- 03 Mar, 2016 40 commits
-
-
Adrian Hunter authored
commit 1ca89685 upstream. In some cases, the stronger 33 Ohm driver strength must not be used so it is not a suitable default. Change it to the standard default 50 Ohm value. The patch applies to v4.2+ except the file name changed. It is drivers/mmc/host/sdhci-pci.c prior to v.4.4. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Rabin Vincent authored
commit 05caee93 upstream. Commit bb08a7d4 ("mmc: usdhi6rol0: fix NULL pointer deref in debug print") fixed one NULL pointer dereference but unfortunately introduced another. "data" may be NULL if this is a command timeout for a command without any data, so we should only use it if we're actually waiting for data. Fixes: bb08a7d4 ("mmc: usdhi6rol0: fix NULL pointer deref in debug print") Signed-off-by:
Rabin Vincent <rabin.vincent@axis.com> Signed-off-by:
-
Alexandre Belloni authored
commit f02b4b72 upstream. clockevents_exchange_device is calling clockevents_shutdown() on the new clockenvents device but it may have never been enabled in the first place. This results in the tcb clock being disabled without being enabled first: ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at drivers/clk/clk.c:680 clk_disable+0x28/0x34() Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.4.0+ #6 Hardware name: Atmel AT91SAM9 [<c000f2b8>] (unwind_backtrace) from [<c000d01c>] (show_stack+0x10/0x14) [<c000d01c>] (show_stack) from [<c00172f0>] (warn_slowpath_common+0x78/0xa0) [<c00172f0>] (warn_slowpath_common) from [<c00173a8>] (warn_slowpath_null+0x18/0x20) [<c00173a8>] (warn_slowpath_null) from [<c0361528>] (clk_disable+0x28/0x34) [<c0361528>] (clk_disable) from [<c034d560>] (tc_shutdown+0x38/0x4c) [<c034d560>] (tc_shutdown) from [<c0059ad4>] (clockevents_switch_state+0x38/0x6c) [<c0059ad4>] (clockevents_switch_state) from [<c0059b18>] (clockevents_shutdown+0x10/0x24) [<c0059b18>] (clockevents_shutdown) from [<c005a458>] (tick_check_new_device+0x84/0xac) [<c005a458>] (tick_check_new_device) from [<c0059660>] (clockevents_register_device+0x7c/0x108) [<c0059660>] (clockevents_register_device) from [<c06b5a68>] (tcb_clksrc_init+0x390/0x3e8) [<c06b5a68>] (tcb_clksrc_init) from [<c00097cc>] (do_one_initcall+0x114/0x1d4) [<c00097cc>] (do_one_initcall) from [<c069bd54>] (kernel_init_freeable+0xfc/0x1b8) [<c069bd54>] (kernel_init_freeable) from [<c04c3818>] (kernel_init+0x8/0xe0) [<c04c3818>] (kernel_init) from [<c000a410>] (ret_from_fork+0x14/0x24) ---[ end trace 0000000000000001 ]--- Check what state we were in before trying to disable the clock. Fixes: cf4541c1 ("clockevents/drivers/tcb_clksrc: Migrate to new 'set-state' interface") Signed-off-by:
Alexandre Belloni <alexandre.belloni@free-electrons.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Daniel Lezcano <daniel.lezcano@linaro.org> Link: http://lkml.kernel.org/r/1452854061-30370-1-git-send-email-alexandre.belloni@free-electrons.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Richard Cochran authored
commit 1b9f2372 upstream. The posix_clock_poll function is supposed to return a bit mask of POLLxxx values. However, in case the hardware has disappeared (due to hot plugging for example) this code returns -ENODEV in a futile attempt to throw an error at the file descriptor level. The kernel's file_operations interface does not accept such error codes from the poll method. Instead, this function aught to return POLLERR. The value -ENODEV does, in fact, contain the POLLERR bit (and almost all the other POLLxxx bits as well), but only by chance. This patch fixes code to return a proper bit mask. Credit goes to Markus Elfring for pointing out the suspicious signed/unsigned mismatch. Reported-by:
Markus Elfring <elfring@users.sourceforge.net> igned-off-by:
Richard Cochran <richardcochran@gmail.com> Cc: John Stultz <john.stultz@linaro.org> Cc: Julia Lawall <julia.lawall@lip6.fr> Link: http://lkml.kernel.org/r/1450819198-17420-1-git-send-email-richardcochran@gmail.comSigned-off-by:
-
Ashok Kumar authored
commit 004fa08d upstream. When the GIC is using EOImode==1, the EOI is done immediately, leaving the deactivation to be performed when the EOI was previously done. Unfortunately, the ITS is not aware of the EOImode at all, and blindly EOIs the interrupt again. On most systems, this is ignored (despite being a programming error), but some others do raise a SError exception as there is no priority drop to perform for this interrupt. The fix is to stop trying to be clever, and always call into the underlying GIC to perform the right access, irrespective of the more we're in. [Marc: Reworked commit message] Fixes: 0b996fd3 ("irqchip/GICv3: Convert to EOImode == 1") Acked-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Ashok Kumar <ashoks@broadcom.com> Signed-off-by:
-
Milo Kim authored
commit 49f34134 upstream. Atmel AIC has common structure for SMR (Source Mode Register). bit[6:5] Interrupt source type bit[2:0] Priority level Other bits are unused. To update new priority value, bit[2:0] should be cleared first and then new priority level can be written. However, aic_common_set_priority() helper clears source type bits instead of priority bits. This patch fixes wrong mask bit operation. Fixes: b1479ebb "irqchip: atmel-aic: Add atmel AIC/AIC5 drivers" Signed-off-by:
Milo Kim <milo.kim@ti.com> Acked-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: Nicholas Ferre <nicolas.ferre@atmel.com> Link: http://lkml.kernel.org/r/1452669592-3401-2-git-send-email-milo.kim@ti.comSigned-off-by:
-
Oleksij Rempel authored
commit c5b63520 upstream. The rework of the driver missed to move the call to set_handle_irq() into asm9260_of_init(). As a consequence no interrupt entry point is installed and no interrupts are delivered Solution is simple: Install the interrupt entry handler. Fixes: 7e4ac676 ("irqchip/mxs: Add Alphascale ASM9260 support") Signed-off-by:
Oleksij Rempel <linux@rempel-privat.de> Cc: kernel@pengutronix.de Cc: jason@lakedaemon.net Cc: marc.zyngier@arm.com Link: http://lkml.kernel.org/r/1454061473-24957-1-git-send-email-linux@rempel-privat.deSigned-off-by:
-
Sekhar Nori authored
commit d3b421cd upstream. Under some conditions, irq sorting procedure used by INTC can go wrong resulting in a spurious irq getting reported. If this condition is not handled, it results in endless stream of: unexpected IRQ trap at vector 00 messages from ack_bad_irq() Handle the spurious interrupt condition in omap-intc driver to prevent this. Measurements using kernel function profiler on AM335x EVM running at 720MHz show that after this patch omap_intc_handle_irq() takes about 37.4us against 34us before this patch. Signed-off-by:
Sekhar Nori <nsekhar@ti.com> Acked-by:
Tony Lindgren <tony@atomide.com> Cc: John Ogness <john.ogness@linutronix.de> Cc: Felipe Balbi <balbi@ti.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Link: http://lkml.kernel.org/r/9c78a6db02ac55f7af7371b417b6e414d2c3095b.1450188128.git.nsekhar@ti.comSigned-off-by:
-
Mathieu Poirier authored
commit fadf3a44 upstream. Connection child names associated to ports can sometimes be NULL, which is the case when booting a system on QEMU or when the Coresight power domain isn't switched on. This patch is adding a check to make sure a NULL string isn't fed to strcmp(), something that avoid crashing the system. Reported-by:
Tyler Baker <tyler.baker@linaro.org> Signed-off-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Signed-off-by:
-
Mike Snitzer authored
