Idle bo's PTE needs to be re-created when resetting VM state machine.
Set idle bo's vm_bo as moved to mark it as invalid.

Fixes: 55bf196f ("drm/amdgpu: reset VM when an error is detected")
Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why]
Driver incorrectly checks if pointer variable OutBpp is null instead of
if the value being pointed to is zero.

[How]
Dereference OutBpp before checking for a value of zero.
Reviewed-by: Chaitanya Dhere <chaitanya.dhere@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Josip Pavic <josip.pavic@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[why & how]
we have two SSC_En:
we get ssc_info from dce_info for MPLL_SSC_EN.
we used to call VBIOS cmdtbl's smu_info's SS persentage for DPRECLK SS info,
is used for DP AUDIO and VBIOS' smu_info table was from systemIntegrationInfoTable.

since dcn35 VBIOS removed smu_info, driver need to use integrationInfotable directly.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Charlene Liu <charlene.liu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why & how]
Refactor dc_is_dmub_outbox_supported() a bit and add case for dcn35 to
register dmub outbox notification irq to handle usb4 relevant hpd event.
Reviewed-by: Roman Li <roman.li@amd.com>
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

There have recently been changes that break backwards compatibility,
that were introduced into DMUB firmware (for DCN32x) concerning FPO and
SubVP. So, since those are just power optimization features, we can just
disable them unless the user is using a new enough version of DMUB
firmware.

Cc: stable@vger.kernel.org
Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2870
Fixes: ed6e2782 ("drm/amd/display: For cursor P-State allow for SubVP")
Reported-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com>
Closes: https://lore.kernel.org/r/CABXGCsNRb0QbF2pKLJMDhVOKxyGD6-E+8p-4QO6FOWa6zp22_A@mail.gmail.com/Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

On gfx943 APU there is no VRAM and page migration, queue CWSR area, svm
range with always mapped flag, is not mapped to GPU correctly. This
works fine if retry fault on CWSR area can be recovered, but could cause
deadlock if there is another retry fault recover waiting for CWSR to
finish.

Fix this by mapping svm range with always mapped flag to GPU with ACCESS
attribute if XNACK ON.

There is side effect, because all GPUs have ACCESS attribute by default
on new svm range with XNACK on, the CWSR area will be mapped to all GPUs
after this change. This side effect will be fixed with Thunk change to
set CWSR svm range with ACCESS_IN_PLACE attribute on the GPU that user
queue is created.
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Description]
Revert commit fec05adc ("drm/amd/display: Use channel_width = 2 for vram table 3.0")
Because the issue is being fixed from VBIOS side.
Reviewed-by: Samson Tam <samson.tam@amd.com>
Acked-by: Wayne Lin <wayne.lin@amd.com>
Signed-off-by: Alvin Lee <alvin.lee2@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Pull perf fix from Borislav Petkov:

 - Avoid iterating over newly created group leader event's siblings
   because there are none, and thus prevent a lockdep splat

* tag 'perf_urgent_for_v6.7_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf: Fix perf_event_validate_size() lockdep splat

Pull btrfs fix from David Sterba:
 "One more fix that verifies that the snapshot source is a root, same
  check is also done in user space but should be done by the ioctl as
  well"

* tag 'for-6.7-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: do not allow non subvolume root targets for snapshot

Pull soundwire fixes from Vinod Koul:

 - Null pointer dereference for mult link in core

 - AC timing fix in intel driver

* tag 'soundwire-6.7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
  soundwire: intel_ace2x: fix AC timing setting for ACE2.x
  soundwire: stream: fix NULL pointer dereference for multi_link

Pull phy fixes from Vinod Koul:

  - register offset fix for TI driver

  - mediatek driver minimal supported frequency fix

  - negative error code in probe fix for sunplus driver

* tag 'phy-fixes-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
  phy: sunplus: return negative error code in sp_usb_phy_probe
  phy: mediatek: mipi: mt8183: fix minimal supported frequency
  phy: ti: gmii-sel: Fix register offset when parent is not a syscon node

Pull dmaengine fixes from Vinod Koul:

 - SPI PDMA data fix for TI k3-psil drivers

 - suspend fix, pointer check, logic for arbitration fix and channel
   leak fix in fsl-edma driver

 - couple of fixes in idxd driver for GRPCFG descriptions and int_handle
   field handling

