The attached patch fixes fork to get rid of the assumption that THREAD_SIZE
>= PAGE_SIZE (on the FR-V the smallest available page size is 16KB).
Signed-Off-By: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

A few small fixes:

- Check for the model property before using it. Also check for the
  correct property name for nighthawk.
- Check for the existence of freeze-time-base before using it to
  synchronize timebases instead of making it conditional on !LPAR
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

It was possible to hotplug add a new cpu that was larger than numnode.
This meant we had a cpu with a node id that didnt have any NODE_DATA()
backing it.

The following patch catches this in numa_setup_cpu and forces the node to
0.  We also make a pass through all cpus at boot to look for the maximum
node id - this catches the case at boot.  As for hotplug, since the node
doesnt have any memory backing it (otherwise the node would have been
onlined) then we can assume the machine isnt configured for performance and
just force the cpu into node 0.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

When fully configured, some POWER5 boxes can have much more than 4 IDE
interfaces.  Increase the limit to reflect this.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This last patch is a bit if a mess because it mainly consists of combining
some single use small functions into their callers and rearranging some other
code.

Some intermediate variables are introduced and some code is restructured to
improve its readablility (and hopefully maintainability).

Overall there are no semantic changes.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch starts the improvement of the style of the MF code:
	- remove a union that is used where casts suffice
	- add a helper function (signal_ce_msg_simple) and use it
	- replace some painful code that converts a byte array to
	  a couple of u32's and then shifts and masks the bytes back out.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch changes the externally referenced names in mf.c to not use Study
Caps and removes a couple of no longer used functions.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Nothing more than removing trailing white space from mf.c.
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch just moves mf_proc.c into mf.c inanticipation of more cleanup to
come.  So mf_proc.c ceases to exist
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Remove initializations to zero in cpu_specs table at Tom Rini's suggestion.
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Remove __setup_cpu_8xx and its initialization in cpu_specs table since it
hasn't every done anything.  This is at Tom Rini's suggestion.
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The linuxppc mailing lists that were at lists.linuxppc.org have moved to
ozlabs.org.  This patch updates the MAINTAINERS file to reflect that.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

No longer needed.
Signed-off-by: Mark Greer <mgreer@mvista.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Adds the number of performance monitor counters each PowerPC processor has
to the cpu table.  Makes oprofile support a bit cleaner since we dont need
a case statement on processor version to determine the number of counters.
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fixes up the reporting of the e500 core revision.  Additionally, it changes
the reporting of CPU frequency to match what other PPC systems do.
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Here is patch that fixes a compile warning with rheap
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch adds OCP, interrupt, and memory offset details for the security
block on MPC8555/8541 to support drivers.
Signed-off-by: Kumar Gala <kumar.gala@freescale.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch adds a routine that sets up indirect pci config space access but
doesn't ioremap the config space addr/data registers.
Signed-off-by: Mark Greer <mgreer@mvista.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The O_SYNC speedup patches missed the generic_file_xxx_nolock cases, which
means that pages weren't actually getting sync'ed in those cases.  This
patch fixes that. 
Signed-off-by: Suparna Bhattacharya <suparna@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

profile_hook unconditionally takes a read lock on profile_lock if kernel
profiling is enabled.  The lock protects the profile_hook notifier chain
from being written while it's being called.  The routine profile_hook is
called in a very hot path though: every timer tick on every CPU.  As you
can imagine, on a large system, this makes the cacheline containing
profile_lock pretty hot.  Since oprofile was the only user of the
profile_hook, I removed the notifier chain altogether in favor of a simple
function pointer with the help of John Levon.  This removes all of the
contention in the hot path since the variable is very seldom written and
simplifies things a little to boot.
Acked-by: John Levon <levon@movementarian.org>
Signed-off-by: Jesse Barnes <jbarnes@sgi.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

On PA-RISC, we have a unified syscall table for 32 and 64 bit that uses
macros to generate the appropriate syscall names (native vs compat).  For
this to work, we need consistent compat syscall names.  Unfortunately, some
recent additions drop the 'sys_'.
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Silly #endif placement problem.

"platform_rename_gsi" does not exist unless CONFIG_ACPI_BOOT is defined.

into ppc970.osdl.org:/home/torvalds/v2.6/linux

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Patch from Nicolas Pitre

This should be applied on top of patch #2154/1.

This maps the XIP kernel in the same virtual area as used for kernel
modules instead of the previous arbitrary location.  Doing so has the
advantage of having a well defined kernel address not conflicting
with the different definitions for VMALLOC_END, as well as making
modules loadable without any indirect long branch calls.  The work
on XIPable MTD also requires this with code marked __xipram for the
same reason.

