- 03 Mar, 2020 1 commit
-
-
Jack Yu authored
Modify pre-divider for system clock. Signed-off-by: Jack Yu <jack.yu@realtek.com> Link: https://lore.kernel.org/r/20200303025913.24499-1-jack.yu@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 02 Mar, 2020 1 commit
-
-
Jack Yu authored
Add operation callback function for rt1015_dai[]. Signed-off-by: Jack Yu <jack.yu@realtek.com> Link: https://lore.kernel.org/r/20200302015424.9075-1-jack.yu@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 28 Feb, 2020 2 commits
-
-
Kuninori Morimoto authored
commit 1e5ddb6b ("ASoC: component: Add sync_stop PCM ops") added snd_soc_pcm_component_sync_stop(), but it is checking ioctrl instead of sync_stop. This is bug. This patch fixup it. Fixes: commit 1e5ddb6b ("ASoC: component: Add sync_stop PCM ops") Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/8736av7a8c.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Charles Keepax authored
commit c2caa4da ("ASoC: Fix widget powerdown on shutdown") added a set of the power state during snd_soc_dapm_shutdown to ensure the widgets powered off. However, when commit 39eb5fd1 ("ASoC: dapm: Delay w->power update until the changes are written") added the new_power member of the widget structure, to differentiate between the current power state and the target power state, it did not update the shutdown to use the new_power member. As new_power has not updated it will be left in the state set by the last DAPM sequence, ie. 1 for active widgets. So as the DAPM sequence for the shutdown proceeds it will turn the widgets on (despite them already being on) rather than turning them off. Fixes: 39eb5fd1 ("ASoC: dapm: Delay w->power update until the changes are written") Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20200228153145.21013-1-ckeepax@opensource.cirrus.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 26 Feb, 2020 1 commit
-
-
Dan Murphy authored
Fix error message for setting the sample rate. It says bitwidth but should say sample rate. Signed-off-by: Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20200226130305.12043-3-dmurphy@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 24 Feb, 2020 2 commits
-
-
Amadeusz Sławiński authored
Incrementation of avail_clk_cnt was incorrectly moved to error path. Put it back to success path. Fixes: 6ee927f2 ('ASoC: Intel: Skylake: Fix NULL ptr dereference when unloading clk dev') Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com> Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200224125202.13784-1-amadeuszx.slawinski@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Kuninori Morimoto authored
commit b0edff42 ("ASoC: soc-pcm/soc-compress: use snd_soc_dapm_stream_stop() for SND_SOC_DAPM_STREAM_STOP") uses snd_soc_dapm_stream_stop() for soc_compr_free_fe() and dpcm_fe_dai_shutdown() because it didn't care about pmdown_time. But, it didn't need to care. This patch rollback to original code. Some system will wait unneeded timed-out without this patch. Special Thanks for reporting to Chris Gorman. ... intel_sst_acpi 808622A8:00: Wait timed-out condition:0x0, msg_id:0x1 fw_state 0x3 intel_sst_acpi 808622A8:00: fw returned err -16 sst-mfld-platform sst-mfld-platform: ASoC: PRE_PMD: pcm0_in event failed: -16 ... Fixes: commit b0edff42 ("ASoC: soc-pcm/soc-compress: use snd_soc_dapm_stream_stop() for SND_SOC_DAPM_STREAM_STOP") Reported-by: Chris Gorman <chrisjohgorman@gmail.com> Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/87lfowspeb.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 21 Feb, 2020 1 commit
-
-
Jerome Brunet authored
Reset the g12a hdmi codec glue on probe. This ensure a sane startup state. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20200221121146.1498427-1-jbrunet@baylibre.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 20 Feb, 2020 2 commits
-
-
Matthias Reichl authored
When we get a clock error during probe we have to call regulator_bulk_disable before bailing out, otherwise we trigger a warning in regulator_put. Fix this by using "goto err" like in the error cases above. Fixes: 5a3af129 ("ASoC: pcm512x: Add PCM512x driver") Signed-off-by: Matthias Reichl <hias@horus.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200220202956.29233-1-hias@horus.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Pierre-Louis Bossart authored
The use of parentheses to protect the argument is fine for (i)++ but not for (--i). Fixes: 83f94a2e ("ASoC: soc-core: add snd_soc_close_delayed_work()") Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Link: https://lore.kernel.org/r/20200219222130.29933-1-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 19 Feb, 2020 5 commits