 - single fix for stm32 driver for bitfield overflow

* tag 'dmaengine-fix-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
  dmaengine: fsl-edma: fix DMA channel leak in eDMAv4
  dmaengine: fsl-edma: fix wrong pointer check in fsl_edma3_attach_pd()
  dmaengine: idxd: Fix incorrect descriptions for GRPCFG register
  dmaengine: idxd: Protect int_handle field in hw descriptor
  dmaengine: stm32-dma: avoid bitfield overflow assertion
  dmaengine: fsl-edma: Add judgment on enabling round robin arbitration
  dmaengine: fsl-edma: Do not suspend and resume the masked dma channel when the system is sleeping
  dmaengine: ti: k3-psil-am62a: Fix SPI PDMA data
  dmaengine: ti: k3-psil-am62: Fix SPI PDMA data

Pull CXL (Compute Express Link) fixes from Dan Williams:
 "A collection of CXL fixes.

  The touch outside of drivers/cxl/ is for a helper that allocates
  physical address space. Device hotplug tests showed that the driver
  failed to utilize (skipped over) valid capacity when allocating a new
  memory region. Outside of that, new tests uncovered a small crop of
  lockdep reports.

  There is also some miscellaneous error path and leak fixups that are
  not urgent, but useful to cleanup now.

   - Fix alloc_free_mem_region()'s scan for address space, prevent false
     negative out-of-space events

   - Fix sleeping lock acquisition from CXL trace event (atomic context)

   - Fix put_device() like for the new CXL PMU driver

   - Fix wrong pointer freed on error path

   - Fixup several lockdep reports (missing lock hold) from new
     assertion in cxl_num_decoders_committed() and new tests"

* tag 'cxl-fixes-6.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
  cxl/pmu: Ensure put_device on pmu devices
  cxl/cdat: Free correct buffer on checksum error
  cxl/hdm: Fix dpa translation locking
  kernel/resource: Increment by align value in get_free_mem_region()
  cxl: Add cxl_num_decoders_committed() usage to cxl_test
  cxl/memdev: Hold region_rwsem during inject and clear poison ops
  cxl/core: Always hold region_rwsem while reading poison lists
  cxl/hdm: Fix a benign lockdep splat

Pull EDAC fix from Borislav Petkov:

 - A single fix for the EDAC Versal driver to read out register fields
   properly

* tag 'edac_urgent_for_v6.7_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/versal: Read num_csrows and num_chans using the correct bitfield macro

Pull powerpc fixes from Michael Ellerman:

 - Fix a bug where heavy VAS (accelerator) usage could race with
   partition migration and prevent the migration from completing.

 - Update MAINTAINERS to add Aneesh & Naveen.

Thanks to Haren Myneni.

* tag 'powerpc-6.7-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  MAINTAINERS: powerpc: Add Aneesh & Naveen
  powerpc/pseries/vas: Migration suspend waits for no in-progress open windows

Pull clk fixes from Stephen Boyd:
 "A handful of clk fixes, mostly in the rockchip clk driver:

   - Fix a clk name, clk parent, and a register for a clk gate in the
     Rockchip rk3128 clk driver

   - Add a PLL frequency on Rockchip rk3568 to fix some display
     artifacts

   - Fix a kbuild dependency for Qualcomm's SM_CAMCC_8550 symbol so that
     it isn't possible to select the associated GCC driver"

* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
  clk: rockchip: rk3128: Fix SCLK_SDMMC's clock name
  clk: rockchip: rk3128: Fix aclk_peri_src's parent
  clk: qcom: Fix SM_CAMCC_8550 dependencies
  clk: rockchip: rk3128: Fix HCLK_OTG gate register
  clk: rockchip: rk3568: Add PLL rate for 292.5MHz

Pull tracing fixes from Steven Rostedt:

 - Fix eventfs to check creating new files for events with names greater
   than NAME_MAX. The eventfs lookup needs to check the return result of
   simple_lookup().

 - Fix the ring buffer to check the proper max data size. Events must be
   able to fit on the ring buffer sub-buffer, if it cannot, then it
   fails to be written and the logic to add the event is avoided. The
   code to check if an event can fit failed to add the possible absolute
   timestamp which may make the event not be able to fit. This causes
   the ring buffer to go into an infinite loop trying to find a
   sub-buffer that would fit the event. Luckily, there's a check that
   will bail out if it looped over a 1000 times and it also warns.

