Skip to content

L
linux
Switch branch/tag
  1. 28 Feb, 2024 9 commits
  3. 27 Feb, 2024 18 commits
  5. 26 Feb, 2024 3 commits
  7. 24 Feb, 2024 1 commit
  9. 23 Feb, 2024 9 commits
    • Geoff Levand's avatar
      ps3/gelic: Fix SKB allocation · b0b1210b
      Geoff Levand authored 
      Commit 3ce4f9c3 ("net/ps3_gelic_net: Add gelic_descr structures") of
6.8-rc1 had a copy-and-paste error where the pointer that holds the
allocated SKB (struct gelic_descr.skb)  was set to NULL after the SKB was
allocated. This resulted in a kernel panic when the SKB pointer was
accessed.

This fix moves the initialization of the gelic_descr to before the SKB
is allocated.
Reported-by: default avatarsambat goson <sombat3960@gmail.com>
Fixes: 3ce4f9c3 ("net/ps3_gelic_net: Add gelic_descr structures")
Signed-off-by: default avatarGeoff Levand <geoff@infradead.org>
Reviewed-by: default avatarSimon Horman <horms@kernel.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      b0b1210b
    • Vladimir Oltean's avatar
      net: dpaa: fman_memac: accept phy-interface-type = "10gbase-r" in the device tree · 734f06db
      Vladimir Oltean authored 
      Since commit 5d93cfcf ("net: dpaa: Convert to phylink"), we support
the "10gbase-r" phy-mode through a driver-based conversion of "xgmii",
but we still don't actually support it when the device tree specifies
"10gbase-r" proper.

This is because boards such as LS1046A-RDB do not define pcs-handle-names
(for whatever reason) in the ethernet@f0000 device tree node, and the
code enters through this code path:

	err = of_property_match_string(mac_node, "pcs-handle-names", "xfi");
	// code takes neither branch and falls through
	if (err >= 0) {
		(...)
	} else if (err != -EINVAL && err != -ENODATA) {
		goto _return_fm_mac_free;
	}

	(...)

	/* For compatibility, if pcs-handle-names is missing, we assume this
	 * phy is the first one in pcsphy-handle
	 */
	err = of_property_match_string(mac_node, "pcs-handle-names", "sgmii");
	if (err == -EINVAL || err == -ENODATA)
		pcs = memac_pcs_create(mac_node, 0); // code takes this branch
	else if (err < 0)
		goto _return_fm_mac_free;
	else
		pcs = memac_pcs_create(mac_node, err);

	// A default PCS is created and saved in "pcs"

	// This determination fails and mistakenly saves the default PCS
	// memac->sgmii_pcs instead of memac->xfi_pcs, because at this
	// stage, mac_dev->phy_if == PHY_INTERFACE_MODE_10GBASER.
	if (err && mac_dev->phy_if == PHY_INTERFACE_MODE_XGMII)
		memac->xfi_pcs = pcs;
	else
		memac->sgmii_pcs = pcs;

In other words, in the absence of pcs-handle-names, the default
xfi_pcs assignment logic only works when in the device tree we have
PHY_INTERFACE_MODE_XGMII.

By reversing the order between the fallback xfi_pcs assignment and the
"xgmii" overwrite with "10gbase-r", we are able to support both values
in the device tree, with identical behavior.

Currently, it is impossible to make the s/xgmii/10gbase-r/ device tree
conversion, because it would break forward compatibility (new device
tree with old kernel). The only way to modify existing device trees to
phy-interface-mode = "10gbase-r" is to fix stable kernels to accept this
value and handle it properly.

One reason why the conversion is desirable is because with pre-phylink
kernels, the Aquantia PHY driver used to warn about the improper use
of PHY_INTERFACE_MODE_XGMII [1]. It is best to have a single (latest)
device tree that works with all supported stable kernel versions.

Note that the blamed commit does not constitute a regression per se.
Older stable kernels like 6.1 still do not work with "10gbase-r", but
for a different reason. That is a battle for another time.