-
-
Dragos Tarcatu authored
In case of ABI version mismatch, _manifest needs to be freed as it is just a copy of the original topology manifest. However, if a driver manifest handler is defined, that would get executed and the cleanup is never reached. Fix that by getting the return status of manifest() instead of returning directly. Fixes: 583958fa ("ASoC: topology: Make manifest backward compatible from ABI v4") Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com> Link: https://lore.kernel.org/r/20200207185325.22320-3-dragos_tarcatu@mentor.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Dragos Tarcatu authored
If soc_tplg_link_config() fails, _link needs to be freed in case of topology ABI version mismatch. However the current code is returning directly and ends up leaking memory in this case. This patch fixes that. Fixes: 593d9e52 ("ASoC: topology: Add support to configure existing physical DAI links") Signed-off-by: Dragos Tarcatu <dragos_tarcatu@mentor.com> Link: https://lore.kernel.org/r/20200207185325.22320-2-dragos_tarcatu@mentor.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Takashi Iwai authored
dpcm_show_state() invokes multiple snprintf() calls to concatenate formatted strings on the fixed size buffer. The usage of snprintf() is supposed for avoiding the buffer overflow, but it doesn't work as expected because snprintf() doesn't return the actual output size but the size to be written. Fix this bug by replacing all snprintf() calls with scnprintf() calls. Fixes: f86dcef8 ("ASoC: dpcm: Add debugFS support for DPCM") Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20200218111737.14193-4-tiwai@suse.deSigned-off-by: Mark Brown <broonie@kernel.org>
-
Takashi Iwai authored
The debugfs output of intel skl driver writes strings with multiple snprintf() calls with the fixed size. This was supposed to avoid the buffer overflow but actually it still would, because snprintf() returns the expected size to be output, not the actual output size. Fix it by replacing snprintf() calls with scnprintf(). Fixes: d14700a0 ("ASoC: Intel: Skylake: Debugfs facility to dump module config") Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20200218111737.14193-3-tiwai@suse.deSigned-off-by: Mark Brown <broonie@kernel.org>
-
Takashi Iwai authored
skl_print_pins() loops over all given pins but it overwrites the text at the very same position while increasing the returned length. Fix this to show the all pin contents properly. Fixes: d14700a0 ("ASoC: Intel: Skylake: Debugfs facility to dump module config") Signed-off-by: Takashi Iwai <tiwai@suse.de> Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> Link: https://lore.kernel.org/r/20200218111737.14193-2-tiwai@suse.deSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 18 Feb, 2020 1 commit
-
-
Dan Murphy authored
If the bitwidth passed in to the set_bitwidth function is not supported then return an error. Fixes: 29b74236bd57 ("ASoC: tas2562: Introduce the TAS2562 amplifier") Signed-off-by: Dan Murphy <dmurphy@ti.com> Link: https://lore.kernel.org/r/20200218185252.26290-1-dmurphy@ti.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 17 Feb, 2020 3 commits
-
-
Samuel Holland authored
Use the correct mask for this two-bit field. This fixes setting the DAI data format to RIGHT_J or DSP_A. Fixes: 36c68493 ("ASoC: Add sun8i digital audio codec") Signed-off-by: Samuel Holland <samuel@sholland.org> Acked-by: Chen-Yu Tsai <wens@csie.org> Cc: stable@kernel.org Link: https://lore.kernel.org/r/20200217064250.15516-7-samuel@sholland.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
Ravulapati Vishnu vardhan rao authored
Removed this logic because It is BIOS which needs to power off the ACP power domian through ACP_PGFSM_CTRL register when you De-initialize ACP Engine. Signed-off-by: Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com> Link: https://lore.kernel.org/r/1581935964-15059-1-git-send-email-Vishnuvardhanrao.Ravulapati@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Tzung-Bi Shih authored
Sets plugged_cb to NULL when component removing to notify its consumers : no further plugged status report is required. Signed-off-by: Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20200217105513.1.Icc323daaf71ad02f191fd8d91136b01b61eca5e3@changeidSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 14 Feb, 2020 2 commits
-
-
Tzung-Bi Shih authored
Reverts commit 839284e7 ("ASoC: dapm: add snd_soc_dapm_put_enum_double_locked"). Signed-off-by: Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20200214105744.82258-3-tzungbi@google.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Tzung-Bi Shih authored
