- 26 Sep, 2018 8 commits
-
-
Chao Yu authored
Mark inode dirty explicitly in the end of recover_inode() to make sure that all recoverable fields can be persisted later. Signed-off-by:
Chao Yu <yuchao0@huawei.com> Signed-off-by:
Jaegeuk Kim <jaegeuk@kernel.org>
-
Chao Yu authored
Testcase to reproduce this bug: 1. mkfs.f2fs -O extra_attr -O inode_crtime /dev/sdd 2. mount -t f2fs /dev/sdd /mnt/f2fs 3. touch /mnt/f2fs/file 4. xfs_io -f /mnt/f2fs/file -c "fsync" 5. godown /mnt/f2fs 6. umount /mnt/f2fs 7. mount -t f2fs /dev/sdd /mnt/f2fs 8. xfs_io -f /mnt/f2fs/file -c "statx -r" stat.btime.tv_sec = 0 stat.btime.tv_nsec = 0 This patch fixes to recover inode creation time fields during mount. Signed-off-by:
-
Chao Yu authored
inode.i_gc_failures is used to indicate that skip count of migrating on blocks of inode, we should guarantee it can be recovered in sudden power-off case. Signed-off-by:
-
Chao Yu authored
Testcase to reproduce this bug: 1. mkfs.f2fs /dev/sdd 2. mount -t f2fs /dev/sdd /mnt/f2fs 3. touch /mnt/f2fs/file 4. sync 5. chattr +A /mnt/f2fs/file 6. xfs_io -f /mnt/f2fs/file -c "fsync" 7. godown /mnt/f2fs 8. umount /mnt/f2fs 9. mount -t f2fs /dev/sdd /mnt/f2fs 10. lsattr /mnt/f2fs/file -----------------N- /mnt/f2fs/file But actually, we expect the corrct result is: -------A---------N- /mnt/f2fs/file The reason is we didn't recover inode.i_flags field during mount, fix it. Signed-off-by:
-
Chao Yu authored
Testcase to reproduce this bug: 1. mkfs.f2fs -O extra_attr -O project_quota /dev/sdd 2. mount -t f2fs /dev/sdd /mnt/f2fs 3. touch /mnt/f2fs/file 4. sync 5. chattr -p 1 /mnt/f2fs/file 6. xfs_io -f /mnt/f2fs/file -c "fsync" 7. godown /mnt/f2fs 8. umount /mnt/f2fs 9. mount -t f2fs /dev/sdd /mnt/f2fs 10. lsattr -p /mnt/f2fs/file 0 -----------------N- /mnt/f2fs/file But actually, we expect the correct result is: 1 -----------------N- /mnt/f2fs/file The reason is we didn't recover inode.i_projid field during mount, fix it. Signed-off-by: -
Jaegeuk Kim authored
This is related to ee70daab ("xfs: update i_size after unwritten conversion in dio completion") If we update i_size during dio_write, dio_read can read out stale data, which breaks xfstests/465. Reviewed-by:
-
Jaegeuk Kim authored
This fixes wrong error report in f2fs_rename. Reviewed-by:
-
Chengguang Xu authored
Currently we show mount option "io_bits=%u" as "io_size=%uKB", it will cause option parsing problem(unrecognized mount option) in remount. Signed-off-by:
Chengguang Xu <cgxu519@gmx.com> Reviewed-by:
-
- 20 Sep, 2018 2 commits
-
-
Chao Yu authored
Step to reproduce this bug: 1. logon as root 2. mount -t f2fs /dev/sdd /mnt; 3. touch /mnt/file; 4. chown system /mnt/file; chgrp system /mnt/file; 5. xfs_io -f /mnt/file -c "fsync"; 6. godown /mnt; 7. umount /mnt; 8. mount -t f2fs /dev/sdd /mnt; After step 8) we will expect file's uid/gid are all system, but during recovery, these two fields were not been recovered, fix it. Signed-off-by:
-
Jaegeuk Kim authored
If we have an error in f2fs_build_free_nids, we're able to fall into a loop to find free nids. Suggested-by:
Chao Yu <chao@kernel.org> Reviewed-by:
-
- 19 Sep, 2018 1 commit
-
-
Sahitya Tummala authored
This helps to control the frequency of submission of discard and GC requests independently, based on the need. Suggested-by:
Sahitya Tummala <stummala@codeaurora.org> Reviewed-by:
-
- 12 Sep, 2018 9 commits
-
-
Chao Yu authored
This patch adds to support injecting error for write IO, this can simulate IO error like fail_make_request or dm_flakey does. Signed-off-by:
-
Chao Yu authored
Remove the verbose license text from f2fs files and replace them with SPDX tags. This does not change the license of any of the code. Signed-off-by:
-
Chengguang Xu authored
It's a little bit strange when fault_injection related options fail with -EINVAL which were already disabled from config, so surround all fault_injection related option parsing code using CONFIG_F2FS_FAULT_INJECTION. Meanwhile, slightly change warning message to keep consistency with option POSIX_ACL and FS_XATTR. Signed-off-by:
-
Wang Shilong authored
Currently, project quota could be changed by fssetxattr ioctl, and existed permission check inode_owner_or_capable() is obviously not enough, just think that common users could change project id of file, that could make users to break project quota easily. This patch try to follow same regular of xfs project quota: "Project Quota ID state is only allowed to change from within the init namespace. Enforce that restriction only if we are trying to change the quota ID state. Everything else is allowed in user namespaces." Besides that, check and set project id'state should be an atomic operation, protect whole operation with inode lock. Signed-off-by:
Wang Shilong <wshilong@ddn.com> Reviewed-by:
-
Zhikang Zhang authored
In the call trace below, we might sleep in function dput(). So in order to avoid sleeping under spin_lock, we remove f2fs_mark_inode_dirty_sync from __try_update_largest_extent && __drop_largest_extent. BUG: sleeping function called from invalid context at fs/dcache.c:796 Call trace: dump_backtrace+0x0/0x3f4 show_stack+0x24/0x30 dump_stack+0xe0/0x138 ___might_sleep+0x2a8/0x2c8 __might_sleep+0x78/0x10c dput+0x7c/0x750 block_dump___mark_inode_dirty+0x120/0x17c __mark_inode_dirty+0x344/0x11f0 f2fs_mark_inode_dirty_sync+0x40/0x50 __insert_extent_tree+0x2e0/0x2f4 f2fs_update_extent_tree_range+0xcf4/0xde8 f2fs_update_extent_cache+0x114/0x12c f2fs_update_data_blkaddr+0x40/0x50 write_data_page+0x150/0x314 do_write_data_page+0x648/0x2318 __write_data_page+0xdb4/0x1640 f2fs_write_cache_pages+0x768/0xafc __f2fs_write_data_pages+0x590/0x1218 f2fs_write_data_pages+0x64/0x74 do_writepages+0x74/0xe4 __writeback_single_inode+0xdc/0x15f0 writeback_sb_inodes+0x574/0xc98 __writeback_inodes_wb+0x190/0x204 wb_writeback+0x730/0xf14 wb_check_old_data_flush+0x1bc/0x1c8 wb_workfn+0x554/0xf74 process_one_work+0x440/0x118c worker_thread+0xac/0x974 kthread+0x1a0/0x1c8 ret_from_fork+0x10/0x1c Signed-off-by:
Zhikang Zhang <zhangzhikang1@huawei.com> Reviewed-by:
-
Chao Yu authored
Add a plug to merge readahead IO in readdir(), expecting it can reduce bio count before submitting to block layer. Signed-off-by:
-
Chao Yu authored
https://bugzilla.kernel.org/show_bug.cgi?id=200219 Reproduction way: - mount image - run poc code - umount image F2FS-fs (loop1): Bitmap was wrongly set, blk:15364 ------------[ cut here ]------------ kernel BUG at /home/yuchao/git/devf2fs/segment.c:2061! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 2 PID: 17686 Comm: umount Tainted: G W O 4.18.0-rc2+ #39 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 EIP: update_sit_entry+0x459/0x4e0 [f2fs] Code: e8 1c b5 fd ff 0f 0b 0f 0b 8b 45 e4 c7 44 24 08 9c 7a 6c f8 c7 44 24 04 bc 4a 6c f8 89 44 24 0c 8b 06 89 04 24 e8 f7 b4 fd ff <0f> 0b 8b 45 e4 0f b6 d2 89 54 24 10 c7 44 24 08 60 7a 6c f8 c7 44 EAX: 00000032 EBX: 000000f8 ECX: 00000002 EDX: 00000001 ESI: d7177000 EDI: f520fe68 EBP: d6477c6c ESP: d6477c34 DS: 007b ES: 007b FS: 00d8 GS: 00e0 SS: 0068 EFLAGS: 00010282 CR0: 80050033 CR2: b7fbe000 CR3: 2a99b3c0 CR4: 000406f0 Call Trace: f2fs_allocate_data_block+0x124/0x580 [f2fs] do_write_page+0x78/0x150 [f2fs] f2fs_do_write_node_page+0x25/0xa0 [f2fs] __write_node_page+0x2bf/0x550 [f2fs] f2fs_sync_node_pages+0x60e/0x6d0 [f2fs] ? sync_inode_metadata+0x2f/0x40 ? f2fs_write_checkpoint+0x28f/0x7d0 [f2fs] ? up_write+0x1e/0x80 f2fs_write_checkpoint+0x2a9/0x7d0 [f2fs] ? mark_held_locks+0x5d/0x80 ? _raw_spin_unlock_irq+0x27/0x50 kill_f2fs_super+0x68/0x90 [f2fs] deactivate_locked_super+0x3d/0x70 deactivate_super+0x40/0x60 cleanup_mnt+0x39/0x70 __cleanup_mnt+0x10/0x20 task_work_run+0x81/0xa0 exit_to_usermode_loop+0x59/0xa7 do_fast_syscall_32+0x1f5/0x22c entry_SYSENTER_32+0x53/0x86 EIP: 0xb7f95c51 Code: c1 1e f7 ff ff 89 e5 8b 55 08 85 d2 8b 81 64 cd ff ff 74 02 89 02 5d c3 8b 0c 24 c3 8b 1c 24 c3 90 51 52 55 89 e5 0f 34 cd 80 <5d> 5a 59 c3 90 90 90 90 8d 76 00 58 b8 77 00 00 00 cd 80 90 8d 76 EAX: 00000000 EBX: 0871ab90 ECX: bfb2cd00 EDX: 00000000 ESI: 00000000 EDI: 0871ab90 EBP: 0871ab90 ESP: bfb2cd7c DS: 007b ES: 007b FS: 0000 GS: 0033 SS: 007b EFLAGS: 00000246 Modules linked in: f2fs(O) crc32_generic bnep rfcomm bluetooth ecdh_generic snd_intel8x0 snd_ac97_codec ac97_bus snd_pcm snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq pcbc joydev aesni_intel snd_seq_device aes_i586 snd_timer crypto_simd snd cryptd soundcore mac_hid serio_raw video i2c_piix4 parport_pc ppdev lp parport hid_generic psmouse usbhid hid e1000 [last unloaded: f2fs] ---[ end trace d423f83982cfcdc5 ]--- The reason is, different log headers using the same segment, once one log's next block address is used by another log, it will cause panic as above. Main area: 24 segs, 24 secs 24 zones - COLD data: 0, 0, 0 - WARM data: 1, 1, 1 - HOT data: 20, 20, 20 - Dir dnode: 22, 22, 22 - File dnode: 22, 22, 22 - Indir nodes: 21, 21, 21 So this patch adds sanity check to detect such condition to avoid this issue. Signed-off-by:
-
Chao Yu authored
In fill_super -> init_percpu_info, we should destroy percpu counter in error path, otherwise memory allcoated for percpu counter will leak. Signed-off-by:
-
Chao Yu authored
It needs to release memory allocated for sbi->write_io in error path, otherwise, it will cause memory leak. Signed-off-by:
-
- 11 Sep, 2018 3 commits
-
-
Chengguang Xu authored
default_acl and acl of newly created inode will be initiated as ACL_NOT_CACHED in vfs function inode_init_always() and later will be updated by calling xxx_init_acl() in specific filesystems. Howerver, when default_acl and acl are NULL then they keep the value of ACL_NOT_CACHED, this patch tries to cache NULL for acl/default_acl in this case. Signed-off-by:
-
Chao Yu authored
generic/417 reported as blow: ------------[ cut here ]------------ kernel BUG at /home/yuchao/git/devf2fs/inode.c:695! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 1 PID: 21697 Comm: umount Tainted: G W O 4.18.0-rc2+ #39 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 EIP: f2fs_evict_inode+0x556/0x580 [f2fs] Call Trace: ? _raw_spin_unlock+0x2c/0x50 evict+0xa8/0x170 dispose_list+0x34/0x40 evict_inodes+0x118/0x120 generic_shutdown_super+0x41/0x100 ? rcu_read_lock_sched_held+0x97/0xa0 kill_block_super+0x22/0x50 kill_f2fs_super+0x6f/0x80 [f2fs] deactivate_locked_super+0x3d/0x70 deactivate_super+0x40/0x60 cleanup_mnt+0x39/0x70 __cleanup_mnt+0x10/0x20 task_work_run+0x81/0xa0 exit_to_usermode_loop+0x59/0xa7 do_fast_syscall_32+0x1f5/0x22c entry_SYSENTER_32+0x53/0x86 EIP: f2fs_evict_inode+0x556/0x580 [f2fs] It can simply reproduced with scripts: Enable quota feature during mkfs. Testcase1: 1. mkfs.f2fs /dev/zram0 2. mount -t f2fs /dev/zram0 /mnt/f2fs 3. xfs_io -f /mnt/f2fs/file -c "pwrite 0 4k" -c "fsync" 4. godown /mnt/f2fs 5. umount /mnt/f2fs 6. mount -t f2fs -o ro /dev/zram0 /mnt/f2fs 7. umount /mnt/f2fs Testcase2: 1. mkfs.f2fs /dev/zram0 2. mount -t f2fs /dev/zram0 /mnt/f2fs 