commit 4328daa2 upstream. Using request-based DM mpath configured with the following stacking (.request_fn DM mpath ontop of scsi-mq paths): echo Y > /sys/module/scsi_mod/parameters/use_blk_mq echo N > /sys/module/dm_mod/parameters/use_blk_mq 'struct dm_rq_target_io' would leak if a request is requeued before a blk-mq clone is allocated (or fails to allocate). free_rq_tio() wasn't being called. kmemleak reported: unreferenced object 0xffff8800b90b98c0 (size 112): comm "kworker/7:1H", pid 5692, jiffies 4295056109 (age 78.589s) hex dump (first 32 bytes): 00 d0 5c 2c 03 88 ff ff 40 00 bf 01 00 c9 ff ff ..\,....@....... e0 d9 b1 34 00 88 ff ff 00 00 00 00 00 00 00 00 ...4............ backtrace: [<ffffffff81672b6e>] kmemleak_alloc+0x4e/0xb0 [<ffffffff811dbb63>] kmem_cache_alloc+0xc3/0x1e0 [<ffffffff8117eae5>] mempool_alloc_slab+0x15/0x20 [<ffffffff8117ec1e>] mempool_alloc+0x6e/0x170 [<ffffffffa00029ac>] dm_old_prep_fn+0x3c/0x180 [dm_mod] [<ffffffff812fbd78>] blk_peek_request+0x168/0x290 [<ffffffffa0003e62>] dm_request_fn+0xb2/0x1b0 [dm_mod] [<ffffffff812f66e3>] __blk_run_queue+0x33/0x40 [<ffffffff812f9585>] blk_delay_work+0x25/0x40 [<ffffffff81096fff>] process_one_work+0x14f/0x3d0 [<ffffffff81097715>] worker_thread+0x125/0x4b0 [<ffffffff8109ce88>] kthread+0xd8/0xf0 [<ffffffff8167cb8f>] ret_from_fork+0x3f/0x70 [<ffffffffffffffff>] 0xffffffffffffffff crash> struct -o dm_rq_target_io struct dm_rq_target_io { ... } SIZE: 112 Fixes: e5863d9a ("dm: allocate requests in target when stacking on blk-mq devices") Signed-off-by:
Mike Snitzer <snitzer@redhat.com> Signed-off-by:
-
Mikulas Patocka authored
commit 385277bf upstream. When there is an error copying a chunk dm-snapshot can incorrectly hold associated bios indefinitely, resulting in hung IO. The function copy_callback sets pe->error if there was error copying the chunk, and then calls complete_exception. complete_exception calls pending_complete on error, otherwise it calls commit_exception with commit_callback (and commit_callback calls complete_exception). The persistent exception store (dm-snap-persistent.c) assumes that calls to prepare_exception and commit_exception are paired. persistent_prepare_exception increases ps->pending_count and persistent_commit_exception decreases it. If there is a copy error, persistent_prepare_exception is called but persistent_commit_exception is not. This results in the variable ps->pending_count never returning to zero and that causes some pending exceptions (and their associated bios) to be held forever. Fix this by unconditionally calling commit_exception regardless of whether the copy was successful. A new "valid" parameter is added to commit_exception -- when the copy fails this parameter is set to zero so that the chunk that failed to copy (and all following chunks) is not recorded in the snapshot store. Also, remove commit_callback now that it is merely a wrapper around pending_complete. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
-
Mike Snitzer authored
commit 51216778 upstream. Remove the unused struct block_op pointer that was inadvertantly introduced, via cut-and-paste of previous brb_op() code, as part of commit 50dd842a. (Cc'ing stable@ because commit 50dd842a did) Fixes: 50dd842a ("dm space map metadata: fix ref counting bug when bootstrapping a new space map") Reported-by:
David Binderman <dcb314@hotmail.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
commit e8beb023 upstream. The tda1004x was updating the properties cache before locking. If the device is not locked, the data at the registers are just random values with no real meaning. This caused the driver to fail with libdvbv5, as such library calls GET_PROPERTY from time to time, in order to return the DVB stats. Tested with a saa7134 card 78: ASUSTeK P7131 Dual, vendor PCI ID: 1043:4862 Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Hans Verkuil authored
commit 4623e596 upstream. In the 3.17 kernel the poll() behavior changed for output streams: as long as not all buffers were queued up poll() would return that userspace can write. This is fine for the write() call, but when using stream I/O this changed the behavior since the expectation was that it would wait for buffers to become available for dequeuing. This patch only enables the check whether you can queue buffers for file I/O only, and skips it for stream I/O. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Antonio Ospite authored
