- 06 Mar, 2015 22 commits
-
-
Dmitry Eremin-Solenikov authored
commit e461894d upstream. StrongARM core uses RCSR SMR bit to tell to bootloader that it was reset by entering the sleep mode. After we have resumed, there is little point in having that bit enabled. Moreover, if this bit is set before reboot, the bootloader can become confused. Thus clear the SMR bit on resume just before clearing the scratchpad (resume address) register. Signed-off-by:
Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Vikram Mulukutla authored
commit 7215853e upstream. Commit 6edb2a8a introduced an array map_pages that contains the addresses returned by kmap_atomic. However, when unmapping those pages, map_pages[0] is unmapped before map_pages[1], breaking the nesting requirement as specified in the documentation for kmap_atomic/kunmap_atomic. This was caught by the highmem debug code present in kunmap_atomic. Fix the loop to do the unmapping properly. Link: http://lkml.kernel.org/r/1418871056-6614-1-git-send-email-markivx@codeaurora.orgReviewed-by:
Stephen Boyd <sboyd@codeaurora.org> Reported-by:
Lime Yang <limey@codeaurora.org> Signed-off-by:
Vikram Mulukutla <markivx@codeaurora.org> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
James Hogan authored
commit 044f0f03 upstream. When about to run the guest, deliver guest interrupts after disabling host interrupts. This should prevent an hrtimer interrupt from being handled after delivering guest interrupts, and therefore not delivering the guest timer interrupt until after the next guest exit. Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: kvm@vger.kernel.org Cc: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Cc: Sanjay Lal <sanjayl@kymasys.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Jeff Layton authored
commit 6ffa30d3 upstream. Bruce reported seeing this warning pop when mounting using v4.1: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 1121 at kernel/sched/core.c:7300 __might_sleep+0xbd/0xd0() do not call blocking ops when !TASK_RUNNING; state=1 set at [<ffffffff810ff58f>] prepare_to_wait+0x2f/0x90 Modules linked in: rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace sunrpc fscache ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ebtable_nat ebtable_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_defrag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack iptable_mangle iptable_security iptable_raw snd_hda_codec_generic snd_hda_intel snd_hda_controller snd_hda_codec snd_hwdep snd_pcm snd_timer ppdev joydev snd virtio_console virtio_balloon pcspkr serio_raw parport_pc parport pvpanic floppy soundcore i2c_piix4 virtio_blk virtio_net qxl drm_kms_helper ttm drm virtio_pci virtio_ring ata_generic virtio pata_acpi CPU: 1 PID: 1121 Comm: nfsv4.1-svc Not tainted 3.19.0-rc4+ #25 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.7.5-20140709_153950- 04/01/2014 0000000000000000 000000004e5e3f73 ffff8800b998fb48 ffffffff8186ac78 0000000000000000 ffff8800b998fba0 ffff8800b998fb88 ffffffff810ac9da ffff8800b998fb68 ffffffff81c923e7 00000000000004d9 0000000000000000 Call Trace: [<ffffffff8186ac78>] dump_stack+0x4c/0x65 [<ffffffff810ac9da>] warn_slowpath_common+0x8a/0xc0 [<ffffffff810aca65>] warn_slowpath_fmt+0x55/0x70 [<ffffffff810ff58f>] ? prepare_to_wait+0x2f/0x90 [<ffffffff810ff58f>] ? prepare_to_wait+0x2f/0x90 [<ffffffff810dd2ad>] __might_sleep+0xbd/0xd0 [<ffffffff8124c973>] kmem_cache_alloc_trace+0x243/0x430 [<ffffffff810d941e>] ? groups_alloc+0x3e/0x130 [<ffffffff810d941e>] groups_alloc+0x3e/0x130 [<ffffffffa0301b1e>] svcauth_unix_accept+0x16e/0x290 [sunrpc] [<ffffffffa0300571>] svc_authenticate+0xe1/0xf0 [sunrpc] [<ffffffffa02fc564>] svc_process_common+0x244/0x6a0 [sunrpc] [<ffffffffa02fd044>] bc_svc_process+0x1c4/0x260 [sunrpc] [<ffffffffa03d5478>] nfs41_callback_svc+0x128/0x1f0 [nfsv4] [<ffffffff810ff970>] ? wait_woken+0xc0/0xc0 [<ffffffffa03d5350>] ? nfs4_callback_svc+0x60/0x60 [nfsv4] [<ffffffff810d45bf>] kthread+0x11f/0x140 [<ffffffff810ea815>] ? local_clock+0x15/0x30 [<ffffffff810d44a0>] ? kthread_create_on_node+0x250/0x250 [<ffffffff81874bfc>] ret_from_fork+0x7c/0xb0 [<ffffffff810d44a0>] ? kthread_create_on_node+0x250/0x250 ---[ end trace 675220a11e30f4f2 ]--- nfs41_callback_svc does most of its work while in TASK_INTERRUPTIBLE, which is just wrong. Fix that by finishing the wait immediately if we've found that the list has something on it. Also, we don't expect this kthread to accept signals, so we should be using a TASK_UNINTERRUPTIBLE sleep instead. That however, opens us up hung task warnings from the watchdog, so have the schedule_timeout wake up every 60s if there's no callback activity. Reported-by:
"J. Bruce Fields" <bfields@fieldses.org> Signed-off-by:
Jeff Layton <jlayton@primarydata.com> Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Jisheng Zhang authored
commit 14460dba upstream. Current code checks "clk_delay_cycles > 0" to know whether the optional "mrvl,clk_delay_cycles" is set or not. But of_property_read_u32() doesn't touch clk_delay_cycles if the property is not set. And type of clk_delay_cycles is u32, so we may always set pdata->clk_delay_cycles as a random value. This patch fix this problem by check the return value of of_property_read_u32() to know whether the optional clk-delay-cycles is set or not. Signed-off-by:
Jisheng Zhang <jszhang@marvell.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Krzysztof Kozlowski authored
commit 24727b45 upstream. Driver forgot to unregister power supply if request_threaded_irq() failed in probe(). In such case the memory associated with power supply leaked. Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Fixes: a830d28b ("power_supply: Enable battery-charger for 88pm860x") Signed-off-by:
Sebastian Reichel <sre@kernel.org> Signed-off-by:
-
Adrian Knoth authored
commit f0153c3d upstream. RME RayDAT and AIO use a fixed buffer size of 16384 samples. With period sizes of 32-4096, this translates to 4-512 periods. The older RME cards have a variable buffer size but require exactly two periods. This patch enforces nperiods=2 on those cards. Signed-off-by:
Adrian Knoth <adi@drcomp.erfurt.thur.de> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Dan Carpenter authored
commit e4940626 upstream. The problem here is that we check: if (dev >= SNDRV_CARDS) Then we increment "dev". if (!joystick_port[dev++]) Then we use it as an offset into a array with SNDRV_CARDS elements. if (!request_region(joystick_port[dev], 8, "Riptide gameport")) { This has 3 effects: 1) If you use the module option to specify the joystick port then it has to be shifted one space over. 2) The wrong error message will be printed on failure if you have over 32 cards. 3) Static checkers will correctly complain that are off by one. Fixes: db1005ec ('ALSA: riptide - Fix joystick resource handling') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Malcolm Priestley authored
commit 15e1ce33 upstream. A quirk of some older firmwares that report endpoint pipe type as PIPE_BULK but the endpoint otheriwse functions as interrupt. Check if usb_endpoint_type is USB_ENDPOINT_XFER_BULK and set as usb_rcvbulkpipe. Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Mikulas Patocka authored
commit d4d4eda2 upstream. On Dell Latitude C600 laptop with Pentium 3 850MHz processor, the speedstep-smi driver sometimes loads and sometimes doesn't load with "change to state X failed" message. The hardware sometimes refuses to change frequency and in this case, we need to retry later. I found out that we need to enable interrupts while waiting. When we enable interrupts, the hardware blockage that prevents frequency transition resolves and the transition is possible. With disabled interrupts, the blockage doesn't resolve (no matter how long do we wait). The exact reasons for this hardware behavior are unknown. This patch enables interrupts in the function speedstep_set_state that can be called with disabled interrupts. However, this function is called with disabled interrupts only from speedstep_get_freqs, so it shouldn't cause any problem. Signed-off-by: Mikulas Patocka <mpatocka@redhat.com Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Michel Dänzer authored
commit 16b036af upstream. If the image size would ever read as 0, pci_get_rom_size() could keep processing the same image over and over again. Exit the loop if we ever read a length of zero. This fixes a soft lockup on boot when the radeon driver calls pci_get_rom_size() on an AMD Radeon R7 250X PCIe discrete graphics card. [bhelgaas: changelog, reference] Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1386973Reported-by:
Federico <federicotg@gmail.com> Signed-off-by:
Michel Dänzer <michel.daenzer@amd.com> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Ricardo Ribalda Delgado authored
commit 145b3fe5 upstream. Some implementations of modprobe fail to load the driver for a PCI device automatically because the "interface" part of the modalias from the kernel is lowercase, and the modalias from file2alias is uppercase. The "interface" is the low-order byte of the Class Code, defined in PCI r3.0, Appendix D. Most interface types defined in the spec do not use alpha characters, so they won't be affected. For example, 00h, 01h, 10h, 20h, etc. are unaffected. Print the "interface" byte of the Class Code in uppercase hex, as we already do for the Vendor ID, Device ID, Class, etc. Commit 89ec3dcf ("PCI: Generate uppercase hex for modalias interface class") fixed only half of the problem. Some udev implementations rely on the uevent file and not the modalias file. Fixes: d1ded203 ("PCI: add MODALIAS to hotplug event for pci devices") Fixes: 89ec3dcf ("PCI: Generate uppercase hex for modalias interface class") Signed-off-by:
Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com> Signed-off-by:
-
Seth Forshee authored
commit 6d00f37e upstream. d1c7e29e (HID: i2c-hid: prevent buffer overflow in early IRQ) changed hid_get_input() to read ihid->bufsize bytes, which can be more than wMaxInputLength. This is the case with the Dell XPS 13 9343, and it is causing events to be missed. In some cases the missed events are releases, which can cause the cursor to jump or freeze, among other problems. Limit the number of bytes read to min(wMaxInputLength, ihid->bufsize) to prevent such problems. Fixes: d1c7e29e "HID: i2c-hid: prevent buffer overflow in early IRQ" Signed-off-by:
Seth Forshee <seth.forshee@canonical.com> Reviewed-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Luciano Coelho authored
commit 5523d11c upstream. We don't really need to use different mac colors when adding mac contexts, because they're not used anywhere. In fact, the firmware doesn't accept 255 as a valid color, so we get into a SYSASSERT 0x3401 when we reach that. Remove the color increment to use always zero and avoid reaching 255. Signed-off-by:
Luciano Coelho <luciano.coelho@intel.com> Reviewed-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Luciano Coelho authored
commit fd66fc1c upstream. When iwl_mvm_power_update_mac() is called, we have already added the mac context, so if this call fails we should remove the mac. Fixes: commit e5e7aa8e ('iwlwifi: mvm: refactor power code') Signed-off-by:
-
Eyal Shapira authored
commit 2cee4762 upstream. These are coming from the FW and are used to access arrays. Bad values can cause an out of bounds access so discard such ba_notifs and warn. Signed-off-by:
Eyal Shapira <eyalx.shapira@intel.com> Signed-off-by:
-
Emmanuel Grumbach authored
commit cd8f4384 upstream. The base address of the scheduler in the device's memory (SRAM) comes from two different sources. The periphery register and the alive notification from the firmware. We have a check in iwl_pcie_tx_start that ensures that they are the same. When we resume from WoWLAN, the firmware may have crashed for whatever reason. In that case, the whole device may be reset which means that the periphery register will hold a meaningless value. When we come to compare trans_pcie->scd_base_addr (which really holds the value we had when we loaded the WoWLAN firmware upon suspend) and the current value of the register, we don't see a match unsurprisingly. Trick the check to avoid a loud yet harmless WARN. Note that when the WoWLAN has crashed, we will see that in iwl_trans_pcie_d3_resume which will let the op_mode know. Once the op_mode is informed that the WowLAN firmware has crashed, it can't do much besides resetting the whole device. Reviewed-by:
-
Jan Kara authored