[1] https://lore.kernel.org/netdev/20240214-ls1046-dts-use-10gbase-r-v1-1-8c2d68547393@concurrent-rt.com/

Fixes: 5d93cfcf ("net: dpaa: Convert to phylink")
Signed-off-by: default avatarVladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: default avatarSean Anderson <sean.anderson@seco.com>
Acked-by: default avatarMadalin Bucur <madalin.bucur@oss.nxp.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      734f06db
    • Felix Fietkau's avatar
      wifi: mac80211: only call drv_sta_rc_update for uploaded stations · 413dafc8
      Felix Fietkau authored 
      When a station has not been uploaded yet, receiving SMPS or channel width
notification action frames can lead to rate_control_rate_update calling
drv_sta_rc_update with uninitialized driver private data.
Fix this by adding a missing check for sta->uploaded.
Signed-off-by: default avatarFelix Fietkau <nbd@nbd.name>
Link: https://msgid.link/20240221140535.16102-1-nbd@nbd.nameSigned-off-by: default avatarJohannes Berg <johannes.berg@intel.com>
      413dafc8
    • Jeremy Kerr's avatar
      net: mctp: take ownership of skb in mctp_local_output · 3773d65a
      Jeremy Kerr authored 
      Currently, mctp_local_output only takes ownership of skb on success, and
we may leak an skb if mctp_local_output fails in specific states; the
skb ownership isn't transferred until the actual output routing occurs.

Instead, make mctp_local_output free the skb on all error paths up to
the route action, so it always consumes the passed skb.

Fixes: 833ef3b9 ("mctp: Populate socket implementation")
Signed-off-by: default avatarJeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: default avatarSimon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240220081053.1439104-1-jk@codeconstruct.com.auSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      3773d65a
    • Jakub Kicinski's avatar
      Merge branch '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue · e872469c
      Jakub Kicinski authored 
      Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2024-02-20 (ice)

This series contains updates to ice driver only.

Yochai sets parent device to properly reflect connection state between
source DPLL and output pin.

Arkadiusz fixes additional issues related to DPLL; proper reporting of
phase_adjust value and preventing use/access of data while resetting.

Amritha resolves ASSERT_RTNL() being triggered on certain reset/rebuild
flows.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  ice: Fix ASSERT_RTNL() warning during certain scenarios
  ice: fix pin phase adjust updates on PF reset
  ice: fix dpll periodic work data updates on PF reset
  ice: fix dpll and dpll_pin data access on PF reset
  ice: fix dpll input pin phase_adjust value updates
  ice: fix connection state of DPLL and out pin
====================
Reviewed-by: default avatarVadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: default avatarJiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240220214444.1039759-1-anthony.l.nguyen@intel.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      e872469c
    • Florian Westphal's avatar
      net: ip_tunnel: prevent perpetual headroom growth · 5ae1e992
      Florian Westphal authored 
      syzkaller triggered following kasan splat:
BUG: KASAN: use-after-free in __skb_flow_dissect+0x19d1/0x7a50 net/core/flow_dissector.c:1170
Read of size 1 at addr ffff88812fb4000e by task syz-executor183/5191
[..]
 kasan_report+0xda/0x110 mm/kasan/report.c:588
 __skb_flow_dissect+0x19d1/0x7a50 net/core/flow_dissector.c:1170
 skb_flow_dissect_flow_keys include/linux/skbuff.h:1514 [inline]
 ___skb_get_hash net/core/flow_dissector.c:1791 [inline]
 __skb_get_hash+0xc7/0x540 net/core/flow_dissector.c:1856
 skb_get_hash include/linux/skbuff.h:1556 [inline]
 ip_tunnel_xmit+0x1855/0x33c0 net/ipv4/ip_tunnel.c:748
 ipip_tunnel_xmit+0x3cc/0x4e0 net/ipv4/ipip.c:308
 __netdev_start_xmit include/linux/netdevice.h:4940 [inline]
 netdev_start_xmit include/linux/netdevice.h:4954 [inline]
 xmit_one net/core/dev.c:3548 [inline]
 dev_hard_start_xmit+0x13d/0x6d0 net/core/dev.c:3564
 __dev_queue_xmit+0x7c1/0x3d60 net/core/dev.c:4349
 dev_queue_xmit include/linux/netdevice.h:3134 [inline]
 neigh_connected_output+0x42c/0x5d0 net/core/neighbour.c:1592
 ...
 ip_finish_output2+0x833/0x2550 net/ipv4/ip_output.c:235
 ip_finish_output+0x31/0x310 net/ipv4/ip_output.c:323
 ..
 iptunnel_xmit+0x5b4/0x9b0 net/ipv4/ip_tunnel_core.c:82
 ip_tunnel_xmit+0x1dbc/0x33c0 net/ipv4/ip_tunnel.c:831
 ipgre_xmit+0x4a1/0x980 net/ipv4/ip_gre.c:665
 __netdev_start_xmit include/linux/netdevice.h:4940 [inline]
 netdev_start_xmit include/linux/netdevice.h:4954 [inline]
 xmit_one net/core/dev.c:3548 [inline]
 dev_hard_start_xmit+0x13d/0x6d0 net/core/dev.c:3564
 ...

