Now that we have GIGANTIC_PAGE enabled on powerpc, use this for 16G hugepages
with hash translation mode. Depending on the total system memory we have, we may
be able to allocate 16G hugepages runtime. This also remove the hugetlb setup
difference between hash/radix translation mode.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

With commit aa888a74 ("hugetlb: support larger than MAX_ORDER") we added
support for allocating gigantic hugepages via kernel command line. Switch
ppc64 arch specific code to use that.

W.r.t FSL support, we now limit our allocation range using BOOTMEM_ALLOC_ACCESSIBLE.

We use the kernel command line to do reservation of hugetlb pages on powernv
platforms. On pseries hash mmu mode the supported gigantic huge page size is
16GB and that can only be allocated with hypervisor assist. For pseries the
command line option doesn't do the allocation. Instead pseries does gigantic
hugepage allocation based on hypervisor hint that is specified via
"ibm,expected#pages" property of the memory node.

Cc: Scott Wood <oss@buserror.net>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

When running in guest mode ppc64 supports a different mechanism for hugetlb
allocation/reservation. The LPAR management application called HMC can
be used to reserve a set of hugepages and we pass the details of
reserved pages via device tree to the guest. (more details in
htab_dt_scan_hugepage_blocks()) . We do the memblock_reserve of the range
and later in the boot sequence, we add the reserved range to huge_boot_pages.

But to enable 16G hugetlb on baremetal config (when we are not running as guest)
we want to do memblock reservation during boot. Generic code already does this
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

gup_hugepte() checks if pages are present and readable, and
when  'write' is set, also checks if the pages are writable.

Initially this was done by checking if _PAGE_PRESENT and
_PAGE_READ were set. In addition, _PAGE_WRITE was verified for write
accesses.

The problem is that we have to handle the three following cases:
1/ The target defines __PAGE_READ and __PAGE_WRITE
2/ The target defines __PAGE_RW
3/ The target defines __PAGE_RO

In case 1/, this is obvious
In case 2/, __PAGE_READ is defined as 0 and __PAGE_WRITE as __PAGE_RW
so it works as well.
But in case 3, __PAGE_RW is defined as 0, which means __PAGE_WRITE is 0
and then the test returns true (page writable) in all cases.

A first correction was attempted in commit 6b8cb66a ("powerpc: Fix
usage of _PAGE_RO in hugepage"), but that fix is wrong:
instead of checking that the page is writable when write is requested,
it checks that the page is NOT writable when write is NOT requested.

This patch adds a new pte_read() helper to check whether a page is
readable or not. This avoids handling all possible cases in
gup_hugepte().

Then gup_hugepte() is modified to use pte_present(), pte_read()
and pte_write() instead of the raw flags.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

__set_fixmap() uses __fix_to_virt() then does the boundary checks
by it self. Instead, we can use fix_to_virt() which does the
verification at build time. For this, we need to use it inline
so that GCC can see the real value of idx at buildtime.

In the meantime, we remove the 'fixmaps' variable.
This variable is set but has never been used from the beginning
(commit 2c419bde ("[POWERPC] Port fixmap from x86 and use
for kmap_atomic"))
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

get_pteptr() and __mapin_ram_chunk() are only used locally,
so define them static
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This patch implements STRICT_KERNEL_RWX on PPC32.

As for CONFIG_DEBUG_PAGEALLOC, it deactivates BAT and LTLB mappings
in order to allow page protection setup at the level of each page.

As BAT/LTLB mappings are deactivated, there might be a performance
impact.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

As seen below, allthough the init sections have been freed, the
associated memory area is still marked as executable in the
page tables.

~ dmesg
[    5.860093] Freeing unused kernel memory: 592K (c0570000 - c0604000)

~ cat /sys/kernel/debug/kernel_page_tables
---[ Start of kernel VM ]---
0xc0000000-0xc0497fff        4704K  rw  X  present dirty accessed shared
0xc0498000-0xc056ffff         864K  rw     present dirty accessed shared
0xc0570000-0xc059ffff         192K  rw  X  present dirty accessed shared
0xc05a0000-0xc7ffffff      125312K  rw     present dirty accessed shared
---[ vmalloc() Area ]---

This patch fixes that.

The implementation is done by reusing the change_page_attr()
function implemented for CONFIG_DEBUG_PAGEALLOC
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

__change_page_attr() uses flush_tlb_page().
flush_tlb_page() uses tlbie instruction, which also invalidates
pinned TLBs, which is not what we expect.

