- 05 Dec, 2023 33 commits
-
-
Paolo Abeni authored
Pedro Tammela says: ==================== net/sched: act_api: contiguous action arrays When dealing with action arrays in act_api it's natural to ask if they are always contiguous (no NULL pointers in between). Yes, they are in all cases so far, so make use of the already present tcf_act_for_each_action macro to explicitly document this assumption. There was an instance where it was not, but it was refactorable (patch 2) to make the array contiguous. v1->v2: - Respin - Added Jamal's acked-by ==================== Link: https://lore.kernel.org/r/20231201175015.214214-1-pctammela@mojatatu.comSigned-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Pedro Tammela authored
The actions array is contiguous, so stop processing whenever a NULL is found. This is already the assumption for tcf_action_destroy[1], which is called from tcf_actions_init. [1] https://elixir.bootlin.com/linux/v6.7-rc3/source/net/sched/act_api.c#L1115Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
Pedro Tammela <pctammela@mojatatu.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Pedro Tammela authored
The ops array is contiguous, so stop processing whenever a NULL is found Acked-by:
-
Pedro Tammela authored
In tcf_action_add, when putting the reference for the bound actions it assigns NULLs to just created actions passing a non contiguous array to tcf_action_put_many. Refactor the code so the actions array is always contiguous. Acked-by:
-
Pedro Tammela authored
Use the auxiliary macro tcf_act_for_each_action in all the functions that expect a contiguous action array Suggested-by:
Marcelo Ricardo Leitner <mleitner@redhat.com> Acked-by:
-
Paolo Abeni authored
Hangbin Liu says: ==================== Doc: update bridge doc The current bridge kernel doc is too old. It only pointed to the linuxfoundation wiki page which lacks of the new features. Here let's start the new bridge document and put all the bridge info so new developers and users could catch up the last bridge status soon. v3 -> v4: - Patch01: Reference and borrow definitions from the IEEE 802.1Q-2022 standard for bridge (Stephen Hemminger) - Patch04: Remind that kAPI is unstable. Add back sysfs part, but only note that sysfs is deprecated. (Stephen Hemminger, Florian Fainelli) - Patch05: Mention the RSTP and IEEE 802.1D developing info. (Stephen Hemminger) - Some other grammar fixes. v2 -> v3: - Split the bridge doc update and adding kAPI/uAPI field to 2 part (Nikolay Aleksandrov) - Update bridge and bridge enum descriptions (Nikolay Aleksandrov) - Add user space stp help for STP doc (Vladimir Oltean) v1 -> v2: - Update bridge and bridge port enum descriptions (Vladimir Oltean) RFCv3 -> v1: - Fix up various typos, grammar and technical issues (Nikolay Aleksandrov) RFCv2 -> RFCv3: - Update netfilter part (Florian Westphal) - Break the one large patch in to multiparts for easy reviewing. Please tell me if I break it too much.. (Nikolay Aleksandrov) - Update the description of each enum and doc (Nikolay Aleksandrov) - Add more descriptions for STP/Multicast/VLAN. RFCv1 -> RFCv2: - Drop the python tool that generate iproute man page from kernel doc ==================== Link: https://lore.kernel.org/r/20231201081951.1623069-1-liuhangbin@gmail.comSigned-off-by: -
Hangbin Liu authored
Add some features that are not appropriate for the existing section to the "Others" part of the bridge document. Acked-by:
Nikolay Aleksandrov <razor@blackwall.org> Reviewed-by:
Florian Fainelli <florian.fainelli@broadcom.com> Signed-off-by:
Hangbin Liu <liuhangbin@gmail.com> Signed-off-by:
-
Hangbin Liu authored
