- 20 Dec, 2021 17 commits
-
-
David S. Miller authored
Horatiu Vultur says: ==================== net: lan966x: Add switchdev and vlan support This patch series extends lan966x with switchdev and vlan support. The first patches just adds new registers and extend the MAC table to handle the interrupts when a new address is learn/forget. v7->v8: - remove extra mac learn when the port leaves the bridge - replace memcpy with ether_addr_copy - change the order of operations in lan966x_switch_driver_init/exit - refactor lan966x_port_bridge_flags v6->v7: - fix build issues when compiling as a module v5->v6: - fix issues with the singletones, they were not really singletons - simplify the case where lan966x ports are added to bridges with foreign ports - drop the cases NETDEV_PRE_UP and NETDEV_DOWN - fix the change of MAC address - drop the callbacks .ndo_set_features, .ndo_vlan_rx_add_vid, .ndo_vlan_rx_kill_vid - remove duplicate code when port was added in a vlan, the MAC entries will be added by the fdb v4->v5: - make the notifier_block from lan966x to be singletones - use switchdev_handle_port_obj_add and switchdev_handle_fdb_event_to_device when getting callbacks in the lan966x - merge the two vlan patches in a single one v3->v4: - split the last patch in multiple patches - replace spin_lock_irqsave/restore with spin_lock/spin_unlock - remove lan966x_port_change_rx_flags because it was copying all the frames to the CPU instead of removing all RX filters. - implement SWITCHDEV_ATTR_ID_PORT_PRE_BRIDGE_FLAGS - remove calls to __dev_mc_unsync/sync as they are not needed - replace 0/1 with false/true - make sure that the lan966x ports are not added to bridges that have other interfaces except lan966x - and allow the lan966x ports to be part of only the same bridge. v2->v3: - separate the PVID used when the port is in host mode or vlan unaware - fix issue when the port was leaving the bridge v1->v2: - when allocating entries for the mac table use kzalloc instead of devm_kzalloc - also use GFP_KERNEL instead of GFP_ATOMIC, because is never called in atomic context - when deleting an mac table entry, the order of operations was wrong - if ana irq is enabled make sure it gets disabled when the driver is removed ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Horatiu Vultur authored
Extend lan966x driver with fdb support by implementing the switchdev calls SWITCHDEV_FDB_ADD_TO_DEVICE and SWITCHDEV_FDB_DEL_TO_DEVICE. Signed-off-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Signed-off-by:
-
Horatiu Vultur authored
Currently allow a port to be part or not of the multicast flooding mask. By implementing the switchdev calls SWITCHDEV_ATTR_ID_PORT_BRIDGE_FLAGS and SWITCHDEV_ATTR_ID_PORT_PRE_BRIDGE_FLAGS. Signed-off-by:
-
Horatiu Vultur authored
Extend the driver to support vlan filtering by implementing the switchdev calls SWITCHDEV_OBJ_ID_PORT_VLAN, SWITCHDEV_ATTR_ID_BRIDGE_VLAN_FILTERING Signed-off-by:
-
Horatiu Vultur authored
This patch adds basic support to offload in the HW the forwarding of the frames. The driver registers to the switchdev callbacks and implements the callbacks for attributes SWITCHDEV_ATTR_ID_PORT_STP_STATE and SWITCHDEV_ATTR_ID_BRIDGE_AGEING_TIME. It is not allowed to add a lan966x port to a bridge that contains a different interface than lan966x. Signed-off-by:
-
Horatiu Vultur authored
The function lan966x_port_change_rx_flags() was used only when IFF_PROMISC flag was set. In that case it was setting to copy all the frames to the CPU instead of removing any RX filters. Therefore remove it. Fixes: d28d6d2e ("net: lan966x: add port module support") Signed-off-by:
-
Horatiu Vultur authored
This patch adds support for adding/removing mac entries in the SW list of entries and in the HW table. This is used by the bridge functionality. Signed-off-by:
-
Horatiu Vultur authored
This patch adds support for handling the interrupts generated by the analyzer. Currently, only the MAC table generates these interrupts. The MAC table will generate an interrupt whenever it learns or forgets an entry in the table. It is the SW responsibility figure out which entries were added/removed. Signed-off-by:
-
Horatiu Vultur authored
