- 21 Apr, 2023 5 commits
-
-
Richard Leitner authored
Add Innolux G070ACE-L01 7" WVGA (800x480) TFT LCD panel compatible string. Signed-off-by:
Richard Leitner <richard.leitner@skidata.com> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by:
Douglas Anderson <dianders@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230201-innolux-g070ace-v2-1-2371e251dd40@skidata.com
-
Thomas Zimmermann authored
Move code from ad-hoc fbdev callbacks into DRM client functions and remove the old callbacks. The functions instruct the client to poll for changed output or restore the display. The DRM core calls both, the old callbacks and the new client helpers, from the same places. The new functions perform the same operation as before, so there's no change in functionality. Replace all code that initializes or releases fbdev emulation throughout the driver. Instead initialize the fbdev client by a single call to armada_fbdev_setup() after armada has registered its DRM device. As in most drivers, aramda's fbdev emulation now acts like a regular DRM client. The fbdev client setup consists of the initial preparation and the hot-plugging of the display. The latter creates the fbdev device and sets up the fbdev framebuffer. The setup performs display hot-plugging once. If no display can be detected, DRM probe helpers re-run the detection on each hotplug event. A call to drm_dev_unregister() releases the client automatically. No further action is required within armada. If the fbdev framebuffer has been fully set up, struct fb_ops.fb_destroy implements the release. For partially initialized emulation, the fbdev client reverts the initial setup. Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
Javier Martinez Canillas <javierm@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230330073046.7150-5-tzimmermann@suse.de
-
Thomas Zimmermann authored
Initialize the fbdev client in the fbdev code with empty helper functions. Also clean up the client. The helpers will later implement various functionality of the DRM client. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Only build armada's fbdev emulation if CONFIG_DRM_FBDEV_EMULATION has been enabled. No functional changes, but allows to build armada without fbdev. Signed-off-by:
Sui Jingfeng <suijingfeng@loongson.cn> Link: https://patchwork.freedesktop.org/patch/msgid/20230330073046.7150-3-tzimmermann@suse.de
-
Thomas Zimmermann authored
Include <linux/of.h> to get declarations of of_node_put() and of_device_is_available(). No functional changes. Signed-off-by:
-
- 20 Apr, 2023 20 commits
-
-
Nikita Travkin authored
This bridge doesn't actually implement HPD due to it being way too slow but instead expects the panel driver to wait enough to assume HPD is asserted. However some panels (such as the generic 'edp-panel') expect the bridge to deal with the delay and pass maximum delay to the aux instead. In order to support such panels, add a dummy implementation of wait that would just sleep the maximum delay and assume no failure has happened. Signed-off-by:
Nikita Travkin <nikita@trvn.ru> Reviewed-by:
-
Thomas Zimmermann authored
Include <asm-generic/fb.h> and set the required preprocessor tokens correctly. x86 now implements its own set of fb helpers, but still follows the overall pattern of the other <asm/fb.h> files. v3: * clarified commit message Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Helge Deller <deller@gmx.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230417125651.25126-20-tzimmermann@suse.de
-
Thomas Zimmermann authored
Replace sparc64's fb_pgprotect() with the generic one from <asm-generic/fb.h>. On sparc, pgprot_writecombine() and pgprot_noncached() are the same; hence no functional changes v3: * use default implementation for fb_pgprotect() on sparc64 (Arnd) v2: * restore the original fb_pgprotect() Signed-off-by:
-
Thomas Zimmermann authored
Other architectures implment fb_is_primary_device() in a source file. Do the same on sparc. No functional changes, but allows to remove several include statement from <asm/fb.h>. v2: * don't include <asm/prom.h> in header file Signed-off-by:
-
Thomas Zimmermann authored
Replace the architecture's fbdev helpers with the generic ones from <asm-generic/fb.h>. No functional changes. v2: * use default implementation for fb_pgprotect() (Arnd) Signed-off-by:
John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de> Acked-by:
-
Thomas Zimmermann authored
Replace the architecture's fb_is_primary_device() with the generic one from <asm-generic/fb.h>. No functional changes. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Acked-by:
-
Thomas Zimmermann authored
Replace the architecture's fbdev helpers with the generic ones from <asm-generic/fb.h>. On PARISC, pgprot_writecombine() and pgprot_noncached() are the same; hence no functional changes. v3: * use default implementation for fb_pgprotect() (Arnd) Signed-off-by:
-
Thomas Zimmermann authored
Move PARISC's implementation of fb_is_primary_device() into the architecture directory. This the place of the declaration and where other architectures implement this function. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Fix trailing whitespaces. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
