- 30 Nov, 2016 2 commits
-
-
Chen-Yu Tsai authored
The codec on the H3 is similar to the one found on the A31. One key difference is the analog path controls are routed through the PRCM block. This is supported by the sun8i-codec-analog driver, and tied into this codec driver with the audio card's aux_dev. In addition, the H3 has no HP (headphone) and HBIAS support, and no MIC3 input. The FIFO related registers are slightly rearranged. Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Acked-by:
Rob Herring <robh@kernel.org> Acked-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
Mark Brown <broonie@kernel.org>
-
Chen-Yu Tsai authored
The codec in the A23 is similar to the one found on the A31. One key difference is the analog path controls are routed through the PRCM block. This is supported by the sun8i-codec-analog driver, and tied into this codec driver with the audio card's aux_dev. In addition, the A23 does not have LINEOUT, and it does not support headset jack detection or buttons. Signed-off-by:
-
- 24 Nov, 2016 1 commit
-
-
Dan Carpenter authored
Oddly enough, my version of GCC misses this uninitialized variable. Fixes: ba2ff302 ("ASoC: sunxi: Add support for A23/A33/H3 codec's analog path controls") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
-
- 22 Nov, 2016 2 commits
-
-
Chen-Yu Tsai authored
The internal codec on A23/A33/H3 is split into 2 parts. The analog path controls are routed through an embedded custom register bus accessed through the PRCM block. The SoCs share a common set of inputs, outputs, and audio paths. The following table lists the differences. ---------------------------------------- | Feature \ SoC | A23 | A33 | H3 | ---------------------------------------- | Headphone | v | v | | ---------------------------------------- | Line Out | | | v | ---------------------------------------- | Phone In/Out | v | v | | ---------------------------------------- Add an ASoC component driver for it. This should be tied to the codec audio card as an auxiliary device. This patch adds the commont paths and controls, and variant specific headphone out and line out. Signed-off-by: -
Chen-Yu Tsai authored
The internal codec on A23/A33/H3 is split into 2 parts. The analog path controls are routed through an embedded custom register bus accessed through the PRCM block. The SoCs share a common set of inputs, outputs, and audio paths. The following table lists the differences. ---------------------------------------- | Feature \ SoC | A23 | A33 | H3 | ---------------------------------------- | Headphone | v | v | | ---------------------------------------- | Line Out | | | v | ---------------------------------------- | Phone In/Out | v | v | | ---------------------------------------- Add a binding for this hardware. Signed-off-by:
-
- 10 Nov, 2016 1 commit
-
-
kbuild test robot authored
sound/soc/sunxi/sun4i-codec.c:1339:2-3: Unneeded semicolon Remove unneeded semicolon. Generated by: scripts/coccinelle/misc/semicolon.cocci Signed-off-by:
Fengguang Wu <fengguang.wu@intel.com> Acked-by:
-
- 09 Nov, 2016 3 commits
-
-
Chen-Yu Tsai authored
The later Allwinner SoCs have a dedicated reset controller, and peripherals have dedicated reset controls which need to be deasserted before the associated peripheral can be used. Add support for this to the quirks structure and probe/remove functions. Signed-off-by:
-
Chen-Yu Tsai authored
The A31's internal codec capture path has a mixer in front of the ADC for each channel, capable of selecting various inputs, including microphones, line in, phone in, and the main output mixer. This patch adds the various controls, widgets and routes needed for audio capture from the already supported inputs on the A31. Signed-off-by:
-
Maxime Ripard authored
In our i2s driver, we were previously trying to guess which oversample the user wanted to use by looking at the rate and trying to max it. However, the cards, and especially simple-card with its mclk-fs property will already provide the expected oversample ratio by using the set_sysclk callback. We can thus implement it and remove the logic to deal with the runtime guess. Signed-off-by:
-
- 04 Nov, 2016 4 commits
-
-
Chen-Yu Tsai authored