This patch modifies the implementation to use flush_tlb_kernel_range()
instead. This will make use of tlbia which will preserve pinned TLBs.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This reduces the DTLB miss handler hot path (user address path)
by one instruction by preserving r10.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

setup_initial_memory_limit() is only called during init.
mmu_patch_cmp_limit() is only called from 8xx_mmu.c
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Pinning TLBs bypasses STRICT_KERNEL_RWX or DEBUG_PAGEALLOC protections
so it should only be allowed when those are not selected
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

As stated in a comment in head_8xx.S, today we "Always pin the first
8 MB ITLB to prevent ITLB misses while mucking around with SRR0/SRR1
in asm".

This issue has just been cleared by the preceding patch, therefore
we can make this pinning optional (on by default) and independent
of DATA pinning.

This patch also makes pinning of IMMR independent of pinning of DATA.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

By default, the 8xx pins an ITLB on the first 8M of memory in order
to avoid any ITLB miss on kernel code.
However, with some debug functions like DEBUG_PAGEALLOC and
DEBUG_RODATA, pinning TLBs is contradictory.

In order to avoid any ITLB miss in a critical section without pinning
TLBs, we have to ensure that there is no page boundary crossed between
the setup of a new value in SRR0/SRR1 and the associated RFI.

The functions modifying srr0/srr1 are all located in setup_32.S.
They are spread over almost 4kbytes.

The patch forces a 12 bits (4kbytes) alignment for those
functions. This garanties that the functions remain in a
single 4k page.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The macro to check if an address is a kernel address or not is
not used anymore in DTLBmiss handler. It is used in ITLB miss handler
and in DTLB error handler. DTLB error handler is not a hot path, it
doesn't need such optimisation.

In order to simplify a following patch which will rework ITLB miss
handler, we remove the macros and reintroduce them inside the handler.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

On the 8xx, the RAM mapped with LTLBs must be seen as block mapped,
just like areas mapped with BATs on standard PPC32.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Normally the values in the resource field and the argument to ARRAY_SIZE
in the num_resources are the same.  In this case, the value in the reousrce
field is the same as the one in the previous platform_device structure, and
appears to be a copy-paste error.  Replace the value in the resource field
with the argument to the local call to ARRAY_SIZE.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This fixes another invalid use of register expressions.
Signed-off-by: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

In iommu_range_alloc() we generate a mask by right shifting ~0,
however if the specified alignment is 0 then we right shift by 64,
which is undefined. UBSAN tells us so:

  UBSAN: Undefined behaviour in ../arch/powerpc/kernel/iommu.c:193:35
  shift exponent 64 is too large for 64-bit type 'long unsigned int'

We can avoid it by instead generating the mask with:

  align_mask = (1ull << align_order) - 1;

That will also generate an undefined shift if align_order is 64 or
greater, but that shouldn't be a problem for a while.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

In a multi node system with discontiguous node ids, nest event values
are not showing up properly. eg. lscpu output:

  NUMA node0 CPU(s): 0-15
  NUMA node8 CPU(s): 16-31

Nest event values on such systems can be counted on CPUs <= 15:

  $./perf stat -e 'nest_powerbus0_imc/PM_PB_CYC/' -C 0-14 -I 1000 sleep 1000
  #           time             counts unit events
       1.000294577    30,17,24,42,880 nest_powerbus0_imc/PM_PB_CYC/

But not on CPUs >= 16:

  $./perf stat -e 'nest_powerbus0_imc/PM_PB_CYC/' -C 16-28 -I 1000 sleep 1000
  #           time             counts unit events
       1.000049902    <not supported> nest_powerbus0_imc/PM_PB_CYC/

This is because, when fetching the reference count, the node id (which
may be sparse) is used as the array index, not the node number (which
is 0 based and contiguous).

Fix it by using the node number as the array index.

  $./perf stat -e 'nest_powerbus0_imc/PM_PB_CYC/' -C 16-28 -I 1000 sleep 1000
  #           time             counts unit events
       1.000241961    26,12,35,28,704 nest_powerbus0_imc/PM_PB_CYC/
Signed-off-by: Anju T Sudhakar <anju@linux.vnet.ibm.com>
[mpe: Change log tweaks for clarity and brevity]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

In some obscure Book3E configs (randconfig) we can end up missing a
definition for PGALLOC_GFP in pgtable_64.c.

Fix it by moving the definition to asm/pgalloc.h.