   The real fix is not to add the absolute timestamp to an event that is
   starting at the beginning of a sub-buffer because it uses the
   sub-buffer timestamp.

   By avoiding the timestamp at the start of the sub-buffer allows
   events that pass the first check to always find a sub-buffer that it
   can fit on.

 - Have large events that do not fit on a trace_seq to print "LINE TOO
   BIG" like it does for the trace_pipe instead of what it does now
   which is to silently drop the output.

 - Fix a memory leak of forgetting to free the spare page that is saved
   by a trace instance.

 - Update the size of the snapshot buffer when the main buffer is
   updated if the snapshot buffer is allocated.

 - Fix ring buffer timestamp logic by removing all the places that tried
   to put the before_stamp back to the write stamp so that the next
   event doesn't add an absolute timestamp. But each of these updates
   added a race where by making the two timestamp equal, it was
   validating the write_stamp so that it can be incorrectly used for
   calculating the delta of an event.

 - There's a temp buffer used for printing the event that was using the
   event data size for allocation when it needed to use the size of the
   entire event (meta-data and payload data)

 - For hardening, use "%.*s" for printing the trace_marker output, to
   limit the amount that is printed by the size of the event. This was
   discovered by development that added a bug that truncated the '\0'
   and caused a crash.

 - Fix a use-after-free bug in the use of the histogram files when an
   instance is being removed.

 - Remove a useless update in the rb_try_to_discard of the write_stamp.
   The before_stamp was already changed to force the next event to add
   an absolute timestamp that the write_stamp is not used. But the
   write_stamp is modified again using an unneeded 64-bit cmpxchg.

 - Fix several races in the 32-bit implementation of the
   rb_time_cmpxchg() that does a 64-bit cmpxchg.

 - While looking at fixing the 64-bit cmpxchg, I noticed that because
   the ring buffer uses normal cmpxchg, and this can be done in NMI
   context, there's some architectures that do not have a working
   cmpxchg in NMI context. For these architectures, fail recording
   events that happen in NMI context.

* tag 'trace-v6.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  ring-buffer: Do not record in NMI if the arch does not support cmpxchg in NMI
  ring-buffer: Have rb_time_cmpxchg() set the msb counter too
  ring-buffer: Fix 32-bit rb_time_read() race with rb_time_cmpxchg()
  ring-buffer: Fix a race in rb_time_cmpxchg() for 32 bit archs
  ring-buffer: Remove useless update to write_stamp in rb_try_to_discard()
  ring-buffer: Do not try to put back write_stamp
  tracing: Fix uaf issue when open the hist or hist_debug file
  tracing: Add size check when printing trace_marker output
  ring-buffer: Have saved event hold the entire event
  ring-buffer: Do not update before stamp when switching sub-buffers
  tracing: Update snapshot buffer on resize if it is allocated
  ring-buffer: Fix memory leak of free page
  eventfs: Fix events beyond NAME_MAX blocking tasks
  tracing: Have large events show up as '[LINE TOO BIG]' instead of nothing
  ring-buffer: Fix writing to the buffer with max_data_size

Pull arm64 fixes from Catalin Marinas:

 - Arm CMN perf: fix the DTC allocation failure path which can end up
   erroneously clearing live counters

 - arm64/mm: fix hugetlb handling of the dirty page state leading to a
   continuous fault loop in user on hardware without dirty bit
   management (DBM). That's caused by the dirty+writeable information
   not being properly preserved across a series of mprotect(PROT_NONE),
   mprotect(PROT_READ|PROT_WRITE)

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: mm: Always make sw-dirty PTEs hw-dirty in pte_modify
  perf/arm-cmn: Fail DTC counter allocation correctly

Pull pci fixes from Bjorn Helgaas:

 - Limit Max_Read_Request_Size (MRRS) on some MIPS Loongson systems
   because they don't all support MRRS > 256, and firmware doesn't
   always initialize it correctly, which meant some PCIe devices didn't
   work (Jiaxun Yang)

 - Add and use pci_enable_link_state_locked() to prevent potential
   deadlocks in vmd and qcom drivers (Johan Hovold)

 - Revert recent (v6.5) acpiphp resource assignment changes that fixed
   issues with hot-adding devices on a root bus or with large BARs, but
   introduced new issues with GPU initialization and hot-adding SCSI
   disks in QEMU VMs and (Bjorn Helgaas)

