Merge tag 'omap-for-v4.6/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/defconfig

Merge "omap defconfig changes for v4.6 merge window" from Tony Lindgren:

Defconfig changes for omap2plus_defconfig and multi_v7_defconfig
for v4.6 merge window:

- Enable IOMMU and omap3isp so we can enable TVP5150/1 video
  decoder

- Enable at24 eeprom for revision detection on beagle-x15

- Enable LP872x regulator for both omap2plus_defconfig and
  multi_v7_defconfig as it's needed at least by LG Optimus
  Black

* tag 'omap-for-v4.6/defconfig-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: multi_v7_defconfig: Enable LP872x regulator support
  ARM: omap2plus_defconfig: Enable LP872x regulator support
  ARM: omap2plus_defconfig: Enable AT24 eeprom
  ARM: omap2plus_defconfig: Enable TI TVP5150 video decoder support
  ARM: omap2plus_defconfig: Enable ISP support and dependencies
  ARM: omap2plus_defconfig: Enable OMAP IOMMU support

Merge tag 'imx-defconfig-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/defconfig

Merge "i.MX defconfig update for 4.6" from Shawn Guo:

- Enable i.MX25 Touchscreen controller and ADC support
- Enable NVMEM OCOTP driver support
- Clean up mxs_defconfig and imx_v4_v5_defconfig
- Enable initramfs support
- Enable PSCI, SAHARA and more Vybrid driver support

* tag 'imx-defconfig-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: imx_v4_v5_defconfig: Enable initramfs support
  ARM: imx_v4_v5_defconfig: Cleanup imx_v4_v5_defconfig
  ARM: mxs_defconfig: Enable initramfs support
  ARM: mxs_defconfig: Cleanup mxs_defconfig
  ARM: imx_v6_v7_defconfig: enable useful configurations for Vybrid
  ARM: imx_v6_v7_defconfig: Select CONFIG_CRYPTO_DEV_SAHARA
  ARM: imx_v4_v5_defconfig: Add I.MX25 Touchscreen controller and ADC support.
  ARM: mxs_defconfig: Select CONFIG_NVMEM_MXS_OCOTP
  ARM: imx_v6_v7_defconfig: Select CONFIG_NVMEM_IMX_OCOTP
  ARM: imx_v6_v7_defconfig: enable psci default

This makes it possible to automatically boot-test this defconfig with
kernelci.org.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Regenerate imx_v4_v5_defconfig by running:
make imx_v4_v5_defconfig
- Manually disable EXT2_FS and EXT3_FS
make savedefconfig
mv defconfig arch/arm/configs/imx_v4_v5_defconfig
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Merge tag 'sunxi-defconfig-for-4.6' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into next/defconfig

Merge "Allwinner defconfig changes for 4.6" from Maxime Ripard:

A bunch of changes to add new drivers to the sunxi and multi_v7 defconfigs,
most notably the USB OTG that is finally enabled.

* tag 'sunxi-defconfig-for-4.6' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
  ARM: sunxi_defconfig: Enable MUSB HDRC driver with Allwinner glue
  ARM: multi_v7_defconfig: Enable A10 audio codec driver as module
  ARM: multi_v7_defconfig: Enable MUSB HDRC driver with Allwinner glue
  ARM: sunxi_defconfig: Enable INPUT_EVDEV so axp20x-pek can be used
  ARM: sunxi_defconfig: Enable A10 audio codec driver
  ARM: sunxi_defconfig: Enable sunxi IR driver

Merge "mvebu defconfig for 4.6 (part 2)" from Gregory CLEMENT:

enable SRAM support in mvebu_v7_defconfig

* tag 'mvebu-defconfig-4.6-2' of git://git.infradead.org/linux-mvebu:
  ARM: mvebu: enable SRAM support in mvebu_v7_defconfig

The LP872x regulator is used in the LG Optimus Black codename sniper to supply
the external mmc card.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The LP872x regulator is used in the LG Optimus Black codename sniper to supply
the external mmc card.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This makes it possible to automatically boot-test this defconfig with
kernelci.org.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Regenerate mxs_defconfig by running:
make mxs_defconfig
- Manually disable EXT2_FS and EXT3_FS
make savedefconfig
mv defconfig arch/arm/configs/mxs_defconfig
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Merge "Broadcom defconfig changes for 4.6" from Florian Fainelli:

This pull request contains defconfig changes for Broadcom ARM-based SoCs:

- Daniel enables all that is required to get the BCM283x (Raspberry Pi and
  Raspberry Pi 2) SoCs to boot with multi_v7_defconfig

- Stefan enables the Raspberry Pi firmware driver and power domain drivers
  in bcm2835_defconfig

- Stephen refreshes the bcm2835_defconfig, disables DEBUG_LL, and turns on
  ARMv7 support which is needed for BCM2836 (Raspberry Pi 2)

* tag 'arm-soc/for-4.6/defconfig' of http://github.com/Broadcom/stblinux:
  ARM: multi_v7_defconfig: Enable BCM283x
  ARM: bcm2835_defconfig: Enable RPi power domain driver
  ARM: bcm2835_defconfig: Enable RPi firmware driver
  ARM: bcm2835_defconfig: enable ARMv7 support
  ARM: bcm2835_defconfig: disable DEBUG_LL
  ARM: bcm2835_defconfig: rebuild on next-20160205

This makes it possible to automatically boot-test this defconfig with
kernelci.org.
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Regenerate multi_v5_defconfig by running:
make multi_v5_defconfig
make savedefconfig
mv defconfig arch/arm/configs/multi_v5_defconfig
Signed-off-by: Jan Luebbe <jlu@pengutronix.de>
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Enable configuration options useful for Vybrid:
- NFC NAND driver
- USB dual-role controller (and Chipidea Gadget support)
- Built-in EDMA DMA driver (to be available at LPUART probe)
- Vybrid ADC driver
- IIO hwmon support (used in i.MX 23/28, patch pending for Vybrid)
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'socfpga_defconfig_for_v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into next/defconfig

SoCFPGA defconfig update for v4.6
-Enable initrd/initramfs support

* tag 'socfpga_defconfig_for_v4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
  ARM: socfpga_defconfig: enable support for initramfs/initrd support
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'at91-ab-4.6-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/defconfig

defconfig update for 4.6:
 - Addition of sama5d2 ADC to sama5_defconfig

* tag 'at91-ab-4.6-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
  ARM: at91/defconfig: add sama5d2 adc support in sama5_defconfig
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'samsung-defconfig-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into next/defconfig

Defconfig (exynos and multi_v7) changes for Exynos based boards for v4.6:
1. exynos defconfig:
   a. Enable NEON and accelerated crypto,
   b. Enable s5p-secss driver (Security SubSystem block for accelerating
      some cryptographic operations),
2. exynos and multi_v7: Remove MAX77802 RTC Kconfig because the driver
   was combined into existing rtc-max77686 driver. This depends on changes
   from RTC tree.

* tag 'samsung-defconfig-4.6' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
  ARM: multi_v7_defconfig: Remove MAX77802 RTC Kconfig symbol
  ARM: exynos_defconfig: Remove MAX77802 RTC Kconfig symbol
  rtc: max77686: Cleanup and reduce dmesg output
  rtc: Remove Maxim 77802 driver
  rtc: max77686: Properly handle regmap_irq_get_virq() error code
  rtc: max77686: Fix unsupported year message
  rtc: max77686: Add max77802 support
  rtc: max77686: Add an indirection level to access RTC registers
  rtc: max77686: Use a driver data struct instead hard-coded values
  rtc: max77686: Use usleep_range() instead of msleep()
  rtc: max77686: Use ARRAY_SIZE() instead of current array length
  rtc: max77686: Fix max77686_rtc_read_alarm() return value
  ARM: exynos_defconfig: Enable s5p-secss driver
  ARM: exynos_defconfig: Enable NEON, accelerated crypto and cpufreq stats
Signed-off-by: Olof Johansson <olof@lixom.net>

Signed-off-by: Lars Persson <larper@axis.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'realview-defconfig-redux' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator into next/defconfig

This makes the RealView defconfig select SMP on UP
so we only need one defconfig for RealView, then adds
USB mass storage configuration.

