- 19 Jul, 2012 40 commits
-
-
H Hartley Sweeten authored
The private data is no longer needed by this driver. Remove the struct, devpriv macro, and the allocation. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Add a couple local variables and reorder the tests to make to make the more concise. Change the printk to a dev_err when no match is found and reword the message. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Factor the "find pci device" code out of the attach function. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
The pci resource bar 0 address is only used as a "flag" to let the datach function know that the pci device has been enabled. Use dev->iobase in the detach instead and remove BADR0 from the private data. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
The pci resource bar 2 address is the primary i/o address used by this device. Store it in dev->iobase and remove it from the private data. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
The pci resource bar 4 address is only needed to initialize the 8255 subdevice. Use a local variable to hold it and remove it from the private data. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
The pci resource bar 1 address is not used in the driver. Remove it from the private data. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Remove the unused variables from the private data. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Remove the dev_dbg output of the pci addresses. It's just add noise. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Add a couple local variables to make the tests more concise. Reorder the tests to make the for() loop checking for a matching boardtype quicker. Use ARRAY_SIZE() to determine the number of boards instead of the hard-coded '1'. Drop the dev_dbg for a match. It's just add noise. Reword the dev_err when no match is found. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Factor the "find pci device" code out of the attach function. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
The private data is no longer needed by this driver. Remove the struct, devpriv macro, and the allocation. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Save the pci bar in dev->iobase instead of carrying it in the private data. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Save the pci bar in dev->iobase so the detach is consistent with the other comedi pci drivers. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Add a couple local variables to make the tests more concise. Reorder the tests to make the for() loop checking for a matching boardtype quicker. Drop the dev_dbg for a match. It's just add noise. Reword the dev_err when no match is found. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Factor the "find pci device" code out of the attach function. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Save the pci bar in dev->iobase so the detach is consistent with the other comedi pci drivers. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Add a couple local variables to make the tests more concise. Reorder the tests to make the for() loop checking for a matching boardtype quicker. Drop the dev_dbg for a match. It's just add noise. Reword the dev_err when no match is found. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Factor the "find pci device" code out of the attach function. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
For aesthetic reasons, rename the function and pass the comedi_devconfig struct instead of pre-parsing out the bus/slot information. Consolidate the dev_err messages when a pci device is not found. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
For aesthetic reasons, rename the function and pass the comedi_devconfig struct instead of pre-parsing out the bus/slot information. Use for_each_pci_dev() instead of open-coding the loop using pci_get_device(). Consolidate the dev_err messages when a pci device is not found. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Since the pci_dev is no longer held in the provate data, we can also cleanup the detach a bit. Remove the IS_ENABLED() tests in the detach. If the pci_dev is non NULL it's a PCI device otherwise it's an ISA device. Using IS_ENABLED() to omit the code paths makes the code a bit confusing and doesn't save much. Since the pci_dev was the only thing in the private data, remove the struct, and it's allocation. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
For aesthetic reasons, rename the function and pass the comedi_devconfig struct instead of pre-parsing out the bus/slot information. Use for_each_pci_dev() instead of open-coding the loop using pci_get_device(). Consolidate the dev_err messages when a pci device is not found. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Since the pci_dev is no longer held in the provate data, we can also cleanup the detach a bit. Remove the IS_ENABLED() tests in the detach. If the pci_dev is non NULL it's a PCI device otherwise it's an ISA device. Using IS_ENABLED() to omit the code paths makes the code a bit confusing and doesn't save much. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
For aesthetic reasons, rename the function and pass the comedi_devconfig struct instead of pre-parsing out the bus/slot information. Use for_each_pci_dev() instead of open-coding the loop using pci_get_device(). Consolidate the dev_err messages when a pci device is not found. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Since the pci_dev is no longer held in the provate data, we can also cleanup the detach a bit. Remove the IS_ENABLED() tests in the detach. If the pci_dev is non NULL it's a PCI device otherwise it's an ISA device. Using IS_ENABLED() to omit the code paths makes the code a bit confusing and doesn't save much. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
For aesthetic reasons, rename the function and pass the comedi_devconfig struct instead of pre-parsing out the bus/slot information. Use for_each_pci_dev() instead of open-coding the loop using pci_get_device(). Consolidate the dev_err messages when a pci device is not found. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Add a couple local variables to make the tests more concise. Reorder the tests to make the for() loop checking for a matching boardtype quicker. Drop the dev_dbg for a match. It's just add noise. Reword the dev_err when no match is found. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Factor the "find pci device" code out of the attach function. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Add a couple local variables to make the tests more concise. Reorder the tests to make the for() loop checking for a matching boardtype quicker. Drop the dev_dbg message for a match. It's just add noise. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
This driver creates a linked list of all the pci devices in the system while it's looking for a match. It's only use is to determine if a device is "free" to use. The pci_is_enabled() helper can give us the same information. Use that instead and remove the linked list. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Factor the "find pci device" code out of the attach function. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
H Hartley Sweeten authored
Use the hw_dev pointer in the comedi_device struct to hold the pci_dev instead of carrying it in the private data. Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-