- 04 Mar, 2022 12 commits
-
-
Ville Syrjälä authored
We can trivially replace skl_wrpll_context_init() with a single designated initializer. Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220301173128.6988-2-ville.syrjala@linux.intel.comReviewed-by:
Jani Nikula <jani.nikula@intel.com>
-
Ville Syrjälä authored
Move intel_crtc_pch_transcoder() and has_pch_trancoder() to a more appropritate place (intel_pch_display.c). Signed-off-by:
-
Ville Syrjälä authored
Move the ibx pch port sanitation code into intel_pch_display.c where it now belongs. Signed-off-by:
-
Ville Syrjälä authored
Now that we track framestart_delay in the crtc state with readout and state checker support we can remove the explicit framestart_delay sanitation code. Also I'm not convinced reprogramming this while the pipe is running is even valid. CHICKEN_TRANS (hsw+) and TRANS_CHICKEN2 (cpt+) docs at least make no mention of double buffering which seems to imply that live reprogramming is not supported. On older platforms PIPECONF and PCH_TRANSCONF (ibx) are double buffered though, so might be that we could do this on the older platforms. But doesn't really make sense to special case old platforms for this. So from now on if the BIOS has misprogrammed this we shall simply do a full modeset at boot to fix it up. Such systems will of course lose fastboot, but I think less code (and less uncertainty what reprogramming this on a running pipe will even do) outweighs that. Signed-off-by:
-
Ville Syrjälä authored
We need to make framestart_delay dynamic for DRRS on PCH ports. To that end move it into the crtc state. As a bonus we get state check+dump for it. Will also allow us to get rid of the somewhat questionable framestart_delay sanitation code. Signed-off-by:
-
Madhumitha Tolakanahalli Pradeep authored
Changes since v2.14: - Release Notes for v2.15 Fix for corruption issue when DC States are enabled. - Release Notes for v2.16 Fix for cases with flip queue and DC6v are enabled. Signed-off-by:
Madhumitha Tolakanahalli Pradeep <madhumitha.tolakanahalli.pradeep@intel.com> Reviewed-by:
Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220223222801.397632-2-madhumitha.tolakanahalli.pradeep@intel.com
-
Jani Nikula authored
Include linux/highmem.h and linux/swap.h explicitly where needed so we can drop the linux/i2c.h include from i915_drv.h where it pulled in the dependencies implicitly. Signed-off-by:
-
Jani Nikula authored
Allocate the individual intel_gmbus structs dynamically. This lets us hide struct intel_gmbus inside intel_gmbus.c completely. Also use the cleanup function on the error path to avoid duplication. Leave #include <linux/i2c.h> in i915_drv.h for now, as it pulls in a bunch of implicit dependencies. Signed-off-by:
-
Jani Nikula authored
Avoid the additional gmbus lookup on the pin. Signed-off-by:
-
Jani Nikula authored
Avoid separate pin lookups for validity and name. Signed-off-by:
-
Jani Nikula authored
Combine the platform specific if ladders for array lookup and size checks into one. This is cleaner and avoids duplication, but hopefully also helps any static analyzers that seem to have trouble with the bounds checks. Signed-off-by:
-
Tejas Upadhyay authored
Add ADL-N stepping-substepping info in accordance to BSpec. Bspec: 68397 Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com> Reviewed-by:
-
- 03 Mar, 2022 9 commits
-
-
Ville Syrjälä authored
Print the offending plane/crtc id+name in the async flip debugs. Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by:
Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
-
Ville Syrjälä authored
The current implementation of the async flip wm0/ddb optimization does not work at all. The biggest problem is that we skip the whole intel_pipe_update_{start,end}() dance and thus never actually complete the commit that is trying to do the wm/ddb change. To fix this we need to move the do_async_flip flag to the crtc state since we handle commits per-pipe, not per-plane. Also since all planes can now be included in the first/last "async flip" (which gets converted to a sync flip to do the wm/ddb mangling) we need to be more careful when checking if the plane state is async flip comptatible. Only planes doing the async flip should be checked and other planes are perfectly fine not adhereing to any async flip related limitations. However for subsequent commits which are actually going do the async flip in hardware we want to make sure no other planes are in the state. That should never happen assuming we did our job correctly, so we'll toss in a WARN to make sure we catch any bugs here. Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Fixes: c3639f3b ("drm/i915: Use wm0 only during async flips for DG2") Signed-off-by: -
Ville Syrjälä authored
Since the async flip state check is done very late and thus it can see potentially all the planes in the state (due to the wm/ddb optimization) we need to move the "can the requested plane do async flips at all?" check much earlier. For this purpose we introduce intel_async_flip_check_uapi() that gets called early during the atomic check. And for good measure we'll throw in a couple of basic checks: - is the crtc active? - was a modeset flagged? - is+was the plane enabled? Though atm all of those should be guaranteed by the fact that the async flip can only be requested through the legacy page flip ioctl. Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Fixes: c3639f3b ("drm/i915: Use wm0 only during async flips for DG2") Signed-off-by:
-
Ville Syrjälä authored
data_rate==0 no longer means a plane is disabled, it could also mean we want to use the minimum ddb allocation for it. Hence we can't bail out early during ddb allocation or else we'll simply forget to allocate any ddb for such planes. Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Fixes: 6a4d8cc6 ("drm/i915: Don't allocate extra ddb during async flip for DG2") Signed-off-by:
-
Stanislav Lisovskiy authored
Do mapping using CONTIGUOUS flag - otherwise i915_gem_object_is_contiguous warn is triggered. Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20211209141817.16038-1-stanislav.lisovskiy@intel.com
-
José Roberto de Souza authored
Some users are suffering with PSR2 issues that are under debug or issues that were root caused to panel firmware bugs, to make life of those users easier here adding a option to disable PSR2 with kernel parameters so they can still benefit from PSR1 power savings. Using the same enable_psr that is current used to turn the whole feature on or off and allowing user to select up to what PSR version it should enable. Right now users only set this parameter to 0 when they want to disable PSR1 and PSR2 or don't add it at all leaving it to per-chip behavior so it should not cause a bad impact on users. v2: - changing enable_psr values (Ville and Rodrigo) Link: https://gitlab.freedesktop.org/drm/intel/-/issues/4951 Cc: Jouni Högander <jouni.hogander@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Reviewed-by:
Jouni Högander <jouni.hogander@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220224202523.993560-1-jose.souza@intel.com
-
Jouni Högander authored
Currently we are observing occasional screen flickering when PSR2 selective fetch is enabled. More specifically glitch seems to happen on full frame update when cursor moves to coords x = -1 or y = -1. According to Bspec SF Single full frame should not be set if SF Partial Frame Enable is not set. This happened to be true for ADLP as PSR2_MAN_TRK_CTL_ENABLE is always set and for ADL_P it's actually "SF Partial Frame Enable" (Bit 31). Setting "SF Partial Frame Enable" bit also on full update seems to fix screen flickering. Also make code more clear by setting PSR2_MAN_TRK_CTL_ENABLE only if not on ADL_P. Bit 31 has different meaning in ADL_P. Bspec: 49274 v2: Fix Mihai Harpau email address v3: Modify commit message and remove unnecessary comment Tested-by:
Lyude Paul <lyude@redhat.com> Fixes: 7f6002e5 ("drm/i915/display: Enable PSR2 selective fetch by default") Reported-by:
-
Lee Shawn C authored
VBT 249 update to support more TMDS clock rate 3.00G, 3.40G and 5.94G. Refer to this new definition to configure max TMDS clock rate for HDMI driver. BSpec: 20124 v2: new subject Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by:
Lee Shawn C <shawn.c.lee@intel.com> Signed-off-by:
-
Swathi Dhanavanthri authored
This is not supported for ADLP and is not needed. Signed-off-by:
Swathi Dhanavanthri <swathi.dhanavanthri@intel.com> Signed-off-by:
-
- 02 Mar, 2022 6 commits
-
-
Tejas Upadhyay authored
The VT-d spec requires (10.4.4 Global Command Register, TE field) that: Hardware implementations supporting DMA draining must drain any in-flight DMA read/write requests queued within the Root-Complex before completing the translation enable command and reflecting the status of the command through the TES field in the Global Status register. Unfortunately, some integrated graphic devices fail to do so after some kind of power state transition. As the result, the system might stuck in iommu_disable_translati on(), waiting for the completion of TE transition. This adds RPLS to a quirk list for those devices and skips TE disabling if the qurik hits. Link: https://gitlab.freedesktop.org/drm/intel/-/issues/4898Tested-by:
Raviteja Goud Talla <ravitejax.goud.talla@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Acked-by:
Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
-
Lucas De Marchi authored
Remove the local onoff() implementation and adopt the str_on_off() from linux/string_helpers.h. Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by:
-
Lucas De Marchi authored
Remove the local enableddisabled() implementation and adopt the str_enabled_disabled() from linux/string_helpers.h. Signed-off-by:
-
Lucas De Marchi authored
Remove the local enabledisable() implementation and adopt the str_enable_disable() from linux/string_helpers.h. Signed-off-by:
-
Lucas De Marchi authored
Remove the local yesno() implementation and adopt the str_yes_no() from linux/string_helpers.h. Signed-off-by:
-
Rodrigo Vivi authored
To catch up with recent rounds of pull requests and get some drm-misc dependencies so we can merge linux/string_helpers related changes. Signed-off-by:
-
- 01 Mar, 2022 2 commits
-
-
Colin Ian King authored
Don't populate the read-only arrays on the stack but instead make them static const and signed 8 bit ints. Also makes the object code a little smaller. Reformat the statements to clear up checkpatch warning. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Signed-off-by:
-
Dave Airlie authored
Merge tag 'amd-drm-next-5.18-2022-02-25' of https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.18-2022-02-25: amdgpu: - Raven2 suspend/resume fix - SDMA 5.2.6 updates - VCN 3.1.2 updates - SMU 13.0.5 updates - DCN 3.1.5 updates - Virtual display fixes - SMU code cleanup - Harvest fixes - Expose benchmark tests via debugfs - Drop no longer relevant gart aperture tests - More RAS restructuring - W=1 fixes - PSR rework - DP/VGA adapter fixes - DP MST fixes - GPUVM eviction fix - GPU reset debugfs register dumping support - Misc display fixes - SR-IOV fix - Aldebaran mGPU fix - Add module parameter to disable XGMI for testing amdkfd: - IH ring overflow logging fixes - CRIU fixes - Misc fixes Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220225183535.5907-1-alexander.deucher@amd.com
-
- 28 Feb, 2022 11 commits
-
-
Imre Deak authored
Move intel_display_power_well_is_enabled() to intel_power_well.c, as a step towards making the low-level power well internals (i915_power_well_ops/desc structs) hidden. Eventually the call to this function and in general accessing power wells directly from elsewhere in the driver should be replaced by the use of power domains. No functional change. Suggested-by:
Imre Deak <imre.deak@intel.com> Reviewed-by:
-
Imre Deak authored
Add functions to get a power well's actual- and cached-enabled state, name, domain mask and refcount, as a step towards making the low-level power well internals (i915_power_well_ops/desc structs) hidden. No functional change. Suggested-by:
-
Imre Deak authored
Add a function to call a power well's sync_hw() hook, instead of open-coding the same, as a step towards making the low-level power well internals (i915_power_well_ops/desc structs) hidden. The cached-enable state should be always up-to-date, so update it whenever sync_hw() is called. No functional change. Suggested-by:
-
Imre Deak authored
Move the power well get/put/enable/disable hooks to the new intel_display_power_well.c file. The motivation is to reduce the clutter in intel_display_power.c, keeping the functionality related to power domains in that file and moving the low-level power well functionality to intel_display_power_well.c. No functional change. Suggested-by:
-
Imre Deak authored
Move the i915_power_well_regs struct into i915_power_well_ops. Most of the power wells use the same ops/regs combination, so this saves some space and also simplifies the platform power domain->power well definitions. Signed-off-by:
-
Imre Deak authored
Commit d5ce34da ("drm/i915: Add state verification for the TypeC port mode") added a verification to the TypeC AUX power well enable()/disable() hooks to check if the TypeC port related to this power well is properly locked. If the disabling happens asynchronously the verification is skipped, since in this case the port is unlocked. The detection of asnychronous disabling doesn't work as intended though, since the power well's reference count is always 0 when its disable() hook is called (and since there won't be any domain reference held for this power well either, the verification is always skipped); remove the verification from the disable() hook for now. In the power well's enable() hook the power well's reference will be always >0 and there won't be any asynchronous disabling pending for it, so we can drop the async refcount check from there. No functional change. Signed-off-by:
-
Imre Deak authored
Instead of open-coding the call of the power wells' enable()/disable() hooks use the corresponding helper functions. This will also ensure that the power well's cached-enable state is always up-to-date. Luckily the lack of this updating hasn't been a problem, since the state either didn't change (in intel_display_power_set_target_dc_state()), or got updated subsequently (for vlv_cmnlane_wa(), in the following intel_power_domains_sync_hw()). Signed-off-by:
-
Imre Deak authored
The POWER_DOMAIN_TRANSCODER() macro depends on the POWER_DOMAIN_TRANSCODER_A/B .. DSI_A/C enum values to be consecutive, move POWER_DOMAIN_TRANSCODER_VDSC_PW2 after these to ensure this. The wrong order didn't cause a problem, since the DSI_A/C domains are in always-on power wells on all relevant platforms. The same power well ends up being enabled/disabled when the VDSC_PW2 domain is selected incorrectly. While at it add a code comment about enum values that need to stay consecutive. Signed-off-by:
-
Jani Nikula authored
Use REG_FIELD_{PREP,GET} for completeness, and to avoid bitwise operations with different sizes. v2: Also use REG_FIELD_GET in skl_wm_level_from_reg_val() (Ville) Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: -
Dave Airlie authored
This backmerges v5.17-rc6 so I can merge some amdgpu and some tegra changes on top. Signed-off-by: -
Dave Airlie authored
Merge tag 'mediatek-drm-next-5.18' of https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next Mediatek DRM Next for Linux 5.18 1. Transfer display binding document to yaml format. 2. Add mt8195 display device binding. 3. Allow commands to be sent during video mode. 4. Add wait_for_event for crtc disable by cmdq. Signed-off-by:
-