commit dcc7fdbe upstream. v4l2-compliance sends a zeroed struct v4l2_streamparm in v4l2-test-formats.cpp::testParmType(), and this results in a division by 0 in some gspca subdrivers: divide error: 0000 [#1] SMP Modules linked in: gspca_ov534 gspca_main ... CPU: 0 PID: 17201 Comm: v4l2-compliance Not tainted 4.3.0-rc2-ao2 #1 Hardware name: System manufacturer System Product Name/M2N-E SLI, BIOS ASUS M2N-E SLI ACPI BIOS Revision 1301 09/16/2010 task: ffff8800818306c0 ti: ffff880095c4c000 task.ti: ffff880095c4c000 RIP: 0010:[<ffffffffa079bd62>] [<ffffffffa079bd62>] sd_set_streamparm+0x12/0x60 [gspca_ov534] RSP: 0018:ffff880095c4fce8 EFLAGS: 00010296 RAX: 0000000000000000 RBX: ffff8800c9522000 RCX: ffffffffa077a140 RDX: 0000000000000000 RSI: ffff880095e0c100 RDI: ffff8800c9522000 RBP: ffff880095e0c100 R08: ffffffffa077a100 R09: 00000000000000cc R10: ffff880067ec7740 R11: 0000000000000016 R12: ffffffffa07bb400 R13: 0000000000000000 R14: ffff880081b6a800 R15: 0000000000000000 FS: 00007fda0de78740(0000) GS:ffff88012fc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000014630f8 CR3: 00000000cf349000 CR4: 00000000000006f0 Stack: ffffffffa07a6431 ffff8800c9522000 ffffffffa077656e 00000000c0cc5616 ffff8800c9522000 ffffffffa07a5e20 ffff880095e0c100 0000000000000000 ffff880067ec7740 ffffffffa077a140 ffff880067ec7740 0000000000000016 Call Trace: [<ffffffffa07a6431>] ? v4l_s_parm+0x21/0x50 [videodev] [<ffffffffa077656e>] ? vidioc_s_parm+0x4e/0x60 [gspca_main] [<ffffffffa07a5e20>] ? __video_do_ioctl+0x280/0x2f0 [videodev] [<ffffffffa07a5ba0>] ? video_ioctl2+0x20/0x20 [videodev] [<ffffffffa07a59b9>] ? video_usercopy+0x319/0x4e0 [videodev] [<ffffffff81182dc1>] ? page_add_new_anon_rmap+0x71/0xa0 [<ffffffff811afb92>] ? mem_cgroup_commit_charge+0x52/0x90 [<ffffffff81179b18>] ? handle_mm_fault+0xc18/0x1680 [<ffffffffa07a15cc>] ? v4l2_ioctl+0xac/0xd0 [videodev] [<ffffffff811c846f>] ? do_vfs_ioctl+0x28f/0x480 [<ffffffff811c86d4>] ? SyS_ioctl+0x74/0x80 [<ffffffff8154a8b6>] ? entry_SYSCALL_64_fastpath+0x16/0x75 Code: c7 93 d9 79 a0 5b 5d e9 f1 f3 9a e0 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 53 31 d2 48 89 fb 48 83 ec 08 8b 46 10 <f7> 76 0c 80 bf ac 0c 00 00 00 88 87 4e 0e 00 00 74 09 80 bf 4f RIP [<ffffffffa079bd62>] sd_set_streamparm+0x12/0x60 [gspca_ov534] RSP <ffff880095c4fce8> ---[ end trace 279710c2c6c72080 ]--- Following what the doc says about a zeroed timeperframe (see http://www.linuxtv.org/downloads/v4l-dvb-apis/vidioc-g-parm.html): ... To reset manually applications can just set this field to zero. fix the issue by resetting the frame rate to a default value in case of an unusable timeperframe. The fix is done in the subdrivers instead of gspca.c because only the subdrivers have notion of a default frame rate to reset the camera to. Signed-off-by:
Antonio Ospite <ao2@ao2.it> Reviewed-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Laura Abbott authored
commit d2cc2f0b upstream. A previous patch added a check if the firmware is too big, but it didn't set the return error code with the right value. [mchehab@osg.samsung.com: I ended by applying a v1 of Laura's patch, without the proper return code. This patch contains the difference between v2 and v1 of the Laura's "si2157: Bounds check firmware" patch] Signed-off-by:
Laura Abbott <labbott@fedoraproject.org> Reviewed-by:
Olli Salonen <olli.salonen@iki.fi> Tested-by:
-
Malcolm Priestley authored
commit c9d57de6 upstream. When in FE_TUNE_MODE_ONESHOT the frontend must report the actual capabilities so user can take appropriate action. With frontends that can't do auto inversion this is done by dvb-core automatically so CAN_INVERSION_AUTO is valid. However, when in FE_TUNE_MODE_ONESHOT this is not true. So only set FE_CAN_INVERSION_AUTO in modes other than FE_TUNE_MODE_ONESHOT Signed-off-by:
Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by:
-
Chen-Yu Tsai authored