Reverts commit 62d5ae4c ("ASoC: max98090: save and restore SHDN when changing sensitive registers"). A critical side-effect was observed: when keep playing something, the recorded sound has chance to break (clipping). Signed-off-by: Tzung-Bi Shih <tzungbi@google.com> Link: https://lore.kernel.org/r/20200214105744.82258-2-tzungbi@google.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 13 Feb, 2020 1 commit
-
-
Samuel Holland authored
The PCM runtime was freed during PMU in the case that the event hook encountered an error. However, it is also unconditionally freed during PMD. Avoid a double-free by dropping the call to kfree in the PMU hook. Fixes: a72706ed ("ASoC: codec2codec: remove ephemeral variables") Cc: stable@vger.kernel.org Signed-off-by: Samuel Holland <samuel@sholland.org> Link: https://lore.kernel.org/r/20200213061147.29386-2-samuel@sholland.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 12 Feb, 2020 1 commit
-
-
Ravulapati Vishnu vardhan rao authored
Because of MAX BUFFER size in register,when user/app give small buffer size produces noise of old data in buffer. This patch rectifies this noise when using different buffer sizes less than MAX BUFFER. Signed-off-by: Ravulapati Vishnu vardhan rao <Vishnuvardhanrao.Ravulapati@amd.com> Link: https://lore.kernel.org/r/1581426768-8937-1-git-send-email-Vishnuvardhanrao.Ravulapati@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 10 Feb, 2020 4 commits
-
-
Kai Vehmanen authored
To be compliant with i915 display driver requirements, i915 power-up must be done before any HDA communication takes place, including parsing the bus capabilities. Otherwise the initial codec probe may fail. Move i915 initialization earlier in the SOF HDA sequence. This sequence is now aligned with the snd-hda-intel driver where the display_power() call is before snd_hdac_bus_parse_capabilities() and rest of the capability parsing. Also remove unnecessary ifdef around hda_codec_i915_init(). There's a dummy implementation provided if CONFIG_SND_SOC_SOF_HDA is not enabled. Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20200206200223.7715-3-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Kai Vehmanen authored
When HDA controller is resumed from suspend, i915 HDMI/DP codec requires that following order of actions is kept: - i915 display power up and configuration of link params - hda link reset and setup Current SOF HDA code delegates display codec power control to the codec driver. This works most of the time, but in runtime PM sequences, the above constraint may be violated. On platforms where BIOS values for HDA link parameters do not match hardware reset defaults, this may lead to errors in HDA verb transactions after resume. Fix the issue by explicitly powering the display codec in the HDA controller resume/suspend calls, thus ensuring correct ordering. Special handling is needed for the D0i3 flow, where display power must be turned off even though DSP is left powered. Now that we have more invocations of the display power helper functions, the conditional checks surrounding each call have been moved inside hda_codec_i915_display_power(). The two special cases of display powering at initial probe are handled separately. The intent is to avoid powering the display whenever no display codecs are used. Note that early powering of display was removed in commit 687ae9e2 ("ASoC: intel: skl: Fix display power regression"). This change was also copied to the SOF driver. No failures have resulted as hardware default values for link parameters have worked out of the box. However with recent i915 driver changes like done in commit 87c16945 ("drm/i915: save AUD_FREQ_CNTRL state at audio domain suspend"), this does not hold anymore and errors are hit. Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20200206200223.7715-2-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Kai Vehmanen authored
snd_hdac_ext_bus_link_get() does not work correctly in case there are multiple codecs on the bus. It unconditionally resets the bus->codec_mask value. As per documentation in hdaudio.h and existing use in client code, this field should be used to store bit flag of detected codecs on the bus. By overwriting value of the codec_mask, information on all detected codecs is lost. No current user of hdac is impacted, but use of bus->codec_mask is planned in future patches for SOF. Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20200206200223.7715-1-kai.vehmanen@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Arnd Bergmann authored