The splat occurs because skb->data points past skb->head allocated area.
This is because neigh layer does:
  __skb_pull(skb, skb_network_offset(skb));

... but skb_network_offset() returns a negative offset and __skb_pull()
arg is unsigned.  IOW, we skb->data gets "adjusted" by a huge value.

The negative value is returned because skb->head and skb->data distance is
more than 64k and skb->network_header (u16) has wrapped around.

The bug is in the ip_tunnel infrastructure, which can cause
dev->needed_headroom to increment ad infinitum.

The syzkaller reproducer consists of packets getting routed via a gre
tunnel, and route of gre encapsulated packets pointing at another (ipip)
tunnel.  The ipip encapsulation finds gre0 as next output device.

This results in the following pattern:

1). First packet is to be sent out via gre0.
Route lookup found an output device, ipip0.

2).
ip_tunnel_xmit for gre0 bumps gre0->needed_headroom based on the future
output device, rt.dev->needed_headroom (ipip0).

3).
ip output / start_xmit moves skb on to ipip0. which runs the same
code path again (xmit recursion).

4).
Routing step for the post-gre0-encap packet finds gre0 as output device
to use for ipip0 encapsulated packet.

tunl0->needed_headroom is then incremented based on the (already bumped)
gre0 device headroom.

This repeats for every future packet:

gre0->needed_headroom gets inflated because previous packets' ipip0 step
incremented rt->dev (gre0) headroom, and ipip0 incremented because gre0
needed_headroom was increased.

For each subsequent packet, gre/ipip0->needed_headroom grows until
post-expand-head reallocations result in a skb->head/data distance of
more than 64k.

Once that happens, skb->network_header (u16) wraps around when
pskb_expand_head tries to make sure that skb_network_offset() is unchanged
after the headroom expansion/reallocation.

After this skb_network_offset(skb) returns a different (and negative)
result post headroom expansion.

The next trip to neigh layer (or anything else that would __skb_pull the
network header) makes skb->data point to a memory location outside
skb->head area.

v2: Cap the needed_headroom update to an arbitarily chosen upperlimit to
prevent perpetual increase instead of dropping the headroom increment
completely.

Reported-and-tested-by: syzbot+bfde3bef047a81b8fde6@syzkaller.appspotmail.com
Closes: https://groups.google.com/g/syzkaller-bugs/c/fL9G6GtWskY/m/VKk_PR5FBAAJ
Fixes: 243aad83 ("ip_gre: include route header_len in max_headroom calculation")
Signed-off-by: default avatarFlorian Westphal <fw@strlen.de>
Reviewed-by: default avatarSimon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240220135606.4939-1-fw@strlen.deSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      5ae1e992
    • Andre Werner's avatar
      net: smsc95xx: add support for SYS TEC USB-SPEmodule1 · 45532b21
      Andre Werner authored 
      This patch adds support for the SYS TEC USB-SPEmodule1 10Base-T1L
ethernet device to the existing smsc95xx driver by adding the new
USB VID/PID pair.
Signed-off-by: default avatarAndre Werner <andre.werner@systec-electronic.com>
Link: https://lore.kernel.org/r/20240219053413.4732-1-andre.werner@systec-electronic.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      45532b21
    • Florian Westphal's avatar
      netlink: add nla be16/32 types to minlen array · 9a0d1885
      Florian Westphal authored 
      BUG: KMSAN: uninit-value in nla_validate_range_unsigned lib/nlattr.c:222 [inline]
BUG: KMSAN: uninit-value in nla_validate_int_range lib/nlattr.c:336 [inline]
BUG: KMSAN: uninit-value in validate_nla lib/nlattr.c:575 [inline]
BUG: KMSAN: uninit-value in __nla_validate_parse+0x2e20/0x45c0 lib/nlattr.c:631
 nla_validate_range_unsigned lib/nlattr.c:222 [inline]
 nla_validate_int_range lib/nlattr.c:336 [inline]
 validate_nla lib/nlattr.c:575 [inline]
...

