- 30 Sep, 2015 33 commits
-
-
Jialing Fu authored
commit 71f8a4b8 upstream. The following panic is captured in ker3.14, but the issue still exists in latest kernel. --------------------------------------------------------------------- [ 20.738217] c0 3136 (Compiler) Unable to handle kernel NULL pointer dereference at virtual address 00000578 ...... [ 20.738499] c0 3136 (Compiler) PC is at _raw_spin_lock_irqsave+0x24/0x60 [ 20.738527] c0 3136 (Compiler) LR is at _raw_spin_lock_irqsave+0x20/0x60 [ 20.740134] c0 3136 (Compiler) Call trace: [ 20.740165] c0 3136 (Compiler) [<ffffffc0008ee900>] _raw_spin_lock_irqsave+0x24/0x60 [ 20.740200] c0 3136 (Compiler) [<ffffffc0000dd024>] __wake_up+0x1c/0x54 [ 20.740230] c0 3136 (Compiler) [<ffffffc000639414>] mmc_wait_data_done+0x28/0x34 [ 20.740262] c0 3136 (Compiler) [<ffffffc0006391a0>] mmc_request_done+0xa4/0x220 [ 20.740314] c0 3136 (Compiler) [<ffffffc000656894>] sdhci_tasklet_finish+0xac/0x264 [ 20.740352] c0 3136 (Compiler) [<ffffffc0000a2b58>] tasklet_action+0xa0/0x158 [ 20.740382] c0 3136 (Compiler) [<ffffffc0000a2078>] __do_softirq+0x10c/0x2e4 [ 20.740411] c0 3136 (Compiler) [<ffffffc0000a24bc>] irq_exit+0x8c/0xc0 [ 20.740439] c0 3136 (Compiler) [<ffffffc00008489c>] handle_IRQ+0x48/0xac [ 20.740469] c0 3136 (Compiler) [<ffffffc000081428>] gic_handle_irq+0x38/0x7c ---------------------------------------------------------------------- Because in SMP, "mrq" has race condition between below two paths: path1: CPU0: <tasklet context> static void mmc_wait_data_done(struct mmc_request *mrq) { mrq->host->context_info.is_done_rcv = true; // // If CPU0 has just finished "is_done_rcv = true" in path1, and at // this moment, IRQ or ICache line missing happens in CPU0. // What happens in CPU1 (path2)? // // If the mmcqd thread in CPU1(path2) hasn't entered to sleep mode: // path2 would have chance to break from wait_event_interruptible // in mmc_wait_for_data_req_done and continue to run for next // mmc_request (mmc_blk_rw_rq_prep). // // Within mmc_blk_rq_prep, mrq is cleared to 0. // If below line still gets host from "mrq" as the result of // compiler, the panic happens as we traced. wake_up_interruptible(&mrq->host->context_info.wait); } path2: CPU1: <The mmcqd thread runs mmc_queue_thread> static int mmc_wait_for_data_req_done(... { ... while (1) { wait_event_interruptible(context_info->wait, (context_info->is_done_rcv || context_info->is_new_req)); static void mmc_blk_rw_rq_prep(... { ... memset(brq, 0, sizeof(struct mmc_blk_request)); This issue happens very coincidentally; however adding mdelay(1) in mmc_wait_data_done as below could duplicate it easily. static void mmc_wait_data_done(struct mmc_request *mrq) { mrq->host->context_info.is_done_rcv = true; + mdelay(1); wake_up_interruptible(&mrq->host->context_info.wait); } At runtime, IRQ or ICache line missing may just happen at the same place of the mdelay(1). This patch gets the mmc_context_info at the beginning of function, it can avoid this race condition. Signed-off-by:
Jialing Fu <jlfu@marvell.com> Tested-by:
Shawn Lin <shawn.lin@rock-chips.com> Fixes: 2220eedf ("mmc: fix async request mechanism ....") Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Luis Henriques <luis.henriques@canonical.com>
-
Yishai Hadas authored
commit 35d4a0b6 upstream. Fixes: 2a72f212 ("IB/uverbs: Remove dev_table") Before this commit there was a device look-up table that was protected by a spin_lock used by ib_uverbs_open and by ib_uverbs_remove_one. When it was dropped and container_of was used instead, it enabled the race with remove_one as dev might be freed just after: dev = container_of(inode->i_cdev, struct ib_uverbs_device, cdev) but before the kref_get. In addition, this buggy patch added some dead code as container_of(x,y,z) can never be NULL and so dev can never be NULL. As a result the comment above ib_uverbs_open saying "the open method will either immediately run -ENXIO" is wrong as it can never happen. The solution follows Jason Gunthorpe suggestion from below URL: https://www.mail-archive.com/linux-rdma@vger.kernel.org/msg25692.html cdev will hold a kref on the parent (the containing structure, ib_uverbs_device) and only when that kref is released it is guaranteed that open will never be called again. In addition, fixes the active count scheme to use an atomic not a kref to prevent WARN_ON as pointed by above comment from Jason. Signed-off-by:
