etc/localtime ) = 18 ^C[root@quaco bpf]# From now on, we can use just the newly built .o file, skipping the compilation step for a faster startup: # trace --filter-pids 2834,2199 -e openat,augmented_raw_syscalls.o 0.000 ( 0.046 ms): DNS Res~er #39/11088 openat(dfd: CWD, filename: /etc/hosts, flags: CLOEXEC ) = 44 1946.408 ( 0.190 ms): systemd/1 openat(dfd: CWD, filename: /proc/1071/cgroup, flags: CLOEXEC ) = 20 1946.792 ( 0.215 ms): systemd/1 openat(dfd: CWD, filename: /proc/954/cgroup, flags: CLOEXEC ) = 20 ^C# Now on to do the same in the builtin-trace.c side of things. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-k8mwu04l8es29rje5loq9vg7@git.kernel.orgSigned-off-by: -
Arnaldo Carvalho de Melo authored
So that we don't always carry that __bpf_output__ map, leaving that to the scripts wanting to use that facility. 'perf trace' will be changed to look if that map is present and only setup the bpf-output events if so. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-azwys8irxqx9053vpajr0k5h@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
Just another map, this time an BPF_MAP_TYPE_ARRAY, stating with one bool per syscall, stating if it should be filtered or not. So, with a pre-built augmented_raw_syscalls.o file, we use: # perf trace -e open*,augmented_raw_syscalls.o 0.000 ( 0.016 ms): DNS Res~er #37/29652 openat(dfd: CWD, filename: /etc/hosts, flags: CLOEXEC ) = 138 187.039 ( 0.048 ms): gsd-housekeepi/2436 openat(dfd: CWD, filename: /etc/fstab, flags: CLOEXEC ) = 11 187.348 ( 0.041 ms): gsd-housekeepi/2436 openat(dfd: CWD, filename: /proc/self/mountinfo, flags: CLOEXEC ) = 11 188.793 ( 0.036 ms): gsd-housekeepi/2436 openat(dfd: CWD, filename: /proc/self/mountinfo, flags: CLOEXEC ) = 11 189.803 ( 0.029 ms): gsd-housekeepi/2436 openat(dfd: CWD, filename: /proc/self/mountinfo, flags: CLOEXEC ) = 11 190.774 ( 0.027 ms): gsd-housekeepi/2436 openat(dfd: CWD, filename: /proc/self/mountinfo, flags: CLOEXEC ) = 11 284.620 ( 0.149 ms): DataStorage/3076 openat(dfd: CWD, filename: /home/acme/.mozilla/firefox/ina67tev.default/SiteSecurityServiceState.txt, flags: CREAT|TRUNC|WRONLY, mode: IRUGO|IWUSR|IWGRP) = 167 ^C# What is it that this gsd-housekeeping thingy needs to open /proc/self/mountinfo four times periodically? :-) This map will be extended to tell per-syscall parameters, i.e. how many bytes to copy per arg, using the function signature to get the types and then the size of those types, via BTF. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-cy222g9ucvnym3raqvxp0hpg@git.kernel.orgSigned-off-by: -
Arnaldo Carvalho de Melo authored
So when we do something like: # perf trace -e open*,augmented_raw_syscalls.o We need to set trace->trace_syscalls because there is logic that use that when mixing strace-like output with other events, such as scheduler tracepoints, but with that set we ended up having multiple raw_syscalls:sys_{enter,exit} setup, which garbled the output, so check if trace->augmented_raw_syscalls is set and avoid the two extra tracepoints. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-kjmnbrlgu0c38co1ye8egbsb@git.kernel.orgSigned-off-by: -
Arnaldo Carvalho de Melo authored
Rename it to trace__set_ev_qualifier_tp_filter(), as this just sets up tracepoint filters on the raw_syscalls:sys_{enter,exit} tracepoints, and since we're going to do the same for the augmented_raw_syscalls codepath, when used, rename it to clarify. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-8bjsul8x7osw7nxjodnyfn14@git.kernel.orgSigned-off-by: -
Jiri Olsa authored
So we could propagate distro flags into libperf-jvmti.so library. Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20181212132940.840-1-jolsa@kernel.orgSigned-off-by:
-
Jiri Olsa authored
So that the user can specify outside LDFLAGS values. Keeping the CFLAGS in there as well, so we don't break existing scripts. Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Cc: Herton Krzesinski <herton@redhat.com> Cc: Tzvetomir Stoyanov (VMware) <tz.stoyanov@gmail.com> Link: http://lkml.kernel.org/r/20181212091214.GC17489@kravaSigned-off-by:
-
Arnaldo Carvalho de Melo authored
To avoid this warning: CC /tmp/build/perf/util/s390-cpumsf.o util/s390-cpumsf.c: In function 's390_cpumsf_samples': util/s390-cpumsf.c:508:3: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 4 has type 'off_t' [-Wformat=] pr_err("[%#08" PRIx64 "] Invalid AUX trailer entry TOD clock base\n", ^ Now the various Android cross toolchains used in the perf tools container test builds are all clean and we can remove this: export EXTRA_MAKE_ARGS="WERROR=0" Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Thomas Richter <tmricht@linux.ibm.com> Link: https://lkml.kernel.org/n/tip-5rav4ccyb0sjciysz2i4p3sx@git.kernel.orgSigned-off-by: -
Arnaldo Carvalho de Melo authored
There are systems such as the Android NDK API level 24 has the open_memstream() function but doesn't provide a prototype, adding noise to the build: builtin-timechart.c: In function 'cat_backtrace': builtin-timechart.c:486:2: warning: implicit declaration of function 'open_memstream' [-Wimplicit-function-declaration] FILE *f = open_memstream(&p, &p_len); ^ builtin-timechart.c:486:2: warning: nested extern declaration of 'open_memstream' [-Wnested-externs] builtin-timechart.c:486:12: warning: initialization makes pointer from integer without a cast FILE *f = open_memstream(&p, &p_len); ^ Define a LACKS_OPEN_MEMSTREAM_PROTOTYPE define so that code needing that can get a prototype. Checked in the bionic git repo to be available since level 23: https://android.googlesource.com/platform/bionic/+/master/libc/include/stdio.h#241 FILE* open_memstream(char** __ptr, size_t* __size_ptr) __INTRODUCED_IN(23); Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-343ashae97e5bq6vizusyfno@git.kernel.orgSigned-off-by: -
Arnaldo Carvalho de Melo authored
Reducing this noise when cross building to the Android NDK: util/header.c: In function 'perf_header__fprintf_info': util/header.c:2710:45: warning: pointer targets in passing argument 1 of 'ctime' differ in signedness [-Wpointer-sign] fprintf(fp, "# captured on : %s", ctime(&st.st_ctime)); ^ In file included from util/../perf.h:5:0, from util/evlist.h:11, from util/header.c:22: /opt/android-ndk-r15c/platforms/android-26/arch-arm/usr/include/time.h:81:14: note: expected 'const time_t *' but argument is of type 'long unsigned int *' extern char* ctime(const time_t*) __LIBC_ABI_PUBLIC__; ^ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-6bz74zp080yhmtiwb36enso9@git.kernel.orgSigned-off-by: -
Arnaldo Carvalho de Melo authored
There are systems such as the Android NDK API level 24 has the sigqueue() function but doesn't provide a prototype, adding noise to the build: util/evlist.c: In function 'perf_evlist__prepare_workload': util/evlist.c:1494:4: warning: implicit declaration of function 'sigqueue' [-Wimplicit-function-declaration] if (sigqueue(getppid(), SIGUSR1, val)) ^ util/evlist.c:1494:4: warning: nested extern declaration of 'sigqueue' [-Wnested-externs] Define a LACKS_SIGQUEUE_PROTOTYPE define so that code needing that can get a prototype. Checked in the bionic git repo to be available since level 23: https://android.googlesource.com/platform/bionic/+/master/libc/include/signal.h#123 int sigqueue(pid_t __pid, int __signal, const union sigval __value) __INTRODUCED_IN(23); Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-lmhpev1uni9kdrv7j29glyov@git.kernel.orgSigned-off-by: -