The message in question matches this policy:

 [NFTA_TARGET_REV]       = NLA_POLICY_MAX(NLA_BE32, 255),

but because NLA_BE32 size in minlen array is 0, the validation
code will read past the malformed (too small) attribute.

Note: Other attributes, e.g. BITFIELD32, SINT, UINT.. are also missing:
those likely should be added too.

Reported-by: syzbot+3f497b07aa3baf2fb4d0@syzkaller.appspotmail.com
Reported-by: default avatarxingwei lee <xrivendell7@gmail.com>
Closes: https://lore.kernel.org/all/CABOYnLzFYHSnvTyS6zGa-udNX55+izqkOt2sB9WDqUcEGW6n8w@mail.gmail.com/raw
Fixes: ecaf75ff ("netlink: introduce bigendian integer types")
Signed-off-by: default avatarFlorian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240221172740.5092-1-fw@strlen.deSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      9a0d1885
    • Ryosuke Yasuoka's avatar
      netlink: Fix kernel-infoleak-after-free in __skb_datagram_iter · 661779e1
      Ryosuke Yasuoka authored 
      syzbot reported the following uninit-value access issue [1]:

netlink_to_full_skb() creates a new `skb` and puts the `skb->data`
passed as a 1st arg of netlink_to_full_skb() onto new `skb`. The data
size is specified as `len` and passed to skb_put_data(). This `len`
is based on `skb->end` that is not data offset but buffer offset. The
`skb->end` contains data and tailroom. Since the tailroom is not
initialized when the new `skb` created, KMSAN detects uninitialized
memory area when copying the data.

This patch resolved this issue by correct the len from `skb->end` to
`skb->len`, which is the actual data offset.

BUG: KMSAN: kernel-infoleak-after-free in instrument_copy_to_user include/linux/instrumented.h:114 [inline]
BUG: KMSAN: kernel-infoleak-after-free in copy_to_user_iter lib/iov_iter.c:24 [inline]
BUG: KMSAN: kernel-infoleak-after-free in iterate_ubuf include/linux/iov_iter.h:29 [inline]
BUG: KMSAN: kernel-infoleak-after-free in iterate_and_advance2 include/linux/iov_iter.h:245 [inline]
BUG: KMSAN: kernel-infoleak-after-free in iterate_and_advance include/linux/iov_iter.h:271 [inline]
BUG: KMSAN: kernel-infoleak-after-free in _copy_to_iter+0x364/0x2520 lib/iov_iter.c:186
 instrument_copy_to_user include/linux/instrumented.h:114 [inline]
 copy_to_user_iter lib/iov_iter.c:24 [inline]
 iterate_ubuf include/linux/iov_iter.h:29 [inline]
 iterate_and_advance2 include/linux/iov_iter.h:245 [inline]
 iterate_and_advance include/linux/iov_iter.h:271 [inline]
 _copy_to_iter+0x364/0x2520 lib/iov_iter.c:186
 copy_to_iter include/linux/uio.h:197 [inline]
 simple_copy_to_iter+0x68/0xa0 net/core/datagram.c:532
 __skb_datagram_iter+0x123/0xdc0 net/core/datagram.c:420
 skb_copy_datagram_iter+0x5c/0x200 net/core/datagram.c:546
 skb_copy_datagram_msg include/linux/skbuff.h:3960 [inline]
 packet_recvmsg+0xd9c/0x2000 net/packet/af_packet.c:3482
 sock_recvmsg_nosec net/socket.c:1044 [inline]
 sock_recvmsg net/socket.c:1066 [inline]
 sock_read_iter+0x467/0x580 net/socket.c:1136
 call_read_iter include/linux/fs.h:2014 [inline]
 new_sync_read fs/read_write.c:389 [inline]
 vfs_read+0x8f6/0xe00 fs/read_write.c:470
 ksys_read+0x20f/0x4c0 fs/read_write.c:613
 __do_sys_read fs/read_write.c:623 [inline]
 __se_sys_read fs/read_write.c:621 [inline]
 __x64_sys_read+0x93/0xd0 fs/read_write.c:621
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