STI core files have been located in console and fbdev code. Move the source code and header to the directories for video helpers. Also update the config and build rules such that the code depends on the config symbol CONFIG_STI_CORE, which STI console and STI framebuffer select automatically. Cleans up the console makefile and prepares PARISC to implement fb_is_primary_device() within the arch/ directory. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Fix trailing whitespaces. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Replace the architecture's fb_is_primary_device() with the generic one from <asm-generic/fb.h>. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Replace the architecture's fb_is_primary_device() with the generic one from <asm-generic/fb.h>. No functional changes. v2: * provide empty fb_pgprotect() on non-MMU systems Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Acked-by:
-
Thomas Zimmermann authored
Merge all variants of fb_pgprotect() into a single function body. There are two different cases for MMU systems. For non-MMU systems, the function body will be empty. No functional changes, but this will help with the switch to <asm-generic/fb.h>. Signed-off-by:
-
Thomas Zimmermann authored
Replace the architecture's fbdev helpers with the generic ones from <asm-generic/fb.h>. No functional changes. v2: * use default implementation for fb_pgprotect() (Arnd) Signed-off-by:
-
Thomas Zimmermann authored
Replace the architecture's fb_is_primary_device() with the generic one from <asm-generic/fb.h>. No functional changes. Signed-off-by:
-
Thomas Zimmermann authored
Replace the architecture's fbdev helpers with the generic ones from <asm-generic/fb.h>. No functional changes. v2: * use default implementation for fb_pgprotect() (Arnd) Signed-off-by:
-
Thomas Zimmermann authored
Replace the architecture's fbdev helpers with the generic ones from <asm-generic/fb.h>. No functional changes. v2: * use default implementation for fb_pgprotect() (Arnd) Signed-off-by:
-
Thomas Zimmermann authored
Replace the architecture's fbdev helpers with the generic ones from <asm-generic/fb.h>. On arc, pgprot_writecombine() and pgprot_noncached() are the same; hence no functional changes. v3: * use default implementation for fb_pgprotect() (Arnd) Signed-off-by:
-
Thomas Zimmermann authored
Generic implementations of fb_pgprotect() and fb_is_primary_device() have been in the source code for a long time. Prepare the header file to make use of them. Improve the code by using an inline function for fb_pgprotect() and by removing include statements. The default mode set by fb_pgprotect() is now writecombine, which is what most platforms want. Symbols are protected by preprocessor guards. Architectures that provide a symbol need to define a preprocessor token of the same name and value. Otherwise the header file will provide a generic implementation. This pattern has been taken from <asm/io.h>. v3: * include the correct header files v2: * use writecombine mappings by default (Arnd) Signed-off-by:
-
- 19 Apr, 2023 2 commits
-
-
Maíra Canal authored
Currently, drm_gem_fb_create() doesn't check if the pixel format is supported, which can lead to the acceptance of invalid pixel formats e.g. the acceptance of invalid modifiers. Therefore, add a check for valid formats on drm_gem_fb_create(). Note that this check is only valid for atomic drivers, because, for non-atomic drivers, checking drm_any_plane_has_format() is not possible since the format list for the primary plane is fake, and we'd therefore reject valid formats. Adding this check to drm_gem_fb_create() will guarantee that the igt@kms_addfb_basic@addfb25-bad-modifier IGT test passes for drivers using this callback. This commit is a recapture of a series sent a while ago. Initially, I sent a patch [1] similar to this one in which I introduced the format check to drm_gem_fb_create(). Based on the feedback on the patch, I placed the check inside framebuffer_check() [2] so that it wouldn't be needed to hit any driver-specific code path when the check fails. Therefore, we could remove the check from the specific drivers (i915, amdgpu, and vmwgfx). But, with some new feedback, it was shown that introducing this check inside framebuffer_check() is problematic for the i915 driver [3]. For the i915 driver, in the legacy case, in which we don't get the modifier from the userspace, i915's fb_create hook computes the right modifier, which isn't necessarily linear. Therefore, if we check the modifier before that point, we might get wrong answers. So, I kept the check inside the i915 driver and removed the check from amdgpu and vmwgfx [4]. But, this yet hasn't solved the i915 problem [5]. As we cannot add the check inside framebuffer_check() without affecting the i915 behavior, this commit went back to the original patch. This way we can guarantee a more uniform behavior from the drivers that use the drm_gem_fb_create() callback. [1] https://lore.kernel.org/dri-devel/20230103125322.855089-1-mcanal@igalia.com/T/ [2] https://lore.kernel.org/dri-devel/20230109105807.18172-1-mcanal@igalia.com/T/ [3] https://lore.kernel.org/dri-devel/Y8AAdW2y7zN7DCUZ@intel.com/ [4] https://lore.kernel.org/dri-devel/20230113112743.188486-1-mcanal@igalia.com/T/ [5] https://lore.kernel.org/dri-devel/Y8FXWvEhO7GCRKVJ@intel.com/Signed-off-by:
Maíra Canal <mcanal@igalia.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Maíra Canal <mairacanal@riseup.net> Link: https://patchwork.freedesktop.org/patch/msgid/20230412142923.136707-1-mcanal@igalia.com