Add netfilter part for bridge document. Reviewed-by:
Florian Westphal <fw@strlen.de> Reviewed-by:
-
Hangbin Liu authored
Add switchdev part for bridge document. Reviewed-by:
Vladimir Oltean <olteanv@gmail.com> Reviewed-by:
-
Hangbin Liu authored
Add multicast part for bridge document. Acked-by:
-
Hangbin Liu authored
Add VLAN part for bridge document. Acked-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Hangbin Liu authored
Add STP part for bridge document. Reviewed-by:
-
Hangbin Liu authored
Add kAPI/uAPI field for bridge doc. Update struct net_bridge_vlan comments to fix doc build warning. Reviewed-by:
-
Hangbin Liu authored
Add document for IFLA_BRPORT enum so we can use it in Documentation/networking/bridge.rst. Signed-off-by:
-
Hangbin Liu authored
Add document for IFLA_BR enum so we can use it in Documentation/networking/bridge.rst. Signed-off-by:
-
Hangbin Liu authored
The current bridge kernel doc is too old. It only pointed to the linuxfoundation wiki page which lacks of the new features. Here let's start the new bridge document and put all the bridge info so new developers and users could catch up the last bridge status soon. In this patch, Convert the doc to rst format. Add bridge brief introduction, FAQ and contact info. Reviewed-by:
-
Jakub Kicinski authored
Rohan G Thomas says: ==================== net: stmmac: EST implementation This patchset extends EST interrupt handling support to DWXGMAC IP followed by refactoring of EST implementation. Added a separate module for EST and moved all EST related functions to the new module. Also added support for EST cycle-time-extension. ==================== Link: https://lore.kernel.org/r/20231201055252.1302-1-rohan.g.thomas@intel.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Rohan G Thomas authored
Add support for cycle-time-extension. TER GCL-register needs to be updated with the cycle-time-extension. Width of TER register is EST time interval width + 7 bits. Signed-off-by:
Rohan G Thomas <rohan.g.thomas@intel.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20231201055252.1302-4-rohan.g.thomas@intel.comSigned-off-by:
-
Rohan G Thomas authored
Refactor EST implementation by moving common code for DWMAC4 and DWXGMAC IPs into a separate EST module. EST implementation for DWMAC4 and DWXGMAC differs only for CSR base address, PTOV field offset width, and PTOV clock multiplier value. Thanks, Serge Semin and Jakub Kicinski for the suggestions on refactoring EST implementation into a separate EST module. Signed-off-by:
-
Rohan G Thomas authored
Enabled the following EST related interrupts: 1) Constant Gate Control Error (CGCE) 2) Head-of-Line Blocking due to Scheduling (HLBS) 3) Head-of-Line Blocking due to Frame Size (HLBF) 4) Base Time Register error (BTRE) 5) Switch to S/W owned list Complete (SWLC) Also, add EST errors into the ethtool statistic. The commit e49aa315 ("net: stmmac: EST interrupts handling and error reporting") and commit 9f298959 ("net: stmmac: Add EST errors into ethtool statistic") add EST interrupts handling and error reporting support to DWMAC4 core. This patch enables the same support for XGMAC. Signed-off-by:
-
Ravi Gunasekaran authored
The errata i2329 affects all the currently available silicon revisions of AM62x, AM64x, AM65x, J7200, J721E and J721S2. So remove the revision string from the SoC list. The silicon revisions affected by the errata i2329 can be found under the MDIO module in the "Advisories by Modules" section of each SoC errata document listed below AM62x: https://www.ti.com/lit/er/sprz487c/sprz487c.pdf AM64X: https://www.ti.com/lit/er/sprz457g/sprz457g.pdf AM65X: https://www.ti.com/lit/er/sprz452i/sprz452i.pdf J7200: https://www.ti.com/lit/er/sprz491d/sprz491d.pdf J721E: https://www.ti.com/lit/er/sprz455d/sprz455d.pdf J721S2: https://www.ti.com/lit/er/sprz530b/sprz530b.pdfSigned-off-by:
Ravi Gunasekaran <r-gunasekaran@ti.com> Reviewed-by:
Nishanth Menon <nm@ti.com> Link: https://lore.kernel.org/r/20231201132033.29576-1-r-gunasekaran@ti.comSigned-off-by:
-
Jakub Kicinski authored
Amritha Nambiar says: ==================== Introduce queue and NAPI support in netdev-genl (Was: Introduce NAPI queues support) Add the capability to export the following via netdev-genl interface: - queue information supported by the device - NAPI information supported by the device Introduce support for associating queue and NAPI instance. Extend the netdev_genl generic netlink family for netdev with queue and NAPI data. The queue parameters exposed are: - queue index - queue type - ifindex - NAPI id associated with the queue Additional rx and tx queue parameters can be exposed in follow up patches by stashing them in netdev queue structures. XDP queue type can also be supported in future. The NAPI fields exposed are: - NAPI id - NAPI device ifindex - Interrupt number associated with the NAPI instance - PID for the NAPI thread This series only supports 'get' ability for retrieving certain queue and NAPI attributes. The 'set' ability for configuring queue and associated NAPI instance via netdev-genl will be submitted as a separate patch series. Previous discussion at: https://lore.kernel.org/netdev/c8476530638a5f4381d64db0e024ed49c2db3b02.camel@gmail.com/T/#m00999652a8b4731fbdb7bf698d2e3666c65a60e7 $ ./cli.py --spec netdev.yaml --do queue-get --json='{"ifindex": 12, "id": 0, "type": 0}' {'id': 0, 'ifindex': 12, 'napi-id': 593, 'type': 'rx'} $ ./cli.py --spec netdev.yaml --do queue-get --json='{"ifindex": 12, "id": 0, "type": 1}' {'id': 0, 'ifindex': 12, 'napi-id': 593, 'type': 'tx'} $ ./cli.py --spec netdev.yaml --dump queue-get --json='{"ifindex": 12}' [{'id': 0, 'ifindex': 12, 'napi-id': 593, 'type': 'rx'}, {'id': 1, 'ifindex': 12, 'napi-id': 594, 'type': 'rx'}, {'id': 2, 'ifindex': 12, 'napi-id': 595, 'type': 'rx'}, {'id': 3, 'ifindex': 12, 'napi-id': 596, 'type': 'rx'}, {'id': 0, 'ifindex': 12, 'napi-id': 593, 'type': 'tx'}, {'id': 1, 'ifindex': 12, 'napi-id': 594, 'type': 'tx'}, {'id': 2, 'ifindex': 12, 'napi-id': 595, 'type': 'tx'}, {'id': 3, 'ifindex': 12, 'napi-id': 596, 'type': 'tx'}] $ ./cli.py --spec netdev.yaml --do napi-get --json='{"id": 593}' {'id': 593, 'ifindex': 12, 'irq': 291, 'pid': 3727} $ ./cli.py --spec netdev.yaml --dump napi-get --json='{"ifindex": 12}' [{'id': 596, 'ifindex': 12, 'irq': 294, 'pid': 3724}, {'id': 595, 'ifindex': 12, 'irq': 293, 'pid': 3725}, {'id': 594, 'ifindex': 12, 'irq': 292, 'pid': 3726}, {'id': 593, 'ifindex': 12, 'irq': 291, 'pid': 3727}] ==================== Link: https://lore.kernel.org/r/170147307026.5260.9300080745237900261.stgit@anambiarhost.jf.intel.comSigned-off-by:
-
Jakub Kicinski authored
Make bnxt compatible with the newly added netlink queue GET APIs. Signed-off-by:
Amritha Nambiar <amritha.nambiar@intel.com> Reviewed-by:
Michael Chan <michael.chan@broadcom.com> Link: https://lore.kernel.org/r/170147336340.5260.6773000274196548907.stgit@anambiarhost.jf.intel.comSigned-off-by:
-
Amritha Nambiar authored
In the threaded NAPI mode, expose the PID of the NAPI thread. Signed-off-by:
Sridhar Samudrala <sridhar.samudrala@intel.com> Link: https://lore.kernel.org/r/170147335818.5260.10253384006102593087.stgit@anambiarhost.jf.intel.comSigned-off-by:
-
Amritha Nambiar authored
Add support in netlink spec(netdev.yaml) for PID of the NAPI thread. Add code generated from the spec. Signed-off-by:
-
Amritha Nambiar authored
Add support to associate the interrupt vector number for a NAPI instance. Signed-off-by:
-
Amritha Nambiar authored
Add support in netlink spec(netdev.yaml) for interrupt number among the NAPI attributes. Add code generated from the spec. Signed-off-by:
-
Amritha Nambiar authored
Implement the netdev netlink framework functions for napi support. The netdev structure tracks all the napi instances and napi fields. The napi instances and associated parameters can be retrieved this way. Signed-off-by:
-
Amritha Nambiar authored
Add support in netlink spec(netdev.yaml) for napi related information. Add code generated from the spec. Signed-off-by:
-
Amritha Nambiar authored
Implement the netdev netlink framework functions for exposing queue information. Signed-off-by:
-
Amritha Nambiar authored
After the napi context is initialized, map the napi instance with the queue/queue-set on the corresponding irq line. Signed-off-by:
-
Amritha Nambiar authored
Add the napi pointer in netdev queue for tracking the napi instance for each queue. This achieves the queue<->napi mapping. Signed-off-by:
-
Amritha Nambiar authored
Add support in netlink spec(netdev.yaml) for queue information. Add code generated from the spec. Note: The "queue-type" attribute takes values 0 and 1 for rx and tx queue type respectively. Signed-off-by:
-
- 04 Dec, 2023 7 commits
-
-
Jakub Kicinski authored
Michael Chan says: ==================== bnxt_en: Support new 5760X P7 devices This series completes the basic support for the new 5760X P7 devices with new PCI IDs added in the last patch. Thie first patch fixes a backing store issue introduced in the last patchset last week. The 2nd patch is the new firmware interface required to support the new chips. The next few patches are doorbell changes, refactoring, and new hardware interface structures. New changes to support packet reception including TPA are added in patch 10. The next 4 patches are ethernet link related changes to support the new chip. ==================== Link: https://lore.kernel.org/r/20231201223924.26955-1-michael.chan@broadcom.comSigned-off-by:
-
Michael Chan authored
Now with basic support for the new chip family, add the PCI IDs of the new devices. Reviewed-by:
Andy Gospodarek <gospo@broadcom.com> Signed-off-by:
-
Michael Chan authored
Add new look up entries to convert the new supported speeds, advertised speeds, etc to ethtool link modes. Reviewed-by:
Damodharam Ammepalli <damodharam.ammepalli@broadcom.com> Signed-off-by:
-
Michael Chan authored
Modify bnxt_force_link_speed() to support the new speeds stored in link_info->support_speeds2, including the new 400G speed. Reviewed-by:
Ajit Khaparde <ajit.khaparde@broadcom.com> Signed-off-by:
-
Michael Chan authored
Newer firmware supporting PAM4 112Gbps speeds use new parameters in firmware message structures. Detect the new firmware capability and add basic logic to report and store these new fields. Reviewed-by:
Hongguang Gao <hongguang.gao@broadcom.com> Reviewed-by:
-
Michael Chan authored
Add helper functions to refactor the logic that converts firmware speed masks to ethtool speeds. Pass the phy_flags to bnxt_get_ethtool_speeds() and the call chain. The refactoring and the phy_flags will be needed when adding support for the new speeds in the next patches. Reviewed-by:
-
Michael Chan authored
These new completion types are supported on the new P7 chips. These new types have commonalities with the legacy types. After the refactoring, we mainly have to add new functions to handle the the new meta data formats and the RX hash information in the new types. Signed-off-by:
-
