- 26 Jul, 2016 40 commits
-
-
phil.turnbull@oracle.com authored
If 'tunnel' is NULL we should return -EBADF but the 'end_put_sess' path unconditionally sets 'error' back to zero. Rework the error path so it more closely matches pppol2tp_sendmsg. Fixes: fd558d18 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Signed-off-by:
Phil Turnbull <phil.turnbull@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Bhaktipriya Shridhar authored
The workqueue health->wq was used as per device private health thread. This was done to perform delayed work. The workqueue has a single workitem(&health->work) and hence doesn't require ordering. It is involved in handling the health of the device and is not being used on a memory reclaim path. Hence, the singlethreaded workqueue has been replaced with the use of system_wq. Work item has been flushed in mlx5_health_cleanup() to ensure that there are no pending tasks while disconnecting the driver. Signed-off-by:
Bhaktipriya Shridhar <bhaktipriya96@gmail.com> Acked-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Nikolay Aleksandrov authored
Currently lastuse is updated on entry creation and cache hit, but it should also be updated on entry change. Since both on add and update the ttl array is updated we can simply update the lastuse in ipmr_update_thresholds. Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> CC: Roopa Prabhu <roopa@cumulusnetworks.com> CC: Donald Sharp <sharpd@cumulusnetworks.com> CC: David S. Miller <davem@davemloft.net> Signed-off-by:
-
Beniamino Galvani authored
macsec_decrypt() is not called when validation is disabled and so macsec_skb_cb(skb)->rx_sa is not set; but it is used later in macsec_post_decrypt(), ensure that it's always initialized. Fixes: c09440f7 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by:
Beniamino Galvani <bgalvani@redhat.com> Acked-by:
Sabrina Dubroca <sd@queasysnail.net> Signed-off-by:
-
David S. Miller authored
Parthasarathy Bhuvaragan says: ==================== tipc: netlink updates for neighbour monitor This series contains the updates to configure and read the attributes for neighbour monitor. v2: rebase on top of net-next ==================== Signed-off-by: -
Parthasarathy Bhuvaragan authored
In this commit, we dump the monitor attributes when queried. The link monitor attributes are separated into two kinds: 1. general attributes per bearer 2. specific attributes per node/peer This style resembles the socket attributes and the nametable publications per socket. Reviewed-by:
Jon Maloy <jon.maloy@ericsson.com> Signed-off-by:
Parthasarathy Bhuvaragan <parthasarathy.bhuvaragan@ericsson.com> Signed-off-by:
-
Parthasarathy Bhuvaragan authored
Introduce a new function to get the bearer name from its id. This is used in subsequent commit. Reviewed-by:
-
Parthasarathy Bhuvaragan authored
In this commit, we add support to fetch the configured cluster monitoring threshold. Reviewed-by:
-
Parthasarathy Bhuvaragan authored
In this commit, we introduce support to configure the minimum threshold to activate the new link monitoring algorithm. Reviewed-by:
-
Parthasarathy Bhuvaragan authored
In this commit, we introduce defines for tipc address size, offset and mask specification for Zone.Cluster.Node. There is no functional change in this commit. Reviewed-by:
-
He Chunhui authored
NUD_STALE is used when the caller(e.g. arp_process()) can't guarantee neighbour reachability. If the entry was NUD_VALID and lladdr is unchanged, the entry state should not be changed. Currently the code puts an extra "NUD_CONNECTED" condition. So if old state was NUD_DELAY or NUD_PROBE (they are NUD_VALID but not NUD_CONNECTED), the state can be changed to NUD_STALE. This may cause problem. Because NUD_STALE lladdr doesn't guarantee reachability, when we send traffic, the state will be changed to NUD_DELAY. In normal case, if we get no confirmation (by dst_confirm()), we will change the state to NUD_PROBE and send probe traffic. But now the state may be reset to NUD_STALE again(e.g. by broadcast ARP packets), so the probe traffic will not be sent. This situation may happen again and again, and packets will be sent to an non-reachable lladdr forever. The fix is to remove the "NUD_CONNECTED" condition. After that the "NEIGH_UPDATE_F_WEAK_OVERRIDE" condition (used by IPv6) in that branch will be redundant, so remove it. This change may increase probe traffic, but it's essential since NUD_STALE lladdr is unreliable. To ensure correctness, we prefer to resolve lladdr, when we can't get confirmation, even while remote packets try to set NUD_STALE state. Signed-off-by:
Chunhui He <hchunhui@mail.ustc.edu.cn> Signed-off-by:
Julian Anastasov <ja@ssi.bg> Reviewed-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
David S. Miller authored
Iyappan Subramanian says: ==================== drivers: net: xgene: Fix module crash and 1G hot-plug This patchset addresses the following issues, 1. Fixes the kernel crash when the driver loaded as an kernel module - by fixing hardware cleanups and rearrange kernel API calls 2. Hot-plug issue on the SGMII 1G interface - by adding a driver for MDIO management Signed-off-by:
Iyappan Subramanian <isubramanian@apm.com> Tested-by:
Fushen Chen <fchen@apm.com> Tested-by:
Toan Le <toanle@apm.com> --- v7: Address review comments from v6 - fixed kbuild warnings - unmapped DMA memory on xgene_enet_delete_bufpool() - delete descriptor rings and buffer pools on cle_init() failure - fixed error deconstruction path on probe v6: Address review comments from v5 - changed to use devm_ioremap_resource - changed to return PTR_ERR(clk) on failure - cleaned up and removed indirections - exported mdio read/write and phy_register functions - changed mii_bus is to indicate interface instance - changed to call the exported mdio read/write and phy_register functions v5: Address review comments from v4 - Fixed clock reset sequence by adding delay - Fixed clock count by adding clk_unprepare_disable() in port shutdown v4: Address review comments from v3 - Reorganized into smaller patches - Added wrapper functions for sgmii_control_reset and sgmii_tbi_control_reset - Removed clk_get warning info - mdio: Changed the order of 'if' statements and removed the 'else' statement - mdio: Removed the mdio_read(write) indirection wrapper functions - ethtool: Fixed SGMII 1G get_settings and set_settings - Documentation: dtb: Added MDIO node information - MAINTAINERS: Added MDIO driver and documentation path v3: Address review comments from v2 - Add comment about hardware clock reset sequence on xgene_mdio_reset v2: Address review comments from v1 - Fixed patch 1 compilation error - Fixed mdio@1f610000 xge0clk reference - Squashed dtb patches - Added PORT_OFFSET macro v1: - Initial version ==================== Signed-off-by:
-
Iyappan Subramanian authored
Added path to the MDIO driver and Documentation file. Signed-off-by:
-
Iyappan Subramanian authored
Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Iyappan Subramanian authored
Added mdio node for mdio driver. Also added phy-handle reference to the ethernet nodes. Removed unused clock node from storm sgenet1. Signed-off-by:
-
Iyappan Subramanian authored
Changed SGMII 1G get_settings to use phy_ethtool_gset. Changed SGMII 1G set_settings to use phy_ethtool_sset. Signed-off-by:
-
Iyappan Subramanian authored
This patch reuses the mdio read/write and phy_register functions and removed the local definitions. Signed-off-by:
-
Iyappan Subramanian authored
This patch enables MDIO driver by, - Selecting MDIO_XGENE - Changed open and close to use phy_start and phy_stop - Changed to use mac_ops->tx(rx)_enable and tx(rx)_disable Signed-off-by:
-
Iyappan Subramanian authored
This patch adds xgene_enet_check_phy_hanlde() function that checks whether MDIO driver is probed successfully and sets pdata->mdio_driver to true. If MDIO driver is not probed, ethernet driver falls back to backward compatibility mode. Since enum xgene_enet_cmd is used by MDIO driver, removing this from ethernet driver. Signed-off-by:
-
Iyappan Subramanian authored
Currently, SGMII based 1G rely on the hardware registers for link state and sometimes it's not reliable. To get most accurate link state, this interface has to use the MDIO bus to poll the PHY. In X-Gene SoC, MDIO bus is shared across RGMII and SGMII based 1G interfaces, so adding this driver to manage MDIO bus. This driver registers the mdio bus and registers the PHYs connected to it. Signed-off-by:
-
Iyappan Subramanian authored
This patch fixes clock reset sequence. - Added clock reset sequence for ACPI - Added delay in clock reset sequence to make sure pulse is generated - Added clk_unprepare_disable() in port shutdown to make sure clock increment/decrement counts are matching - Removed MII_MGMT_CONFIG programming, since it is not required - Fixed programming XGENET_CONFIG_REG to enable SGMII mode Signed-off-by:
-
Iyappan Subramanian authored
