- 22 Feb, 2013 40 commits
-
-
Jingoo Han authored
Lowercase names of structs should be used, because they are not preprocessor macros. Signed-off-by:
Jingoo Han <jg1.han@samsung.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Jingoo Han authored
Reorder inclusions of <linux/xxx.h> for redability, according to alphabetical ordering. Also, unnecessary header comments are removed. Signed-off-by:
-
Jingoo Han authored
Redundant return variables are removed to reduce the code. Signed-off-by:
-
Jingoo Han authored
Replace EFAULT with EINVAL, because EFAULT tends to be for the invalid memory addresses. Signed-off-by:
-
Jingoo Han authored
Removee unnecessary NULL deference check, because it was already checked in ld9040_probe(). Also, power_is_on is replaced with ld9040_power_is_on(). Signed-off-by:
-
Jingoo Han authored
Replace mdelay with msleep to remove the busy loop waiting. Signed-off-by:
-
Jingoo Han authored
Add the lms501kf03 LCD panel driver. The lms501kf03 LCD panel (800 x 480) driver uses 3-wired SPI inteface. [akpm@linux-foundation.org: remove unused variable `before_power'] [akpm@linux-foundation.org: make lms501kf03_shutdown() static, per Fengguang] Signed-off-by:
Ilho Lee <Ilho215.lee@samsung.com> Signed-off-by:
-
Cody P Schafer authored
Add gfp.h, mmzone.h, memory_hotplug.h & vmalloc.h to the "MEMORY MANAGMENT" section so scripts/get_maintainer.pl can do a better job of making recommendations. Signed-off-by:
Cody P Schafer <cody@linux.vnet.ibm.com> Signed-off-by:
-
Geert Uytterhoeven authored
For removed files, get_maintainer.pl doesn't find any maintainers (besides the default linux-kernel@vger.kernel.org), as it only looks at the "+++" lines, which are "/dev/null" for removals. Fix this by extending the parsing to the "---" lines. E.g. for the two line test patch below the real score maintainers will now be found: --- a/arch/score/include/asm/dma-mapping.h +++ /dev/null Signed-off-by:Geert Uytterhoeven <geert@linux-m68k.org> Cc: Joe Perches <joe@perches.com> Signed-off-by:
-
Mikhail Gruzdev authored
Standardize pr_devel logging macros family by adding pr_devel_once and pr_devel_ratelimited. Signed-off-by:
Mikhail Gruzdev <michail.gruzdev@gmail.com> Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Stepan Moskovchenko authored
Add the %pa format specifier for printing a phys_addr_t type and its derivative types (such as resource_size_t), since the physical address size on some platforms can vary based on build options, regardless of the native integer type. Signed-off-by:
Stepan Moskovchenko <stepanm@codeaurora.org> Cc: Rob Landley <rob@landley.net> Cc: George Spelvin <linux@horizon.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Andrei Emeltchenko <andrei.emeltchenko@intel.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:
-
Andrew Morton authored
Remove a tabstop from the switch statement, in the usual fashion. A few instances of weirdwrapping were removed as a result. Cc: Chen Gang <gang.chen@asianux.com> Cc: Cyrill Gorcunov <gorcunov@openvz.org> Acked-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Chen Gang authored
arg2 will never < 0, for its type is 'unsigned long' Also, use the provided macros. Signed-off-by:
Chen Gang <gang.chen@asianux.com> Reported-by:
Cyrill Gorcunov <gorcunov@openvz.org> Acked-by:
-
Christian Kujau authored
After I came across a help text for SUNGEM mentioning a broken sun.com URL, I felt like fixing those up, as they are now pointing to oracle.com URLs. Signed-off-by:
Christian Kujau <lists@nerdbynature.de> Acked-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Kyle McMartin authored
CONFIG_EXPERT doesn't really make sense, and hides it unintentionally. Remove superfluous "default n" pointed out by Ingo as well. Signed-off-by:
Kyle McMartin <kyle@redhat.com> Acked-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Shaohua Li authored