Extend dt-bindings for lan966x with analyzer interrupt. This interrupt can be generated for example when the HW learn/forgets an entry in the MAC table. Acked-by:
Rob Herring <robh@kernel.org> Reviewed-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Horatiu Vultur authored
This patch adds the registers that will be used to enable switchdev and vlan functionality in the HW. Signed-off-by:
-
David S. Miller authored
Ido Schimmel says: ==================== mlxsw: devlink health reporter extensions This patchset extends the devlink health reporter registered by mlxsw to report new health events and their related parameters. These are meant to aid in debugging hardware and firmware issues. Patches #1-#2 are preparations. Patch #3 adds the definitions of the new events and parameters. Patch #4 extends the health reporter to report the new events and parameters. ==================== Signed-off-by: -
Danielle Ratson authored
Extend the devlink health reporter registered by mlxsw to report new health events and their related parameters. These are meant to aid in debugging of hardware / firmware issues. Beside the test event ('MLXSW_REG_MFDE_EVENT_ID_TEST') that is triggered following the devlink health 'test' sub-command, the new events are used to report the triggering of asserts in firmware code ('MLXSW_REG_MFDE_EVENT_ID_FW_ASSERT') and hardware issues ('MLXSW_REG_MFDE_EVENT_ID_FATAL_CAUSE'). Each event is accompanied with a severity parameter and per-event parameters that are meant to help root cause the detected issue. Signed-off-by:Danielle Ratson <danieller@nvidia.com> Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
-
Danielle Ratson authored
Extend the Monitoring Firmware Debug (MFDE) register with new events and their related parameters. These events will be utilized by devlink-health in the next patch. Signed-off-by:
-
Danielle Ratson authored
Convert a series of if statements that handle different events to a switch case statement. Encapsulate the per-event code in different functions to simplify the code. This is a preparation for subsequent patches that will add more events that need to be handled. Signed-off-by:
-
Danielle Ratson authored
Currently, the MFDE register field names are using the convention: reg_mfde_<NAME_OF_FIELD>, and do not consider the name of the MFDE event. Fix the field names so they fit the more accurate convention: reg_mfde_<NAME_OF_EVENT>_<NAME_OF_FIELD>. Signed-off-by:
-
Manish Chopra authored
Commit 0a6890b9 ("bnx2x: Utilize FW 7.13.15.0.") added validation for fastpath HSI versions for different client init which was not meant for SR-IOV VF clients, which resulted in firmware asserts when running VF clients with different fastpath HSI version. This patch along with the new firmware support in patch #1 fixes this behavior in order to not validate fastpath HSI version for the VFs. Fixes: 0a6890b9 ("bnx2x: Utilize FW 7.13.15.0.") Signed-off-by:
Manish Chopra <manishc@marvell.com> Signed-off-by:
Prabhakar Kushwaha <pkushwaha@marvell.com> Signed-off-by:
Alok Prasad <palok@marvell.com> Signed-off-by:
Ariel Elior <aelior@marvell.com> Signed-off-by:
-
Manish Chopra authored
This new firmware addresses few important issues and enhancements as mentioned below - - Support direct invalidation of FP HSI Ver per function ID, required for invalidating FP HSI Ver prior to each VF start, as there is no VF start - BRB hardware block parity error detection support for the driver - Fix the FCOE underrun flow - Fix PSOD during FCoE BFS over the NIC ports after preboot driver - Maintains backward compatibility This patch incorporates this new firmware 7.13.21.0 in bnx2x driver. Signed-off-by:
-
- 19 Dec, 2021 14 commits
-
-
David S. Miller authored