Arnaldo Carvalho de Melo authored
At some point we decided not to directly include kernel sources files when building tools/perf/, but when tools/lib/subcmd/ was forked from tools/perf it somehow ended up adding it via these two lines in its Makefile: CFLAGS += -I$(srctree)/include/uapi CFLAGS += -I$(srctree)/include As $(srctree) points to the kernel sources. Removing those lines and keeping just: CFLAGS += -I$(srctree)/tools/include/ Is enough to build tools/perf and tools/objtool. This fixes the build when building from the sources in environments such as the Android NDK crossbuilding from a fedora:26 system: subcmd-util.h:11:15: error: expected ',' or ';' before 'void' static inline void report(const char *prefix, const char *err, va_list params) ^ In file included from /git/perf/include/uapi/linux/stddef.h:2:0, from /git/perf/include/uapi/linux/posix_types.h:5, from /opt/android-ndk-r12b/platforms/android-24/arch-arm/usr/include/sys/types.h:36, from /opt/android-ndk-r12b/platforms/android-24/arch-arm/usr/include/unistd.h:33, from run-command.c:2: subcmd-util.h:18:17: error: '__no_instrument_function__' attribute applies only to functions The /opt/android-ndk-r12b/platforms/android-24/arch-arm/usr/include/sys/types.h file that includes linux/posix_types.h ends up getting the one in the kernel sources causing the breakage. Fix it. Test built tools/objtool/ too. Reported-by: -
Arnaldo Carvalho de Melo authored
Noticed while working on renameat2. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-8omchrcjcvlwoxxv6wrjehfh@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
# strace -e renameat2 -f perf trace -e rename* mv c /tmp strace: Process 10824 attached [pid 10824] renameat2(AT_FDCWD, "c", AT_FDCWD, "/tmp", RENAME_NOREPLACE) = -1 EXDEV (Invalid cross-device link) [pid 10824] renameat2(AT_FDCWD, "c", AT_FDCWD, "/tmp/c", RENAME_NOREPLACE) = -1 EEXIST (File exists) 1.857 ( 0.008 ms): mv/10824 renameat2(olddfd: CWD, oldname: 0x7ffc72ff3d81, newdfd: CWD, newname: 0x7ffc72ff3d83, flags: NOREPLACE) = -1 EXDEV Invalid cross-device link 2.002 ( 0.006 ms): mv/10824 renameat2(olddfd: CWD, oldname: 0x7ffc72ff3d81, newdfd: CWD, newname: 0x55ad609efcc0, flags: NOREPLACE) = -1 EEXIST File exists mv: 'c' and '/tmp/c' are the same file [pid 10824] +++ exited with 1 +++ --- SIGCHLD {si_signo=SIGCHLD, si_code=CLD_EXITED, si_pid=10824, si_uid=0, si_status=1, si_utime=0, si_stime=0} --- +++ exited with 0 +++ # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-glyt6nzlt1yx56m5bshy6g83@git.kernel.orgSigned-off-by: -
Arnaldo Carvalho de Melo authored
Now when we run 'make -C tools/perf O=/tmp/build/perf' we end up with: $ cat /tmp/build/perf/trace/beauty/generated/rename_flags_array.c static const char *rename_flags[] = { [0 + 1] = "NOREPLACE", [1 + 1] = "EXCHANGE", [2 + 1] = "WHITEOUT", }; $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-4fad4xahrn04y06o0lc49clm@git.kernel.orgSigned-off-by: -
Arnaldo Carvalho de Melo authored
Using the already copied tools/include/uapi/linux/fs.h file: $ tools/perf/trace/beauty/rename_flags.sh static const char *rename_flags[] = { [0 + 1] = "NOREPLACE", [1 + 1] = "EXCHANGE", [2 + 1] = "WHITEOUT", }; $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-ta2jbh03spkymp4sbdh489g8@git.kernel.orgSigned-off-by: -
Arnaldo Carvalho de Melo authored
Just like is done with the 'renameat' syscall. # strace -e renameat2 -f perf trace -e rename* mv c /tmp [pid 12334] renameat2(AT_FDCWD, "c", AT_FDCWD, "/tmp", RENAME_NOREPLACE) = -1 EXDEV (Invalid cross-device link) [pid 12334] renameat2(AT_FDCWD, "c", AT_FDCWD, "/tmp/c", RENAME_NOREPLACE) = -1 EEXIST (File exists) 1.947 ( 0.007 ms): mv/12334 renameat2(olddfd: CWD, oldname: 0x7ffce8b7fd81, newdfd: CWD, newname: 0x7ffce8b7fd83, flags: 1) = -1 EXDEV Invalid cross-device link 2.073 ( 0.009 ms): mv/12334 renameat2(olddfd: CWD, oldname: 0x7ffce8b7fd81, newdfd: CWD, newname: 0x55ce7f0a1cc0, flags: 1mv: ) = -1 EEXIST File exists'c' and '/tmp/c' are the same file # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-8q9l92eh9eee3y2bwyqku3tc@git.kernel.orgSigned-off-by: -
Arnaldo Carvalho de Melo authored
I was trigger happy on this one, as using ordered_events as implemented by Jiri for use with the --block code under discussion on lkml incurs in delaying processing to form batches that then get ordered and then printed. With 'perf trace' we want to process the events as they go, without that delay, and doing it that way works well for the common case which is to trace a thread or a workload started by 'perf trace'. So revert back to not using ordered_events but add an option to select that mode so that users can experiment with their particular use case to see if works better, i.e. if the added delay is not a problem and the ordering helps. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-8ki7sld6rusnjhhtaly26i5o@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
Just hide a bit more how events gets delivered, hiding ordered_events details from the main loop. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: https://lkml.kernel.org/n/tip-lxwwf3238ta4neq2zh1y1h45@git.kernel.orgSigned-off-by:
-
Steven Rostedt (VMware) authored
In the case that a bprintk event has a dereferenced pointer that is stored as a string, and there's more values to process (more args), the arg was not updated to point to the next arg after processing the dereferenced pointer, and it screwed up what was to be displayed. Signed-off-by:
-
Michael Petlan authored
Some 'perf stat' options do not make sense to be negated (event, cgroup), some do not have negated path implemented (metrics). Due to that, it is better to disable the "no-" prefix for them, since otherwise, the later opt-parsing segfaults. Before: $ perf stat --no-metrics -- ls Segmentation fault (core dumped) After: $ perf stat --no-metrics -- ls Error: option `no-metrics' isn't available Usage: perf stat [<options>] [<command>] Signed-off-by:
Michael Petlan <mpetlan@redhat.com> Tested-by:
-
Michael Petlan authored
Since the first line was used as a test identification, it needs to be skipped by shell_test__description() function now. Further notes from Hendrik: It might be worth to note that adding the shebang is necessary to spot them as scripts. Using /bin/sh looks fine to. Just briefly checked whether the scripts contains some bash-specifics, which is not the case. Signed-off-by:
Hendrik Brueckner <brueckner@linux.ibm.com> Cc: Jiri Olsa <jolsa@redhat.com> LPU-Reference: 2127419430.57657104.1542836358464.JavaMail.zimbra@redhat.com Signed-off-by:
-
Adrian Hunter authored
addr_filter__entire_dso() uses the first and last symbols from a dso, and so does not work when there are no symbols. Alter it to filter the whole file instead. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Fixes: 1b36c03e ("perf record: Add support for using symbols in address filters") Link: http://lkml.kernel.org/r/20181127084634.12469-1-adrian.hunter@intel.com [ split from a larger patch ] Signed-off-by:
-
Adrian Hunter authored