When the driver is configured as kernel module and when it gets unloaded and reloaded, kernel crash was observed. This patch addresses the software cleanup by doing the following, - Moved register_netdev call after hardware is ready - Since ndev is not ready, added set_irq_name to set irq name - Since ndev is not ready, changed mdio_bus->parent to pdev->dev - Replaced netif_start(stop)_queue by netif_tx_start(stop)_queues - Removed napi_del call since it's called by free_netdev - Added dev_close call, within remove - Added shutdown callback - Changed to use dmam_ APIs Signed-off-by:
-
Iyappan Subramanian authored
When the driver is configured as kernel module and when it gets unloaded and reloaded, kernel crash was observed. This patch address the hardware resource cleanups by doing the following, - Added mac_ops->clear() to do prefetch buffer clean up - Fixed delete freepool buffers logic - Reordered mac_enable and mac_disable - Added Tx completion ring free - Moved down delete_desc_rings after ring cleanup Signed-off-by:
-
Iyappan Subramanian authored
Since mac_init is too heavy to be called when the link changes, moved the speed_set configuration to a new function and added mac_ops->set_speed function pointer. This function will be called from adjust_link callback. Added cases for 10/100 support for SGMII based 1G interface. Signed-off-by:
-
David S. Miller authored
Cong Wang says: ==================== net_sched: refactor tc action structures These two patches factor out the struct tcf_common. v2: fix a compile warning ==================== Signed-off-by: -
WANG Cong authored
After the previous patch, struct tc_action should be enough to represent the generic tc action, tcf_common is not necessary any more. This patch gets rid of it to make tc action code more readable. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
WANG Cong authored
struct tc_action is confusing, currently we use it for two purposes: 1) Pass in arguments and carry out results from helper functions 2) A generic representation for tc actions The first one is error-prone, since we need to make sure we don't miss anything. This patch aims to get rid of this use, by moving tc_action into tcf_common, so that they are allocated together in hashtable and can be cast'ed easily. And together with the following patch, we could really make tc_action a generic representation for all tc actions and each type of action can inherit from it. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Mahesh Bandewar authored
The earlier patch c3aaa06d (ipvlan: scrub skb before routing in L3 mode.) did this but only for TX path in L3 mode. This patch extends it for both the modes for TX/RX path. Signed-off-by:
Mahesh Bandewar <maheshb@google.com> Signed-off-by:
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: Improve ntuple filters and add new IDs. Improve ntuple filters and add some new PCI device IDs. Please review for net-next. ==================== Signed-off-by: -
Michael Chan authored
Add 5741X/5731X NPAR device IDs and dual media SFP/10GBase-T device IDs. Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Vasundhara Volam authored
If there are not enough resources to enable ntuple filtering, log a warning message. v2: Use single message and add missing newline. Signed-off-by:
Vasundhara Volam <vasundhara-v.volam@broadcom.com> Signed-off-by:
-
Michael Chan authored
Include the destination MAC address in the ntuple filter structure. The current code assumes that the destination MAC address is always the MAC address of the NIC. This may not be true if there are macvlans, for example. Add destination MAC address checking and configure the filter correctly using the correct index for the destination MAC address. Signed-off-by:
-
Manish Chopra authored
Slowpath completion handling is incorrectly changing SPQ_RING_SIZE bits instead of a single one. Fixes: 76a9a364 ("qed: fix handling of concurrent ramrods") Signed-off-by:
Manish Chopra <manish.chopra@qlogic.com> Signed-off-by:
Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by:
-
Daniel Borkmann authored
After a6127697 ("udp: prevent bugcheck if filter truncates packet too much"), there followed various other fixes for similar cases such as f4979fce ("rose: limit sk_filter trim to payload"). Latter introduced a new helper sk_filter_trim_cap(), where we can pass the trim limit directly to the socket filter handling. Make use of it here as well with sizeof(struct udphdr) as lower cap limit and drop the extra skb->len test in UDP's input path. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Cc: Willem de Bruijn <willemb@google.com> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Bhaktipriya Shridhar authored