* tag 'pci-v6.7-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  Revert "PCI: acpiphp: Reassign resources on bridge if necessary"
  PCI/ASPM: Add pci_disable_link_state_locked() lockdep assert
  PCI/ASPM: Clean up __pci_disable_link_state() 'sem' parameter
  PCI: qcom: Clean up ASPM comment
  PCI: qcom: Fix potential deadlock when enabling ASPM
  PCI: vmd: Fix potential deadlock when enabling ASPM
  PCI/ASPM: Add pci_enable_link_state_locked()
  PCI: loongson: Limit MRRS to 256

Our btrfs subvolume snapshot <source> <destination> utility enforces
that <source> is the root of the subvolume, however this isn't enforced
in the kernel.  Update the kernel to also enforce this limitation to
avoid problems with other users of this ioctl that don't have the
appropriate checks in place.
Reported-by: Martin Michaelis <code@mgjm.de>
CC: stable@vger.kernel.org # 4.14+
Reviewed-by: Neal Gompa <neal@gompa.dev>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

This code is rarely (never?) enabled by distros, and it hasn't caught
anything in decades. Let's kill off this legacy debug code.
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

There are multiple ways to grab references to credentials, and the only
protection we have against overflowing it is the memory required to do
so.

With memory sizes only moving in one direction, let's bump the reference
count to 64-bit and move it outside the realm of feasibly overflowing.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This reverts commit 40613da5 and the
subsequent fix to it:

  cc22522f ("PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root bus")

40613da5 fixed a problem where hot-adding a device with large BARs
failed if the bridge windows programmed by firmware were not large enough.

cc22522f ("PCI: acpiphp: Use pci_assign_unassigned_bridge_resources()
only for non-root bus") fixed a problem with 40613da5: an ACPI hot-add
of a device on a PCI root bus (common in the virt world) or firmware
sending ACPI Bus Check to non-existent Root Ports (e.g., on Dell Inspiron
7352/0W6WV0) caused a NULL pointer dereference and suspend/resume hangs.

Unfortunately the combination of 40613da5 and cc22522f caused other
problems:

  - Fiona reported that hot-add of SCSI disks in QEMU virtual machine fails
    sometimes.

  - Dongli reported a similar problem with hot-add of SCSI disks.

  - Jonathan reported a console freeze during boot on bare metal due to an
    error in radeon GPU initialization.

Revert both patches to avoid adding these problems.  This means we will
again see the problems with hot-adding devices with large BARs and the NULL
pointer dereferences and suspend/resume issues that 40613da5 and
cc22522f were intended to fix.

Fixes: 40613da5 ("PCI: acpiphp: Reassign resources on bridge if necessary")
Fixes: cc22522f ("PCI: acpiphp: Use pci_assign_unassigned_bridge_resources() only for non-root bus")
Reported-by: Fiona Ebner <f.ebner@proxmox.com>
Closes: https://lore.kernel.org/r/9eb669c0-d8f2-431d-a700-6da13053ae54@proxmox.comReported-by: Dongli Zhang <dongli.zhang@oracle.com>
Closes: https://lore.kernel.org/r/3c4a446a-b167-11b8-f36f-d3c1b49b42e9@oracle.comReported-by: Jonathan Woithe <jwoithe@just42.net>
Closes: https://lore.kernel.org/r/ZXpaNCLiDM+Kv38H@marvin.atrad.com.auSigned-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Cc: <stable@vger.kernel.org>

Pull io_uring fixes from Jens Axboe:
 "Just two minor fixes:

   - Fix for the io_uring socket option commands using the wrong value
     on some archs (Al)

   - Tweak to the poll lazy wake enable (me)"

* tag 'io_uring-6.7-2023-12-15' of git://git.kernel.dk/linux:
  io_uring/cmd: fix breakage in SOCKET_URING_OP_SIOC* implementation
  io_uring/poll: don't enable lazy wake for POLLEXCLUSIVE

Merge tag 'mm-hotfixes-stable-2023-12-15-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull misc fixes from Andrew Morton:
 "17 hotfixes. 8 are cc:stable and the other 9 pertain to post-6.6
  issues"