I'm testing swapout workload in a two-socket Xeon machine. The workload has 10 threads, each thread sequentially accesses separate memory region. TLB flush overhead is very big in the workload. For each page, page reclaim need move it from active lru list and then unmap it. Both need a TLB flush. And this is a multthread workload, TLB flush happens in 10 CPUs. In X86, TLB flush uses generic smp_call)function. So this workload stress smp_call_function_many heavily. Without patch, perf shows: + 24.49% [k] generic_smp_call_function_interrupt - 21.72% [k] _raw_spin_lock - _raw_spin_lock + 79.80% __page_check_address + 6.42% generic_smp_call_function_interrupt + 3.31% get_swap_page + 2.37% free_pcppages_bulk + 1.75% handle_pte_fault + 1.54% put_super + 1.41% grab_super_passive + 1.36% __swap_duplicate + 0.68% blk_flush_plug_list + 0.62% swap_info_get + 6.55% [k] flush_tlb_func + 6.46% [k] smp_call_function_many + 5.09% [k] call_function_interrupt + 4.75% [k] default_send_IPI_mask_sequence_phys + 2.18% [k] find_next_bit swapout throughput is around 1300M/s. With the patch, perf shows: - 27.23% [k] _raw_spin_lock - _raw_spin_lock + 80.53% __page_check_address + 8.39% generic_smp_call_function_single_interrupt + 2.44% get_swap_page + 1.76% free_pcppages_bulk + 1.40% handle_pte_fault + 1.15% __swap_duplicate + 1.05% put_super + 0.98% grab_super_passive + 0.86% blk_flush_plug_list + 0.57% swap_info_get + 8.25% [k] default_send_IPI_mask_sequence_phys + 7.55% [k] call_function_interrupt + 7.47% [k] smp_call_function_many + 7.25% [k] flush_tlb_func + 3.81% [k] _raw_spin_lock_irqsave + 3.78% [k] generic_smp_call_function_single_interrupt swapout throughput is around 1400M/s. So there is around a 7% improvement, and total cpu utilization doesn't change. Without the patch, cfd_data is shared by all CPUs. generic_smp_call_function_interrupt does read/write cfd_data several times which will create a lot of cache ping-pong. With the patch, the data becomes per-cpu. The ping-pong is avoided. And from the perf data, this doesn't make call_single_queue lock contend. Next step is to remove generic_smp_call_function_interrupt() from arch code. Signed-off-by:Shaohua Li <shli@fusionio.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@elte.hu> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Jens Axboe <axboe@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Michel Lespinasse authored
Update the alpha arch_get_unmapped_area function to make use of vm_unmapped_area() instead of implementing a brute force search. Signed-off-by:
Michel Lespinasse <walken@google.com> Acked-by:
Rik van Riel <riel@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Matt Turner <mattst88@gmail.com> Signed-off-by:
-
Jan Kara authored
When stable pages are required, we have to wait if the page is just going to disk and we want to modify it. Add proper callback to ubifs_vm_page_mkwrite(). Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Darrick J. Wong <darrick.wong@oracle.com> Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Ron Minnich <rminnich@sandia.gov> Cc: Latchesar Ionkov <lucho@ionkov.net> Signed-off-by:
-
Jan Kara authored
When stable pages are required, we have to wait if the page is just going to disk and we want to modify it. Add proper callback to ocfs2_grab_pages_for_write(). Signed-off-by:
Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: Steven Whitehouse <swhiteho@redhat.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Eric Van Hensbergen <ericvh@gmail.com> Cc: Ron Minnich <rminnich@sandia.gov> Cc: Latchesar Ionkov <lucho@ionkov.net> Signed-off-by:
-
Darrick J. Wong authored
This provides a band-aid to provide stable page writes on jbd without needing to backport the fixed locking and page writeback bit handling schemes of jbd2. The band-aid works by using bounce buffers to snapshot page contents instead of waiting. For those wondering about the ext3 bandage -- fixing the jbd locking (which was done as part of ext4dev years ago) is a lot of surgery, and setting PG_writeback on data pages when we actually hold the page lock dropped ext3 performance by nearly an order of magnitude. If we're going to migrate iscsi and raid to use stable page writes, the complaints about high latency will likely return. We might as well centralize their page snapshotting thing to one place. Signed-off-by:
Andy Lutomirski <luto@amacapital.net> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Artem Bityutskiy <dedekind1@gmail.com> Reviewed-by:
-
Darrick J. Wong authored
Fix up the ->page_mkwrite handler to provide stable page writes if necessary. Signed-off-by:
-
Darrick J. Wong authored
Create a helper function to check if a backing device requires stable page writes and, if so, performs the necessary wait. Then, make it so that all points in the memory manager that handle making pages writable use the helper function. This should provide stable page write support to most filesystems, while eliminating unnecessary waiting for devices that don't require the feature. Before this patchset, all filesystems would block, regardless of whether or not it was necessary. ext3 would wait, but still generate occasional checksum errors. The network filesystems were left to do their own thing, so they'd wait too. After this patchset, all the disk filesystems except ext3 and btrfs will wait only if the hardware requires it. ext3 (if necessary) snapshots pages instead of blocking, and btrfs provides its own bdi so the mm will never wait. Network filesystems haven't been touched, so either they provide their own stable page guarantees or they don't block at all. The blocking behavior is back to what it was before 3.0 if you don't have a disk requiring stable page writes. Here's the result of using dbench to test latency on ext2: 3.8.0-rc3: Operation Count AvgLat MaxLat ---------------------------------------- WriteX 109347 0.028 59.817 ReadX 347180 0.004 3.391 Flush 15514 29.828 287.283 Throughput 57.429 MB/sec 4 clients 4 procs max_latency=287.290 ms 3.8.0-rc3 + patches: WriteX 105556 0.029 4.273 ReadX 335004 0.005 4.112 Flush 14982 30.540 298.634 Throughput 55.4496 MB/sec 4 clients 4 procs max_latency=298.650 ms As you can see, the maximum write latency drops considerably with this patch enabled. The other filesystems (ext3/ext4/xfs/btrfs) behave similarly, but see the cover letter for those results. Signed-off-by:
Steven Whitehouse <swhiteho@redhat.com> Reviewed-by:
-
Darrick J. Wong authored
This patchset ("stable page writes, part 2") makes some key modifications to the original 'stable page writes' patchset. First, it provides creators (devices and filesystems) of a backing_dev_info a flag that declares whether or not it is necessary to ensure that page contents cannot change during writeout. It is no longer assumed that this is true of all devices (which was never true anyway). Second, the flag is used to relaxed the wait_on_page_writeback calls so that wait only occurs if the device needs it. Third, it fixes up the remaining disk-backed filesystems to use this improved conditional-wait logic to provide stable page writes on those filesystems. It is hoped that (for people not using checksumming devices, anyway) this patchset will give back unnecessary performance decreases since the original stable page write patchset went into 3.0. Sorry about not fixing it sooner. Complaints were registered by several people about the long write latencies introduced by the original stable page write patchset. Generally speaking, the kernel ought to allocate as little extra memory as possible to facilitate writeout, but for people who simply cannot wait, a second page stability strategy is (re)introduced: snapshotting page contents. The waiting behavior is still the default strategy; to enable page snapshotting, a superblock flag (MS_SNAP_STABLE) must be set. This flag is used to bandaid^Henable stable page writeback on ext3[1], and is not used anywhere else. Given that there are already a few storage devices and network FSes that have rolled their own page stability wait/page snapshot code, it would be nice to move towards consolidating all of these. It seems possible that iscsi and raid5 may wish to use the new stable page write support to enable zero-copy writeout. Thank you to Jan Kara for helping fix a couple more filesystems. Per Andrew Morton's request, here are the result of using dbench to measure latencies on ext2: 3.8.0-rc3: Operation Count AvgLat MaxLat ---------------------------------------- WriteX 109347 0.028 59.817 ReadX 347180 0.004 3.391 Flush 15514 29.828 287.283 Throughput 57.429 MB/sec 4 clients 4 procs max_latency=287.290 ms 3.8.0-rc3 + patches: WriteX 105556 0.029 4.273 ReadX 335004 0.005 4.112 Flush 14982 30.540 298.634 Throughput 55.4496 MB/sec 4 clients 4 procs max_latency=298.650 ms As you can see, for ext2 the maximum write latency decreases from ~60ms on a laptop hard disk to ~4ms. I'm not sure why the flush latencies increase, though I suspect that being able to dirty pages faster gives the flusher more work to do. On ext4, the average write latency decreases as well as all the maximum latencies: 3.8.0-rc3: WriteX 85624 0.152 33.078 ReadX 272090 0.010 61.210 Flush 12129 36.219 168.260 Throughput 44.8618 MB/sec 4 clients 4 procs max_latency=168.276 ms 3.8.0-rc3 + patches: WriteX 86082 0.141 30.928 ReadX 273358 0.010 36.124 Flush 12214 34.800 165.689 Throughput 44.9941 MB/sec 4 clients 4 procs max_latency=165.722 ms XFS seems to exhibit similar latency improvements as ext2: 3.8.0-rc3: WriteX 125739 0.028 104.343 ReadX 399070 0.005 4.115 Flush 17851 25.004 131.390 Throughput 66.0024 MB/sec 4 clients 4 procs max_latency=131.406 ms 3.8.0-rc3 + patches: WriteX 123529 0.028 6.299 ReadX 392434 0.005 4.287 Flush 17549 25.120 188.687 Throughput 64.9113 MB/sec 4 clients 4 procs max_latency=188.704 ms ...and btrfs, just to round things out, also shows some latency decreases: 3.8.0-rc3: WriteX 67122 0.083 82.355 ReadX 212719 0.005 2.828 Flush 9547 47.561 147.418 Throughput 35.3391 MB/sec 4 clients 4 procs max_latency=147.433 ms 3.8.0-rc3 + patches: WriteX 64898 0.101 71.631 ReadX 206673 0.005 7.123 Flush 9190 47.963 219.034 Throughput 34.0795 MB/sec 4 clients 4 procs max_latency=219.044 ms Before this patchset, all filesystems would block, regardless of whether or not it was necessary. ext3 would wait, but still generate occasional checksum errors. The network filesystems were left to do their own thing, so they'd wait too. After this patchset, all the disk filesystems except ext3 and btrfs will wait only if the hardware requires it. ext3 (if necessary) snapshots pages instead of blocking, and btrfs provides its own bdi so the mm will never wait. Network filesystems haven't been touched, so either they provide their own wait code, or they don't block at all. The blocking behavior is back to what it was before 3.0 if you don't have a disk requiring stable page writes. This patchset has been tested on 3.8.0-rc3 on x64 with ext3, ext4, and xfs. I've spot-checked 3.8.0-rc4 and seem to be getting the same results as -rc3. [1] The alternative fixes to ext3 include fixing the locking order and page bit handling like we did for ext4 (but then why not just use ext4?), or setting PG_writeback so early that ext3 becomes extremely slow. I tried that, but the number of write()s I could initiate dropped by nearly an order of magnitude. That was a bit much even for the author of the stable page series! :) This patch: Creates a per-backing-device flag that tracks whether or not pages must be held immutable during writeout. Eventually it will be used to waive wait_for_page_writeback() if nothing requires stable pages. Signed-off-by: -
Johannes Berg authored
I recently made the mistake of writing: foo = lockdep_dereference_protected(..., lockdep_assert_held(...)); which is clearly bogus. If lockdep is disabled in the config this would cause a compile failure, if it is enabled then it compiles and causes a puzzling warning about dereferencing without the correct protection. Wrap the macro in "do { ... } while (0)" to also fail compile for this when lockdep is enabled. Signed-off-by:Johannes Berg <johannes.berg@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ingo Molnar <mingo@redhat.com> Signed-off-by:
-
Junxiao Bi authored
If lockres refresh failed, the super lock will never be released which will cause some processes on other cluster nodes hung forever. Signed-off-by:
Junxiao Bi <junxiao.bi@oracle.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Cc: <stable@vger.kernel.org> Signed-off-by:
-
Tim Gardner authored