3. touch /mnt/f2fs/file 4. create process[pid = x] do: a) open /mnt/f2fs/file; b) unlink /mnt/f2fs/file 5. godown -f /mnt/f2fs 6. kill process[pid = x] 7. umount /mnt/f2fs 8. mount -t f2fs -o ro /dev/zram0 /mnt/f2fs 9. umount /mnt/f2fs The reason is: during recovery, i_{c,m}time of inode will be updated, then the inode can be set dirty w/o being tracked in sbi->inode_list[DIRTY_META] global list, so later write_checkpoint will not flush such dirty inode into node page. Once umount is called, sync_filesystem() in generic_shutdown_super() will skip syncng dirty inodes due to sb_rdonly check, leaving dirty inodes there. To solve this issue, during umount, add remove SB_RDONLY flag in sb->s_flags, to make sure sync_filesystem() will not be skipped. Signed-off-by: -
Yunlei He authored
Now, we depend on fsck to ensure quota file data is ok, so we scan whole partition if checkpoint without umount flag. It's same for quota off error case, which may make quota file data inconsistent. generic/019 reports below error: __quota_error: 1160 callbacks suppressed Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota Quota error (device zram1): write_blk: dquota write failed Quota error (device zram1): qtree_write_dquot: Error -28 occurred while creating quota VFS: Busy inodes after unmount of zram1. Self-destruct in 5 seconds. Have a nice day... If we failed in below path due to fail to write dquot block, we will miss to release quota inode, fix it. - f2fs_put_super - f2fs_quota_off_umount - f2fs_quota_off - f2fs_quota_sync <-- failed - dquot_quota_off <-- missed to call Signed-off-by:
Yunlei He <heyunlei@huawei.com> Signed-off-by:
-
- 07 Sep, 2018 1 commit
-
-
Jaegeuk Kim authored
Sometimes, some merged IOs could get a chance to be submitted, resulting in system hang in shutdown test. This issues IOs all the time after shutdown. Signed-off-by:
-
- 05 Sep, 2018 10 commits
-
-
Jaegeuk Kim authored
1. Create a file in an encrypted directory 2. Do GC & drop caches 3. Read stale data before its bio for metapage was not issued yet Reviewed-by:
-
Chao Yu authored
Don't limit printing log, so that we will not miss any key messages. This reverts commit a36c106d. In addition, we use printk_ratelimited to avoid too many log prints. - error injection - discard submission failure Signed-off-by:
-
Sahitya Tummala authored
When dev is busy, discard thread wake up timeout can be aligned with the exact time that it needs to wait for dev to come out of busy. This helps to avoid unnecessary periodic wakeups and thus save some power. Signed-off-by:
-
Chao Yu authored
https://bugzilla.kernel.org/show_bug.cgi?id=200951 These is a NULL pointer dereference issue reported in bugzilla: Hi, in the setup there is a SATA SSD connected to a SATA-to-USB bridge. The disc is "Samsung SSD 850 PRO 256G" which supports TRIM. There are four partitions: sda1: FAT /boot sda2: F2FS / sda3: F2FS /home sda4: F2FS The bridge is ASMT1153e which uses the "uas" driver. There is no TRIM pass-through, so, when mounting it reports: mounting with "discard" option, but the device does not support discard The USB host is USB3.0 and UASP capable. It is the one on RK3399. Given this everything works fine, except there is no TRIM support. In order to enable TRIM a new UDEV rule is added [1]: /etc/udev/rules.d/10-sata-bridge-trim.rules: ACTION=="add|change", ATTRS{idVendor}=="174c", ATTRS{idProduct}=="55aa", SUBSYSTEM=="scsi_disk", ATTR{provisioning_mode}="unmap" After reboot any F2FS write hangs forever and dmesg reports: Unable to handle kernel NULL pointer dereference Also tested on a x86_64 system: works fine even with TRIM enabled. same disc same