commit 6ee8e25f upstream. Commit e9fd702a ("audit: convert audit watches to use fsnotify instead of inotify") broke handling of renames in audit. Audit code wants to update inode number of an inode corresponding to watched name in a directory. When something gets renamed into a directory to a watched name, inotify previously passed moved inode to audit code however new fsnotify code passes directory inode where the change happened. That confuses audit and it starts watching parent directory instead of a file in a directory. This can be observed for example by doing: cd /tmp touch foo bar auditctl -w /tmp/foo touch foo mv bar foo touch foo In audit log we see events like: type=CONFIG_CHANGE msg=audit(1423563584.155:90): auid=1000 ses=2 op="updated rules" path="/tmp/foo" key=(null) list=4 res=1 ... type=PATH msg=audit(1423563584.155:91): item=2 name="bar" inode=1046884 dev=08:0 2 mode=0100644 ouid=0 ogid=0 rdev=00:00 nametype=DELETE type=PATH msg=audit(1423563584.155:91): item=3 name="foo" inode=1046842 dev=08:0 2 mode=0100644 ouid=0 ogid=0 rdev=00:00 nametype=DELETE type=PATH msg=audit(1423563584.155:91): item=4 name="foo" inode=1046884 dev=08:0 2 mode=0100644 ouid=0 ogid=0 rdev=00:00 nametype=CREATE ... and that's it - we see event for the first touch after creating the audit rule, we see events for rename but we don't see any event for the last touch. However we start seeing events for unrelated stuff happening in /tmp. Fix the problem by passing moved inode as data in the FS_MOVED_FROM and FS_MOVED_TO events instead of the directory where the change happens. This doesn't introduce any new problems because noone besides audit_watch.c cares about the passed value: fs/notify/fanotify/fanotify.c cares only about FSNOTIFY_EVENT_PATH events. fs/notify/dnotify/dnotify.c doesn't care about passed 'data' value at all. fs/notify/inotify/inotify_fsnotify.c uses 'data' only for FSNOTIFY_EVENT_PATH. kernel/audit_tree.c doesn't care about passed 'data' at all. kernel/audit_watch.c expects moved inode as 'data'. Fixes: e9fd702a ("audit: convert audit watches to use fsnotify instead of inotify") Signed-off-by:
Jan Kara <jack@suse.cz> Cc: Paul Moore <paul@paul-moore.com> Cc: Eric Paris <eparis@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Dave Chinner authored
commit 3443a3bc upstream. When the superblock is modified in a transaction, the commonly modified fields are not actually copied to the superblock buffer to avoid the buffer lock becoming a serialisation point. However, there are some other operations that modify the superblock fields within the transaction that don't directly log to the superblock but rely on the changes to be applied during the transaction commit (to minimise the buffer lock hold time). When we do this, we fail to mark the buffer log item as being a superblock buffer and that can lead to the buffer not being marked with the corect type in the log and hence causing recovery issues. Fix it by setting the type correctly, similar to xfs_mod_sb()... Tested-by:
Dave Chinner <dchinner@redhat.com> Reviewed-by:
Brian Foster <bfoster@redhat.com> Signed-off-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
-
Dave Chinner authored
commit f19b872b upstream. This leads to log recovery throwing errors like: XFS (md0): Mounting V5 Filesystem XFS (md0): Starting recovery (logdev: internal) XFS (md0): Unknown buffer type 0! XFS (md0): _xfs_buf_ioapply: no ops on block 0xaea8802/0x1 ffff8800ffc53800: 58 41 47 49 ..... Which is the AGI buffer magic number. Ensure that we set the type appropriately in both unlink list addition and removal. Tested-by:
-
Dave Chinner authored
commit 0d612fb5 upstream. Jan Kara reported that log recovery was finding buffers with invalid types in them. This should not happen, and indicates a bug in the logging of buffers. To catch this, add asserts to the buffer formatting code to ensure that the buffer type is in range when the transaction is committed. We don't set a type on buffers being marked stale - they are not going to get replayed, the format item exists only for recovery to be able to prevent replay of the buffer, so the type does not matter. Hence that needs special casing here. Reported-by:
-
Adam Lee authored
commit c561a575 upstream. BugLink: https://bugs.launchpad.net/bugs/1400215 ath3k devices fail to load firmwares on xHCI buses, but work well on EHCI, this might be a compatibility issue between xHCI and ath3k chips. As my testing result, those chips will work on xHCI buses again with this patch. This workaround is from Qualcomm, they also did some workarounds in Windows driver. Signed-off-by:
Adam Lee <adam.lee@canonical.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
- 27 Feb, 2015 17 commits
-
-
Greg Kroah-Hartman authored
-
Alex Elder authored