The ssc audio driver can call into both pdc and dma backends. With the latest rework, the logic to do this in a safe way avoiding link errors was removed, bringing back link errors that were fixed long ago in commit 061981ff ("ASoC: atmel: properly select dma driver state") such as sound/soc/atmel/atmel_ssc_dai.o: In function `atmel_ssc_set_audio': atmel_ssc_dai.c:(.text+0xac): undefined reference to `atmel_pcm_pdc_platform_register' Fix it this time using Makefile hacks and a comment to prevent this from accidentally getting removed again rather than Kconfig hacks. Fixes: 18291410 ("ASoC: atmel: enable SOC_SSC_PDC and SOC_SSC_DMA in Kconfig") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com> Link: https://lore.kernel.org/r/20200130130545.31148-1-codrin.ciubotariu@microchip.comReviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Mark Brown <broonie@kernel.org>
-
- 06 Feb, 2020 1 commit
-
-
Oleksandr Suvorov authored
If the imx-sdma driver is built as a module, the fsl-sai device doesn't disable on probing failure, which causes the warning in the next probing: ================================================================== fsl-sai 308a0000.sai: Unbalanced pm_runtime_enable! fsl-sai 308a0000.sai: Unbalanced pm_runtime_enable! fsl-sai 308a0000.sai: Unbalanced pm_runtime_enable! fsl-sai 308a0000.sai: Unbalanced pm_runtime_enable! fsl-sai 308a0000.sai: Unbalanced pm_runtime_enable! fsl-sai 308a0000.sai: Unbalanced pm_runtime_enable! ================================================================== Disabling the device properly fixes the issue. Fixes: 812ad463 ("ASoC: fsl_sai: Add support for runtime pm") Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com> Link: https://lore.kernel.org/r/20200205160436.3813642-1-oleksandr.suvorov@toradex.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 05 Feb, 2020 1 commit
-
-
Geert Uytterhoeven authored
Just adding a dependency on COMMON_CLK to SND_SOC_WCD934X is not sufficient, as enabling SND_SOC_ALL_CODECS will still select it, breaking the build later: WARNING: unmet direct dependencies detected for SND_SOC_WCD934X Depends on [n]: SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && COMMON_CLK [=n] && MFD_WCD934X [=m] Selected by [m]: - SND_SOC_ALL_CODECS [=m] && SOUND [=m] && !UML && SND [=m] && SND_SOC [=m] && COMPILE_TEST [=y] && MFD_WCD934X [=m] ... ERROR: "of_clk_add_provider" [sound/soc/codecs/snd-soc-wcd934x.ko] undefined! ERROR: "of_clk_src_simple_get" [sound/soc/codecs/snd-soc-wcd934x.ko] undefined! ERROR: "clk_hw_register" [sound/soc/codecs/snd-soc-wcd934x.ko] undefined! ERROR: "__clk_get_name" [sound/soc/codecs/snd-soc-wcd934x.ko] undefined! Fix this by adding the missing dependency to SND_SOC_ALL_CODECS Fixes: 42b71635 ("ASoC: wcd934x: Add missing COMMON_CLK dependency") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Tested-by: Stephen Rothwell <sfr@canb.auug.org.au> Link: https://lore.kernel.org/r/20200204131857.7634-1-geert@linux-m68k.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 04 Feb, 2020 2 commits
-
-
Srinivas Kandagatla authored
Looks like some platforms are not yet using COMMON CLK. PowerPC allyesconfig failed with below error in next ld: sound/soc/codecs/wcd934x.o:(.toc+0x0): undefined reference to `of_clk_src_simple_get' ld: sound/soc/codecs/wcd934x.o: in function `.wcd934x_codec_probe': wcd934x.c:(.text.wcd934x_codec_probe+0x3d4): undefined reference to `.__clk_get_name' ld: wcd934x.c:(.text.wcd934x_codec_probe+0x438): undefined reference to `.clk_hw_register' ld: wcd934x.c:(.text.wcd934x_codec_probe+0x474): undefined reference to `.of_clk_add_provider' Add the missing COMMON_CLK dependency to fix this errors. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20200204111241.6927-1-srinivas.kandagatla@linaro.orgSigned-off-by: Mark Brown <broonie@kernel.org>
-
Oder Chiou authored
Remove the maintainer "Bard Liao" since he had quitted from Realtek. Signed-off-by: Oder Chiou <oder_chiou@realtek.com> Link: https://lore.kernel.org/r/3ae27357f98a406a958304386a1457bc@realtek.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 02 Feb, 2020 2 commits
-
-
Jon Hunter authored
Commit f3ee9908 ("ASoC: tegra: Allow 24bit and 32bit samples") added 24-bit and 32-bit support for to the Tegra30 I2S driver. However, there are two additional commits that are also needed to get 24-bit and 32-bit support to work correctly. These commits are not yet applied because there are still some review comments that need to be addressed. With only this change applied, 24-bit and 32-bit support is advertised by the I2S driver, but it does not work and the audio is distorted. Therefore, revert this patch for now until the other changes are also ready. Furthermore, a clock issue with 24-bit support has been identified with this change and so if we revert this now, we can also fix that in the updated version. Reported-by: Dmitry Osipenko <digetx@gmail.com> Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Tested-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20200131091901.13014-1-jonathanh@nvidia.comSigned-off-by: Mark Brown <broonie@kernel.org> Cc: stable@vger.kernel.org