The A31 SoC's codec has various inputs, outputs and microphone bias supplies. These can be routed on the board in different ways, such as: - HPCOM may be connected to have the headphone DC coupled. - Microphones all use the MBIAS main microphone supply or one mic may use the HBIAS supply, which supports headset detection and buttons. - Line Out may be routed to an audio jack, or an onboard speaker amp with power controls. Add support for specifying the audio routes in the device tree. Signed-off-by: -
Chen-Yu Tsai authored
The A31 internal codec has 3 microphone outputs, of which MIC2 and MIC3 are muxed internally. The resulting two microphone inputs have separate gain controls and mixer inputs. The codec also has 2 microphone bias pins. HBIAS is specifically for the headphone jack, which also supports headphone detection and control buttons. These extra functions are not supported yet. The other, MBIAS, is for all other analog microphones. There is also mention of digital microphone support, but documentation is scarce, and no hardware with it is available. Signed-off-by:
-
Chen-Yu Tsai authored
The A31 integrated codec has a second "Line Out" output which does not include an integrated amplifier in its path. This path does have a separate volume control. This patch adds support for the playback path from the DAC to the Line Out pins. Signed-off-by:
-
Mark Brown authored
Merge branch 'topic/dapm' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-sunxi
-
- 03 Nov, 2016 8 commits
-
-
Chen-Yu Tsai authored
The A31 integrated codec has a stereo "Line In" input. Add support for it to the playback paths. Signed-off-by:
-
Chen-Yu Tsai authored
The A31 has a similar codec to the A10/A20. The PCM parts are very similar, with different register offsets. The analog paths are very different. There are more inputs and outputs. The ADC mux has been replaced with a proper mixer. This patch adds support for the basic playback path of the A31 codec, from the DAC to the headphones. Headphone detection, microphone, signaling, other inputs/outputs and capture will be added later. Signed-off-by:
-
Chen-Yu Tsai authored
According to the DMA engine API documentation, maxburst denotes the largest possible size of a single transfer, so as not to overflow destination FIFOs as explained in this excerpt from dmaengine.h * @src_maxburst: the maximum number of words (note: words, as in * units of the src_addr_width member, not bytes) that can be sent * in one burst to the device. Typically something like half the * FIFO depth on I/O peripherals so you don't overflow it. This * may or may not be applicable on memory sources. * @dst_maxburst: same as src_maxburst but for destination target * mutatis mutandis. The TX FIFO is 64 samples deep for stereo, and the RX FIFO is 16 samples deep. So maxburst could be 32 and 8 for TX and RX respectively. Unfortunately the sunxi DMA controller driver takes maxburst as the requested burst size, rather than a limit, and returns an error for unsupported values. The original value was 4, but some later SoCs do not officially support this burst size. This patch increases maxburst on the TX side to 8, which is supported by all variants of the sunxi DMA controller. Signed-off-by:
-
Chen-Yu Tsai authored
The A31 has a similar codec to the A10/A20. The PCM parts are very similar, with just different register offsets. The analog paths are very different. There are more inputs and outputs. The A31s, A23, and H3 have a similar PCM interface, again with register offsets slightly rearranged. The analog path controls, while very similar between them and the A31, have been moved a separate bus which is accessed through a message box like interface in the PRCM address range. This would be handled by a separate auxiliary device tied in through the device tree in its supporting create_card function. The quirks structure is expanded to include different register offsets and separate callbacks for creating the ASoC card. The regmap_config, quirks, and of_device_match tables have been moved to facilitate this. Signed-off-by:
-
Mark Brown authored
Merge branch 'fix/sunxi' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-sunxi
-
Chen-Yu Tsai authored
This revises existing comments in the register definition macros section, and adds a few more, so that readers can clearly identify the types of control registers. Signed-off-by:
-
Chen-Yu Tsai authored