bridge different usb host controller different cpu architecture not root filesystem Regards, Vicenç. [1] Post #5 in https://bbs.archlinux.org/viewtopic.php?id=236280 Unable to handle kernel NULL pointer dereference at virtual address 000000000000003e Mem abort info: ESR = 0x96000004 Exception class = DABT (current EL), IL = 32 bits SET = 0, FnV = 0 EA = 0, S1PTW = 0 Data abort info: ISV = 0, ISS = 0x00000004 CM = 0, WnR = 0 user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000626e3122 [000000000000003e] pgd=0000000000000000 Internal error: Oops: 96000004 [#1] SMP Modules linked in: overlay snd_soc_hdmi_codec rc_cec dw_hdmi_i2s_audio dw_hdmi_cec snd_soc_simple_card snd_soc_simple_card_utils snd_soc_rockchip_i2s rockchip_rga snd_soc_rockchip_pcm rockchipdrm videobuf2_dma_sg v4l2_mem2mem rtc_rk808 videobuf2_memops analogix_dp videobuf2_v4l2 videobuf2_common dw_hdmi dw_wdt cec rc_core videodev drm_kms_helper media drm rockchip_thermal rockchip_saradc realtek drm_panel_orientation_quirks syscopyarea sysfillrect sysimgblt fb_sys_fops dwmac_rk stmmac_platform stmmac pwm_bl squashfs loop crypto_user gpio_keys hid_kensington CPU: 5 PID: 957 Comm: nvim Not tainted 4.19.0-rc1-1-ARCH #1 Hardware name: Sapphire-RK3399 Board (DT) pstate: 00000005 (nzcv daif -PAN -UAO) pc : update_sit_entry+0x304/0x4b0 lr : update_sit_entry+0x108/0x4b0 sp : ffff00000ca13bd0 x29: ffff00000ca13bd0 x28: 000000000000003e x27: 0000000000000020 x26: 0000000000080000 x25: 0000000000000048 x24: ffff8000ebb85cf8 x23: 0000000000000253 x22: 00000000ffffffff x21: 00000000000535f2 x20: 00000000ffffffdf x19: ffff8000eb9e6800 x18: ffff8000eb9e6be8 x17: 0000000007ce6926 x16: 000000001c83ffa8 x15: 0000000000000000 x14: ffff8000f602df90 x13: 0000000000000006 x12: 0000000000000040 x11: 0000000000000228 x10: 0000000000000000 x9 : 0000000000000000 x8 : 0000000000000000 x7 : 00000000000535f2 x6 : ffff8000ebff3440 x5 : ffff8000ebff3440 x4 : ffff8000ebe3a6c8 x3 : 00000000ffffffff x2 : 0000000000000020 x1 : 0000000000000000 x0 : ffff8000eb9e5800 Process nvim (pid: 957, stack limit = 0x0000000063a78320) Call trace: update_sit_entry+0x304/0x4b0 f2fs_invalidate_blocks+0x98/0x140 truncate_node+0x90/0x400 f2fs_remove_inode_page+0xe8/0x340 f2fs_evict_inode+0x2b0/0x408 evict+0xe0/0x1e0 iput+0x160/0x260 do_unlinkat+0x214/0x298 __arm64_sys_unlinkat+0x3c/0x68 el0_svc_handler+0x94/0x118 el0_svc+0x8/0xc Code: f9400800 b9488400 36080140 f9400f01 (387c4820) ---[ end trace a0f21a307118c477 ]--- The reason is it is possible to enable discard flag on block queue via UDEV, but during mount, f2fs will initialize se->discard_map only if this flag is set, once the flag is set after mount, f2fs may dereference NULL pointer on se->discard_map. So this patch does below changes to fix this issue: - initialize and update se->discard_map all the time. - don't clear DISCARD option if device has no QUEUE_FLAG_DISCARD flag during mount. - don't issue small discard on zoned block device. - introduce some functions to enhance the readability. Signed-off-by:
Vicente Bergas <vicencb@gmail.com> Signed-off-by:
-
Chengguang Xu authored
Add additinal sanity check for irregular case(e.g. corruption). If size of extended attribution is smaller than size of acl header, then return -EINVAL. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpioLinus Torvalds authored