commit 768acf46 upstream. The driver allocates the spinlock but fails to initialize it correctly. The kernel reports a BUG indicating bad spinlock magic when spinlock debugging is enabled. Call spin_lock_init() on it to initialize it correctly. Fixes: b4e3e59f ("[media] rc: add sunxi-ir driver") Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Acked-by:
-
Al Viro authored
commit d4565649 upstream. both do_last() and walk_component() risk picking a NULL inode out of dentry about to become positive, *then* checking its flags and seeing that it's not negative anymore and using (already stale by then) value they'd fetched earlier. Usually ends up oopsing soon after that... Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Alexander Usyskin authored
commit 7326fffb upstream. This patch address a possible security issue: The request field in client notify request ioctl comes from user space as u32 and is downcasted to u8 with out validation. Check request field to have approved values MEI_HBM_NOTIFICATION_STAR/STOP Signed-off-by:
Alexander Usyskin <alexander.usyskin@intel.com> Signed-off-by:
Tomas Winkler <tomas.winkler@intel.com> Signed-off-by:
-
Tomas Winkler authored
commit ed6dc538 upstream. fasync should return a negative value on error and not poll mask POLLERR. Cc: Al Viro <viro@ZenIV.linux.org.uk> Reported-by:
-
Larry Finger authored
commit 7079604d upstream. This driver has a number of errors in the module initialization. These include the following: Parameter msi_support is stored in two places - one is removed. Paramters sw_crypto and disable_watchdog were never stored in the final locations, nor were they initialized properly. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Larry Finger authored
commit 06f34572 upstream. In this driver, parameters disable_watchdog and sw_crypto are never copied into the locations used in the main code. While modifying the parameter handling, the copying of parameter msi_support is moved to be with the rest. Signed-off-by:
-
Larry Finger authored
commit 7503efbd upstream. Two of the module parameter descriptions show incorrect default values. In addition the value for software encryption is not transferred to the locations used by the driver. Signed-off-by:
-
Larry Finger authored
commit 793b0999 upstream. This driver has some errors in the handling of module parameters. These include missing initialization for parameters msi_support and disable_watchdog. In addition, neither of these parameters nor sw_crypto are transferred into the locations used by the driver. A final fix is adding parameter msi to the module named and description macros. Signed-off-by:
-
Larry Finger authored
commit d4d60b4c upstream. Two of the module parameters are listed with incorrect default values. Signed-off-by:
-
Larry Finger authored
commit b24f19f1 upstream. The module parameter for software encryption was never transferred to the location used by the driver. Signed-off-by:
-
Larry Finger authored
commit b68d0ae7 upstream. This driver fails to copy the module parameter for software encryption to the locations used by the main code. Signed-off-by:
-
Larry Finger authored
commit f99551a2 upstream. In commit 38506ece (rtlwifi: rtl_pci: Start modification for new drivers), a bug was introduced that causes a NULL pointer dereference. As this bug only affects the infrequently used RTL8192EE and only under low-memory conditions, it has taken a long time for the bug to show up. The bug was reported on the linux-wireless mailing list and also at https://bugs.launchpad.net/ubuntu/+source/ubuntu-release-upgrader/ as bug #1527603 (kernel crashes due to rtl8192ee driver on ubuntu 15.10). Fixes: 38506ece ("rtlwifi: rtl_pci: Start modification for new drivers") Signed-off-by:
-
Jeff Layton authored