* tag 'mm-hotfixes-stable-2023-12-15-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
  mm/mglru: reclaim offlined memcgs harder
  mm/mglru: respect min_ttl_ms with memcgs
  mm/mglru: try to stop at high watermarks
  mm/mglru: fix underprotected page cache
  mm/shmem: fix race in shmem_undo_range w/THP
  Revert "selftests: error out if kernel header files are not yet built"
  crash_core: fix the check for whether crashkernel is from high memory
  x86, kexec: fix the wrong ifdeffery CONFIG_KEXEC
  sh, kexec: fix the incorrect ifdeffery and dependency of CONFIG_KEXEC
  mips, kexec: fix the incorrect ifdeffery and dependency of CONFIG_KEXEC
  m68k, kexec: fix the incorrect ifdeffery and build dependency of CONFIG_KEXEC
  loongarch, kexec: change dependency of object files
  mm/damon/core: make damon_start() waits until kdamond_fn() starts
  selftests/mm: cow: print ksft header before printing anything else
  mm: fix VMA heap bounds checking
  riscv: fix VMALLOC_START definition
  kexec: drop dependency on ARCH_SUPPORTS_KEXEC from CRASH_DUMP

Pull sound fixes from Takashi Iwai:
 "A collection of HD-audio quirks for TAS2781 codec and device-specific
  workarounds"

* tag 'sound-6.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/tas2781: reset the amp before component_add
  ALSA: hda/tas2781: call cleanup functions only once
  ALSA: hda/tas2781: handle missing EFI calibration data
  ALSA: hda/tas2781: leave hda_component in usable state
  ALSA: hda/realtek: Apply mute LED quirk for HP15-db
  ALSA: hda/hdmi: add force-connect quirks for ASUSTeK Z170 variants
  ALSA: hda/hdmi: add force-connect quirk for NUC5CPYB

Pull drm fixes from Dave Airlie:
 "More regular fixes, amdgpu, i915, mediatek and nouveau are most of
  them this week. Nothing too major, then a few misc bits and pieces in
  core, panel and ivpu.

  drm:
   - fix uninit problems in crtc
   - fix fd ownership check
   - edid: add modes in fallback paths

  panel:
   - move LG panel into DSI yaml
   - ltk050h3146w: set burst mode

  mediatek:
   - mtk_disp_gamma: Fix breakage due to merge issue
   - fix kernel oops if no crtc is found
   - Add spinlock for setting vblank event in atomic_begin
   - Fix access violation in mtk_drm_crtc_dma_dev_get

  i915:
   - Fix selftest engine reset count storage for multi-tile
   - Fix out-of-bounds reads for engine reset counts
   - Fix ADL+ remapped stride with CCS
   - Fix intel_atomic_setup_scalers() plane_state handling
   - Fix ADL+ tiled plane stride when the POT stride is smaller than the original
   - Fix eDP 1.4 rate select method link configuration

  amdgpu:
   - Fix suspend fix that got accidently mangled last week
   - Fix OD regression
   - PSR fixes
   - OLED Backlight regression fix
   - JPEG 4.0.5 fix
   - Misc display fixes
   - SDMA 5.2 fix
   - SDMA 2.4 regression fix
   - GPUVM race fix

  nouveau:
   - fix gk20a instobj hierarchy
   - fix headless iors inheritance regression

  ivpu:
   - fix WA initialisation"

* tag 'drm-fixes-2023-12-15' of git://anongit.freedesktop.org/drm/drm: (31 commits)
  drm/nouveau/kms/nv50-: Don't allow inheritance of headless iors
  drm/nouveau: Fixup gk20a instobj hierarchy
  drm/amdgpu: warn when there are still mappings when a BO is destroyed v2
  drm/amdgpu: fix tear down order in amdgpu_vm_pt_free
  drm/amd: Fix a probing order problem on SDMA 2.4
  drm/amdgpu/sdma5.2: add begin/end_use ring callbacks
  drm/panel: ltk050h3146w: Set burst mode for ltk050h3148w
  dt-bindings: panel-simple-dsi: move LG 5" HD TFT LCD panel into DSI yaml
  drm/amd/display: Disable PSR-SU on Parade 0803 TCON again
  drm/amd/display: Populate dtbclk from bounding box
  drm/amd/display: Revert "Fix conversions between bytes and KB"
  drm/amdgpu/jpeg: configure doorbell for each playback
  drm/amd/display: Restore guard against default backlight value < 1 nit
  drm/amd/display: fix hw rotated modes when PSR-SU is enabled
  drm/amd/pm: fix pp_*clk_od typo
  drm/amdgpu: fix buffer funcs setting order on suspend harder
  drm/mediatek: Fix access violation in mtk_drm_crtc_dma_dev_get
  drm/edid: also call add modes in EDID connector update fallback
  drm/i915/edp: don't write to DP_LINK_BW_SET when using rate select
  drm/i915: Fix ADL+ tiled plane stride when the POT stride is smaller than the original
  ...