smatch analysis indicates a number of redundant NULL checks before calling kfree(), eg: fs/ocfs2/alloc.c:6138 ocfs2_begin_truncate_log_recovery() info: redundant null check on *tl_copy calling kfree() fs/ocfs2/alloc.c:6755 ocfs2_zero_range_for_truncate() info: redundant null check on pages calling kfree() etc.... [akpm@linux-foundation.org: revert dubious change in ocfs2_begin_truncate_log_recovery()] Signed-off-by:
Tim Gardner <tim.gardner@canonical.com> Cc: Mark Fasheh <mfasheh@suse.com> Acked-by:
-
Wei Yongjun authored
The dereference should be moved below the NULL test. spatch with a semantic match is used to found this. (http://coccinelle.lip6.fr/) Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Cc: Joel Becker <jlbec@evilplan.org> Signed-off-by:
-
Kirill Tkhai authored
- Add magic for declarations of variables of popular kernel type like spinlock_t, list_head, wait_queue_head_t and other. - Add a set of specially handled declaration extentions like __attribute, __aligned and other. - Simplify pci_bus_* magic Signed-off-by:
Kirill V Tkhai <tkhai@yandex.ru> Cc: Michal Marek <mmarek@suse.cz> Signed-off-by:
-
Greg Kroah-Hartman authored
How is the compiler even handling exported functions that are marked inline? Anyway, these shouldn't be inline because of that, so remove that marking. Based on a larger patch by Mark Charlebois to get LLVM to build the kernel. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Mark Charlebois <mcharleb@qualcomm.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: hank <pyu@redhat.com> Cc: John Stultz <john.stultz@linaro.org> Signed-off-by:
-
Fabio Estevam authored
Fix the following sparse error: drivers/video/mx3fb.c:1309:28: warning: Using plain integer as NULL pointer Signed-off-by:
Fabio Estevam <fabio.estevam@freescale.com> Acked-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Ajay Kumar authored
disable_irq() should be moved to exynos_dp_suspend(), because enable_irq() is called at exynos_dp_resume(). Signed-off-by:
Ajay Kumar <ajaykumar.rs@samsung.com> Signed-off-by:
-
Jingoo Han authored
of_find_node_by_name() returns a node pointer with refcount incremented, use of_node_put() on it when done. of_find_node_by_name() will call of_node_put() against the node pass to from parameter, thus we also need to call of_node_get(from) before calling of_find_node_by_name(). Signed-off-by:
-
Tomasz Figa authored
The correct value for VIDCON1_VSTATUS_FRONTPORCH is 3, not 0. Signed-off-by:
Tomasz Figa <t.figa@samsung.com> Signed-off-by:
Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by:
-
Jingoo Han authored
Add the bit definitions for CSC EQ709 and EQ601. These definitons are used to control the CSC parameter such as equation 709 and equation 601. Signed-off-by:
-
Jingoo Han authored
Remove unnecessary brackets and the duplicated VIDTCON2 definition. Also, header comment is modified, because EXYNOS series is supported and <mach/regs-fb.h> is not available. Signed-off-by:
-
Jingoo Han authored
S3C_FB_MAX_WIN is already defined in 'plat-samsung/include/plat/fb.h'. So, this definition in 'include/video/samsung_fimd.h' should be removed to avoid the duplication. Signed-off-by:
-
Jingoo Han authored
Use ARCH_ dependancy when using s3c-fb. S3C_DEV_FB, S5P_DEV_FIMD0 cannot be enabled on EXYNOS5. So, ARCH_ should be used as dependancy for s3c-fb. Signed-off-by:
-
Sachin Kamat authored
devm_* APIs are device managed and make exit and cleanup code simpler. While at it also remove some unused labels and fix an error path. Signed-off-by:
Sachin Kamat <sachin.kamat@linaro.org> Acked-by:
Donghwa Lee <dh09.lee@samsung.com> Cc: Inki Dae <inki.dae@samsung.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Signed-off-by:
-
Sachin Kamat authored
Checking an unsigned variable for negative value returns false. Hence use the macro to fix it. Fixes the following smatch warning: drivers/video/exynos/exynos_mipi_dsi.c:417 exynos_mipi_dsi_probe() warn: unsigned 'dsim->irq' is never less than zero. Signed-off-by:
-
Sachin Kamat authored
devm_* APIs are device managed and make error handling and code cleanup simpler. Signed-off-by:
-