Pull GPIO fixes from Linus Walleij: "Some GPIO fixes. The ACPI stuff is probably the most annoying for users that get fixed this time. - Atomic contexts, cansleep* calls and such fastpath/slopwpath things. - Defer ACPI event handler registration to late_initcall() so IRQs do not fire in our face before other drivers have a chance to register handlers. - Race condition if a consumer requests a GPIO after gpiochip_add_data_with_key() but before of_gpiochip_add() - Probe errorpath in the dwapb driver" * tag 'gpio-v4.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: gpio: Fix crash due to registration race gpio: dwapb: Fix error handling in dwapb_gpio_probe() gpiolib-acpi: Register GpioInt ACPI event handlers from a late_initcall gpiolib: acpi: Switch to cansleep version of GPIO library call gpio: adp5588: Fix sleep-in-atomic-context bug -
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "A set of very minor fixes and a couple of reverts to fix a major problem (the attempt to change the busy count causes a hang when attempting to change the drive cache type)" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: aacraid: fix a signedness bug Revert "scsi: core: avoid host-wide host_busy counter for scsi_mq" Revert "scsi: core: fix scsi_host_queue_ready" scsi: libata: Add missing newline at end of file scsi: target: iscsi: cxgbit: use pr_debug() instead of pr_info() scsi: hpsa: limit transfer length to 1MB, not 512kB scsi: lpfc: Correct MDS diag and nvmet configuration scsi: lpfc: Default fdmi_on to on scsi: csiostor: fix incorrect port capabilities scsi: csiostor: add a check for NULL pointer after kmalloc() scsi: documentation: add scsi_mod.use_blk_mq to scsi-parameters scsi: core: Update SCSI_MQ_DEFAULT help text to match default
-
Linus Torvalds authored
Merge tag 'nds32-for-linus-4.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux Pull nds32 updates from Greentime Hu: "Contained in here are the bug fixes, building error fixes and ftrace support for nds32" * tag 'nds32-for-linus-4.19-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/greentime/linux: nds32: linker script: GCOV kernel may refers data in __exit nds32: fix build error because of wrong semicolon nds32: Fix a kernel panic issue because of wrong frame pointer access. nds32: Only print one page of stack when die to prevent printing too much information. nds32: Add macro definition for offset of lp register on stack nds32: Remove the deprecated ABI implementation nds32/stack: Get real return address by using ftrace_graph_ret_addr nds32/ftrace: Support dynamic function graph tracer nds32/ftrace: Support dynamic function tracer nds32/ftrace: Add RECORD_MCOUNT support nds32/ftrace: Support static function graph tracer nds32/ftrace: Support static function tracer nds32: Extract the checking and getting pointer to a macro nds32: Clean up the coding style nds32: Fix get_user/put_user macro expand pointer problem nds32: Fix empty call trace nds32: add NULL entry to the end of_device_id array nds32: fix logic for module
-
Greentime Hu authored
This patch is used to fix nds32 allmodconfig/allyesconfig build error because GCOV kernel embeds counters in the kernel for each line and a part of that embed in __exit text. So we need to keep the EXIT_TEXT and EXIT_DATA if CONFIG_GCOV_KERNEL=y. Link: https://lkml.org/lkml/2018/9/1/125Signed-off-by:
Greentime Hu <greentime@andestech.com> Reviewed-by:
Masami Hiramatsu <mhiramat@kernel.org>