As the ring buffer recording requires cmpxchg() to work, if the
architecture does not support cmpxchg in NMI, then do not do any recording
within an NMI.

Link: https://lore.kernel.org/linux-trace-kernel/20231213175403.6fc18540@gandalf.local.home

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The rb_time_cmpxchg() on 32-bit architectures requires setting three
32-bit words to represent the 64-bit timestamp, with some salt for
synchronization. Those are: msb, top, and bottom

The issue is, the rb_time_cmpxchg() did not properly salt the msb portion,
and the msb that was written was stale.

Link: https://lore.kernel.org/linux-trace-kernel/20231215084114.20899342@rorschach.local.home

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Fixes: f03f2abc ("ring-buffer: Have 32 bit time stamps use all 64 bits")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The following race can cause rb_time_read() to observe a corrupted time
stamp:

rb_time_cmpxchg()
[...]
        if (!rb_time_read_cmpxchg(&t->msb, msb, msb2))
                return false;
        if (!rb_time_read_cmpxchg(&t->top, top, top2))
                return false;
<interrupted before updating bottom>
__rb_time_read()
[...]
        do {
                c = local_read(&t->cnt);
                top = local_read(&t->top);
                bottom = local_read(&t->bottom);
                msb = local_read(&t->msb);
        } while (c != local_read(&t->cnt));

        *cnt = rb_time_cnt(top);

        /* If top and msb counts don't match, this interrupted a write */
        if (*cnt != rb_time_cnt(msb))
                return false;
          ^ this check fails to catch that "bottom" is still not updated.

So the old "bottom" value is returned, which is wrong.

Fix this by checking that all three of msb, top, and bottom 2-bit cnt
values match.

The reason to favor checking all three fields over requiring a specific
update order for both rb_time_set() and rb_time_cmpxchg() is because
checking all three fields is more robust to handle partial failures of
rb_time_cmpxchg() when interrupted by nested rb_time_set().

Link: https://lore.kernel.org/lkml/20231211201324.652870-1-mathieu.desnoyers@efficios.com/
Link: https://lore.kernel.org/linux-trace-kernel/20231212193049.680122-1-mathieu.desnoyers@efficios.com

Fixes: f458a145 ("ring-buffer: Test last update in 32bit version of __rb_time_read()")
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Mathieu Desnoyers pointed out an issue in the rb_time_cmpxchg() for 32 bit
architectures. That is:

 static bool rb_time_cmpxchg(rb_time_t *t, u64 expect, u64 set)
 {
	unsigned long cnt, top, bottom, msb;
	unsigned long cnt2, top2, bottom2, msb2;
	u64 val;

	/* The cmpxchg always fails if it interrupted an update */
	 if (!__rb_time_read(t, &val, &cnt2))
		 return false;

	 if (val != expect)
		 return false;

<<<< interrupted here!

	 cnt = local_read(&t->cnt);

The problem is that the synchronization counter in the rb_time_t is read
*after* the value of the timestamp is read. That means if an interrupt
were to come in between the value being read and the counter being read,
it can change the value and the counter and the interrupted process would
be clueless about it!

The counter needs to be read first and then the value. That way it is easy
to tell if the value is stale or not. If the counter hasn't been updated,
then the value is still good.

Link: https://lore.kernel.org/linux-trace-kernel/20231211201324.652870-1-mathieu.desnoyers@efficios.com/
Link: https://lore.kernel.org/linux-trace-kernel/20231212115301.7a9c9a64@gandalf.local.home

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Fixes: 10464b4a ("ring-buffer: Add rb_time_t 64 bit operations for speeding up 32 bit")
Reported-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Reviewed-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

When filtering is enabled, a temporary buffer is created to place the
content of the trace event output so that the filter logic can decide
from the trace event output if the trace event should be filtered out or
not. If it is to be filtered out, the content in the temporary buffer is
simply discarded, otherwise it is written into the trace buffer.