Will be used outside dso.c in a followup patch, so rename it and make it non-static. Signed-off-by:
-
Ingo Molnar authored
Merge tag 'perf-core-for-mingo-4.21-20181217' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo: - Introduce 'perf record --aio' to use asynchronous IO trace writing, disabled by default (Alexey Budankov) - Add fallback routines to be used in places where we don't have the CPU mode (kernel/userspace/hypervisor) and thus must first fallback lookups looking at all map trees when trying to resolve symbols (Adrian Hunter) - Fix error with config term "pt=0", where we should just force "pt=1" and warn the user about the former being nonsensical (Adrian Hunter) - Fix 'perf test' entry where we expect 'sleep' to come in a PERF_RECORD_COMM but instead we get 'coreutils' when sleep is provided by some versions of the 'coreutils' package (Adrian Hunter) - Introduce 'perf top --kallsyms file' to match 'perf report --kallsyms', useful when dealing with BPF, where symbol resolution happens via kallsyms, not via the default vmlinux ELF symtabs (Arnaldo Carvalho de Melo) - Support 'srccode' output field in 'perf script' (Andi Kleen) - Introduce basic 'perf annotation' support for the ARC architecture (Eugeniy Paltsev) - Compute and display average IPC and IPC coverage per symbol in 'perf annotate' and 'perf report' (Jin Yao) - Make 'perf top' use ordered_events and process histograms in a separate thread (Jiri Olsa) - Make 'perf trace' use ordered_events (Jiri Olsa) - Add support for ETMv3 and PTMv1.1 decoding in cs-etm (Mathieu Poirier) - Support for ARM A32/T32 instruction sets in CoreSight trace (cs-etm) (Robert Walker) - Fix 'perf stat' shadow stats for clock events. (Ravi Bangoria) - Remove needless rb_tree extra indirection from map__find() (Eric Saint-Etienne) - Fix CSV mode column output for non-cgroup events in 'perf stat' (Stephane Eranian) - Add sanity check to libtraceevent's is_timestamp_in_us() (Tzvetomir Stoyanov) - Use ERR_CAST instead of ERR_PTR(PTR_ERR()) (Wen Yang) - Fix Load_Miss_Real_Latency on SKL/SKX intel vendor event files (Andi Kleen) - strncpy() fixes triggered by new warnings on gcc 8.2.0 (Arnaldo Carvalho de Melo) - Handle tracefs syscall tracepoint older 'nr' field in 'perf trace', that got renamed to '__syscall_nr' to work in older kernels (Arnaldo Carvalho de Melo) - Give better hint about devel package for libssl (Arnaldo Carvalho de Melo) - Fix the 'perf trace' build in architectures lacking explicit mmap.h file (Arnaldo Carvalho de Melo) - Remove extra rb_tree traversal indirection from map__find() (Eric Saint-Etienne) - Disable breakpoint tests for 32-bit ARM (Florian Fainelli) - Fix typos all over the place, mostly in comments, but also in some debug messages and JSON files (Ingo Molnar) - Allow specifying proc-map-timeout in config file (Mark Drayton) - Fix mmap_flags table generation script (Sihyeon Jang) - Fix 'size' parameter to snprintf in the 'perf config' code (Sihyeon Jang) - More libtraceevent renames to make it a proper library (Tzvetomir Stoyanov) - Implement new API tep_get_ref() in libtraceevent (Tzvetomir Stoyanov) - Added support for pkg-config in libtraceevent (Tzvetomir Stoyanov) Signed-off-by:
Ingo Molnar <mingo@kernel.org>
-
- 17 Dec, 2018 9 commits
-
-
Jiri Olsa authored
Sort events to provide the precise outcome of ordered events, just like is done with 'perf report' and 'perf top'. Signed-off-by:
-
Jiri Olsa authored
To get the timestamp in the first event in the queue. Signed-off-by:
-
Jiri Olsa authored
Mov event delivery code to a new trace__deliver_event() function, so it's easier to add ordered delivery coming in the following patches. Signed-off-by:
-
Jiri Olsa authored
Add OE_FLUSH__TIME flush type, to be able to flush only certain amount of the queue based on the provided timestamp. It will be used in the following patches. Signed-off-by:
-
Eugeniy Paltsev authored
Introduce basic 'perf annotate' support for ARC to be able to use anotation via stdio interface. Signed-off-by:
Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Brodkin <alexey.brodkin@synopsys.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: linux-snps-arc@lists.infradead.org Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Vineet Gupta <vineet.gupta1@synopsys.com> Link: http://lkml.kernel.org/r/20181204175118.25232-1-Eugeniy.Paltsev@synopsys.comSigned-off-by:
-
Sihyeon Jang authored
According to definition of snprintf, it gets size factor including null('\0') byte. So '-1' is not neccessary. Also it will be helpful unfied style with other cases. (eg. builtin-script.c) Signed-off-by:Sihyeon Jang <uneedsihyeon@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/20181201154603.10093-1-uneedsihyeon@gmail.comSigned-off-by:
-
Alexey Budankov authored
Sending a part which was missed between v12 and v13 of the patch set introducing AIO trace streaming for perf record mode. The part is essential to avoid memory leakage during deallocation of AIO related trace data buffers. Signed-off-by:
Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/e5d3154e-1583-83bb-9527-28ddbc6dbf9d@linux.intel.com [ No need to test for NULL before calling zfree() ] Signed-off-by:
-
Andi Kleen authored
Fix incorrect event names for the Load_Miss_Real_Latency metric for Skylake and Skylake Server. Fixes https://github.com/andikleen/pmu-tools/issues/158 Before: % perf stat -M Load_Miss_Real_Latency true event syntax error: '..ss.pending,mem_load_retired.l1_miss_ps,mem_load_retired.fb_hit_ps}:W' \___ parser error Usage: perf stat [<options>] [<command>] -M, --metrics <metric/metric group list> monitor specified metrics or metric groups (separated by ,) After: % perf stat -M Load_Miss_Real_Latency true Performance counter stats for 'true': 279,204 l1d_pend_miss.pending # 14.0 Load_Miss_Real_Latency 4,784 mem_load_uops_retired.l1_miss 15,188 mem_load_uops_retired.hit_lfb 0.000899640 seconds time elapsed Signed-off-by:
Andi Kleen <ak@linux.intel.com> Acked-by:
-
Arnaldo Carvalho de Melo authored
The strncpy() function may leave the destination string buffer unterminated, better use strlcpy() that we have a __weak fallback implementation for systems without it. This fixes this warning on an Alpine Linux Edge system with gcc 8.2: util/parse-events.c: In function 'print_symbol_events': util/parse-events.c:2465:4: error: 'strncpy' specified bound 100 equals destination size [-Werror=stringop-truncation] strncpy(name, syms->symbol, MAX_NAME_LEN); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In function 'print_symbol_events.constprop', inlined from 'print_events' at util/parse-events.c:2508:2: util/parse-events.c:2465:4: error: 'strncpy' specified bound 100 equals destination size [-Werror=stringop-truncation] strncpy(name, syms->symbol, MAX_NAME_LEN); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In function 'print_symbol_events.constprop', inlined from 'print_events' at util/parse-events.c:2511:2: util/parse-events.c:2465:4: error: 'strncpy' specified bound 100 equals destination size [-Werror=stringop-truncation] strncpy(name, syms->symbol, MAX_NAME_LEN); ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: 947b4ad1 ("perf list: Fix max event string size") Link: https://lkml.kernel.org/n/tip-b663e33bm6x8hrkie4uxh7u2@git.kernel.orgSigned-off-by:
-
