- 09 Jun, 2017 35 commits
-
-
hayeswang authored
Only RTL8153 could set coalesce, so move the default setting for rtl8152_probe() to r8153_init(). Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
hayeswang authored
Use another way to keep disabling the U2P3 for both RTL_VER_03 and RTL_VER_04. Move enabling U2P3 from r8153_init() to r8153_hw_phy_cfg(). The engineer ask the setting should be done after PHY settings. Disable U2P3 first in rtl8153_up(). Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
hayeswang authored
Adjust the order of rtl8153_runtime_enable() according to the suggestion from the engineer. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
hayeswang authored
Move the setting from r8153_first_init() to r8153_init(). It only needs to be set once. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
hayeswang authored
The MAC clock speed down could be enabled if the U1/U2 is disabled. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
hayeswang authored
Enable lpm after r8153_init() and remove other enable/disable lpm. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
hayeswang authored
Use r8153_phy_status() to check phy status of RTL8153. Signed-off-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Martin KaFai Lau authored
llvm 5.0 does not like the section name and the function name to be the same: clang -I. -I./include/uapi -I../../../include/uapi \ -I../../../../samples/bpf/ \ -Wno-compare-distinct-pointer-types \ -O2 -target bpf -c \ linux/tools/testing/selftests/bpf/test_obj_id.c -o \ linux/tools/testing/selftests/bpf/test_obj_id.o fatal error: error in backend: 'test_prog_id' label emitted multiple times to assembly file clang-5.0: error: clang frontend command failed with exit code 70 (use -v to see invocation) clang version 5.0.0 (trunk 304326) (llvm/trunk 304329) This patch makes changes to the section name and the function name. Fixes: 95b9afd3 ("bpf: Test for bpf ID") Reported-by:
Alexei Starovoitov <ast@fb.com> Reported-by:
Yonghong Song <yhs@fb.com> Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Yonghong Song <yhs@fb.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Martin KaFai Lau authored
test_bpf_obj_id() should not expect a non zero jited_prog_len to be returned by bpf_obj_get_info_by_fd() when net.core.bpf_jit_enable is 0. The patch checks for net.core.bpf_jit_enable and has different expectation on jited_prog_len. This patch also removes the pwd.h header which I forgot to remove after making changes. Fixes: 95b9afd3 ("bpf: Test for bpf ID") Reported-by:
Yonghong Song <yhs@fb.com> Signed-off-by:
Martin KaFai Lau <kafai@fb.com> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Yonghong Song <yhs@fb.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Chenbo Feng authored
Move the initialization of skb->dev and skb->protocol from ip6_finish_output2 to ip6_output. This can make the skb->dev and skb->protocol information avalaible to the CGROUP eBPF filter. Signed-off-by:
Chenbo Feng <fengc@google.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Rahul Lakkireddy authored
Handle TIMER0INT when FW crashes. Check for PCIE_FW[FW_EVAL] and if it says "Device FW Crashed", then treat it as fatal. Else, non-fatal. Signed-off-by:
Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by:
Ganesh Goudar <ganeshgr@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jakub Kicinski says: ==================== nfp: FW app build name reporting This series adds reporting FW build name in ethtool -i. Most of the patches are restructuring where information caching is done. There is also a minor error path fix. These are last few patches finishing the basic nfp_app support. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Make sure application FW build name is NULL-terminated and print it as a part of ethtool's firmware version string. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Microcode Information Page contains some useful information, like application firmware build name. Keep it around, similar to RTSym and HWInfo. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
Make callers take care of managing life time of HWInfo. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
The fact that RTsym table is cached inside nfp_cpp handle is a relic of old times when nfpcore was a library module. All the nfp_cpp "caches" are awkward to deal with because of concurrency and prone to keeping stale information. Make the run time symbol table be an object read out from the device and managed by whoever requested it. Since the driver loads FW at ->probe() and never reloads, we can hold onto the table for ever. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jakub Kicinski authored
If very last stages of netdev registering and init fail some other netdevs and devlink ports may have been visible to user space before we torn them back down. In this case there is a slight chance user may have triggered port refresh. We need to make sure the async work is cancelled. We have to cancel after releasing pf->lock, so we will always try to cancel, regardless of which part of probe has failed. Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Derek Chickles authored
Disallow enabling firmware debug from a VF. Only PF is allowed to do that. Signed-off-by:
Derek Chickles <derek.chickles@cavium.com> Signed-off-by:
Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Girish Moodalbail authored
There are few places on the receive path where packet drops and packet errors were not accounted for. This patch fixes that issue. Signed-off-by:
Girish Moodalbail <girish.moodalbail@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Krister Johansen authored
The ipvlan code already knows how to detect when a duplicate address is about to be assigned to an ipvlan device. However, that failure is not propogated outward and leads to a silent failure. Introduce a validation step at ip address creation time and allow device drivers to register to validate the incoming ip addresses. The ipvlan code is the first consumer. If it detects an address in use, we can return an error to the user before beginning to commit the new ifa in the networking code. This can be especially useful if it is necessary to provision many ipvlans in containers. The provisioning software (or operator) can use this to detect situations where an ip address is unexpectedly in use. Signed-off-by:
Krister Johansen <kjlx@templeofstupid.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Stephen Hemminger says: ==================== netvsc: small cleanups These are all small optimizations found during development of later features. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
No longer need common code to find get_outbound_net_device. Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
Don't need to find netvsc_device structure, caller already had it. Also rearrange declarations. Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
Mark if() statements used for error handling only as unlikely() Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
The element netvsc_device:extension is always a pointer to RNDIS information. Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
Don't need need to look at write space in netvsc_close. Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
stephen hemminger authored
Speed up transmit check for fragmented packets by using existing macros to compute number of pages, and eliminate loop since skb fragments each take a page. Number of slots is also unsigned. Signed-off-by:
Stephen Hemminger <sthemmin@microsoft.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Vivien Didelot says: ==================== net: dsa: mv88e6xxx: ops cosmetics This patchset brings no functional changes. It is a first step in a bigger cosmetics change to the driver. It simplifies print messages and polishes data types and chip operations. The next patchs will only prefix and document the port registers macros. Changes in v2: - KISS and simply use dev_* since chip->ds may not be initialized - add reviewers tags ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
Prefix the PHY_* macros with a Marvell specific MV88E6XXX_ prefix. There is no functional changes. Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
Marvell chips have a Jumbo Mode to set the maximum frame size (MTU). The mv88e6xxx_ops structure is meant to contain generic functionalities, no driver logic. Change port_jumbo_config to port_set_jumbo_size setting the mode from a given maximum size value. There is no functional changes since we still use 10240 bytes. At the same time, correctly clear all Jumbo Mode bits before writing. Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
All Marvell chips supporting Pause frames limiting use 1-byte value for input and output. Old chips have both bytes adjacent in a 16-bit register. New ones have an indirect table using 8-bit data. The mv88e6xxx library functions (such as in port.c) must not contain driver logic, but only generic helpers. This patch changes the port_pause_config operation for port_pause_limit taking two u8 arguments for input and output limits. There is no functional changes. Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
The mv88e6xxx_ops describe functionalities, regardless their locations (which can be Global1, Global2, or whatever register set.) Rename the g1_set_cpu_port and g1_set_egress_port ops to set_cpu_port and set_egress_port. No functional changes. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
Reuse the BR_STATE_* values to abstract a port STP state value. This provides shorter names and better control over the DSA switch operation call. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
As for the frame mode, add a mv88e6xxx_egress_mode enumeration instead of a 16-bit register mask. Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vivien Didelot authored
The mv888e6xxx driver accesses a port's netdev mostly for printing. This is bad for 2 reasons: DSA and CPU ports do not have a netdev pointer; it doesn't give us a correct picture of why a DSA driver might need to access a port's netdev. Instead simply use dev_* printing functions with chip->dev (or ds->dev depending on the scope, both guaranteed to exist), with a p%d prefix for the target port. Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 08 Jun, 2017 5 commits
-
-
Willem de Bruijn authored
When inheriting tx_flags from one skbuff to another, always apply a mask to avoid overwriting unrelated other bits in the field. The two SKBTX_SHARED_FRAG cases clears all other bits. In practice, tx_flags are zero at this point now. But this is fragile. Timestamp flags are set, for instance, if in tcp_gso_segment, after this clear in skb_segment. The SKBTX_ANY_TSTAMP mask in __skb_tstamp_tx ensures that new skbs do not accidentally inherit flags such as SKBTX_SHARED_FRAG. Signed-off-by:
Willem de Bruijn <willemb@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Bhumika Goyal says: ==================== drivers: net: add const to mii_phy_ops structures The object references of mii_phy_ops structures are only stored in the ops field of a mii_phy_def structure. This ops field is of type const. So, mii_phy_ops structures having similar properties can be declared as const. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bhumika Goyal authored
The object references of mii_phy_ops structures are only stored in the ops field of a mii_phy_def structure. This ops field is of type const. So, mii_phy_ops structures having similar properties can be declared as const. Signed-off-by:
Bhumika Goyal <bhumirks@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bhumika Goyal authored
The object references of mii_phy_ops structures are only stored in the ops field of a mii_phy_def structure. This ops field is of type const. So, mii_phy_ops structures having similar properties can be declared as const. Signed-off-by:
Bhumika Goyal <bhumirks@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queueDavid S. Miller authored
Jeff Kirsher says: ==================== 1GbE Intel Wired LAN Driver Updates 2017-06-07 This series contains a fix for e1000e and igb. Colin Ian King fixes sparse warnings in igb by making functions static. Chris Wilson provides a fix for a previous commit which is causing an issue during suspend "e1000e_pm_suspend()", where we need to run e1000e_pm_thaw() if __e1000_shutdown() is unsuccessful. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-