Simon Horman says: ==================== allow user to offload tc action to net device Baowen Zheng says: Allow use of flow_indr_dev_register/flow_indr_dev_setup_offload to offload tc actions independent of flows. The motivation for this work is to prepare for using TC police action instances to provide hardware offload of OVS metering feature - which calls for policers that may be used by multiple flows and whose lifecycle is independent of any flows that use them. This patch includes basic changes to offload drivers to return EOPNOTSUPP if this feature is used - it is not yet supported by any driver. Tc cli command to offload and quote an action: # tc qdisc del dev $DEV ingress && sleep 1 || true # tc actions delete action police index 200 || true # tc qdisc add dev $DEV ingress # tc qdisc show dev $DEV ingress # tc actions add action police rate 100mbit burst 10000k index 200 skip_sw # tc -s -d actions list action police total acts 1 action order 0: police 0xc8 rate 100Mbit burst 10000Kb mtu 2Kb action reclassify overhead 0b linklayer ethernet ref 1 bind 0 installed 142 sec used 0 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 skip_sw in_hw in_hw_count 1 used_hw_stats delayed # tc filter add dev $DEV protocol ip parent ffff: \ flower skip_sw ip_proto tcp action police index 200 # tc -s -d filter show dev $DEV protocol ip parent ffff: filter pref 49152 flower chain 0 filter pref 49152 flower chain 0 handle 0x1 eth_type ipv4 ip_proto tcp skip_sw in_hw in_hw_count 1 action order 1: police 0xc8 rate 100Mbit burst 10000Kb mtu 2Kb action reclassify overhead 0b linklayer ethernet ref 2 bind 1 installed 300 sec used 0 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 skip_sw in_hw in_hw_count 1 used_hw_stats delayed # tc filter add dev $DEV protocol ipv6 parent ffff: \ flower skip_sw ip_proto tcp action police index 200 # tc -s -d filter show dev $DEV protocol ipv6 parent ffff: filter pref 49151 flower chain 0 filter pref 49151 flower chain 0 handle 0x1 eth_type ipv6 ip_proto tcp skip_sw in_hw in_hw_count 1 action order 1: police 0xc8 rate 100Mbit burst 10000Kb mtu 2Kb action reclassify overhead 0b linklayer ethernet ref 3 bind 2 installed 761 sec used 0 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 skip_sw in_hw in_hw_count 1 used_hw_stats delayed # tc -s -d actions list action police total acts 1 action order 0: police 0xc8 rate 100Mbit burst 10000Kb mtu 2Kb action reclassify overhead 0b linklayer ethernet ref 3 bind 2 installed 917 sec used 0 sec Action statistics: Sent 0 bytes 0 pkt (dropped 0, overlimits 0 requeues 0) backlog 0b 0p requeues 0 skip_sw in_hw in_hw_count 1 used_hw_stats delayed Changes between v7 and v8: * Rename enum offload_act_command as enum flow_offload_act_command * Add a single patch to rename exts stats update function for readability. * Fix the kernel test robot issue reported by Oliver Sang. Changes between v6 and v7: * Add a single patch to rename offload functions with offload for readability. * Post 166b6a46 ("flow_offload: return EOPNOTSUPP for the unsupported mpls action type") as a bug fix to netdev. * Rename enum flow_act_command as enum flow_offload_act_command * Rename the new added action offload setup ops with offload instead of flow * Rename the new added action offload function with offload instead of flow. * Add more selftest cases for validate filter and actions. Changes between v5 and v6: * Fix issue reported by Dan Carpenter found using Smatch. Changes beteeen v4 and v5: * Made changes of code style according to the public review comments. * Add a fix for unsupported mpls action type in flow action setup stage. * Add ops to tc_action_ops for flow action setup to facilitate adding a standalone action module. * Add notification process when deleting action in reoffload process. Changes between v3 and v4: * Made changes according to the public review comments. * Validate flags inside tcf_action_init() instead of creating new tcf_exts_validate_actions() function. * Exactly match when validating flags of actions and filters. * Add index to flow_action_entry for driver to identify actions. Changes between v2 and v3: * Made changes according to the review comments. * Delete in_hw and not_in_hw flag and user can judge if the action is offloaded to any hardware by in_hw_count. * Split the main patch of the action offload to three single patch to facilitate code review. Changes between v1 and v2: * Add the skip_hw/skip_sw for user to specify if the action should be in hardware or software. * Fix issue of sleeping function called from invalid context. * Change the action offload/delete from batch to one by one. * Add some parameters to the netlink message for user space to look up the offload status of the actions. * Add reoffload process to update action hw_count when driver is inserted or removed. Changes between v1 and RFC: * Fix robot test failure. * Change actions offload process in action add function rather than action init. * Change actions offload delete process after tcf_del_notify to keep undeleted actions. * Add process to update actions stats from hardware. ==================== Signed-off-by: -