Fixes: de3b8761 ("powerpc/mm/book(e)(3s)/64: Add page table accounting")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Exclude core xmon files from ftrace (along with an xmon xive helper
outside of xmon/) to minimize impact of ftrace while within xmon.

Before:
  /sys/kernel/debug/tracing# grep -ci xmon available_filter_functions
  26

After:
  /sys/kernel/debug/tracing# grep -ci xmon available_filter_functions
  0
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
[mpe: Use $(subst ..) on KBUILD_CFLAGS rather than CFLAGS_REMOVE_xxx]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

If tracing is enabled and you get into xmon, the tracing buffer
continues to be updated, causing possible loss of data and unnecessary
tracing information coming from xmon functions.

This patch simple disables tracing when entering xmon, and re-enables it
if the kernel is resumed (with 'x').
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Current xmon 'dt' command dumps the tracing buffer for all the CPUs,
which makes it very hard to read due to the fact that most of
powerpc machines currently have many CPUs. Other than that, the CPU
lines are interleaved in the ftrace log.

This new option just dumps the ftrace buffer for the current CPU.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Make wf_control_ops const as they are only stored in the ops field of a
wf_control structure, which is const.
Make wf_pid_param const as they are only used during a copy operation.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This function is not called with the nest_init_lock held, and it also
unlocks the nest_init_lock immediately below, so it's fairly clear
that this is a typo and should be locking the lock.

Fixes: 885dcd70 ("powerpc/perf: Add nest IMC PMU support")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Commit 968159c0 ("powerpc/8xx: Getting rid of remaining use of
CONFIG_8xx") removed all but 2 references to 8xx in Kconfigs.

This patch removes the two remaining ones.

Fixes: 968159c0 ("powerpc/8xx: Getting rid of remaining use of CONFIG_8xx")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Both xive_core_init() and xive_native_init() are called from and call
__init routines, so they should also be __init.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

early_check_vec5() is called from and calls __init routines, so should
also be __init.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

head_8xx is dedicated to 8xx so no need to use macros that
depends on the CPU
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Use symbolic names for DSISR bits in DSI
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

For the 8xx, PVR values defined in arch/powerpc/include/asm/reg.h
are nowhere used.

Remove all defines and add PVR_8xx

Use it in arch/powerpc/kernel/cputable.c
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Two config options exist to define powerpc MPC8xx:
* CONFIG_PPC_8xx
* CONFIG_8xx

arch/powerpc/platforms/Kconfig.cputype has contained the following
comment about CONFIG_8xx item for some years:
"# this is temp to handle compat with arch=ppc"

There is no more users of CONFIG_8xx, so remove it.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Two config options exist to define powerpc MPC8xx:
* CONFIG_PPC_8xx
* CONFIG_8xx

arch/powerpc/platforms/Kconfig.cputype has contained the following
comment about CONFIG_8xx item for some years:
"# this is temp to handle compat with arch=ppc"

arch/powerpc is now the only place with remaining use of
CONFIG_8xx: get rid of them.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

4xx, CPM2 and 8xx cannot be selected at the same time, so
no need to test 8xx && !4xx && !CPM2. Testing 8xx is enough.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The 8xx cannot access the TBL and TBU registers using mfspr/mtspr
It must be accessed using mftb/mftbu

Due to this, there is a number of places with #ifdef CONFIG_8xx

This patch defines new macros MFTBL(x) and MFTBU(x) on the same model
as MFTB(x) and tries to make use of them as much as possible.

In arch/powerpc/include/asm/timex.h, we also remove the ifdef
for the asm() operands as the compiler doesn't mind unused operands
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

mpc8xx_pic.c is dedicated to the 8xx, so move it to platform/8xx
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

To remain consistent with what is done with CPM2, let's link
CPM1 related parts to CONFIG_CPM1 instead of CONFIG_8xx

When something depends on both CPM1 and CPM2 we associate it
with CONFIG_CPM
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Since commit aa42c69c ("[POWERPC] Add support for FP emulation
for the e300c2 core"), program_check_exception() can be called for
math emulation. In that case, 'reason' is 0.

On the 8xx, there is a Software Emulation interrupt which is
called for all unimplemented and illegal instructions. This
interrupt calls SoftwareEmulation() which does almost the
same as program_check_exception() called with reason = 0.

The Software Emulation interrupt sets all reason bits to 0,
it is therefore possible to call program_check_exception()
directly from the interrupt handler.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

In the same spirit as what was done for 4xx and 44x, move
the 8xx machine check into platforms/8xx
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>