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "17 fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: nilfs2: convert to SPDX license tags drivers/dax/device.c: convert variable to vm_fault_t type lib/Kconfig.debug: fix three typos in help text checkpatch: add __ro_after_init to known $Attribute mm: fix BUG_ON() in vmf_insert_pfn_pud() from VM_MIXEDMAP removal uapi/linux/keyctl.h: don't use C++ reserved keyword as a struct member name memory_hotplug: fix kernel_panic on offline page processing checkpatch: add optional static const to blank line declarations test ipc/shm: properly return EIDRM in shm_lock() mm/hugetlb: filter out hugetlb pages if HUGEPAGE migration is not supported. mm/util.c: improve kvfree() kerneldoc tools/vm/page-types.c: fix "defined but not used" warning tools/vm/slabinfo.c: fix sign-compare warning kmemleak: always register debugfs file mm: respect arch_dup_mmap() return value mm, oom: fix missing tlb_finish_mmu() in __oom_reap_task_mm(). mm: memcontrol: print proper OOM header when no eligible victim left
-
- 04 Sep, 2018 6 commits
-
-
Ryusuke Konishi authored
Remove the verbose license text from NILFS2 files and replace them with SPDX tags. This does not change the license of any of the code. Link: http://lkml.kernel.org/r/1535624528-5982-1-git-send-email-konishi.ryusuke@lab.ntt.co.jpSigned-off-by:
Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Reviewed-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Souptick Joarder authored
As part of 226ab561 ("device-dax: Convert to vmf_insert_mixed and vm_fault_t") in 4.19-rc1, 'rc' was not converted to vm_fault_t. Now converted. Link: http://lkml.kernel.org/r/20180830153813.GA26059@jordon-HP-15-Notebook-PCSigned-off-by:
Souptick Joarder <jrdr.linux@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Ross Zwisler <zwisler@kernel.org> Cc: Vishal Verma <vishal.l.verma@intel.com> Cc: Matthew Wilcox <willy@infradead.org> Signed-off-by:
-
Thibaut Sautereau authored
Fix three typos in CONFIG_WARN_ALL_UNSEEDED_RANDOM help text. Link: http://lkml.kernel.org/r/20180830194505.4778-1-thibaut@sautereau.frSigned-off-by:
Thibaut Sautereau <thibaut@sautereau.fr> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Joe Perches authored
__ro_after_init is a specific __attribute__ that checkpatch does currently not understand. Add it to the known $Attribute types so that code that uses variables declared with __ro_after_init are not thought to be a modifier type. This appears as a defect in checkpatch output of code like: static bool trust_cpu __ro_after_init = IS_ENABLED(CONFIG_RANDOM_TRUST_CPU); [...] if (trust_cpu && arch_init) { where checkpatch reports: ERROR: space prohibited after that '&&' (ctx:WxW) if (trust_cpu && arch_init) { Link: http://lkml.kernel.org/r/0fa8a2cb83ade4c525e18261ecf6cfede3015983.camel@perches.comSigned-off-by:Joe Perches <joe@perches.com> Reported-by:
Kees Cook <keescook@chromium.org> Tested-by:
-
Dave Jiang authored
It looks like I missed the PUD path when doing VM_MIXEDMAP removal. This can be triggered by: 1. Boot with memmap=4G!8G 2. build ndctl with destructive flag on 3. make TESTS=device-dax check [ +0.000675] kernel BUG at mm/huge_memory.c:824! Applying the same change that was applied to vmf_insert_pfn_pmd() in the original patch. Link: http://lkml.kernel.org/r/153565957352.35524.1005746906902065126.stgit@djiang5-desk3.ch.intel.com Fixes: e1fb4a08 ("dax: remove VM_MIXEDMAP for fsdax and device dax") Signed-off-by:
Dave Jiang <dave.jiang@intel.com> Reported-by:
Vishal Verma <vishal.l.verma@intel.com> Tested-by:
Jeff Moyer <jmoyer@redhat.com> Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Randy Dunlap authored
Since this header is in "include/uapi/linux/", apparently people want to use it in userspace programs -- even in C++ ones. However, the header uses a C++ reserved keyword ("private"), so change that to "dh_private" instead to allow the header file to be used in C++ userspace. Fixes https://bugzilla.kernel.org/show_bug.cgi?id=191051 Link: http://lkml.kernel.org/r/0db6c314-1ef4-9bfa-1baa-7214dd2ee061@infradead.org Fixes: ddbb4114 ("KEYS: Add KEYCTL_DH_COMPUTE command") Signed-off-by:
-