-
Danilo Krummrich authored
It already happend a few times that patches slipped through which implemented access to an entity through a job that was already removed from the entities queue. Since jobs and entities might have different lifecycles, this can potentially cause UAF bugs. In order to make it obvious that a jobs entity pointer shouldn't be accessed after drm_sched_entity_pop_job() was called successfully, set the jobs entity pointer to NULL once the job is removed from the entity queue. Moreover, debugging a potential NULL pointer dereference is way easier than potentially corrupted memory through a UAF. Signed-off-by:
Danilo Krummrich <dakr@redhat.com> Link: https://lore.kernel.org/r/20230418100453.4433-1-dakr@redhat.comReviewed-by:
Luben Tuikov <luben.tuikov@amd.com> Signed-off-by:
-
- 17 Apr, 2023 13 commits
-
-
Markus Elfring authored
The address of a data structure member was determined before a corresponding null pointer check in the implementation of the functions “nvkm_fanpwm_create” and “nvkm_fantog_create”. Thus avoid the risk for undefined behaviour by moving the assignment for the data structure member “fan” behind two null pointer checks. This issue was detected by using the Coccinelle software. Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Reviewed-by:
Karol Herbst <kherbst@redhat.com> Signed-off-by:
-
Markus Elfring authored
The variable “pbus” was read only once in the implementation of the function “nvkm_pcie_set_link”. Thus move the usage of an expression into a parameter for a function call. Signed-off-by:
-
Markus Elfring authored
The address of a data structure member was determined before a corresponding null pointer check in the implementation of the function “nvkm_pcie_set_link”. Thus avoid the risk for undefined behaviour by moving the assignment for the variable “subdev” behind some condition checks. This issue was detected by using the Coccinelle software. Signed-off-by:
-
Markus Elfring authored
The address of a data structure member was determined before a corresponding null pointer check in the implementation of the function “nvkm_pstate_new”. Thus avoid the risk for undefined behaviour by moving the assignment for the variable “cstate” behind the null pointer check. This issue was detected by using the Coccinelle software. Signed-off-by:
-
Markus Elfring authored
drm/nouveau/bios/power_budget: Move an expression into a macro call parameter in nvbios_power_budget_header() The address of a data structure member was determined before a corresponding null pointer check in the implementation of the function “nvbios_power_budget_header”. Thus avoid the risk for undefined behaviour by moving the usage of an expression into a parameter for a macro call in one if branch. This issue was detected by using the Coccinelle software. Signed-off-by:
-
Markus Elfring authored
Five strings which did not contain a data format specification should be put into a sequence. Thus use the corresponding function “seq_puts”. This issue was detected by using the Coccinelle software. Signed-off-by:
-
Markus Elfring authored
A single character (line break) should be put into a sequence. Thus use the corresponding function “seq_putc”. This issue was detected by using the Coccinelle software. Signed-off-by:
-
Markus Elfring authored
drm/nouveau/debugfs: Move a variable assignment behind a null pointer check in nouveau_debugfs_pstate_get() The address of a data structure member was determined before a corresponding null pointer check in the implementation of the function “nouveau_debugfs_pstate_get”. Thus avoid the risk for undefined behaviour by moving the assignment for the variable “ctrl” behind the null pointer check. This issue was detected by using the Coccinelle software. Signed-off-by:
-
Markus Elfring authored
drm/nouveau/debugfs: Move an expression into a function call parameter in nouveau_debugfs_pstate_set() The address of a data structure member was determined before a corresponding null pointer check in the implementation of the function “nouveau_debugfs_pstate_set”. Thus avoid the risk for undefined behaviour by moving the usage of an expression into a parameter for a function call at the end. This issue was detected by using the Coccinelle software. Signed-off-by:
-
Konrad Dybcio authored
Some Lenovo J606F tablets come with a 2K (2000x1200) 60Hz 11" 5:3 video mode display. Add support for these panels. Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Reviewed-by:
Jianhua Lu <lujianhua000@gmail.com> Signed-off-by:
Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by:
Neil Armstrong <neil.armstrong@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20230412-topic-lenovopanel-v3-4-bcf9ba4de46f@linaro.org
-
Konrad Dybcio authored
Some bright vendors mount their display panels upside down. Add the required pieces to allow for accounting for that. Reviewed-by:
-
Konrad Dybcio authored
This chip supports controlling the backlight via DCS commands, on at least some panels. Add support for doing so. Note this may only concern the NT36523*W* variant. Nobody knows, really, there's no docs. Reviewed-by:
-
Konrad Dybcio authored
Some Lenovo J606F tablets come with a 2K (2000x1200) 60Hz 11" 5:3 video mode display. Document it and allow rotation while at it (Lenovo mounted it upside down!). Reviewed-by:
-