The audio codec on later Allwinner SoCs have a different layout and audio path compared to the A10/A20. However the PCM parts are still the same. The different layout and audio paths mean we need a different create_card function for different families, so they can create DAPM endpoint widgets and routes. This patch moves the regmap configs, quirks and of_device_id structures to just before the probe function, so we can, among other things, include a pointer for the create_card function. None of the lines of code were changed. Signed-off-by:
-
Maxime Ripard authored
The i2s driver was only implementing playback for now. Implement capture to make sure that's not a limitation anymore. Signed-off-by:
-
- 02 Nov, 2016 4 commits
-
-
Chen-Yu Tsai authored
A DAPM_DOUBLE_R control type can be used for dual channel mixer input selectors / mute controls across 2 registers, possibly toggling both channels together. The control is meant to be shared by 2 widgets, 1 for each channel, such that the mixer control exposed to userspace remains a combined stereo control. Signed-off-by:
-
Chen-Yu Tsai authored
A DAPM_DOUBLE control type can be used for dual channel mixer input selectors / mute controls in one register, possibly toggling both channels together. The control is meant to be shared by 2 widgets, 1 for each channel, such that the mixer control exposed to userspace remains a combined stereo control. Signed-off-by:
-
Chen-Yu Tsai authored
While DAPM is mono or single channel, its controls can be shared between widgets, such as sharing one stereo mixer control between the left and right channel widgets. An example such as the following routes [Line In Left]----------<Line In Playback Switch>-------[Left Mixer] ^ ^ ^ | ^ (inputs) (paths) <shared stereo mixer control> (outputs) v v | v v [Line In Right]---------<Line In Playback Switch>-------[Right Mixer] where we have separate widgets and paths for the left and right channels from "Line In" to "Mixer", but a shared stereo mixer control for the 2 paths. This patch introduces support for such shared mixer controls, allowing more than 1 path to be attached to a single stereo control, and being able to control left/right channels independently. Signed-off-by: -
Chen-Yu Tsai authored
To support double channel shared controls split across 2 registers, one for each channel, we must be able to update both registers together. Add a second set of register fields to struct snd_soc_dapm_update, and update the DAPM control writeback (put) callbacks to support this. For codecs that use custom events which call into DAPM to do updates, also clear struct snd_soc_dapm_update before using it, so the second set of fields remains clean. Signed-off-by:
-
- 01 Nov, 2016 1 commit
-
-
Chen-Yu Tsai authored
In the current probe function the GPIO is acquired after the codec's bus clock is enabled. However if it fails to acquire the GPIO due to a deferred probe, it does not disable the bus clock before bailing out. This would result in the clock being enabled multiple times. Move the code that enables the bus clock after the part that gets the GPIO, maintaining a separation between resource acquisition and device enablement in the probe function. Signed-off-by:
-
- 31 Oct, 2016 1 commit
-
-
Chen-Yu Tsai authored
When sun4i_codec_create_card fails, we do not assign a proper error code to the return value. The return value would be 0 from the previous function call, or we would have bailed out sooner. This would confuse the driver core into thinking the device probe succeeded, when in fact it didn't, leaving various devres based resources lingering. Make the create_card function pass back a meaningful error code, and assign it to the return value. Fixes: 45fb6b6f ("ASoC: sunxi: add support for the on-chip codec on early Allwinner SoCs") Signed-off-by:
-
- 15 Oct, 2016 13 commits
-
-
Linus Torvalds authored
-
git://github.com/luisbg/linux-befsLinus Torvalds authored
Pull befs fixes from Luis de Bethencourt: "I recently took maintainership of the befs file system [0]. This is the first time I send you a git pull request, so please let me know if all the below is OK. Salah Triki and myself have been cleaning the code and fixing a few small bugs. Sorry I couldn't send this sooner in the merge window, I was waiting to have my GPG key signed by kernel members at ELCE in Berlin a few days ago." [0] https://lkml.org/lkml/2016/7/27/502 * tag 'befs-v4.9-rc1' of git://github.com/luisbg/linux-befs: (39 commits) befs: befs: fix style issues in datastream.c befs: improve documentation in datastream.c befs: fix typos in datastream.c befs: fix