commit 638c323c upstream. Olivier Bonvalet reported having repeated crashes due to a failed assertion he was hitting in rbd_img_obj_callback(): Assertion failure in rbd_img_obj_callback() at line 2165: rbd_assert(which >= img_request->next_completion); With a lot of help from Olivier with reproducing the problem we were able to determine the object and image requests had already been completed (and often freed) at the point the assertion failed. There was a great deal of discussion on the ceph-devel mailing list about this. The problem only arose when there were two (or more) object requests in an image request, and the problem was always seen when the second request was being completed. The problem is due to a race in the window between setting the "done" flag on an object request and checking the image request's next completion value. When the first object request completes, it checks to see if its successor request is marked "done", and if so, that request is also completed. In the process, the image request's next_completion value is updated to reflect that both the first and second requests are completed. By the time the second request is able to check the next_completion value, it has been set to a value *greater* than its own "which" value, which caused an assertion to fail. Fix this problem by skipping over any completion processing unless the completing object request is the next one expected. Test only for inequality (not >=), and eliminate the bad assertion. Tested-by:
Olivier Bonvalet <ob@daevel.fr> Signed-off-by:
Alex Elder <elder@linaro.org> Reviewed-by:
Sage Weil <sage@inktank.com> Reviewed-by:
Ilya Dryomov <ilya.dryomov@inktank.com> Signed-off-by:
-
Austin Lund authored
commit a8f29e89 upstream. Userspace expects to see a long space before the first pulse is sent on the lirc device. Currently, if a long time has passed and a new packet is started, the lirc codec just returns and doesn't send anything. This makes lircd ignore many perfectly valid signals unless they are sent in quick sucession. When a reset event is delivered, we cannot know anything about the duration of the space. But it should be safe to assume it has been a long time and we just set the duration to maximum. Signed-off-by:
Austin Lund <austin.lund@gmail.com> Signed-off-by:
-
Saran Maruti Ramanara authored
[ Upstream commit cfbf654e ] When making use of RFC5061, section 4.2.4. for setting the primary IP address, we're passing a wrong parameter header to param_type2af(), resulting always in NULL being returned. At this point, param.p points to a sctp_addip_param struct, containing a sctp_paramhdr (type = 0xc004, length = var), and crr_id as a correlation id. Followed by that, as also presented in RFC5061 section 4.2.4., comes the actual sctp_addr_param, which also contains a sctp_paramhdr, but this time with the correct type SCTP_PARAM_IPV{4,6}_ADDRESS that param_type2af() can make use of. Since we already hold a pointer to addr_param from previous line, just reuse it for param_type2af(). Fixes: d6de3097 ("[SCTP]: Add the handling of "Set Primary IP Address" parameter to INIT") Signed-off-by:
Saran Maruti Ramanara <saran.neti@telus.com> Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Acked-by:
Vlad Yasevich <vyasevich@gmail.com> Acked-by:
Neil Horman <nhorman@tuxdriver.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Florian Westphal authored
[ Upstream commit e2a4800e ] When we've run out of space in the output buffer to store more data, we will call zlib_deflate with a NULL output buffer until we've consumed remaining input. When this happens, olen contains the size the output buffer would have consumed iff we'd have had enough room. This can later cause skb_over_panic when ppp_generic skb_put()s the returned length. Reported-by:
Iain Douglas <centos@1n6.org.uk> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit bdbbb852 ] In commit be9f4a44 ("ipv4: tcp: remove per net tcp_sock") I tried to address contention on a socket lock, but the solution I chose was horrible : commit 3a7c384f ("ipv4: tcp: unicast_sock should not land outside of TCP stack") addressed a selinux regression. commit 0980e56e ("ipv4: tcp: set unicast_sock uc_ttl to -1") took care of another regression. commit b5ec8eea ("ipv4: fix ip_send_skb()") fixed another regression. commit 811230cd ("tcp: ipv4: initialize unicast_sock sk_pacing_rate") was another shot in the dark. Really, just use a proper socket per cpu, and remove the skb_orphan() call, to re-enable flow control. This solves a serious problem with FQ packet scheduler when used in hostile environments, as we do not want to allocate a flow structure for every RST packet sent in response to a spoofed packet. Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 811230cd ] When I added sk_pacing_rate field, I forgot to initialize its value in the per cpu unicast_sock used in ip_send_unicast_reply() This means that for sch_fq users, RST packets, or ACK packets sent on behalf of TIME_WAIT sockets might be sent to slowly or even dropped once we reach the per flow limit. Signed-off-by:
-
Roopa Prabhu authored
[ Upstream commit 59ccaaaa ] Reported in: https://bugzilla.kernel.org/show_bug.cgi?id=92081 This patch avoids calling rtnl_notify if the device ndo_bridge_getlink handler does not return any bytes in the skb. Alternately, the skb->len check can be moved inside rtnl_notify. For the bridge vlan case described in 92081, there is also a fix needed in bridge driver to generate a proper notification. Will fix that in subsequent patch. v2: rebase patch on net tree Signed-off-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit 6e9e16e6 ] Lubomir Rintel reported that during replacing a route the interface reference counter isn't correctly decremented. To quote bug <https://bugzilla.kernel.org/show_bug.cgi?id=91941>: | [root@rhel7-5 lkundrak]# sh -x lal | + ip link add dev0 type dummy | + ip link set dev0 up | + ip link add dev1 type dummy | + ip link set dev1 up | + ip addr add 2001:db8:8086::2/64 dev dev0 | + ip route add 2001:db8:8086::/48 dev dev0 proto static metric 20 | + ip route add 2001:db8:8088::/48 dev dev1 proto static metric 10 | + ip route replace 2001:db8:8086::/48 dev dev1 proto static metric 20 | + ip link del dev0 type dummy | Message from syslogd@rhel7-5 at Jan 23 10:54:41 ... | kernel:unregister_netdevice: waiting for dev0 to become free. Usage count = 2 | | Message from syslogd@rhel7-5 at Jan 23 10:54:51 ... | kernel:unregister_netdevice: waiting for dev0 to become free. Usage count = 2 During replacement of a rt6_info we must walk all parent nodes and check if the to be replaced rt6_info got propagated. If so, replace it with an alive one. Fixes: 4a287eba ("IPv6 routing, NLM_F_* flag support: REPLACE and EXCL flags support, warn about missing CREATE flag") Reported-by:
Lubomir Rintel <lkundrak@v3.sk> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Tested-by:
-
subashab@codeaurora.org authored
[ Upstream commit fc752f1f ] An exception is seen in ICMP ping receive path where the skb destructor sock_rfree() tries to access a freed socket. This happens because ping_rcv() releases socket reference with sock_put() and this internally frees up the socket. Later icmp_rcv() will try to free the skb and as part of this, skb destructor is called and which leads to a kernel panic as the socket is freed already in ping_rcv(). -->|exception -007|sk_mem_uncharge -007|sock_rfree -008|skb_release_head_state -009|skb_release_all -009|__kfree_skb -010|kfree_skb -011|icmp_rcv -012|ip_local_deliver_finish Fix this incorrect free by cloning this skb and processing this cloned skb instead. This patch was suggested by Eric Dumazet Signed-off-by:
Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Cc: Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Herbert Xu authored
[ Upstream commit 86f3cddb ] While working on rhashtable walking I noticed that the UDP diag dumping code is buggy. In particular, the socket skipping within a chain never happens, even though we record the number of sockets that should be skipped. As this code was supposedly copied from TCP, this patch does what TCP does and resets num before we walk a chain. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Acked-by:
Pavel Emelyanov <xemul@parallels.com> Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit df4d9254 ] Not caching dst_entries which cause redirects could be exploited by hosts on the same subnet, causing a severe DoS attack. This effect aggravated since commit f8864972 ("ipv4: fix dst race in sk_dst_get()"). Lookups causing redirects will be allocated with DST_NOCACHE set which will force dst_release to free them via RCU. Unfortunately waiting for RCU grace period just takes too long, we can end up with >1M dst_entries waiting to be released and the system will run OOM. rcuos threads cannot catch up under high softirq load. Attaching the flag to emit a redirect later on to the specific skb allows us to cache those dst_entries thus reducing the pressure on allocation and deallocation. This issue was discovered by Marcelo Leitner. Cc: Julian Anastasov <ja@ssi.bg> Signed-off-by:
Marcelo Leitner <mleitner@redhat.com> Signed-off-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 600ddd68 ] When hitting an INIT collision case during the 4WHS with AUTH enabled, as already described in detail in commit 1be9a950 ("net: sctp: inherit auth_capable on INIT collisions"), it can happen that we occasionally still remotely trigger the following panic on server side which seems to have been uncovered after the fix from commit 1be9a950 ... [ 533.876389] BUG: unable to handle kernel paging request at 00000000ffffffff [ 533.913657] IP: [<ffffffff811ac385>] __kmalloc+0x95/0x230 [ 533.940559] PGD 5030f2067 PUD 0 [ 533.957104] Oops: 0000 [#1] SMP [ 533.974283] Modules linked in: sctp mlx4_en [...] [ 534.939704] Call Trace: [ 534.951833] [<ffffffff81294e30>] ? crypto_init_shash_ops+0x60/0xf0 [ 534.984213] [<ffffffff81294e30>] crypto_init_shash_ops+0x60/0xf0 [ 535.015025] [<ffffffff8128c8ed>] __crypto_alloc_tfm+0x6d/0x170 [ 535.045661] [<ffffffff8128d12c>] crypto_alloc_base+0x4c/0xb0 [ 535.074593] [<ffffffff8160bd42>] ? _raw_spin_lock_bh+0x12/0x50 [ 535.105239] [<ffffffffa0418c11>] sctp_inet_listen+0x161/0x1e0 [sctp] [ 535.138606] [<ffffffff814e43bd>] SyS_listen+0x9d/0xb0 [ 535.166848] [<ffffffff816149a9>] system_call_fastpath+0x16/0x1b ... or depending on the the application, for example this one: [ 1370.026490] BUG: unable to handle kernel paging request at 00000000ffffffff [ 1370.026506] IP: [<ffffffff811ab455>] kmem_cache_alloc+0x75/0x1d0 [ 1370.054568] PGD 633c94067 PUD 0 [ 1370.070446] Oops: 0000 [#1] SMP [ 1370.085010] Modules linked in: sctp kvm_amd kvm [...] [ 1370.963431] Call Trace: [ 1370.974632] [<ffffffff8120f7cf>] ? SyS_epoll_ctl+0x53f/0x960 [ 1371.000863] [<ffffffff8120f7cf>] SyS_epoll_ctl+0x53f/0x960 [ 1371.027154] [<ffffffff812100d3>] ? anon_inode_getfile+0xd3/0x170 [ 1371.054679] [<ffffffff811e3d67>] ? __alloc_fd+0xa7/0x130 [ 1371.080183] [<ffffffff816149a9>] system_call_fastpath+0x16/0x1b With slab debugging enabled, we can see that the poison has been overwritten: [ 669.826368] BUG kmalloc-128 (Tainted: G W ): Poison overwritten [ 669.826385] INFO: 0xffff880228b32e50-0xffff880228b32e50. First byte 0x6a instead of 0x6b [ 669.826414] INFO: Allocated in sctp_auth_create_key+0x23/0x50 [sctp] age=3 cpu=0 pid=18494 [ 669.826424] __slab_alloc+0x4bf/0x566 [ 669.826433] __kmalloc+0x280/0x310 [ 669.826453] sctp_auth_create_key+0x23/0x50 [sctp] [ 669.826471] sctp_auth_asoc_create_secret+0xcb/0x1e0 [sctp] [ 669.826488] sctp_auth_asoc_init_active_key+0x68/0xa0 [sctp] [ 669.826505] sctp_do_sm+0x29d/0x17c0 [sctp] [...] [ 669.826629] INFO: Freed in kzfree+0x31/0x40 age=1 cpu=0 pid=18494 [ 669.826635] __slab_free+0x39/0x2a8 [ 669.826643] kfree+0x1d6/0x230 [ 669.826650] kzfree+0x31/0x40 [ 669.826666] sctp_auth_key_put+0x19/0x20 [sctp] [ 669.826681] sctp_assoc_update+0x1ee/0x2d0 [sctp] [ 669.826695] sctp_do_sm+0x674/0x17c0 [sctp] Since this only triggers in some collision-cases with AUTH, the problem at heart is that sctp_auth_key_put() on asoc->asoc_shared_key is called twice when having refcnt 1, once directly in sctp_assoc_update() and yet again from within sctp_auth_asoc_init_active_key() via sctp_assoc_update() on the already kzfree'd memory, which is also consistent with the observation of the poison decrease from 0x6b to 0x6a (note: the overwrite is detected at a later point in time when poison is checked on new allocation). Reference counting of auth keys revisited: Shared keys for AUTH chunks are being stored in endpoints and associations in endpoint_shared_keys list. On endpoint creation, a null key is being added; on association creation, all endpoint shared keys are being cached and thus cloned over to the association. struct sctp_shared_key only holds a pointer to the actual key bytes, that is, struct sctp_auth_bytes which keeps track of users internally through refcounting. Naturally, on assoc or enpoint destruction, sctp_shared_key are being destroyed directly and the reference on sctp_auth_bytes dropped. User space can add keys to either list via setsockopt(2) through struct