Baowen Zheng authored
Add selftest cases in action police with skip_hw. Add selftest case to validate flags of filter and action. These tests depend on corresponding iproute2 command support. Signed-off-by:
Baowen Zheng <baowen.zheng@corigine.com> Signed-off-by:
Simon Horman <simon.horman@corigine.com> Signed-off-by:
-
Baowen Zheng authored
Add process to validate flags of filter and actions when adding a tc filter. We need to prevent adding filter with flags conflicts with its actions. Signed-off-by:
Louis Peens <louis.peens@corigine.com> Signed-off-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
-
Baowen Zheng authored
Add reoffload process to update hw_count when driver is inserted or removed. We will delete the action if it is with skip_sw flag and not offloaded to any hardware in reoffload process. When reoffloading actions, we still offload the actions that are added independent of filters. Signed-off-by:
-
Baowen Zheng authored
Save full action flags and return user flags when return flags to user space. Save full action flags to distinguish if the action is created independent from classifier. We made this change mainly for further patch to reoffload tc actions. Signed-off-by:
-
Baowen Zheng authored
When collecting stats for actions update them using both hardware and software counters. Stats update process should not run in context of preempt_disable. Signed-off-by:
-
Baowen Zheng authored
Rename exts stats update functions with hw for readability. We make this change also to update stats from hw for an action when it is offloaded to hw as a single action. Signed-off-by:
-
Baowen Zheng authored
We add skip_hw and skip_sw for user to control if offload the action to hardware. We also add in_hw_count for user to indicate if the action is offloaded to any hardware. Signed-off-by:
-
Baowen Zheng authored
Use flow_indr_dev_register/flow_indr_dev_setup_offload to offload tc action. We need to call tc_cleanup_flow_action to clean up tc action entry since in tc_setup_action, some actions may hold dev refcnt, especially the mirror action. Signed-off-by:
-
Baowen Zheng authored
Add a new ops to tc_action_ops for flow action setup. Refactor function tc_setup_flow_action to use this new ops. We make this change to facilitate to add standalone action module. We will also use this ops to offload action independent of filter in following patch. Signed-off-by:
-
Baowen Zheng authored
To improves readability, we rename offload functions with offload instead of flow. The term flow is related to exact matches, so we rename these functions with offload. We make this change to facilitate single action offload functions naming. Signed-off-by:
-
Baowen Zheng authored
Add index to flow_action_entry structure and delete index from police and gate child structure. We make this change to offload tc action for driver to identify a tc action. Signed-off-by:
-
Baowen Zheng authored
A follow-up patch will allow users to offload tc actions independent of classifier in the software datapath. In preparation for this, teach all drivers that support offload of the flow tables to reject such configuration as currently none of them support it. Signed-off-by:
-
Baowen Zheng authored
Fill flags to action structure to allow user control if the action should be offloaded to hardware or not. Signed-off-by:
-
- 18 Dec, 2021 9 commits
-
-
Yajun Deng authored
The xdp_rxq_info_unreg() called by xdp_rxq_info_reg() is meaningless when dev is NULL, so move the if dev statements to the first. Signed-off-by:
Yajun Deng <yajun.deng@linux.dev> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queueDavid S. Miller authored