Yishai Hadas <yishaih@mellanox.com> Signed-off-by:
Shachar Raindel <raindel@mellanox.com> Reviewed-by:
Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Noa Osherovich authored
commit 5e99b139 upstream. The mlx4 IB driver implementation for ib_query_ah used a wrong offset (28 instead of 29) when link type is Ethernet. Fixed to use the correct one. Fixes: fa417f7b ('IB/mlx4: Add support for IBoE') Signed-off-by:
Shani Michaeli <shanim@mellanox.com> Signed-off-by:
Noa Osherovich <noaos@mellanox.com> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
-
Jack Morgenstein authored
commit 2b135db3 upstream. The pkey mapping for RoCE must remain the default mapping: VFs: virtual index 0 = mapped to real index 0 (0xFFFF) All others indices: mapped to a real pkey index containing an invalid pkey. PF: virtual index i = real index i. Don't allow users to change these mappings using files found in sysfs. Fixes: c1e7e466 ('IB/mlx4: Add iov directory in sysfs under the ib device') Signed-off-by:
Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by:
-
Jack Morgenstein authored
commit 90c1d8b6 upstream. send_mad_to_wire takes the same spinlock that is taken in the interrupt context. Therefore, it needs irqsave/restore. Fixes: b9c5d6a6 ('IB/mlx4: Add multicast group (MCG) paravirtualization for SR-IOV') Signed-off-by:
-
Axel Lin authored
commit 2c3f4b97 upstream. All the callers assume devm_spear_pcm_platform_register is a devm_ API, so use devm_snd_dmaengine_pcm_register in devm_spear_pcm_platform_register. Fixes: e1771bcf ("ASoC: SPEAr: remove custom DMA alloc compat function") Signed-off-by:
Axel Lin <axel.lin@ingics.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Kan Liang authored
commit 601083cf upstream. print_aggr() fails to print per-core/per-socket statistics after commit 582ec082 ("perf stat: Fix per-socket output bug for uncore events") if events have differnt cpus. Because in print_aggr(), aggr_get_id needs index (not cpu id) to find core/pkg id. Also, evsel cpu maps should be used to get aggregated id. Here is an example: Counting events cycles,uncore_imc_0/cas_count_read/. (Uncore event has cpumask 0,18) $ perf stat -e cycles,uncore_imc_0/cas_count_read/ -C0,18 --per-core sleep 2 Without this patch, it failes to get CPU 18 result. Performance counter stats for 'CPU(s) 0,18': S0-C0 1 7526851 cycles S0-C0 1 1.05 MiB uncore_imc_0/cas_count_read/ S1-C0 0 <not counted> cycles S1-C0 0 <not counted> MiB uncore_imc_0/cas_count_read/ With this patch, it can get both CPU0 and CPU18 result. Performance counter stats for 'CPU(s) 0,18': S0-C0 1 6327768 cycles S0-C0 1 0.47 MiB uncore_imc_0/cas_count_read/ S1-C0 1 330228 cycles S1-C0 1 0.29 MiB uncore_imc_0/cas_count_read/ Signed-off-by:
Kan Liang <kan.liang@intel.com> Acked-by:
Jiri Olsa <jolsa@kernel.org> Acked-by:
Stephane Eranian <eranian@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Fixes: 582ec082 ("perf stat: Fix per-socket output bug for uncore events") Link: http://lkml.kernel.org/r/1435820925-51091-1-git-send-email-kan.liang@intel.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Jisheng Zhang authored
commit 0dafa60e upstream. commit bb8175a8 ("mmc: sdhci: clarify DDR timing mode between SD-UHS and eMMC") added MMC_DDR52 as eMMC's DDR mode to be distinguished from SD-UHS, but it missed setting driver type for MMC_DDR52 timing mode. So sometimes we get the following error on Marvell BG2Q DMP board: [ 1.559598] mmcblk0: error -84 transferring data, sector 0, nr 8, cmd response 0x900, card status 0xb00 [ 1.569314] mmcblk0: retrying using single block read [ 1.575676] mmcblk0: error -84 transferring data, sector 2, nr 6, cmd response 0x900, card status 0x0 [ 1.585202] blk_update_request: I/O error, dev mmcblk0, sector 2 [ 1.591818] mmcblk0: error -84 transferring data, sector 3, nr 5, cmd response 0x900, card status 0x0 [ 1.601341] blk_update_request: I/O error, dev mmcblk0, sector 3 This patches fixes this by adding the missing driver type setting. Fixes: bb8175a8 ("mmc: sdhci: clarify DDR timing mode ...") Signed-off-by:
Jisheng Zhang <jszhang@marvell.com> Signed-off-by:
-
Michal Kazior authored
commit 5e55e3cb upstream. The function returns 1 when DMA mapping fails. The driver would return bogus values and could possibly confuse itself if DMA failed. Fixes: 767d34fc ("ath10k: remove DMA mapping wrappers") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Michal Kazior <michal.kazior@tieto.com> Signed-off-by:
Kalle Valo <kvalo@qca.qualcomm.com> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Antoine Ténart authored
commit bc3e00f0 upstream. When keeping the configuration set by the bootloader (by using the marvell,nand-keep-config property), the pxa3xx_nand_detect_config() function is called and set the chunk size to 512 as a default value if NDCR_PAGE_SZ is not set. In the other case, when not keeping the bootloader configuration, no chunk size is set. Fix this by adding a default chunk size of 512. Fixes: 70ed8523 ("mtd: nand: pxa3xx: Introduce multiple page I/O support") Signed-off-by:
Antoine Tenart <antoine.tenart@free-electrons.com> Acked-by:
Robert Jarzmik <robert.jarzmik@free> Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
-
Michael Ellerman authored
commit 74b5037b upstream. The powerpc kernel can be built to have either a 4K PAGE_SIZE or a 64K PAGE_SIZE. However when built with a 4K PAGE_SIZE there is an additional config option which can be enabled, PPC_HAS_HASH_64K, which means the kernel also knows how to hash a 64K page even though the base PAGE_SIZE is 4K. This is used in one obscure configuration, to support 64K pages for SPU local store on the Cell processor when the rest of the kernel is using 4K pages. In this configuration, pte_pagesize_index() is defined to just pass through its arguments to get_slice_psize(). However pte_pagesize_index() is called for both user and kernel addresses, whereas get_slice_psize() only knows how to handle user addresses. This has been broken forever, however until recently it happened to work. That was because in get_slice_psize() the large kernel address would cause the right shift of the slice mask to return zero. However in commit 7aa0727f ("powerpc/mm: Increase the slice range to 64TB"), the get_slice_psize() code was changed so that instead of a right shift we do an array lookup based on the address. When passed a kernel address this means we index way off the end of the slice array and return random junk. That is only fatal if we happen to hit something non-zero, but when we do return a non-zero value we confuse the MMU code and eventually cause a check stop. This fix is ugly, but simple. When we're called for a kernel address we return 4K, which is always correct in this configuration, otherwise we use the slice mask. Fixes: 7aa0727f ("powerpc/mm: Increase the slice range to 64TB") Reported-by:
Cyril Bur <cyrilbur@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Reviewed-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
-
Jesse Brandeburg authored
commit fbaff3ef upstream. Sparse builds have been warning for a really long time now that etherdevice.h has a conversion that is unsafe. include/linux/etherdevice.h:79:32: warning: restricted __be16 degrades to integer This code change fixes the issue and generates the exact same assembly before/after (checked on x86_64) Fixes: 2c722fe1 (etherdevice: Optimize a few is_<foo>_ether_addr functions) Signed-off-by:
Jesse Brandeburg <jesse.brandeburg@intel.com> CC: Joe Perches <joe@perches.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Linus Lüssing authored
commit 53cf037b upstream. The two commits noted below added calls to ip_hdr() and ipv6_hdr(). They need a correctly set skb network header. Unfortunately we cannot rely on the device drivers to set it for us. Therefore setting it in the beginning of the according ndo_start_xmit handler. Fixes: 1d8ab8d3 ("batman-adv: Modified forwarding behaviour for multicast packets") Fixes: ab49886e ("batman-adv: Add IPv4 link-local/IPv6-ll-all-nodes multicast support") Signed-off-by:
Linus Lüssing <linus.luessing@c0d3.blue> Signed-off-by:
Marek Lindner <mareklindner@neomailbox.ch> Signed-off-by:
Antonio Quartulli <antonio@meshcoding.com> Signed-off-by:
-
Linus Lüssing authored
commit 8a4023c5 upstream. So far the mcast tvlv handler did not anticipate the processing of multiple incoming OGMs from the same originator at the same time. This can lead to various issues: * Broken refcounting: For instance two mcast handlers might both assume that an originator just got multicast capabilities and will together wrongly decrease mcast.num_disabled by two, potentially leading to an integer underflow. * Potential kernel panic on hlist_del_rcu(): Two mcast handlers might one after another try to do an hlist_del_rcu(&orig->mcast_want_all_*_node). The second one will cause memory corruption / crashes. (Reported by: Sven Eckelmann <sven@narfation.org>) Right in the beginning the code path makes assumptions about the current multicast related state of an originator and bases all updates on that. The easiest and least error prune way to fix the issues in this case is to serialize multiple mcast handler invocations with a spinlock. Fixes: 60432d75 ("batman-adv: Announce new capability via multicast TVLV") Signed-off-by:
-
Linus Lüssing authored
commit 9c936e3f upstream. Bitwise OR/AND assignments in C aren't guaranteed to be atomic. One OGM handler might undo the set/clear of a specific bit from another handler run in between. Fix this by using the atomic set_bit()/clear_bit()/test_bit() functions. Fixes: 60432d75 ("batman-adv: Announce new capability via multicast TVLV") Signed-off-by:
-
Linus Lüssing authored
commit e8829f00 upstream. A miscounting of nodes having multicast optimizations enabled can lead to multicast packet loss in the following scenario: If the first OGM a node receives from another one has no multicast optimizations support (no multicast tvlv) then we are missing to increase the counter. This potentially leads to the wrong assumption that we could safely use multicast optimizations. Fixings this by increasing the counter if the initial OGM has the multicast TVLV unset, too. Introduced by 60432d75 ("batman-adv: Announce new capability via multicast TVLV") Reported-by:
Tobias Hachmer <tobias@hachmer.de> Signed-off-by:
-
Linus Lüssing authored
commit a5164886 upstream. When purging an orig_node we should only decrease counter tracking the number of nodes without multicast optimizations support if it was increased through this orig_node before. A not yet quite initialized orig_node (meaning it did not have its turn in the mcast-tvlv handler so far) which gets purged would not adhere to this and will lead to a counter imbalance. Fixing this by adding a check whether the orig_node is mcast-initalized before decreasing the counter in the mcast-orig_node-purging routine. Introduced by 60432d75 ("batman-adv: Announce new capability via multicast TVLV") Reported-by:
-
Linus Lüssing authored
commit ac4eebd4 upstream. Bitwise OR/AND assignments in C aren't guaranteed to be atomic. One OGM handler might undo the set/clear of a specific bit from another handler run in between. Fix this by using the atomic set_bit()/clear_bit()/test_bit() functions. Fixes: e17931d1 ("batman-adv: introduce capability initialization bitfield") Signed-off-by:
-
Linus Lüssing authored
commit 4635469f upstream. Bitwise OR/AND assignments in C aren't guaranteed to be atomic. One OGM handler might undo the set/clear of a specific bit from another handler run in between. Fix this by using the atomic set_bit()/clear_bit()/test_bit() functions. Fixes: 3f4841ff ("batman-adv: tvlv - add network coding container") Signed-off-by:
-
Linus Lüssing authored
commit 65d7d460 upstream. Bitwise OR/AND assignments in C aren't guaranteed to be atomic. One OGM handler might undo the set/clear of a specific bit from another handler run in between. Fix this by using the atomic set_bit()/clear_bit()/test_bit() functions. Fixes: 17cf0ea4 ("batman-adv: tvlv - add distributed arp table container") Signed-off-by:
-
Arnaldo Carvalho de Melo authored
commit e8e6d37e upstream. When we introduce a new sort key, we need to update the hists__calc_col_len() function accordingly, otherwise the width will be limited to strlen(header). We can't update it when obtaining a line value for a column (for instance, in sort__srcline_cmp()), because we reset it all when doing a resort (see hists__output_recalc_col_len()), so we need to, from what is in the hist_entry fields, set each of the column widths. Cc: Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@kernel.org> Fixes: 409a8be6 ("perf tools: Add sort by src line/number") Link: http://lkml.kernel.org/n/tip-jgbe0yx8v1gs89cslr93pvz2@git.kernel.orgSigned-off-by:
-
Paul Bolle authored
commit fe2b5921 upstream. wf_unregister_client() increments the client count when a client unregisters. That is obviously incorrect. Decrement that client count instead. Fixes: 75722d39 ("[PATCH] ppc64: Thermal control for SMU based machines") Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
-
Dan Carpenter authored