sctp_authkey and by passing that to sctp_auth_set_key() which replaces or adds a new auth key. There, sctp_auth_create_key() creates a new sctp_auth_bytes with refcount 1 and in case of replacement drops the reference on the old sctp_auth_bytes. A key can be set active from user space through setsockopt() on the id via sctp_auth_set_active_key(), which iterates through either endpoint_shared_keys and in case of an assoc, invokes (one of various places) sctp_auth_asoc_init_active_key(). sctp_auth_asoc_init_active_key() computes the actual secret from local's and peer's random, hmac and shared key parameters and returns a new key directly as sctp_auth_bytes, that is asoc->asoc_shared_key, plus drops the reference if there was a previous one. The secret, which where we eventually double drop the ref comes from sctp_auth_asoc_set_secret() with intitial refcount of 1, which also stays unchanged eventually in sctp_assoc_update(). This key is later being used for crypto layer to set the key for the hash in crypto_hash_setkey() from sctp_auth_calculate_hmac(). To close the loop: asoc->asoc_shared_key is freshly allocated secret material and independant of the sctp_shared_key management keeping track of only shared keys in endpoints and assocs. Hence, also commit 4184b2a7 ("net: sctp: fix memory leak in auth key management") is independant of this bug here since it concerns a different layer (though same structures being used eventually). asoc->asoc_shared_key is reference dropped correctly on assoc destruction in sctp_association_free() and when active keys are being replaced in sctp_auth_asoc_init_active_key(), it always has a refcount of 1. Hence, it's freed prematurely in sctp_assoc_update(). Simple fix is to remove that sctp_auth_key_put() from there which fixes these panics. Fixes: 730fc3d0 ("[SCTP]: Implete SCTP-AUTH parameter processing") Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 6088beef ] NAPI poll logic now enforces that a poller returns exactly the budget when it wants to be called again. If a driver limits TX completion, it has to return budget as well when the limit is hit, not the number of received packets. Reported-and-tested-by:
Mike Galbraith <umgwanakikbuti@gmail.com> Signed-off-by:
Manish Chopra <manish.chopra@qlogic.com> Signed-off-by:
-
Hagen Paul Pfeifer authored
[ Upstream commit 9d289715 ] Reduce the attack vector and stop generating IPv6 Fragment Header for paths with an MTU smaller than the minimum required IPv6 MTU size (1280 byte) - called atomic fragments. See IETF I-D "Deprecating the Generation of IPv6 Atomic Fragments" [1] for more information and how this "feature" can be misused. [1] https://tools.ietf.org/html/draft-ietf-6man-deprecate-atomfrag-generation-00Signed-off-by:
Fernando Gont <fgont@si6networks.com> Signed-off-by:
Hagen Paul Pfeifer <hagen@jauu.net> Acked-by:
-
Eric Dumazet authored
[ Upstream commit ac64da0b ] softnet_data.input_pkt_queue is protected by a spinlock that we must hold when transferring packets from victim queue to an active one. This is because other cpus could still be trying to enqueue packets into victim queue. A second problem is that when we transfert the NAPI poll_list from victim to current cpu, we absolutely need to special case the percpu backlog, because we do not want to add complex locking to protect process_queue : Only owner cpu is allowed to manipulate it, unless cpu is offline. Based on initial patch from Prasad Sodagudi & Subash Abhinov Kasiviswanathan. This version is better because we do not slow down packet processing, only make migration safer. Reported-by:
Prasad Sodagudi <psodagud@codeaurora.org> Reported-by:
-
Willem de Bruijn authored
[ Upstream commit f812116b ] The sockaddr is returned in IP(V6)_RECVERR as part of errhdr. That structure is defined and allocated on the stack as struct { struct sock_extended_err ee; struct sockaddr_in(6) offender; } errhdr; The second part is only initialized for certain SO_EE_ORIGIN values. Always initialize it completely. An MTU exceeded error on a SOCK_RAW/IPPROTO_RAW is one example that would return uninitialized bytes. Signed-off-by:
Willem de Bruijn <willemb@google.com> ---- Also verified that there is no padding between errhdr.ee and errhdr.offender that could leak additional kernel data. Acked-by:
-
- 11 Feb, 2015 1 commit
-
-
Greg Kroah-Hartman authored
-
