- 29 Jun, 2018 3 commits
-
-
git://git.infradead.org/nvmeJens Axboe authored
Pull single NVMe fix from Christoph. * 'nvme-4.18' of git://git.infradead.org/nvme: nvme-rdma: fix possible double free of controller async event buffer
-
Bart Van Assche authored
Fix the test that verifies whether bio_op(bio) represents a discard or write zeroes operation. Compile-tested only. Cc: Philipp Reisner <philipp.reisner@linbit.com> Cc: Lars Ellenberg <lars.ellenberg@linbit.com> Fixes: 7435e901 ("drbd: zero-out partial unaligned discards on local backend") Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Jens Axboe authored
Some devices have different queue limits depending on the type of IO. A classic case is SATA NCQ, where some commands can queue, but others cannot. If we have NCQ commands inflight and encounter a non-queueable command, the driver returns busy. Currently we attempt to dispatch more from the scheduler, if we were able to queue some commands. But for the case where we ended up stopping due to BUSY, we should not attempt to retrieve more from the scheduler. If we do, we can get into a situation where we attempt to queue a non-queueable command, get BUSY, then successfully retrieve more commands from that scheduler and queue those. This can repeat forever, starving the non-queuable command indefinitely. Fix this by NOT attempting to pull more commands from the scheduler, if we get a BUSY return. This should also be more optimal in terms of letting requests stay in the scheduler for as long as possible, if we get a BUSY due to the regular out-of-tags condition. Reviewed-by:
Omar Sandoval <osandov@fb.com> Reviewed-by:
Ming Lei <ming.lei@redhat.com> Signed-off-by:
-
- 28 Jun, 2018 2 commits
-
-
Bart Van Assche authored
This patch avoids that removing a path controlled by the dm-mpath driver while mkfs is running triggers the following kernel bug: kernel BUG at block/blk-core.c:3347! invalid opcode: 0000 [#1] PREEMPT SMP KASAN CPU: 20 PID: 24369 Comm: mkfs.ext4 Not tainted 4.18.0-rc1-dbg+ #2 RIP: 0010:blk_end_request_all+0x68/0x70 Call Trace: <IRQ> dm_softirq_done+0x326/0x3d0 [dm_mod] blk_done_softirq+0x19b/0x1e0 __do_softirq+0x128/0x60d irq_exit+0x100/0x110 smp_call_function_single_interrupt+0x90/0x330 call_function_single_interrupt+0xf/0x20 </IRQ> Fixes: f9d03f96 ("block: improve handling of the magic discard payload") Reviewed-by:Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Sagi Grimberg authored
If reconnect/reset failed where the controller async event buffer was freed, we might end up freeing it again as we call nvme_rdma_destroy_admin_queue again in the remove path. Given that the sequence is guaranteed to serialize by .ctrl_stop, we simply set ctrl->async_event_sqe.data to NULL and don't free it in future visits. Reported-by:
Max Gurtovoy <maxg@mellanox.com> Tested-by:
Sagi Grimberg <sagi@grimberg.me> Signed-off-by:
-
- 26 Jun, 2018 1 commit
-
-
Keith Busch authored
A device may have boundary restrictions where the number of sectors between boundaries exceeds its max transfer size. In this case, we need to cap the max size to the smaller of the two limits. Reported-by:
Jitendra Bhivare <jitendra.bhivare@broadcom.com> Tested-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
Keith Busch <keith.busch@intel.com> Signed-off-by:
-
- 23 Jun, 2018 1 commit
-
-
Bart Van Assche authored
Make sure that RQF_TIMED_OUT is cleared when a request is reused after a block driver timeout handler has returned BLK_EH_DONE. Fixes: da661267 ("blk-mq: don't time out requests again that are in the timeout handler") Signed-off-by:
-
- 22 Jun, 2018 3 commits
-
-
Jan Kara authored