commit 7f3697e2 upstream. Dmitry reported that he was able to reproduce the WARN_ON_ONCE that fires in locks_free_lock_context when the flc_posix list isn't empty. The problem turns out to be that we're basically rebuilding the file_lock from scratch in fcntl_setlk when we discover that the setlk has raced with a close. If the l_whence field is SEEK_CUR or SEEK_END, then we may end up with fl_start and fl_end values that differ from when the lock was initially set, if the file position or length of the file has changed in the interim. Fix this by just reusing the same lock request structure, and simply override fl_type value with F_UNLCK as appropriate. That ensures that we really are unlocking the lock that was initially set. While we're there, make sure that we do pop a WARN_ON_ONCE if the removal ever fails. Also return -EBADF in this event, since that's what we would have returned if the close had happened earlier. Cc: Alexander Viro <viro@zeniv.linux.org.uk> Fixes: c293621b (stale POSIX lock handling) Reported-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Jeff Layton <jeff.layton@primarydata.com> Acked-by:
"J. Bruce Fields" <bfields@fieldses.org> Signed-off-by:
-
Vegard Nossum authored
commit a7df4716 upstream. Similarly to commit fb1770aa, with gcc 5 on Ubuntu and CONFIG_STATIC_LINK=y I was seeing these linker errors: /usr/lib/gcc/x86_64-linux-gnu/5/../../../x86_64-linux-gnu/librt.a(timer_create.o): In function `__timer_create_new': (.text+0xcd): undefined reference to `pthread_once' /usr/lib/gcc/x86_64-linux-gnu/5/../../../x86_64-linux-gnu/librt.a(timer_create.o): In function `__timer_create_new': (.text+0x126): undefined reference to `pthread_attr_init' /usr/lib/gcc/x86_64-linux-gnu/5/../../../x86_64-linux-gnu/librt.a(timer_create.o): In function `__timer_create_new': (.text+0x168): undefined reference to `pthread_attr_setdetachstate' [...] Obviously we also need -lpthread for librt.a. Signed-off-by:
Vegard Nossum <vegard.nossum@oracle.com> Signed-off-by:
Richard Weinberger <richard@nod.at> Signed-off-by:
-
Vegard Nossum authored
commit 9f2dfda2 upstream. An inverted return value check in hostfs_mknod() caused the function to return success after handling it as an error (and cleaning up). It resulted in the following segfault when trying to bind() a named unix socket: Pid: 198, comm: a.out Not tainted 4.4.0-rc4 RIP: 0033:[<0000000061077df6>] RSP: 00000000daae5d60 EFLAGS: 00010202 RAX: 0000000000000000 RBX: 000000006092a460 RCX: 00000000dfc54208 RDX: 0000000061073ef1 RSI: 0000000000000070 RDI: 00000000e027d600 RBP: 00000000daae5de0 R08: 00000000da980ac0 R09: 0000000000000000 R10: 0000000000000003 R11: 00007fb1ae08f72a R12: 0000000000000000 R13: 000000006092a460 R14: 00000000daaa97c0 R15: 00000000daaa9a88 Kernel panic - not syncing: Kernel mode fault at addr 0x40, ip 0x61077df6 CPU: 0 PID: 198 Comm: a.out Not tainted 4.4.0-rc4 #1 Stack: e027d620 dfc54208 0000006f da981398 61bee000 0000c1ed daae5de0 0000006e e027d620 dfcd4208 00000005 6092a460 Call Trace: [<60dedc67>] SyS_bind+0xf7/0x110 [<600587be>] handle_syscall+0x7e/0x80 [<60066ad7>] userspace+0x3e7/0x4e0 [<6006321f>] ? save_registers+0x1f/0x40 [<6006c88e>] ? arch_prctl+0x1be/0x1f0 [<60054985>] fork_handler+0x85/0x90 Let's also get rid of the "cosmic ray protection" while we're at it. Fixes: e9193059 "hostfs: fix races in dentry_name() and inode_name()" Signed-off-by:
-
Vegard Nossum authored
commit 0754fb29 upstream. I was seeing some really weird behaviour where piping UML's output somewhere would cause output to get duplicated: $ ./vmlinux | head -n 40 Checking that ptrace can change system call numbers...Core dump limits : soft - 0 hard - NONE OK Checking syscall emulation patch for ptrace...Core dump limits : soft - 0 hard - NONE OK Checking advanced syscall emulation patch for ptrace...Core dump limits : soft - 0 hard - NONE OK Core dump limits : soft - 0 hard - NONE This is because these tests do a fork() which duplicates the non-empty stdout buffer, then glibc flushes the duplicated buffer as each child exits. A simple workaround is to flush before forking. Signed-off-by:
-
Martin Schwidefsky authored