Uninit was stored to memory at:
 skb_put_data include/linux/skbuff.h:2622 [inline]
 netlink_to_full_skb net/netlink/af_netlink.c:181 [inline]
 __netlink_deliver_tap_skb net/netlink/af_netlink.c:298 [inline]
 __netlink_deliver_tap+0x5be/0xc90 net/netlink/af_netlink.c:325
 netlink_deliver_tap net/netlink/af_netlink.c:338 [inline]
 netlink_deliver_tap_kernel net/netlink/af_netlink.c:347 [inline]
 netlink_unicast_kernel net/netlink/af_netlink.c:1341 [inline]
 netlink_unicast+0x10f1/0x1250 net/netlink/af_netlink.c:1368
 netlink_sendmsg+0x1238/0x13d0 net/netlink/af_netlink.c:1910
 sock_sendmsg_nosec net/socket.c:730 [inline]
 __sock_sendmsg net/socket.c:745 [inline]
 ____sys_sendmsg+0x9c2/0xd60 net/socket.c:2584
 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638
 __sys_sendmsg net/socket.c:2667 [inline]
 __do_sys_sendmsg net/socket.c:2676 [inline]
 __se_sys_sendmsg net/socket.c:2674 [inline]
 __x64_sys_sendmsg+0x307/0x490 net/socket.c:2674
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

Uninit was created at:
 free_pages_prepare mm/page_alloc.c:1087 [inline]
 free_unref_page_prepare+0xb0/0xa40 mm/page_alloc.c:2347
 free_unref_page_list+0xeb/0x1100 mm/page_alloc.c:2533
 release_pages+0x23d3/0x2410 mm/swap.c:1042
 free_pages_and_swap_cache+0xd9/0xf0 mm/swap_state.c:316
 tlb_batch_pages_flush mm/mmu_gather.c:98 [inline]
 tlb_flush_mmu_free mm/mmu_gather.c:293 [inline]
 tlb_flush_mmu+0x6f5/0x980 mm/mmu_gather.c:300
 tlb_finish_mmu+0x101/0x260 mm/mmu_gather.c:392
 exit_mmap+0x49e/0xd30 mm/mmap.c:3321
 __mmput+0x13f/0x530 kernel/fork.c:1349
 mmput+0x8a/0xa0 kernel/fork.c:1371
 exit_mm+0x1b8/0x360 kernel/exit.c:567
 do_exit+0xd57/0x4080 kernel/exit.c:858
 do_group_exit+0x2fd/0x390 kernel/exit.c:1021
 __do_sys_exit_group kernel/exit.c:1032 [inline]
 __se_sys_exit_group kernel/exit.c:1030 [inline]
 __x64_sys_exit_group+0x3c/0x50 kernel/exit.c:1030
 do_syscall_x64 arch/x86/entry/common.c:52 [inline]
 do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

Bytes 3852-3903 of 3904 are uninitialized
Memory access of size 3904 starts at ffff88812ea1e000
Data copied to user address 0000000020003280

CPU: 1 PID: 5043 Comm: syz-executor297 Not tainted 6.7.0-rc5-syzkaller-00047-g5bd7ef53 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023

Fixes: 1853c949 ("netlink, mmap: transform mmap skb into full skb on taps")
Reported-and-tested-by: syzbot+34ad5fab48f7bf510349@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=34ad5fab48f7bf510349 [1]
Signed-off-by: default avatarRyosuke Yasuoka <ryasuoka@redhat.com>
Reviewed-by: default avatarEric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240221074053.1794118-1-ryasuoka@redhat.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      661779e1
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7