syzbot is reporting NULL pointer dereference at wb_workfn() [1] due to wb->bdi->dev being NULL. And Dmitry confirmed that wb->state was WB_shutting_down after wb->bdi->dev became NULL. This indicates that unregister_bdi() failed to call wb_shutdown() on one of wb objects. The problem is in cgwb_bdi_unregister() which does cgwb_kill() and thus drops bdi's reference to wb structures before going through the list of wbs again and calling wb_shutdown() on each of them. This way the loop iterating through all wbs can easily miss a wb if that wb has already passed through cgwb_remove_from_bdi_list() called from wb_shutdown() from cgwb_release_workfn() and as a result fully shutdown bdi although wb_workfn() for this wb structure is still running. In fact there are also other ways cgwb_bdi_unregister() can race with cgwb_release_workfn() leading e.g. to use-after-free issues: CPU1 CPU2 cgwb_bdi_unregister() cgwb_kill(*slot); cgwb_release() queue_work(cgwb_release_wq, &wb->release_work); cgwb_release_workfn() wb = list_first_entry(&bdi->wb_list, ...) spin_unlock_irq(&cgwb_lock); wb_shutdown(wb); ... kfree_rcu(wb, rcu); wb_shutdown(wb); -> oops use-after-free We solve these issues by synchronizing writeback structure shutdown from cgwb_bdi_unregister() with cgwb_release_workfn() using a new mutex. That way we also no longer need synchronization using WB_shutting_down as the mutex provides it for CONFIG_CGROUP_WRITEBACK case and without CONFIG_CGROUP_WRITEBACK wb_shutdown() can be called only once from bdi_unregister(). Reported-by:syzbot <syzbot+4a7438e774b21ddd8eca@syzkaller.appspotmail.com> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Geert Uytterhoeven authored
Remove dependencies on HAS_DMA where a Kconfig symbol depends on another symbol that implies HAS_DMA, and, optionally, on "|| COMPILE_TEST". In most cases this other symbol is an architecture or platform specific symbol, or PCI. Generic symbols and drivers without platform dependencies keep their dependencies on HAS_DMA, to prevent compiling subsystems or drivers that cannot work anyway. This simplifies the dependencies, and allows to improve compile-testing. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by:
Mark Brown <broonie@kernel.org> Acked-by:
Robin Murphy <robin.murphy@arm.com> Reviewed-by:
Matias Bjørling <mb@lightnvm.io> Signed-off-by:
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe fixes from Christoph: "Various relatively small fixes, mostly to fix error handling of various sorts." * 'nvme-4.18' of git://git.infradead.org/nvme: nvme-pci: limit max IO size and segments to avoid high order allocations nvme-pci: move nvme_kill_queues to nvme_remove_dead_ctrl nvme-fc: release io queues to allow fast fail nvmet: reset keep alive timer in controller enable nvme-rdma: don't override opts->queue_size nvme-rdma: Fix command completion race at error recovery nvme-rdma: fix possible free of a non-allocated async event buffer nvme-rdma: fix possible double free condition when failing to create a controller
-
- 21 Jun, 2018 4 commits
-
-
Jens Axboe authored
nvme requires an sg table allocation for each request. If the request is large, then the allocation can become quite large. For instance, with our default software settings of 1280KB IO size, we'll need 10248 bytes of sg table. That turns into a 2nd order allocation, which we can't always guarantee. If we fail the allocation, blk-mq will retry it later. But there's no guarantee that we'll EVER be able to allocate that much contigious memory. Limit the IO size such that we never need more than a single page of memory. That's a lot faster and more reliable. Then back that allocation with a mempool, so that we know we'll always be able to succeed the allocation at some point. Signed-off-by:
-
Jianchao Wang authored
There is race between nvme_remove and nvme_reset_work that can lead to io hang. nvme_remove nvme_reset_work -> nvme_remove_dead_ctrl -> nvme_dev_disable -> quiesce request_queue -> queue remove_work -> cancel_work_sync reset_work -> nvme_remove_namespaces -> splice ctrl->namespaces nvme_remove_dead_ctrl_work -> nvme_kill_queues -> nvme_ns_remove do nothing -> blk_cleanup_queue -> blk_freeze_queue Finally, the request_queue is quiesced state when wait freeze, we will get io hang here. To fix it, move the nvme_kill_queues from nvme_remove_dead_ctrl_work to nvme_remove_dead_ctrl. Suggested-by:Keith Busch <keith.busch@linux.intel.com> Signed-off-by:
Jianchao Wang <jianchao.w.wang@oracle.com> Reviewed-by:
-
James Smart authored
Rather than leaving io queues quiesced after tearing down an association, restart them. This allows ios to be replayed, with fastfail ios terminating and non-fastfail getting into loops of retry. This follows rdma's lead. Signed-off-by:
James Smart <james.smart@broadcom.com> Reviewed-by:
Sagi Grimberg <sagi@grimber.me> Signed-off-by:
-
Doron Roberts-Kedes authored
If NBD_DISCONNECT_ON_CLOSE is set on a device, then the driver will issue a disconnect from nbd_release if the device has no remaining bdev->bd_openers. Fix ret val so reconfigure with only setting the flag succeeds. Reviewed-by:
Josef Bacik <josef@toxicpanda.com> Signed-off-by:
Doron Roberts-Kedes <doronrk@fb.com> Signed-off-by:
-
- 20 Jun, 2018 7 commits
-
-
Dan Carpenter authored
resp->num is the number of tokens in resp->tok[]. It gets set in response_parse(). So if n == resp->num then we're reading beyond the end of the data. Fixes: 455a7b23 ("block: Add Sed-opal library") Reviewed-by:
Scott Bauer <scott.bauer@intel.com> Tested-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
If rq_state == ARRAY_SIZE() then we read one element beyond the end of the blk_mq_rq_state_name_array[] array. Fixes: ec6dcf63 ("blk-mq-debugfs: Show more request state information") Reviewed-by:
-
Max Gurtuvoy authored
Controllers that are not yet enabled should not really enforce keep alive timeouts, but we still want to track a timeout and cleanup in case a host died before it enabled the controller. Hence, simply reset the keep alive timer when the controller is enabled. Suggested-by:
-
Sagi Grimberg authored
That is user argument, and theoretically controller limits can change over time (over reconnects/resets). Instead, use the sqsize controller attribute to check queue depth boundaries and use it to the tagset allocation. Signed-off-by:
-
Israel Rukshin authored
The race is between completing the request at error recovery work and rdma completions. If we cancel the request before getting the good rdma completion we get a NULL deref of the request MR at nvme_rdma_process_nvme_rsp(). When Canceling the request we return its mr to the mr pool (set mr to NULL) and also unmap its data. Canceling the requests while the rdma queues are active is not safe. Because rdma queues are active and we get good rdma completions that can use the mr pointer which may be NULL. Completing the request too soon may lead also to performing DMA to/from user buffers which might have been already unmapped. The commit fixes the race by draining the QP before starting the abort commands mechanism. Signed-off-by:
Israel Rukshin <israelr@mellanox.com> Reviewed-by:
-
Sagi Grimberg authored
If nvme_rdma_configure_admin_queue fails before we allocated the async event buffer, we will falsly free it because nvme_rdma_free_queue is freeing it. Fix it by allocating the buffer right after nvme_rdma_alloc_queue and free it right before nvme_rdma_queue_free to maintain orderly reverse cleanup sequence. Reported-by:
-
Sagi Grimberg authored
Failures after nvme_init_ctrl will defer resource cleanups to .free_ctrl when the reference is released, hence we should not free the controller queues for these failures. Fix that by moving controller queues allocation before controller initialization and correctly freeing them for failures before initialization and skip them for failures after initialization. Signed-off-by:
-
- 19 Jun, 2018 2 commits
-
-
Bart Van Assche authored