alloc_workqueue replaces deprecated create_singlethread_workqueue(). A dedicated workqueue has been used since the workitems are being used on a packet tx/rx path. Hence, WQ_MEM_RECLAIM has been set to guarantee forward progress under memory pressure. An ordered workqueue has been used since workitems &cfhsi->wake_up_work and &cfhsi->wake_down_work cannot be run concurrently. Calls to flush_workqueue() before destroy_workqueue() have been dropped since destroy_workqueue() itself calls drain_workqueue() which flushes repeatedly till the workqueue becomes empty. Signed-off-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
David S. Miller authored
Sargun Dhillon says: ==================== bpf: add bpf_probe_write_user helper & example This patch series contains two patches that add support for a probe_write helper to BPF programs. This allows them to manipulate user memory during the course of tracing. The second patch in the series has an example that uses it, in one the intended ways to divert execution. Thanks to Alexei Starovoitov, and Daniel Borkmann for being patient, review, and helping me get familiar with the code base. I've made changes based on their recommendations. This helper should be considered for experimental usage and debugging, so we print a warning to dmesg when it is along with the command and pid when someone tries to install a proglet that uses it. A follow-up patchset will contain a mechanism to verify the safety of the probe beyond what was done by hand. ---- v1->v2: restrict writing to user space, as opposed to globally v2->v3: Fixed formatting issues v3->v4: Rename copy_to_user -> bpf_probe_write Simplify checking of whether or not it's safe to write Add warnings to dmesg v4->v5: Raise warning level Cleanup location of warning code Make test fail when helper is broken v5->v6: General formatting cleanup Rename bpf_probe_write -> bpf_probe_write_user v6->v7: More formatting cleanup. Clarifying a few comments Clarified log message ==================== Signed-off-by: -
Sargun Dhillon authored
This example shows using a kprobe to act as a dnat mechanism to divert traffic for arbitrary endpoints. It rewrite the arguments to a syscall while they're still in userspace, and before the syscall has a chance to copy the argument into kernel space. Although this is an example, it also acts as a test because the mapped address is 255.255.255.255:555 -> real address, and that's not a legal address to connect to. If the helper is broken, the example will fail on the intermediate steps, as well as the final step to verify the rewrite of userspace memory succeeded. Signed-off-by:
Sargun Dhillon <sargun@sargun.me> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Signed-off-by:
-
Sargun Dhillon authored
This allows user memory to be written to during the course of a kprobe. It shouldn't be used to implement any kind of security mechanism because of TOC-TOU attacks, but rather to debug, divert, and manipulate execution of semi-cooperative processes. Although it uses probe_kernel_write, we limit the address space the probe can write into by checking the space with access_ok. We do this as opposed to calling copy_to_user directly, in order to avoid sleeping. In addition we ensure the threads's current fs / segment is USER_DS and the thread isn't exiting nor a kernel thread. Given this feature is meant for experiments, and it has a risk of crashing the system, and running programs, we print a warning on when a proglet that attempts to use this helper is installed, along with the pid and process name. Signed-off-by:
-
Alex Vesker authored
Verify that the device state is registered before un-registering it. This check is required to prevent an OOPS on flows that do re-registration of the device and its previous state was unregistered. Fixes: 225c7b1f ("IB/mlx4: Add a driver Mellanox ConnectX InfiniBand adapters") Signed-off-by:
Alex Vesker <valex@mellanox.com> Signed-off-by:
Tariq Toukan <tariqt@mellanox.com> Signed-off-by:
-
Ido Schimmel authored
When CONFIG_NET_CLS_ACT isn't set 'struct tcf_exts' has no member named 'actions' and we therefore must not access it. Otherwise compilation fails. Fix this by introducing a new macro similar to tc_no_actions(), which always returns 'false' if CONFIG_NET_CLS_ACT isn't set. Fixes: 763b4b70 ("mlxsw: spectrum: Add support in matchall mirror TC offloading") Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
-