commit 1b17cb79 upstream. git commit 904818e2 "s390/kernel: introduce fpu-internal.h with fpu helper functions" introduced the fpregs_store / fp_regs_load helper. These function fail to save and restore the floating pointer control registers. The effect is that the FPC is not correctly handled on signal delivery and signal return. Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Martin Schwidefsky authored
commit 342300cc upstream. git commit 80703617 "s390: add support for vector extension" broke 31-bit compat processes in regard to signal handling. The restore_sigregs_ext32() function is used to restore the additional elements from the user space signal frame. Among the additional elements are the upper registers halves for 64-bit register support for 31-bit processes. The copy_from_user that is used to retrieve the high-gprs array from the user stack uses an incorrect length, 8 bytes instead of 64 bytes. This causes incorrect upper register halves to get loaded. Signed-off-by:
-
Stefan Haberland authored
commit 12d319b9 upstream. Commit ca369d51 ("sd: Fix device-imposed transfer length limits") introduced a new queue limit max_dev_sectors which limits the maximum sectors for requests. The default value leads to small dasd requests and therefor to a performance drop. Set the max_dev_sectors value to the same value as the max_hw_sectors to use the maximum available request size for DASD devices. Signed-off-by:
Stefan Haberland <sth@linux.vnet.ibm.com> Signed-off-by:
-
Stefan Haberland authored
commit 9d862aba upstream. Add refcount to the DASD device when a summary unit check worker is scheduled. This prevents that the device is set offline with worker in place. Signed-off-by:
Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by:
-
Stefan Haberland authored
commit 020bf042 upstream. The channel checks the specified length and the provided amount of data for CCWs and provides an incorrect length error if the size does not match. Under z/VM with simulation activated the length may get changed. Having the suppress length indication bit set is stated as good CCW coding practice and avoids errors under z/VM. Signed-off-by:
-
Ard Biesheuvel authored
commit bcb7825a upstream. The normalization pass in the sorting routine of the relative exception table serves two purposes: - it ensures that the address fields of the exception table entries are fully ordered, so that no ambiguities arise between entries with identical instruction offsets (i.e., when two instructions that are exactly 8 bytes apart each have an exception table entry associated with them) - it ensures that the offsets of both the instruction and the fixup fields of each entry are relative to their final location after sorting. Commit eb608fb3 ("s390/exceptions: switch to relative exception table entries") ported the relative exception table format from x86, but modified the sorting routine to only normalize the instruction offset field and not the fixup offset field. The result is that the fixup offset of each entry will be relative to the original location of the entry before sorting, likely leading to crashes when those entries are dereferenced. Fixes: eb608fb3 ("s390/exceptions: switch to relative exception table entries") Signed-off-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by:
-
Sebastian Andrzej Siewior authored
commit 546bed63 upstream. I managed to trigger this: | INFO: trying to register non-static key. | the code is fine but needs lockdep annotation. | turning off the locking correctness validator. | CPU: 1 PID: 781 Comm: systemd-gpt-aut Not tainted 4.4.0-rt2+ #14 | Hardware name: ARM-Versatile Express | [<80307cec>] (dump_stack) | [<80070e98>] (__lock_acquire) | [<8007184c>] (lock_acquire) | [<80287800>] (btrfs_ioctl) | [<8012a8d4>] (do_vfs_ioctl) | [<8012ac14>] (SyS_ioctl) so I think that btrfs_device_data_ordered_init() is not invoked behind a macro somewhere. Fixes: 7cc8e58d ("Btrfs: fix unprotected device's variants on 32bits machine") Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