Commit 0ba99ca4 ("block: Add warning for bi_next not NULL in bio_endio()") breaks the dm driver. end_clone_bio() detects whether or not a bio is the last bio associated with a request by checking the .bi_next field. Commit 0ba99ca4 clears that field before end_clone_bio() has had a chance to inspect that field. Hence revert commit 0ba99ca4. This patch avoids that KASAN reports the following complaint when running the srp-test software (srp-test/run_tests -c -d -r 10 -t 02-mq): ================================================================== BUG: KASAN: use-after-free in bio_advance+0x11b/0x1d0 Read of size 4 at addr ffff8801300e06d0 by task ksoftirqd/0/9 CPU: 0 PID: 9 Comm: ksoftirqd/0 Not tainted 4.18.0-rc1-dbg+ #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.0.0-prebuilt.qemu-project.org 04/01/2014 Call Trace: dump_stack+0xa4/0xf5 print_address_description+0x6f/0x270 kasan_report+0x241/0x360 __asan_load4+0x78/0x80 bio_advance+0x11b/0x1d0 blk_update_request+0xa7/0x5b0 scsi_end_request+0x56/0x320 [scsi_mod] scsi_io_completion+0x7d6/0xb20 [scsi_mod] scsi_finish_command+0x1c0/0x280 [scsi_mod] scsi_softirq_done+0x19a/0x230 [scsi_mod] blk_mq_complete_request+0x160/0x240 scsi_mq_done+0x50/0x1a0 [scsi_mod] srp_recv_done+0x515/0x1330 [ib_srp] __ib_process_cq+0xa0/0xf0 [ib_core] ib_poll_handler+0x38/0xa0 [ib_core] irq_poll_softirq+0xe8/0x1f0 __do_softirq+0x128/0x60d run_ksoftirqd+0x3f/0x60 smpboot_thread_fn+0x352/0x460 kthread+0x1c1/0x1e0 ret_from_fork+0x24/0x30 Allocated by task 1918: save_stack+0x43/0xd0 kasan_kmalloc+0xad/0xe0 kasan_slab_alloc+0x11/0x20 kmem_cache_alloc+0xfe/0x350 mempool_alloc_slab+0x15/0x20 mempool_alloc+0xfb/0x270 bio_alloc_bioset+0x244/0x350 submit_bh_wbc+0x9c/0x2f0 __block_write_full_page+0x299/0x5a0 block_write_full_page+0x16b/0x180 blkdev_writepage+0x18/0x20 __writepage+0x42/0x80 write_cache_pages+0x376/0x8a0 generic_writepages+0xbe/0x110 blkdev_writepages+0xe/0x10 do_writepages+0x9b/0x180 __filemap_fdatawrite_range+0x178/0x1c0 file_write_and_wait_range+0x59/0xc0 blkdev_fsync+0x46/0x80 vfs_fsync_range+0x66/0x100 do_fsync+0x3d/0x70 __x64_sys_fsync+0x21/0x30 do_syscall_64+0x77/0x230 entry_SYSCALL_64_after_hwframe+0x49/0xbe Freed by task 9: save_stack+0x43/0xd0 __kasan_slab_free+0x137/0x190 kasan_slab_free+0xe/0x10 kmem_cache_free+0xd3/0x380 mempool_free_slab+0x17/0x20 mempool_free+0x63/0x160 bio_free+0x81/0xa0 bio_put+0x59/0x60 end_bio_bh_io_sync+0x5d/0x70 bio_endio+0x1a7/0x360 blk_update_request+0xd0/0x5b0 end_clone_bio+0xa3/0xd0 [dm_mod] bio_endio+0x1a7/0x360 blk_update_request+0xd0/0x5b0 scsi_end_request+0x56/0x320 [scsi_mod] scsi_io_completion+0x7d6/0xb20 [scsi_mod] scsi_finish_command+0x1c0/0x280 [scsi_mod] scsi_softirq_done+0x19a/0x230 [scsi_mod] blk_mq_complete_request+0x160/0x240 scsi_mq_done+0x50/0x1a0 [scsi_mod] srp_recv_done+0x515/0x1330 [ib_srp] __ib_process_cq+0xa0/0xf0 [ib_core] ib_poll_handler+0x38/0xa0 [ib_core] irq_poll_softirq+0xe8/0x1f0 __do_softirq+0x128/0x60d The buggy address belongs to the object at ffff8801300e0640 which belongs to the cache bio-0 of size 200 The buggy address is located 144 bytes inside of 200-byte region [ffff8801300e0640, ffff8801300e0708) The buggy address belongs to the page: page:ffffea0004c03800 count:1 mapcount:0 mapping:ffff88015a563a00 index:0x0 compound_mapcount: 0 flags: 0x8000000000008100(slab|head) raw: 8000000000008100 dead000000000100 dead000000000200 ffff88015a563a00 raw: 0000000000000000 0000000000330033 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff8801300e0580: fb fb fb fb fb fb fb fb fb fc fc fc fc fc fc fc ffff8801300e0600: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb >ffff8801300e0680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff8801300e0700: fb fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff8801300e0780: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ================================================================== Cc: Kent Overstreet <kent.overstreet@gmail.com> Fixes: 0ba99ca4 ("block: Add warning for bi_next not NULL in bio_endio()") Acked-by:
-
Christoph Hellwig authored