typos in btree.c befs: fix style issues in super.c befs: fix comment style befs: add check for ag_shift in superblock befs: dump inode_size superblock information befs: remove unnecessary initialization befs: fix typo in befs_sb_info befs: add flags field to validate superblock state befs: fix typo in befs_find_key befs: remove unused BEFS_BT_PARMATCH fs: befs: remove ret variable fs: befs: remove in vain variable assignment fs: befs: remove unnecessary *befs_sb variable fs: befs: remove useless initialization to zero fs: befs: remove in vain variable assignment fs: befs: Insert NULL inode to dentry fs: befs: Remove useless calls to brelse in befs_find_brun_dblindirect ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linuxLinus Torvalds authored
Pull gcc plugins update from Kees Cook: "This adds a new gcc plugin named "latent_entropy". It is designed to extract as much possible uncertainty from a running system at boot time as possible, hoping to capitalize on any possible variation in CPU operation (due to runtime data differences, hardware differences, SMP ordering, thermal timing variation, cache behavior, etc). At the very least, this plugin is a much more comprehensive example for how to manipulate kernel code using the gcc plugin internals" * tag 'gcc-plugins-v4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: latent_entropy: Mark functions with __latent_entropy gcc-plugins: Add latent_entropy plugin
-
git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds authored
Pull MIPS updates from Ralf Baechle: "This is the main MIPS pull request for 4.9: MIPS core arch code: - traps: 64bit kernels should read CP0_EBase 64bit - traps: Convert ebase to KSEG0 - c-r4k: Drop bc_wback_inv() from icache flush - c-r4k: Split user/kernel flush_icache_range() - cacheflush: Use __flush_icache_user_range() - uprobes: Flush icache via kernel address - KVM: Use __local_flush_icache_user_range() - c-r4k: Fix flush_icache_range() for EVA - Fix -mabi=64 build of vdso.lds - VDSO: Drop duplicated -I*/-E* aflags - tracing: move insn_has_delay_slot to a shared header - tracing: disable uprobe/kprobe on compact branch instructions - ptrace: Fix regs_return_value for kernel context - Squash lines for simple wrapper functions - Move identification of VP(E) into proc.c from smp-mt.c - Add definitions of SYNC barrierstype values - traps: Ensure full EBase is written - tlb-r4k: If there are wired entries, don't use TLBINVF - Sanitise coherentio semantics - dma-default: Don't check hw_coherentio if device is non-coherent - Support per-device DMA coherence - Adjust MIPS64 CAC_BASE to reflect Config.K0 - Support generating Flattened Image Trees (.itb) - generic: Introduce generic DT-based board support - generic: Convert SEAD-3 to a generic board - Enable hardened usercopy - Don't specify STACKPROTECTOR in defconfigs Octeon: - Delete dead code and files across the platform. - Change to use all memory into use by default. - Rename upper case variables in setup code to lowercase. - Delete legacy hack for broken bootloaders. - Leave maintaining the link state to the actual ethernet/PHY drivers. - Add DTS for D-Link DSR-500N. - Fix PCI interrupt routing on D-Link DSR-500N. Pistachio: - Remove ANDROID_TIMED_OUTPUT from defconfig TX39xx: - Move GPIO setup from .mem_setup() to .arch_init() - Convert to Common Clock Framework TX49xx: - Move GPIO setup from .mem_setup() to .arch_init() - Convert to Common Clock Framework txx9wdt: - Add missing clock (un)prepare calls for CCF BMIPS: - Add PW, GPIO SDHCI and NAND device node names - Support APPENDED_DTB - Add missing bcm97435svmb to DT_NONE - Rename bcm96358nb4ser to bcm6358-neufbox4-sercom - Add DT examples for BCM63268, BCM3368 and BCM6362 - Add support for BCM3368 and BCM6362 PCI - Reduce stack frame usage - Use struct list_head lists - Support for CONFIG_PCI_DOMAINS_GENERIC - Make pcibios_set_cache_line_size an initcall - Inline pcibios_assign_all_busses - Split pci.c into pci.c & pci-legacy.c - Introduce CONFIG_PCI_DRIVERS_LEGACY - Support generic drivers CPC - Convert bare 'unsigned' to 'unsigned int' - Avoid lock when MIPS CM >= 3 is present GIC: - Delete unused file smp-gic.c mt7620: - Delete unnecessary assignment for the field "owner" from PCI BCM63xx: - Let clk_disable() return immediately if clk is NULL pm-cps: - Change FSB workaround to CPU blacklist - Update comments on barrier instructions - Use MIPS