commit 5feb5d20 upstream. There is an "&&" vs "||" typo here so this loops 3000 times or if we get unlucky it could loop forever. Fixes: ceaa0a6e ('usb: gadget: m66592-udc: add support for TEST_MODE') Signed-off-by:
Felipe Balbi <balbi@ti.com> [ luis: backported to 3.16: - file rename: drivers/usb/gadget/udc/m66592-udc.c -> drivers/usb/gadget/m66592-udc.c ] Signed-off-by:
-
Dan Carpenter authored
commit 3294bee8 upstream. The ">" should be ">=" or we end up reading beyond the end of the array. Fixes: 6e973d2c ('clk: vexpress: Add separate SP810 driver') Signed-off-by:
Pawel Moll <pawel.moll@arm.com> Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Thomas Huth authored
commit 1c2cb594 upstream. The EPOW interrupt handler uses rtas_get_sensor(), which in turn uses rtas_busy_delay() to wait for RTAS becoming ready in case it is necessary. But rtas_busy_delay() is annotated with might_sleep() and thus may not be used by interrupts handlers like the EPOW handler! This leads to the following BUG when CONFIG_DEBUG_ATOMIC_SLEEP is enabled: BUG: sleeping function called from invalid context at arch/powerpc/kernel/rtas.c:496 in_atomic(): 1, irqs_disabled(): 1, pid: 0, name: swapper/1 CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.2.0-rc2-thuth #6 Call Trace: [c00000007ffe7b90] [c000000000807670] dump_stack+0xa0/0xdc (unreliable) [c00000007ffe7bc0] [c0000000000e1f14] ___might_sleep+0x134/0x180 [c00000007ffe7c20] [c00000000002aec0] rtas_busy_delay+0x30/0xd0 [c00000007ffe7c50] [c00000000002bde4] rtas_get_sensor+0x74/0xe0 [c00000007ffe7ce0] [c000000000083264] ras_epow_interrupt+0x44/0x450 [c00000007ffe7d90] [c000000000120260] handle_irq_event_percpu+0xa0/0x300 [c00000007ffe7e70] [c000000000120524] handle_irq_event+0x64/0xc0 [c00000007ffe7eb0] [c000000000124dbc] handle_fasteoi_irq+0xec/0x260 [c00000007ffe7ef0] [c00000000011f4f0] generic_handle_irq+0x50/0x80 [c00000007ffe7f20] [c000000000010f3c] __do_irq+0x8c/0x200 [c00000007ffe7f90] [c0000000000236cc] call_do_irq+0x14/0x24 [c00000007e6f39e0] [c000000000011144] do_IRQ+0x94/0x110 [c00000007e6f3a30] [c000000000002594] hardware_interrupt_common+0x114/0x180 Fix this issue by introducing a new rtas_get_sensor_fast() function that does not use rtas_busy_delay() - and thus can only be used for sensors that do not cause a BUSY condition - known as "fast" sensors. The EPOW sensor is defined to be "fast" in sPAPR - mpe. Fixes: 587f83e8 ("powerpc/pseries: Use rtas_get_sensor in RAS code") Signed-off-by:
Thomas Huth <thuth@redhat.com> Reviewed-by:
Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by:
-
Florian Fainelli authored
commit 978ffac4 upstream. bcmgenet_open()'s error path call free_irq() with a dev_id argument different from the one we used to call request_irq() with, this will make us trip over the warning in kernel/irq/manage.c:__free_irq() Fixes: 1c1008c7 ("net: bcmgenet: add main driver file") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Minfei Huang authored
commit 9962eea9 upstream. The variable pmd_idx is not initialized for the first iteration of the for loop. Assign the proper value which indexes the start address. Fixes: 719272c4 'x86, mm: only call early_ioremap_page_table_range_init() once' Signed-off-by:
Minfei Huang <mnfhuang@gmail.com> Cc: tony.luck@intel.com Cc: wangnan0@huawei.com Cc: david.vrabel@citrix.com Reviewed-by: yinghai@kernel.org Link: http://lkml.kernel.org/r/1436703522-29552-1-git-send-email-mhuang@redhat.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Chuck Lever authored
commit 9d11b51c upstream. The Linux NFS server returns garbage in the data payload of inline NFS/RDMA READ replies. These are READs of under 1000 bytes or so where the client has not provided either a reply chunk or a write list. The NFS server delivers the data payload for an NFS READ reply to the transport in an xdr_buf page list. If the NFS client did not provide a reply chunk or a write list, send_reply() is supposed to set up a separate sge for the page containing the READ data, and another sge for XDR padding if needed, then post all of the sges via a single SEND Work Request. The problem is send_reply() does not advance through the xdr_buf when setting up scatter/gather entries for SEND WR. It always calls dma_map_xdr with xdr_off set to zero. When there's more than one sge, dma_map_xdr() sets up the SEND sge's so they all point to the xdr_buf's head. The current Linux NFS/RDMA client always provides a reply chunk or a write list when performing an NFS READ over RDMA. Therefore, it does not exercise this particular case. The Linux server has never had to use more than one extra sge for building RPC/RDMA replies with a Linux client. However, an NFS/RDMA client _is_ allowed to send small NFS READs without setting up a write list or reply chunk. The NFS READ reply fits entirely within the inline reply buffer in this case. This is perhaps a more efficient way of performing NFS READs that the Linux NFS/RDMA client may some day adopt. Fixes: b432e6b3 ('svcrdma: Change DMA mapping logic to . . .') BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=285Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> [ luis: backported to 3.16: adjusted context ] Signed-off-by:
-
Ulf Hansson authored
commit cee3d8cc upstream. The legacy system PM support has long time ago been dropped from the AMBA bus. Align to that by converting to the modern system PM callbacks. Fixes: 26825cfd (ARM: 7914/1: amba: Drop legacy PM support ...) Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Bjorn Helgaas authored
commit d1541dc9 upstream. In fixup_ti816x_class(), we assigned "class = PCI_CLASS_MULTIMEDIA_VIDEO". But PCI_CLASS_MULTIMEDIA_VIDEO is only the two-byte base class/sub-class and needs to be shifted to make space for the low-order interface byte. Shift PCI_CLASS_MULTIMEDIA_VIDEO to set the correct class code. Fixes: 63c44080 ("PCI: Add quirk for setting valid class for TI816X Endpoint") Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> CC: Hemant Pedanekar <hemantp@ti.com> Signed-off-by:
-
Jonathon Jongsma authored
commit bd3e1c7c upstream. Due to some recent changes in drm_helper_probe_single_connector_modes_merge_bits(), old custom modes were not being pruned properly. In current kernels, drm_mode_validate_basic() is called to sanity-check each mode in the list. If the sanity-check passes, the mode's status gets set to to MODE_OK. In older kernels this check was not done, so old custom modes would still have a status of MODE_UNVERIFIED at this point, and would therefore be pruned later in the function. As a result of this new behavior, the list of modes for a device always includes every custom mode ever configured for the device, with the largest one listed first. Since desktop environments usually choose the first preferred mode when a hotplug event is emitted, this had the result of making it very difficult for the user to reduce the size of the display. The qxl driver did implement the mode_valid connector function, but it was empty. In order to restore the old behavior where old custom modes are pruned, we implement a proper mode_valid function for the qxl driver. This function now checks each mode against the last configured custom mode and the list of standard modes. If the mode doesn't match any of these, its status is set to MODE_BAD so that it will be pruned as expected. Signed-off-by:
Jonathon Jongsma <jjongsma@redhat.com> Signed-off-by:
Dave Airlie <airlied@redhat.com> Signed-off-by:
-
Hin-Tak Leung authored
commit b4cc0efe upstream. Fix B-tree corruption when a new record is inserted at position 0 in the node in hfs_brec_insert(). This is an identical change to the corresponding hfs b-tree code to Sergei Antonov's "hfsplus: fix B-tree corruption after insertion at position 0", to keep similar code paths in the hfs and hfsplus drivers in sync, where appropriate. Signed-off-by:
Hin-Tak Leung <htl10@users.sourceforge.net> Cc: Sergei Antonov <saproj@gmail.com> Cc: Joe Perches <joe@perches.com> Reviewed-by:
Vyacheslav Dubeyko <slava@dubeyko.com> Cc: Anton Altaparmakov <anton@tuxera.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Hin-Tak Leung authored
commit 7cb74be6 upstream. Pages looked up by __hfs_bnode_create() (called by hfs_bnode_create() and hfs_bnode_find() for finding or creating pages corresponding to an inode) are immediately kmap()'ed and used (both read and write) and kunmap()'ed, and should not be page_cache_release()'ed until hfs_bnode_free(). This patch fixes a problem I first saw in July 2012: merely running "du" on a large hfsplus-mounted directory a few times on a reasonably loaded system would get the hfsplus driver all confused and complaining about B-tree inconsistencies, and generates a "BUG: Bad page state". Most recently, I can generate this problem on up-to-date Fedora 22 with shipped kernel 4.0.5, by running "du /" (="/" + "/home" + "/mnt" + other smaller