But if an interrupt were to come in while a previous event was using that
temporary buffer, the event written by the interrupt would actually go
into the ring buffer itself to prevent corrupting the data on the
temporary buffer. If the event is to be filtered out, the event in the
ring buffer is discarded, or if it fails to discard because another event
were to have already come in, it is turned into padding.

The update to the write_stamp in the rb_try_to_discard() happens after a
fix was made to force the next event after the discard to use an absolute
timestamp by setting the before_stamp to zero so it does not match the
write_stamp (which causes an event to use the absolute timestamp).

But there's an effort in rb_try_to_discard() to put back the write_stamp
to what it was before the event was added. But this is useless and
wasteful because nothing is going to be using that write_stamp for
calculations as it still will not match the before_stamp.

Remove this useless update, and in doing so, we remove another
cmpxchg64()!

Also update the comments to reflect this change as well as remove some
extra white space in another comment.

Link: https://lore.kernel.org/linux-trace-kernel/20231215081810.1f4f38fe@rorschach.local.home

Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Vincent Donnefort   <vdonnefort@google.com>
Fixes: b2dd7975 ("ring-buffer: Force absolute timestamp on discard of event")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

If an update to an event is interrupted by another event between the time
the initial event allocated its buffer and where it wrote to the
write_stamp, the code try to reset the write stamp back to the what it had
just overwritten. It knows that it was overwritten via checking the
before_stamp, and if it didn't match what it wrote to the before_stamp
before it allocated its space, it knows it was overwritten.

To put back the write_stamp, it uses the before_stamp it read. The problem
here is that by writing the before_stamp to the write_stamp it makes the
two equal again, which means that the write_stamp can be considered valid
as the last timestamp written to the ring buffer. But this is not
necessarily true. The event that interrupted the event could have been
interrupted in a way that it was interrupted as well, and can end up
leaving with an invalid write_stamp. But if this happens and returns to
this context that uses the before_stamp to update the write_stamp again,
it can possibly incorrectly make it valid, causing later events to have in
correct time stamps.

As it is OK to leave this function with an invalid write_stamp (one that
doesn't match the before_stamp), there's no reason to try to make it valid
again in this case. If this race happens, then just leave with the invalid
write_stamp and the next event to come along will just add a absolute
timestamp and validate everything again.

Bonus points: This gets rid of another cmpxchg64!

Link: https://lore.kernel.org/linux-trace-kernel/20231214222921.193037a7@gandalf.local.home

Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Vincent Donnefort <vdonnefort@google.com>
Fixes: a389d86f ("ring-buffer: Have nested events still record running time stamp")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Fix the extraction of num_csrows and num_chans. The extraction of the
num_rows is wrong. Instead of extracting using the FIELD_GET it is
calling FIELD_PREP.

The issue was masked as the default design has the rows as 0.

Fixes: 6f15b178 ("EDAC/versal: Add a Xilinx Versal memory controller driver")
Closes: https://lore.kernel.org/all/60ca157e-6eff-d12c-9dc0-8aeab125edda@linux-m68k.org/Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20231215053352.8740-1-shubhrajyoti.datta@amd.com

When lockdep is enabled, the for_each_sibling_event(sibling, event)
macro checks that event->ctx->mutex is held. When creating a new group
leader event, we call perf_event_validate_size() on a partially
initialized event where event->ctx is NULL, and so when
for_each_sibling_event() attempts to check event->ctx->mutex, we get a
splat, as reported by Lucas De Marchi:

  WARNING: CPU: 8 PID: 1471 at kernel/events/core.c:1950 __do_sys_perf_event_open+0xf37/0x1080

This only happens for a new event which is its own group_leader, and in
this case there cannot be any sibling events. Thus it's safe to skip the
check for siblings, which avoids having to make invasive and ugly
changes to for_each_sibling_event().

Avoid the splat by bailing out early when the new event is its own
group_leader.