This of course reduces the space available for kernel modules from
16MB to either 14MB or 12MB depending on the size of the resulting 
kernel but that shouldn't be a real issue at all, given that the
whole purpose behind XIP is to execute as much stuff from flash, 
which is better achieved by compiling drivers in the kernel directly.

Signed-off-by: Nicolas Pitre 
Signed-off-by: Russell King

Patch from Nicolas Pitre

This patch allows for the kernel to be configured for XIP.
A lot of people are using semi hacked up XIP patches already so
it is a good idea to have a generic and clean implementation 
supporting all ARM targets. The patch isn't too intrusive.

It involves:

- modifying the kernel entry code to map separate .text and .data
  sections in the initial page table, as well as relocating
  .data to ram when needed

- modifying the linker script to account for the different VMA and
  LMA for .data, as well as making sure that .init.data gets
  relocated to ram

- adding the final kernel mapping with a new MT_ROM mem type

- distinguishing between XIP and non-XIP for bootmem and memory
  resource declaration

- and adding proper target handling to Makefiles.

While at it, this also cleans up the kernel boot code a bit
so the kernel can now be compiled for any address in ram,
removing the need for a relation between kernel address and
start of ram.  Also throws in some more comments.

And finally the _text, _etext, _end and similar variables are now
declared extern void instead of extern char, or even extern int.
That allows for operations on their address directly without any
cast, and trying to reference them by mistake would yield an 
error which is a good thing.

Tested both configurations: XIP and non XIP, the later 
producing a kernel for execution from ram just as before.

Signed-off-by: Nicolas Pitre 
Signed-off-by: Russell King

Patch from Ben Dooks

Added symbol export to the file, and cleaned up the
un-necessary include files

Signed-off-by: Ben Dooks 
Signed-off-by: Russell King

into nuts.davemloft.net:/disk1/BK/net-2.6

Make sure kernel reads full size of elf data.  Error out if mmap fails
when mapping any sections of the executable.  Make sure interpreter
string is NULL terminated. 
Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

On Tue, Nov 09, 2004 at 01:38:11PM -0600, Jason.Jorgensen@comtrol.com wrote:
     On Tuesday, November 09, 2004 10:58 AM, Theodore Ts'o <tytso@mit.edu> wrote:
    > I developed the Rocketport device driver under contract of Comtrol,
    > with the understanding that the resulting device driver would be
    > released under the GPL.  So I believe the correct way of resolving the
    > conflicting copyright statements is to delete the following lines.
    > 
    > It would be good to get positive confirmation from Comtrol as well
    > that this is their understanding as well. 
   
     You are absolutely correct. That notice slipped by us and should not be in
     there. 
   
     If someone with access to the mainline source could remove that for us we
     would appreciate it.

Cc: Keith.Hammerbeck@comtrol.com, Steve.Erler@comtrol.com
Acked-by: Jason.Jorgensen@comtrol.com
Signed-off-by: "Theodore Ts'o" <tytso@thunk.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Only set the flag in the cases when the exit state is not either
TASK_DEAD or TASK_ZOMBIE.

(TASK_DEAD or TASK_ZOMBIE will either race or we'll return the 
information, so no need to note them).

I confirmed that this fixes the problem and I also ran some LTP tests
Signed-off-by: Dinakar Guniguntala <dino@in.ibm.com>
Signed-off-by: Sripathi Kodi <sripathik@in.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

into cantab.net:/home/src/ntfs-2.6-devel

into cantab.net:/home/src/ntfs-2.6-devel

- Cleanup fs/ntfs/aops.c::ntfs_{read,write}page() since we know that a
  resident attribute will be smaller than a page which makes the code
  simpler.  Also make the code more tolerant to concurrent ->truncate.
Signed-off-by: Anton Altaparmakov <aia21@cantab.net>

into flatcap.org:/home/flatcap/backup/bk/ntfs-2.6-devel

Patch from Dave Jiang

Converting IOP321 UART to platform device
Remove asm/arch/serial.h dependency

Signed-off-by: Dave Jiang
Signed-off-by: Russell King

Patch from Dave Jiang

Clean up iop3xx timer routines and move to xtime_lock/timer_tick schemes
dependent on patch 2216/1

Signed-off-by: Dave Jiang
Signed-off-by: Russell King

Patch from Ben Dooks

Add a system device for the s3c2440 called s3c2440-core
to allow power management hooks for s3c2440 specific
registers to be added.

Signed-off-by: Ben Dooks 
Signed-off-by: Russell King