standard lightweight ordering barrier - Use MIPS standard completion barrier - Remove selection of sync types - Add MIPSr6 CPU support - Support CM3 changes to Coherence Enable Register SMP: - Wrap call to mips_cpc_lock_other in mips_cm_lock_other - Introduce mechanism for freeing and allocating IPIs cpuidle: - cpuidle-cps: Enable use with MIPSr6 CPUs. SEAD3: - Rewrite to use DT and generic kernel feature. USB: - host: ehci-sead3: Remove SEAD-3 EHCI code FBDEV: - cobalt_lcdfb: Drop SEAD3 support dt-bindings: - Document a binding for simple ASCII LCDs auxdisplay: - img-ascii-lcd: driver for simple ASCII LCD displays irqchip i8259: - i8259: Add domain before mapping parent irq - i8259: Allow platforms to override poll function - i8259: Remove unused i8259A_irq_pending Malta: - Rewrite to use DT of/platform: - Probe "isa" busses by default CM: - Print CM error reports upon bus errors Module: - Migrate exception table users off module.h and onto extable.h - Make various drivers explicitly non-modular: - Audit and remove any unnecessary uses of module.h mailmap: - Canonicalize to Qais' current email address. Documentation: - MIPS supports HAVE_REGS_AND_STACK_ACCESS_API Loongson1C: - Add CPU support for Loongson1C - Add board support - Add defconfig - Add RTC support for Loongson1C board All this except one Documentation fix has sat in linux-next and has survived Imagination's automated build test system" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (127 commits) Documentation: MIPS supports HAVE_REGS_AND_STACK_ACCESS_API MIPS: ptrace: Fix regs_return_value for kernel context MIPS: VDSO: Drop duplicated -I*/-E* aflags MIPS: Fix -mabi=64 build of vdso.lds MIPS: Enable hardened usercopy MIPS: generic: Convert SEAD-3 to a generic board MIPS: generic: Introduce generic DT-based board support MIPS: Support generating Flattened Image Trees (.itb) MIPS: Adjust MIPS64 CAC_BASE to reflect Config.K0 MIPS: Print CM error reports upon bus errors MIPS: Support per-device DMA coherence MIPS: dma-default: Don't check hw_coherentio if device is non-coherent MIPS: Sanitise coherentio semantics MIPS: PCI: Support generic drivers MIPS: PCI: Introduce CONFIG_PCI_DRIVERS_LEGACY MIPS: PCI: Split pci.c into pci.c & pci-legacy.c MIPS: PCI: Inline pcibios_assign_all_busses MIPS: PCI: Make pcibios_set_cache_line_size an initcall MIPS: PCI: Support for CONFIG_PCI_DOMAINS_GENERIC MIPS: PCI: Use struct list_head lists ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/soundLinus Torvalds authored
Pull sound fixes from Takashi Iwai: "Just a few trivial small fixes" * tag 'sound-fix-4.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: line6: fix a crash in line6_hwdep_write() ALSA: seq: fix passing wrong pointer in function call of compatibility layer ALSA: hda - Fix a failure of micmute led when having multi adcs ALSA: line6: Fix POD X3 Live audio input
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull more misc uaccess and vfs updates from Al Viro: "The rest of the stuff from -next (more uaccess work) + assorted fixes" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: score: traps: Add missing include file to fix build error fs/super.c: don't fool lockdep in freeze_super() and thaw_super() paths fs/super.c: fix race between freeze_super() and thaw_super() overlayfs: Fix setting IOP_XATTR flag iov_iter: kernel-doc import_iovec() and rw_copy_check_uvector() blackfin: no access_ok() for __copy_{to,from}_user() arm64: don't zero in __copy_from_user{,_inatomic} arm: don't zero in __copy_from_user_inatomic()/__copy_from_user() arc: don't leak bits of kernel stack into coredump alpha: get rid of tail-zeroing in __copy_user()
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Including: - nine bug fixes for stable. Some of these we found at the recent two weeks of SMB3 test events/plugfests. - significant improvements in reconnection (e.g. if server or network crashes) especially when mounted with "persistenthandles" or to server which advertises Continuous Availability on the share. - a new mount option "idsfromsid" which improves POSIX compatibility in some cases (when winbind not configured e.g.) by better (and faster) fetching uid/gid from acl (when "cifsacl" mount option is enabled). NB: we are almost complete work on "cifsacl" (querying mode/uid/gid from ACL) for SMB3, but SMB3 support for cifsacl is not included in this set. - improved handling for