Fixes: 382c27f4 ("perf: Fix perf_event_validate_size()")
Closes: https://lore.kernel.org/lkml/20231214000620.3081018-1-lucas.demarchi@intel.com/
Closes: https://lore.kernel.org/lkml/ZXpm6gQ%2Fd59jGsuW@xpf.sh.intel.com/Reported-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20231215112450.3972309-1-mark.rutland@arm.com

The following kmemleaks were detected when removing the cxl module
stack:

unreferenced object 0xffff88822616b800 (size 1024):
...
  backtrace:
    [<00000000bedc6f83>] kmalloc_trace+0x26/0x90
    [<00000000448d1afc>] devm_cxl_pmu_add+0x3a/0x110 [cxl_core]
    [<00000000ca3bfe16>] 0xffffffffa105213b
    [<00000000ba7f78dc>] local_pci_probe+0x41/0x90
    [<000000005bb027ac>] pci_device_probe+0xb0/0x1c0
...
unreferenced object 0xffff8882260abcc0 (size 16):
...
  hex dump (first 16 bytes):
    70 6d 75 5f 6d 65 6d 30 2e 30 00 26 82 88 ff ff  pmu_mem0.0.&....
  backtrace:
...
    [<00000000152b5e98>] dev_set_name+0x43/0x50
    [<00000000c228798b>] devm_cxl_pmu_add+0x102/0x110 [cxl_core]
    [<00000000ca3bfe16>] 0xffffffffa105213b
    [<00000000ba7f78dc>] local_pci_probe+0x41/0x90
    [<000000005bb027ac>] pci_device_probe+0xb0/0x1c0
...
unreferenced object 0xffff8882272af200 (size 256):
...
  backtrace:
    [<00000000bedc6f83>] kmalloc_trace+0x26/0x90
    [<00000000a14d1813>] device_add+0x4ea/0x890
    [<00000000a3f07b47>] devm_cxl_pmu_add+0xbe/0x110 [cxl_core]
    [<00000000ca3bfe16>] 0xffffffffa105213b
    [<00000000ba7f78dc>] local_pci_probe+0x41/0x90
    [<000000005bb027ac>] pci_device_probe+0xb0/0x1c0
...

devm_cxl_pmu_add() correctly registers a device remove function but it
only calls device_del() which is only part of device unregistration.

Properly call device_unregister() to free up the memory associated with
the device.

Fixes: 1ad3f701 ("cxl/pci: Find and register CXL PMU devices")
Cc: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20231016-pmu-unregister-fix-v1-1-1e2eb2fa3c69@intel.comSigned-off-by: Dan Williams <dan.j.williams@intel.com>

Turns out we made a silly mistake when coming up with OR inheritance on
nouveau. On pre-DCB 4.1, iors are statically routed to output paths via the
DCB. On later generations iors are only routed to an output path if they're
actually being used. Unfortunately, it appears with NVIF_OUTP_INHERIT_V0 we
make the mistake of assuming the later is true on all generations, which is
currently leading us to return bogus ior -> head assignments through nvif,
which causes WARN_ON().

So - fix this by verifying that we actually know that there's a head
assigned to an ior before allowing it to be inherited through nvif. This
-should- hopefully fix the WARN_ON on GT218 reported by Borislav.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Reported-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231214004359.1028109-1-lyude@redhat.com

Commit 12c9b05d ("drm/nouveau/imem: support allocations not
preserved across suspend") uses container_of() to cast from struct
nvkm_memory to struct nvkm_instobj, assuming that all instance objects
are derived from struct nvkm_instobj. For the gk20a family that's not
the case and they are derived from struct nvkm_memory instead. This
causes some subtle data corruption (nvkm_instobj.preserve ends up
mapping to gk20a_instobj.vaddr) that causes a NULL pointer dereference
in gk20a_instobj_acquire_iommu() (and possibly elsewhere) and also
prevents suspend/resume from working.

Fix this by making struct gk20a_instobj derive from struct nvkm_instobj
instead.

Fixes: 12c9b05d ("drm/nouveau/imem: support allocations not preserved across suspend")
Reported-by: Jonathan Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Tested-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20231208104653.1917055-1-thierry.reding@gmail.com

Pull smb client fixes from Steve French:
 "Address OOBs and NULL dereference found by Dr. Morris's recent
  analysis and fuzzing.

  All marked for stable as well"

* tag '6.7-rc5-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  smb: client: fix OOB in smb2_query_reparse_point()
  smb: client: fix NULL deref in asn1_ber_decoder()
  smb: client: fix potential OOBs in smb2_parse_contexts()
  smb: client: fix OOB in receive_encrypted_standard()