* tag 'realview-defconfig-redux' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
  ARM: realview: enable USB storage in the defconfig
  ARM: realview: delete realview-smp_defconfig
  ARM: realview: activate SMP on the default defconfig
Signed-off-by: Olof Johansson <olof@lixom.net>

AT24 compatible eeproms are used in BB family and X15 boards.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

Many OMAP3 boards have a TVP5150/1 video decoder attached to the OMAP3
ISP so enable support for its driver as a module to be able to test it.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

The OMAP3 SoC has a Image Signal Processor (ISP) that's used to accelerate
camera images processing. The ISP driver implements V4L2, Media Controller
and V4L2 sub-dev interfaces so enable support for the driver and all these
dependencies to allow video capture to be tested using this HW IP block.

Also, disable the I2C ancillary drivers auto-select option since the media
driver does not auto-select the ancillary devices that are attached to the
bridge because this depends on what's present in the supported OMAP boards.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

OMAP3 media platform drivers (i.e: omap3isp) needs IOMMU support so
enable it to be able to test the OMAP3 Image Signal Processor (ISP).
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

This pull request brings in defconfig changes to enable bcm2836 in the
2835 and multi_v7 defconfigs.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Enable CONFIG_BLK_DEV_INITRD.
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>

Enable the BCM2835/BCM2836 options required to boot Raspberry Pi.
Signed-off-by: Daniel Stone <daniels@collabora.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Lee Jones <lee@kernel.org>
Cc: Olof Johansson <olof@lixom.net>
Tested-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Eric Anholt <eric@anholt.net>

After enabling the Raspberry Pi firmware driver which allow us to handle
power domains for USB or graphics.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

This enables the Raspberry Pi driver for GPU specific features.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Signed-off-by: Eric Anholt <eric@anholt.net>

This makes the RPi2 work; it has an ARMv7 CPU.
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Eric Anholt <eric@anholt.net>

This way the kernel works on both RPi0/1 and RPi2 even with earlyprintk
in the kernel cmdline; the two hardware platforms use different physical
addresses for peripherals, so the same DEBUG_LL configuration won't work
on both. If someone needs DEBUG_LL support, they can enable it locally.
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Eric Anholt <eric@anholt.net>

This separates explicit changes desired in later patches from "automatic"
or irrelevant changes caused solely by Kconfig changes.

make ARCH=arm bcm2835_defconfig
make ARCH=arm savedefconfig
mv defconfig arch/arm/configs/bcm2835_defconfig
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Eric Anholt <eric@anholt.net>

SRAM support is needed for the hardware buffer management used by the
mvneta driver.

[gregory.clement@free-electrons.com: add commit log]
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

Enable configuration options useful for Vybrid:
- NFC NAND driver
- USB dual-role controller support
- FTM PWM driver
- DSPI SPI driver
- Colibri VF50 Touchscreen support.

Beside that, enable useful configurations such as IIO hwmon support
(used in i.MX 23/28, patch pending for Vybrid), PWM LED support and
CPU idle support.

Regenerated config using savedefconfig (which removes some configs
which are now enabled by default).
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Select the sahara crypto driver that is used on i.MX53.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>

Signed-off-by: Denis Carikli <denis@eukrea.com>
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>

Allwinner SoCs typically have a Mentor Graphics Inventra MUSB dual role
controller for USB OTG.

Now that the issue with MUSB and USB gadget registration order has been
resolved, we can enable this driver in dual role mode. This requires the
NOP USB transceiver driver, which is also enabled.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

It is not uncommon to boot a root filesystem from a USB
pendrive and similar, so enable USB mass storage, backed
by SCSI and SD block devices in the RealView defconfig.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

We enabled SMP in the realview_defconfig so delete the
SMP-specific defconfig.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

The realview has two defconfigs: realview_defconfig and
realview-smp_defconfig. We now have working SMP_ON_UP so
make them equal so we can delete the -smp variant. For
some reason NO_HZ_FULL was missing from the plain
realview_defconfig.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>