SMB3 "credits" (even if server is buggy) Still working on two sets of changes: - cifsacl enablement for SMB3 - cleanup of RFC1001 length calculation (so we can handle encryption and multichannel and RDMA) And a couple of new bugs were reported recently (unrelated to above) so will probably have another merge request next week" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: (21 commits) CIFS: Retrieve uid and gid from special sid if enabled CIFS: Add new mount option to set owner uid and gid from special sids in acl CIFS: Reset read oplock to NONE if we have mandatory locks after reopen CIFS: Fix persistent handles re-opening on reconnect SMB2: Separate RawNTLMSSP authentication from SMB2_sess_setup SMB2: Separate Kerberos authentication from SMB2_sess_setup Expose cifs module parameters in sysfs Cleanup missing frees on some ioctls Enable previous version support Do not send SMB3 SET_INFO request if nothing is changing SMB3: Add mount parameter to allow user to override max credits fs/cifs: reopen persistent handles on reconnect Clarify locking of cifs file and tcon structures and make more granular Fix regression which breaks DFS mounting fs/cifs: keep guid when assigning fid to fileinfo SMB3: GUIDs should be constructed as random but valid uuids Set previous session id correctly on SMB3 reconnect cifs: Limit the overall credit acquired Display number of credits available Add way to query creation time of file via cifs xattr ... -
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfsLinus Torvalds authored
Pull btrfs fixes from Chris Mason: "Some fixes from Omar and Dave Sterba for our new free space tree. This isn't heavily used yet, but as we move toward making it the new default we wanted to nail down an endian bug" * 'for-linus-4.9' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: tests: uninline member definitions in free_space_extent btrfs: tests: constify free space extent specs Btrfs: expand free space tree sanity tests to catch endianness bug Btrfs: fix extent buffer bitmap tests on big-endian systems Btrfs: catch invalid free space trees Btrfs: fix mount -o clear_cache,space_cache=v2 Btrfs: fix free space tree bitmaps on big-endian systems
-
Al Viro authored
-
Guenter Roeck authored
score images fail to build as follows. arch/score/kernel/traps.c: In function 'show_stack': arch/score/kernel/traps.c:55:3: error: implicit declaration of function '__get_user' __get_user() is declared in asm/uaccess.h, which was previously included through asm/module.h. Cc: Al Viro <viro@zeniv.linux.org.uk> Fixes: 88dd4a74 ("score: separate extable.h, switch module.h to it") Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk>
-
Oleg Nesterov authored
sb_wait_write()->percpu_rwsem_release() fools lockdep to avoid the false-positives. Now that xfs was fixed by Dave's commit dbad7c99 ("xfs: stop holding ILOCK over filldir callbacks") we can remove it and change freeze_super() and thaw_super() to run with s_writers.rw_sem locks held; we add two trivial helpers for that, lockdep_sb_freeze_release() and lockdep_sb_freeze_acquire(). xfstests-dev/check `grep -il freeze tests/*/???` does not trigger any warning from lockdep. Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfsLinus Torvalds authored
Pull overlayfs updates from Miklos Szeredi: "This update contains fixes to the "use mounter's permission to access underlying layers" area, and miscellaneous other fixes and cleanups. No new features this time" * 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: use vfs_get_link() vfs: add vfs_get_link() helper ovl: use generic_readlink ovl: explain error values when removing acl from workdir ovl: Fix info leak in ovl_lookup_temp() ovl: during copy up, switch to mounter's creds early ovl: lookup: do getxattr with mounter's permission ovl: copy_up_xattr(): use strnlen
-
Oleg Nesterov authored
Change thaw_super() to check frozen != SB_FREEZE_COMPLETE rather than frozen == SB_UNFROZEN, otherwise it can race with freeze_super() which drops sb->s_umount after SB_FREEZE_WRITE to preserve the lock ordering. In this case thaw_super() will wrongly call s_op->unfreeze_fs() before it was actually frozen, and call sb_freeze_unlock() which leads to the unbalanced percpu_up_write(). Unfortunately lockdep can't detect this, so this triggers misc BUG_ON()'s in kernel/rcu/sync.c. Reported-and-tested-by:
Nikolay Borisov <kernel@kyup.com> Signed-off-by:
-