blk_mq_complete_request can only be called for blk-mq drivers, but when removing the BLK_EH_HANDLED return value, two legacy request timeout methods incorrectly got switched to call blk_mq_complete_request. Call __blk_complete_request instead to reinstance the previous behavior. For that __blk_complete_request needs to be exported. Fixes: 1fc2b62e ("scsi_transport_fc: complete requests from ->timeout") Fixes: 0df0bb08 ("null_blk: complete requests from ->timeout") Reported-by:
-
- 15 Jun, 2018 6 commits
-
-
Anatoliy Glagolev authored
The existing implementation allows races between bsg_unregister and bsg_open paths. bsg_unregister and request_queue cleanup and deletion may start and complete right after bsg_get_device (in bsg_open path) retrieves bsg_class_device and releases the mutex. Then bsg_open path touches freed memory of bsg_class_device and request_queue. One possible fix is to hold the mutex all the way through bsg_get_device instead of releasing it after bsg_class_device retrieval. Reviewed-by:
Anatoliy Glagolev <glagolig@gmail.com> Signed-off-by:
-
Christoph Hellwig authored
This function is entirely unused, so remove it and the tag_queue_busy member of struct request_queue. Signed-off-by:
-
git://git.infradead.org/nvmeJens Axboe authored
Pull NVMe fixes from Christoph: "Fix various little regressions introduced in this merge window, plus a rework of the fibre channel connect and reconnect path to share the code instead of having separate sets of bugs. Last but not least a trivial trace point addition from Hannes." * 'nvme-4.18' of git://git.infradead.org/nvme: nvme-fabrics: fix and refine state checks in __nvmf_check_ready nvme-fabrics: handle the admin-only case properly in nvmf_check_ready nvme-fabrics: refactor queue ready check blk-mq: remove blk_mq_tagset_iter nvme: remove nvme_reinit_tagset nvme-fc: fix nulling of queue data on reconnect nvme-fc: remove reinit_request routine nvme-fc: change controllers first connect to use reconnect path nvme: don't rely on the changed namespace list log nvmet: free smart-log buffer after use nvme-rdma: fix error flow during mapping request data nvme: add bio remapping tracepoint nvme: fix NULL pointer dereference in nvme_init_subsystem
-
Christoph Hellwig authored
- make sure we only allow internally generates commands in any non-live state - only allow connect commands on non-live queues when actually in the new or connecting states - treat all other non-live, non-dead states the same as a default cach-all This fixes a regression where we could not shutdown a controller orderly as we didn't allow the internal generated Property Set command, and also ensures we don't accidentally let a Connect command through in the wrong state. Signed-off-by:
-
Christoph Hellwig authored
In the ADMIN_ONLY state we don't have any I/O queues, but we should accept all admin commands without further checks. Signed-off-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
-
Christoph Hellwig authored
Move the is_connected check to the fibre channel transport, as it has no meaning for other transports. To facilitate this split out a new nvmf_fail_nonready_command helper that is called by the transport when it is asked to handle a command on a queue that is not ready. Also avoid a function call for the queue live fast path by inlining the check. Signed-off-by:
-
- 14 Jun, 2018 6 commits
-
-
Christoph Hellwig authored
Unused now that nvme stopped using it. Signed-off-by:
-
Christoph Hellwig authored
Unused now that all transports stopped using it. Signed-off-by:
-
James Smart authored
The reconnect path is calling the init routines to clear a queue structure. But the queue structure has state that perhaps needs to persist as long as the controller is live. Remove the nvme_fc_init_queue() calls on reconnect. The nvme_fc_free_queue() calls will clear state bits and reset any relevant queue state for a new connection. Signed-off-by:
Hannes Reinecke <hare@suse.com> Signed-off-by:
-
James Smart authored
The reinit_request routine is not necessary. Remove support for the op callback. As all that nvme_reinit_tagset() does is itterate and call the reinit routine, it too has no purpose. Remove the call. Signed-off-by:
-
Christoph Hellwig authored
We can currently call the timeout handler again on a request that has already been handed over to the timeout handler. Prevent that with a new flag. Fixes: 12f5b931 ("blk-mq: Remove generation seqeunce") Reported-by:
Andrew Randrianasulu <randrianasulu@gmail.com> Tested-by:
-
James Smart authored
Current code follows the framework that has been in the transports from the beginning where initial link-side controller connect occurs as part of "creating the controller". Thus that first connect fully talks to the controller and obtains values that can then be used in for blk-mq setup, etc. It also means that everything about the controller is fully know before the "create controller" call returns. This has several weaknesses: - The initial create_ctrl call made by the cli will block for a long time as wire transactions are performed synchronously. This delay becomes longer if errors occur or connectivity is lost and retries need to be performed. - Code wise, it means there is a separate connect path for initial controller connect vs the (same) steps used in the reconnect path. - And as there's separate paths, it means there's separate error handling and retry logic. It also plays havoc with the NEW state (should transition out of it after successful initial connect) vs the RESETTING and CONNECTING (reconnect) states that want to be transitioned to on error. - As there's separate paths, to recover from errors and disruptions, it requires separate recovery/retry paths as well and can severely convolute the controller state. This patch reworks the fc transport to use the same connect paths for the initial connection as it uses for reconnect. This makes a single path for error recovery and handling. This patch: - Removes the driving of the initial connect and replaces it with a state transition to CONNECTING and initiating the reconnect thread. A dummy state transition of RESETTING had to be traversed as a direct transtion of NEW->CONNECTING is not allowed. Given that the controller is "new", the RESETTING transition is a simple no-op. Once in the reconnecting thread, the normal behaviors of ctrl_loss_tmo (max_retries * connect_delay) and dev_loss_tmo will apply before the controller is torn down. - Only if the state transitions couldn't be traversed and the reconnect thread not scheduled, will the controller be torn down while in create_ctrl. - The prior code used the controller state of NEW to indicate whether request queues had been initialized or not. For the admin queue, the request queue is always created, so there's no need to check a state. For IO queues, change to tracking whether a successful io request queue create has occurred (e.g. 1st successful connect). - The initial controller id is initialized to the dynamic controller id used in the initial connect message. It will be overwritten by the real controller id once the controller is connected on the wire. Signed-off-by:
-
- 13 Jun, 2018 1 commit
-
-
Christoph Hellwig authored
Don't optimize our namespace rescan based on the changed namespace list log page as userspace might have changed the content through reading it. Suggested-by:
-
- 11 Jun, 2018 4 commits
-
-
Chaitanya Kulkarni authored
Free smart-log buffer allocated in the function after use. Signed-off-by:
Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com> Signed-off-by:
-
Max Gurtovoy authored
After dma mapping the sgl, we map the sgl to nvme sgl descriptor. In case of failure during the last mapping we never dma unmap the sgl. Signed-off-by:
-
Hannes Reinecke authored
Adding a tracepoint to trace bio remapping for native nvme multipath. Signed-off-by:
-
Israel Rukshin authored
When using nvme-pci driver the nvmf_ctrl_options is NULL. There is no need to check for discovery_nqn flag at non-fabrics controller. Fixes: 181303d0 ("nvme-fabrics: allow duplicate connections to the discovery controller") Signed-off-by:
-