-
Yong Zhi authored
Mirror ID added for legacy HDaudio. Signed-off-by: Yong Zhi <yong.zhi@intel.com> Signed-off-by: Divagar Mohandass <divagar.mohandass@intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200131204032.10213-1-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 29 Jan, 2020 5 commits
-
-
Takashi Iwai authored
Fix the compile warnings by adding __maybe_unused to PM callbacks: sound/soc/codecs/rt715-sdw.c:566:12: warning: ‘rt715_dev_resume’ defined but not used [-Wunused-function] sound/soc/codecs/rt715-sdw.c:552:12: warning: ‘rt715_dev_suspend’ defined but not used [-Wunused-function] Fixes: d1ede064 ("ASoC: rt715: add RT715 codec driver") Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20200127192831.14057-5-tiwai@suse.deSigned-off-by: Mark Brown <broonie@kernel.org>
-
Takashi Iwai authored
Fix the compile warnings by adding __maybe_unused to PM callbacks: sound/soc/codecs/rt711-sdw.c:504:12: warning: ‘rt711_dev_resume’ defined but not used [-Wunused-function] sound/soc/codecs/rt711-sdw.c:490:12: warning: ‘rt711_dev_suspend’ defined but not used [-Wunused-function] Fixes: 320b8b0d ("ASoC: rt711: add rt711 codec driver") Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20200127192831.14057-4-tiwai@suse.deSigned-off-by: Mark Brown <broonie@kernel.org>
-
Takashi Iwai authored
Fix the compile warnings by adding __maybe_unused to PM callbacks: sound/soc/codecs/rt700-sdw.c:503:12: warning: ‘rt700_dev_resume’ defined but not used [-Wunused-function] sound/soc/codecs/rt700-sdw.c:489:12: warning: ‘rt700_dev_suspend’ defined but not used [-Wunused-function] Fixes: 7d2a5f9a ("ASoC: rt700: add rt700 codec driver") Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20200127192831.14057-3-tiwai@suse.deSigned-off-by: Mark Brown <broonie@kernel.org>
-
Takashi Iwai authored
Fix the compile warnings by adding __maybe_unused to PM callbacks: sound/soc/codecs/rt1308-sdw.c:690:12: warning: ‘rt1308_dev_resume’ defined but not used [-Wunused-function] sound/soc/codecs/rt1308-sdw.c:676:12: warning: ‘rt1308_dev_suspend’ defined but not used [-Wunused-function] Fixes: a87a6653 ("ASoC: rt1308-sdw: add rt1308 SdW amplifier driver") Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://lore.kernel.org/r/20200127192831.14057-2-tiwai@suse.deSigned-off-by: Mark Brown <broonie@kernel.org>
-
Akshu Agrawal authored
Stopping of one stream is killing the other stream when they are running simultaneously. This is because, IER register is cleared which disables I2S and overrides any other block enables. Clearing IER register only when all streams on a channel are disabled, fixes the issue. Signed-off-by: Akshu Agrawal <akshu.agrawal@amd.com> Link: https://lore.kernel.org/r/20200128103029.128841-1-akshu.agrawal@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
- 27 Jan, 2020 2 commits
-
-
Guennadi Liakhovetski authored
Multiple Intel ASoC machine drivers repeat the same pattern in their .late_probe() methods: they first check whether the common HDMI codec driver is used, if not, they proceed by linking the legacy HDMI driver to each HDMI port. While doing that they use some inconsistent code: 1. after the loop they check, whether the list contained at least one element and if not, they return an error. However, the earlier code to use the common HDMI driver uses the first element of the same list without checking. To fix this we move the check to the top of the function. 2. some of those .late_probe() implementations execute code, only needed for the common HDMI driver, before checking, whether the driver is used. Move the code to after the check. 3. Some of those functions also perform a redundant initialisation of the "err" variable. This patch fixes those issues. Signed-off-by: Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200124213625.30186-8-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>
-
Bard Liao authored
Fix the part id of rt715 (typo with zero in the wrong place) Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Link: https://lore.kernel.org/r/20200124213625.30186-7-pierre-louis.bossart@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>
-