Tony Nguyen says: ==================== 40GbE Intel Wired LAN Driver Updates 2021-12-17 Brett Creeley says: This patch series adds support in the iavf driver for communicating and using VIRTCHNL_VF_OFFLOAD_VLAN_V2. The current VIRTCHNL_VF_OFFLOAD_VLAN is very limited and covers all 802.1Q VLAN offloads and filtering with no granularity. The new VIRTCHNL_VF_OFFLOAD_VLAN_V2 adds more granularity, flexibility, and support for 802.1ad offloads and filtering. This includes the VF negotiating which VLAN offloads/filtering it's allowed, where VLAN tags should be inserted and/or stripped into and from descriptors, and the supported VLAN protocols. ==================== Signed-off-by: -
Jakub Kicinski authored
Mat Martineau says: ==================== mptcp: Miscellaneous changes for 5.17 These are three unrelated patches that we've been testing in the MPTCP tree. Patch 1 modifies the packet scheduler that picks which TCP subflow is used for each chunk of outgoing data. The updated scheduler improves throughput on multiple-subflow connections. Patch 2 updates a selftest to verify recent TCP_ULP sockopt changes on MPTCP fallback sockets. Patch 3 cleans up some unnecessary comparisons with an 8-bit value. ==================== Link: https://lore.kernel.org/r/20211217233702.299461-1-mathew.j.martineau@linux.intel.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Jean Sacren authored
entry->addr.id is u8 with a range from 0 to 255 and MAX_ADDR_ID is 255. We should drop both false expressions of (entry->addr.id > MAX_ADDR_ID). We should also remove the obsolete parentheses in the first if branch. Use U8_MAX for MAX_ADDR_ID and add a comment to show the link to mptcp_addr_info.id as suggested by Mr. Matthieu Baerts. Reviewed-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
Jean Sacren <sakiwit@gmail.com> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Florian Westphal authored
The kernel will crash without 'mptcp: clear 'kern' flag from fallback sockets' change. Since this doesn't slow down testing in a noticeable way, run this unconditionally. The explicit test did not catch this, because the check was done for tcp socket returned by 'socket(.. IPPROTO_TCP) rather than a tcp socket returned by accept() on a mptcp listen fd. Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Paolo Abeni authored
The MPTCP packet scheduler has sub-optimal behavior with asymmetric subflows: if the faster subflow-level cwin is closed, the packet scheduler can enqueue "too much" data on a slower subflow. When all the data on the faster subflow is acked, if the mptcp-level cwin is closed, and link utilization becomes suboptimal. The solution is implementing blest-like[1] HoL-blocking estimation, transmitting only on the subflow with the shorter estimated time to flush the queued memory. If such subflows cwin is closed, we wait even if other subflows are available. This is quite simpler than the original blest implementation, as we leverage the pacing rate provided by the TCP socket. To get a more accurate estimation for the subflow linger-time, we maintain a per-subflow weighted average of such info. Additionally drop magic numbers usage in favor of newly defined macros and use more meaningful names for status variable. [1] http://dl.ifip.org/db/conf/networking/networking2016/1570234725.pdf Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/137Reviewed-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Dan Carpenter authored
The debugfs_create_dir() function never returns NULL. It does return error pointers but in normal situations like this there is no need to check for errors. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Link: https://lore.kernel.org/r/20211217071037.GE26548@kiliSigned-off-by:
-
Dan Carpenter authored
There is already an "int err" declared at the start of the function so re-use that instead of declaring a shadow err variable. Signed-off-by:
-
Gerhard Engleder authored
The following warning is fixed with additional config dependencies: s390-linux-ld: drivers/net/ethernet/engleder/tsnep_main.o: in function `tsnep_probe': tsnep_main.c:(.text+0x1de6): undefined reference to `devm_ioremap_resource' Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Gerhard Engleder <gerhard@engleder-embedded.com> Link: https://lore.kernel.org/r/20211216200154.1520-1-gerhard@engleder-embedded.comSigned-off-by:
-