mounts) and "du /mnt" simultaneously on two windows, where /mnt is a lightly-used QEMU VM image of the full Mac OS X 10.9: $ df -i / /home /mnt Filesystem Inodes IUsed IFree IUse% Mounted on /dev/mapper/fedora-root 3276800 551665 2725135 17% / /dev/mapper/fedora-home 52879360 716221 52163139 2% /home /dev/nbd0p2 4294967295 1387818 4293579477 1% /mnt After applying the patch, I was able to run "du /" (60+ times) and "du /mnt" (150+ times) continuously and simultaneously for 6+ hours. There are many reports of the hfsplus driver getting confused under load and generating "BUG: Bad page state" or other similar issues over the years. [1] The unpatched code [2] has always been wrong since it entered the kernel tree. The only reason why it gets away with it is that the kmap/memcpy/kunmap follow very quickly after the page_cache_release() so the kernel has not had a chance to reuse the memory for something else, most of the time. The current RW driver appears to have followed the design and development of the earlier read-only hfsplus driver [3], where-by version 0.1 (Dec 2001) had a B-tree node-centric approach to read_cache_page()/page_cache_release() per bnode_get()/bnode_put(), migrating towards version 0.2 (June 2002) of caching and releasing pages per inode extents. When the current RW code first entered the kernel [2] in 2005, there was an REF_PAGES conditional (and "//" commented out code) to switch between B-node centric paging to inode-centric paging. There was a mistake with the direction of one of the REF_PAGES conditionals in __hfs_bnode_create(). In a subsequent "remove debug code" commit [4], the read_cache_page()/page_cache_release() per bnode_get()/bnode_put() were removed, but a page_cache_release() was mistakenly left in (propagating the "REF_PAGES <-> !REF_PAGE" mistake), and the commented-out page_cache_release() in bnode_release() (which should be spanned by !REF_PAGES) was never enabled. References: [1]: Michael Fox, Apr 2013 http://www.spinics.net/lists/linux-fsdevel/msg63807.html ("hfsplus volume suddenly inaccessable after 'hfs: recoff %d too large'") Sasha Levin, Feb 2015 http://lkml.org/lkml/2015/2/20/85 ("use after free") https://bugs.launchpad.net/ubuntu/+source/linux/+bug/740814 https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1027887 https://bugzilla.kernel.org/show_bug.cgi?id=42342 https://bugzilla.kernel.org/show_bug.cgi?id=63841 https://bugzilla.kernel.org/show_bug.cgi?id=78761 [2]: http://git.kernel.org/cgit/linux/kernel/git/tglx/history.git/commit/\ fs/hfs/bnode.c?id=d1081202 commit d1081202 Author: Andrew Morton <akpm@osdl.org> Date: Wed Feb 25 16:17:36 2004 -0800 [PATCH] HFS rewrite http://git.kernel.org/cgit/linux/kernel/git/tglx/history.git/commit/\ fs/hfsplus/bnode.c?id=91556682 commit 91556682 Author: Andrew Morton <akpm@osdl.org> Date: Wed Feb 25 16:17:48 2004 -0800 [PATCH] HFS+ support [3]: http://sourceforge.net/projects/linux-hfsplus/ http://sourceforge.net/projects/linux-hfsplus/files/Linux%202.4.x%20patch/hfsplus%200.1/ http://sourceforge.net/projects/linux-hfsplus/files/Linux%202.4.x%20patch/hfsplus%200.2/ http://linux-hfsplus.cvs.sourceforge.net/viewvc/linux-hfsplus/linux/\ fs/hfsplus/bnode.c?r1=1.4&r2=1.5 Date: Thu Jun 6 09:45:14 2002 +0000 Use buffer cache instead of page cache in bnode.c. Cache inode extents. [4]: http://git.kernel.org/cgit/linux/kernel/git/\ stable/linux-stable.git/commit/?id=a5e3985f commit a5e3985f Author: Roman Zippel <zippel@linux-m68k.org> Date: Tue Sep 6 15:18:47 2005 -0700 [PATCH] hfs: remove debug code Signed-off-by:
Sergei Antonov <saproj@gmail.com> Reviewed-by:
Anton Altaparmakov <anton@tuxera.com> Reported-by:
Sasha Levin <sasha.levin@oracle.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Vyacheslav Dubeyko <slava@dubeyko.com> Cc: Sougata Santra <sougata@tuxera.com> Signed-off-by:
-
- 29 Sep, 2015 7 commits
-
-
Chris Wilson authored
commit acd29f7b upstream. In I915_READ64_2x32 we attempt to read a 64bit register using 2 32bit reads. Due to the nature of the registers we try to read in this manner, they may increment between the two instruction (e.g. a timestamp counter). To keep the result accurate, we repeat the read if we detect an overflow (i.e. the upper value varies). However, some hardware is just plain flaky and may endless loop as the the upper 32bits are not stable. Just give up after a couple of tries and report whatever we read last. v2: Use the most recent values when erring out on an unstable register. Reported-by: russianneuromancer@ya.ru Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91906Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Michał Winiarski <michal.winiarski@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Jani Nikula <jani.nikula@linux.intel.com> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
Jaewon Kim authored
commit c54839a7 upstream. reclaim_clean_pages_from_list() assumes that shrink_page_list() returns number of pages removed from the candidate list. But shrink_page_list() puts back mlocked pages without passing it to caller and without counting as nr_reclaimed. This increases nr_isolated. To fix this, this patch changes shrink_page_list() to pass unevictable pages back to caller. Caller will take care those pages. Minchan said: It fixes two issues. 1. With unevictable page, cma_alloc will be successful. Exactly speaking, cma_alloc of current kernel will fail due to unevictable pages. 2. fix leaking of NR_ISOLATED counter of vmstat With it, too_many_isolated works. Otherwise, it could make hang until the process get SIGKILL. Signed-off-by:
Jaewon Kim <jaewon31.kim@samsung.com> Acked-by:
Minchan Kim <minchan@kernel.org> Cc: Mel Gorman <mgorman@techsingularity.net> Acked-by:
Vlastimil Babka <vbabka@suse.cz> Signed-off-by:
-
John David Anglin authored
commit 1b59ddfc upstream. The attached change fixes the condition used in the "sub" instruction. A double word comparison is needed. This fixes the 64-bit LWS CAS operation on 64-bit kernels. I can now enable 64-bit atomic support in GCC. Signed-off-by: John David Anglin <dave.anglin> Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Michal Hocko authored
commit 537b604c upstream. b9d5c6b7 ("[SCSI] cleanup setting task state in scsi_error_handler()") has introduced a race between scsi_error_handler and scsi_host_dev_release resulting in the hang when the device goes away because scsi_error_handler might miss a wake up: CPU0 CPU1 scsi_error_handler scsi_host_dev_release kthread_stop() kthread_should_stop() test_bit(KTHREAD_SHOULD_STOP) set_bit(KTHREAD_SHOULD_STOP) wake_up_process() wait_for_completion() set_current_state(TASK_INTERRUPTIBLE) schedule() The most straightforward solution seems to be to invert the ordering of the set_current_state and kthread_should_stop. The issue has been noticed during reboot test on a 3.0 based kernel but the current code seems to be affected in the same way. [jejb: additional comment added] Reported-and-debugged-by:
Mike Mayer <Mike.Meyer@teradata.com> Signed-off-by:
Michal Hocko <mhocko@suse.com> Reviewed-by:
Dan Williams <dan.j.williams@intel.com> Reviewed-by:
Hannes Reinecke <hare@suse.de> Signed-off-by:
James Bottomley <JBottomley@Odin.com> Signed-off-by:
-
Joonyoung Shim authored
commit ff02c044 upstream. According to datasheet, the S2MPS13X and S2MPS14X should update write buffer via setting WUDR bit to high after ctrl register is written. If not, ALARM interrupt of rtc-s5m doesn't happen first time when i use tools/testing/selftests/timers/rtctest.c test program and hour format is used to 12 hour mode in Odroid-XU3 board. One more issue is the RTC doesn't keep time on Odroid-XU3 board when i turn on board after power off even if RTC battery is connected. It can be solved as setting WUDR & RUDR bits to high at the same time after RTC_CTRL register is written. It's same with condition of only writing ALARM registers, so this is for only S2MPS14 and we should set WUDR & A_UDR bits to high on S2MPS13. I can't find any reasonable description about this like fix from datasheet, but can find similar codes from rtc driver source of hardkernel kernel and vendor kernel. Signed-off-by:
Joonyoung Shim <jy0922.shim@samsung.com> Reviewed-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by:
-
Takashi Iwai authored
commit a161574e upstream. It turned out that the machine has a bass speaker, so take a correct fixup entry. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=102501Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit bb148bde upstream. According to the bug report, FSC Amilo laptops with ALC880 can detect the headphone jack but currently the driver disables it. It's partly intentionally, as non-working jack detect was reported in the past. Let's enable now. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=102501Signed-off-by:
-
